|
| 1 | M & L for complete removal of existing treatment of old plastered surfaces of wall and applying Two coats of oil bound distemper having VOC content lessthan 50 gms /Ltr of approved manufacturer of required shade and colour, over a coat of primer over & including 1mm thick finished coat of white wall care white putty (JK/Birla), complete all as specified and directed. |
| 2 | M&L for washing, rubbing down, preparing and stopping of old distempered surfaces, removing nails, making good holes, cracks etc and applying One coat of oil bound distemper on wall white or tinted, complete all as specified and directed. |
| 3 | Material & Labour for complete removal of existing treatement of old plastered surfaces of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & ungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over plastering surfaces, complete all as specified and as directed.MAKE :- ASIAN/APEX/BERGER (Weather coat all guard) |
| 4 | M&L for preparation of old decorated plaster or un- plastered surfaces and providing One coat of white wash on wall including cornices, complete all as specified and directed. |
| 5 | All as per item No. 4.00 here in before but on ceilings complete all as specified and directed. |
| 6 | M & L for preparation of old decorated plastered or unplastered surfaces of ceiling and applying One coat of Oil bound distemper, complete all as specified and directed. |
| 7 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth & applying One coat of synthetic enamel paint of approved quality, tint to achieve glossy finish, complete all as specified and directed. |
| 8 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth & applying Two coat of synthetic enamel paint of approved quality, tint to achieve glossy finish, complete all as specified and directed. |
| 9 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth & applying One coat of synthetic enamel paint of approved quality, tint to achieve glossy finish, complete all as specified and directed. |
| 10 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth & applying Two coat of synthetic enamel paint of approved quality, tint to achieve glossy finish, complete all as specified and directed. |
| 11 | M&L for washing, rubbing down, preparing and stopping of old painted surfaces, removing nails, making good holes, cracks etc and applying One coat of cement base paint, complete all as specified and directed. |
| 12 | M & L for complete removal of existing treatment of wall, removing nails, making good holes, cracks etc and applying Two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 13 | M & L for preparation old treated or untreated concrete surface of width or girth exceeding 10cm and applying two coats of synthetic enamel paint of Ist quality over a coat of primer complete all as specified and directed |
| 14 | M & L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm height with synthetic enamel paint of approved tint complete all as specified and directed. |
| 15 | M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of stone masonary surfaces finished even and smooth without using extra cement including taking down old plaster surface, complete all as specified and directed. |
| 16 | M&L 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement including taking down old plaster surface, complete all as specified and directed. |
| 17 | M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement on fair faces of brick work or concrete surfaces, finished even and smooth including taking down old plaster surface, complete all as specified and directed.Note : WPC measured and paid separately . |
| 18 | M&L for rough cast plaster mix with crusted stone (6-10mm), sand and cement in the ratio 1: 1.5: 1, over 15mm thick rendering in CM 1:4 on stone / brick masonary wall surfaces including taking down old plaster surface, complete all as specified and directed. |
| 19 | Dismantling loose /disintegrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and dobbing out with PCC 1:1:5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces of reinforcement and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed. |
| 20 | M&L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm average thick wall care putty, complete all as specified and directed. |
| 21 | M&L for preparation of newly plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed. |
| 22 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed. |
| 23 | M & L for newly rough cast plastered surfaces of wall and applying two coats of weather proof acrylic emulsion paint over a coat of primer, complete all as specified and directed.MAKE :- ASIAN/APEX/BERGER (Weather coat all guard) Please Enable Macros to View BoQ information |
| 24 | M & L for newly rough cast plastered surfaces of wall and applying two coats of weather proof acrylic emulsion paint over a coat of primer, complete all as specified and directed.MAKE :- ASIAN/APEX/BERGER (Weather coat all guard) Please Enable Macros to View BoQ information |