|
| 1 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the materials within 50 metres lead: a) Of sectional area 40 sqcm and above |
| 2 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead: C) 150 mm dia. Pipe |
| 3 | Dismantling cement asbestos ceiling/ hard board ceiling/ any type ceiling or partition walls including stackling of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 4 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS:733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm diameter with necessary cadmium plated mavhine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge (level adjusting hangers, ceiling cleats and expansion hold fasterners to be paid for separately). |
| 5 | Providing and fixing 6 mm diameter G.I. level adjusting hangers (up to 1200 mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3 mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm diameter and 50 mm long, complete as per direction of Engineer-in-charge. |
| 6 | Supplying,fitting and fixing PVC louvers with SS Clip as required on the top of block board including providing corner edge beadinf (block board and wooden boarding to be paid separately) as directed by the Engineer-in -charge. |
| 7 | Carriage of earth/ unserviceable materials.5 to 10 KM ie (16.86 X 10 KM X Rs 20.830 Cum =Rs 3511.94) |
| 8 | Wiring in looping in system with 1.5 sqmm DGSD approved 250 grade single core multistrand conductor TRS or PVC cable using heavy gauge of 16 SWG 19mm dia rigid PVC pipe including supplying & fitting conduit bends, tees, joints, boxes, etc. as necessary with M.S or wooden box for housing switches sockets fan regulator & bell push etc. covered with 3mm thick transparent perspire sheet cover duly painted from inside to match the colour of the wall or as directed by the Engineer in charge complete with 5 Amp FT switch, ceiling rose etc. |
| 9 | a) Long point upto 10 mts |
| 10 | b) Medium point upto 6 mts |
| 11 | c) Short point upto 3 mts |
| 12 | Wiring as in item No.11 above to Light Plug Point when fixed elsewhere with continuous earth wire complete. |
| 13 | a) Long point upto 10 mts |
| 14 | b) Medium point upto 6 mts |
| 15 | Wiring as in item No.11 above to Power Plug Point with continuous earth wire. |
| 16 | a) Long point upto 10 mts |
| 17 | Wiring as in item No.11 above to Ceiling Fan/Exhaust Fan Point. |
| 18 | a) Long point upto 10 mts |
| 19 | Drawing Main and Sub-Main Line wiring as in item No.11 above with TRS or PVC Single Core Multistrand 250V Grade Copper Conductor Cable. |
| 20 | a) With 2x2.5 mm2 copper wire |
| 21 | b) With 2x4 mm2 copper wire |
| 22 | d) With 2x10 mm2 copper wire |
| 23 | Drawing 3 Phase Main Line 4 wire with DGSD approved VIR or PVC cable 660 V grade in Heavy Gouge 16 SWG Regid pipe including with all necessary accessories. |
| 24 | d) With 4x10 mm2 copper conductor multistrand for earthing |
| 25 | Supplying, fitting and fixing of Load Kontaket Miniature Circuit Breakers DX3 MCB's for AC application till 63A. |
| 26 | C. Double pole 415 V |
| 27 | b) 6-32 Amp |
| 28 | F. Four Pole 415 V |
| 29 | b) 6-32 Amp |
| 30 | Supplying, fitting and fixing of DX3 Isolators for AC applications upto 125A. |
| 31 | A. Double pole 240 V |
| 32 | c) 63 Amp |
| 33 | C. Four Pole 415 V |
| 34 | d) 100 Amp |
| 35 | Supplying, fitting and fixing of Distribution Board SPN DB's for MCB, Isolator, RCCB and RCBO. |
| 36 | B. IP 43- #1K 09 with metal door |
| 37 | d) 16 way + 16 module |
| 38 | Supplying, fitting and fixing of Distribution Board Ekinox3 TPN DB VTPN for DX3 MCB DB's |
| 39 | D. IP 54 - #1 K09 |
| 40 | d) 12 Way 8 + 36 Module |
| 41 | Supplying, fitting and fixing of LED PANEL CEILING LIGHTING concealed with all necessary accessories. |
| 42 | c) 2x2 (595x595x70) mm recess mounting luminaire suitable for ceiling. |
| 43 | ii) 34W |
| 44 | Supplyin, fitting and fixing of LED DOWNLIGHTS surface or wall mounted with all necessary accessories. Philips/Jaguar/equiv.c) Recess mounted downlighter with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver.v) 24 W Ceiling cutout: dia 175 mm, height 92 mm |
| 45 | Armoured cable (4 core) 25 sq mm Please Enable Macros to View BoQ information |