Name of Work:- Repair and Renovation of PWD IB at Paralakhemundi in the district of Gajapati. | Sl. No. | Item Description | |
| 1 | Dismantling 2.50 cm thick grading concrete from roof slab including cleaning the roof surface and lowering and removing the debris with 50m lead including cost of all labour, Labour CESS and T&P. etc required to complete the work in all respect, as per direction of Engineer in charge. | | 2 | Providing 4.00 cm thick grading concrete(1:2:4) using 12 mm and down grade size HG Chips and screened & washed sharp river sand of approved quality from approved quarry and finished smooth, including watering and curing for the required period including cost, conveyance, royalties of all materials, cost of all labour, labour CESS, T&P etc. required to complete the work in all respect as per direction of the Engineer in charge. | | 3 | Providing 6mm. thick cement plaster in cement mortar (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment using good quality screened and washed river sand, including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, labour CESS,T&P, and scaffolding as required to complete the work in all respect as per the Direction of the Engineer in charge . | | 4 | Removing old cement/lime plaster from walls including racking out joints 12mm deep and removing the debris with in 50m lead including cost of all labour, Labour CESS and T&P. etc required to complete the work in all respect, as per direction of Engineer in charge. | | 5 | Providing 12 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as required to complete the work in all respect as per the Direction of the Engineer in charge . | | 6 | Fly ash brick masonry in cement mortar (1:6) in Super structure using Fly ash bricks of (23x11x8cm) size having a crushing strength of not less than 75 kg per Sq.cm with dimensional tolerance + 8 percent after immersing Bricks in water till saturation before use , including splays cutting, circular molding, chamfering, corbelling and all similar type of operations with all necessary projections watering, curing etc. complete including cost, conveyance, royalties, of all materials, cost of all labour, labour CESS T&P ,Scaffolding as required etc. complete in all respect as drawing and technical specifications and as per directed by the Engineer in charge. | | 7 | Providing and Finishing surfaces of walls & ceiling with cement based wall putty [ water based ] of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging and cost , conveyance of all the materials ,including cost of all labour, labour CESS and T&P required to complete the work in all respect as per specification and direction of the Engineer in charge. | | 8 | Providing and Painting the surface of the walls with one coat of wall primer(water based) of approved quality after cleaning the plastered surface perfectly by watering and brushing including cost , conveyance of all material, brushes, all labour, scaffolding, T&P etc. required to complete the work in all respect as per specification and direction of the Engineer in charge. | | 9 | Finishing interior surfaces of walls with two coats of Plastic emulsion paint of approved quality and shade from a recognized company to give an even shade including preparation of the surface before applying , including cost of scaffolding ,staging and cost ,conveyance of all materials ,cost of all labour, labour CESS and T&P required to complete the work in all respect as per specification and direction of the Engineer in charge. | | 10 | Providing & painting exterior surfaces of walls with two coats of Weather seal coat paint of approved quality and shade from a recognized company to give an even shade, after cleaning the plastered surface perfectly by watering and brushing including cost of scaffolding ,staging and cost ,conveyance of all materials ,all labour, labour CESS and T&P required to complete the work in all respect as per specification and direction of the Engineer in charge. | | 11 | Painting 2 (Two) coats with synthetic enamel paint to iron work over a coat of primer of approved colour, shade after sand papering , polishing the surface including cost, conveyance of all materials, all labour, labour CESS T&P , scaffolding etc. required to complete the work in all respect as per drawing and technical specification and direction of Engineer in charge. | | 12 | Providing and laying cement concrete (1:2:4) using 12mm size black hard granite crusher broken chips and screened and washed sharp river sand of approved quality from approved quarry as per approved design including hoisting, lowering, laying and compacting to proper thickness, watering and curing for the required period, finished smooth , providing grooves or beads where necessary including cost, conveyance, royalty of all materials with labour, labour CESS , and T&P etc. required to complete the work in all respect including dewatering if required as per direction of the Engineer in charge. | | 13 | Providing ,Supplying fitting and fixing of Chequred tiles, in floors and treads on steps and landing on 25mm thick bed of cement mortar 1:1(1 cement :1 course sand screened and washed) filling the joints with cement mixing with pigment matching to the shade of tile ,curing for required days , including cost of pre cast tiles , cost , conveyance , royalty of all materials, cost of all labour , labour CESS and T&P required to complete the work in all respect as per specification and direction of Engineer in charge. | | 14 | Providing ,Supplying fitting and fixing of Ceramic tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755, 30cm.x30cm. / 40cm. X 40cm. Special plain/ printed series of approved make , in floors and treads on steps and landing on 25mm thick bed of cement mortar 1:1(1 cement :1 course sand screened and washed) filling the joints with cement mixing with pigment matching to the shade of tile ,curing for required days , including cost of pre cast tiles , cost , conveyance , royalty of all materials, cost of all labour , labour CESS and T&P required to complete the work in all respect as per specification and direction of Engineer in charge. | | 15 | Providing ,Supplying fitting and fixing of ceramic wall tiles with 20cmx30cm / 20cmx20cm special plain / printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 in Dado skirting and rises of steps on 12mm thick cement plaster 1:3 (1 cement:3 sand) jointed with neat cement mixed with pigment to match the shade of the tiles , including cost of pre cast tiles ,curing for required days , including cost of pre cast tiles , cost , conveyance , royalty of all materials, cost of all labour , labour CESS and T&P required to complete the work in all respect as per specification and direction of Engineer in charge. | | 16 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for re-use and removing the debris with in 50m lead including cost of all labour, Labour CESS and T&P. etc required to complete the work in all respect, as per direction of Engineer in charge. | | 17 | Providing and fixing of WPC door frames with rebate cuts and finished cross section size 75mm x 45mm or 90mm x 50mm, including cost of all materials, cost of all labour conveyance, taxes, loading, unloading scaffolding, slaging watering and curing, T&P, etc, complete as per the direction of the Engineer-in-charge (As per proceedings of C.C.E level committee meeting held on Dt. 12.02.2024 at 11.30 A.M.) etc completeas per the direction of the Engineer in charge. | | 18 | Supplying fitting and fixing of 32 mm thick flush door shutter with approved quality of 30 mm thick BWR block board pasted with 1 mm thick sumica on both side of approved design and quality including of all door fittings and fixtures etc. complete. Vide SOR 2022, Page-234 etc completeas per the direction of the Engineer in charge. | | 19 | Supplying fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures Vide SOR 2022 Page-235 etc completeas per the direction of the Engineer in charge. | | 20 | Supplying fitting fixing of openable UPVC Door with door frame of approved make with 6mm thick glass of approved quality complete with frame,Shutters, and all fitting and fixtures.vide SOR 2022,Pg-235 etc completeas per the direction of the Engineer in charge. | | 21 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Three Track. Three panel sliding window -60-Series duly manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x58 mm x2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards as per direction of the Engineer in charge. | | 22 | Factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) mpregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone (EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour as per specification and direction of the Engineer in charge. | | 23 | Providing fitting and fixing of Partion walling aluminium anodized section no 9210and 9207 as single groove and double groove respectively as horizontal and vertical member and section 4660 as tapered clip and jointing angle no 1885 etc. filling the panels with 12mm thick pre laminate particle board, including cost , conveyance of all materials, all Labour, Labour CESS ,T&P required to complete the work in all respect as per direction of the Engineer in charge . | | 24 | Providing fitting and fixing of false ceiling with aluminum anodized T section No.3215 with 2'-0'' center to center , L section No 1705 up to 15 microne in 4 walls to be fixed by means of steel screews and PVC plug and the aluminum grid 2'-0'' x2'-0'' with prelaminated particle board suspended from ceiling etc. including cost, conveyance of all materials, labour, Labour CESS, T&P etc required for complete the work in all respect as per direction of Engineer in Charge. | | 25 | Providing fitting and fixing of Partion walling aluminium anodized section no 9210and 9207 as single groove and double groove respectively as horizontal and vertical member and section 4660 as tapered clip for fixing up 18mm thick BWR ply with 2mm thick mica and jointing angle No-1855, including cost , conveyance of all materials, all Labour, Labour CESS ,T&P required to complete the work in all respect as per direction of the Engineer in charge . | | 26 | Providing and laying waterproof with polymeric bituminous membrane(Plastic felt) of 2.25 kg per sqm and 1.5mm thickness consisting of layers having center core of 20microns thermoplastic high molecular high density polyethylene H.M.H.D.P.E film of grade 2504 including priming the surface with bituminous primer @ 0.3 kg per sqm. providing a coat of hot blown bitumen of 1.32 kg per Sqm, applying and laying plastic felt membrane with 10 cm overlap adhered to blown bitumen of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.2 kg per sqm etc. complete including cost, carriage of all materials, labour ,Labour CESS etc, complete in all respect as per direction of the Engineer in charge. | | 27 | Supplying fitting and fixing of 0.40mm thick GCI sheet (ISI Marked) in roof with fixing of \\" L\\" & \\"j\\" hooks including cost of nuts and bolts, washers anddrilling holes & fixing wind ties and ridges etc. including cost, carriage of all materials(excluding cost of wind ties and ridges), cost of all labour, labour CESS and T&P etc. required to complete the work in all respect as per specification and direction of Engineer-in charge. | | 28 | Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (IMIDACHLOPRIED 30.5SC mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 Itr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour, conveyance, T&P, all taxes and hire charges of machinaries as per direction of Engineer in charge. | | 29 | Dismantling and removing of doors and windows and ventilators including removal of frames , hinges ,fastening and stacking the same for reuse and removing the debris with in 50m lead including cost of all labour, Labour CESS and T&P. etc required to complete the work in all respect, as per direction of Engineer in charge. | | 30 | Supplying and fitting of Roller blinds by fixing Powder coated top chanel, bottom chanel with bottom end cap, control unit and good quality of 60 mm thick fabric of approved design and quality etc. complete. SOR 2022, Page-234. | | 31 | Single Piece European water closet hindware 9205 | | 32 | Supply all matenals and labour for fitting and fixing of following size white glazed vitreous china wash hand basin of approved make in all floor of approved quality including cutting the walls & floor and making good the damages with cement concrete etc including all taxes, duties, transportation etc, all complete as per direction of EIC. | | 33 | Providing all materials, labour, T&P for laying/fixing of following dia CPVC pipes SDR-11 as per IS-15778/2007 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure. The cost inclusive of transportation scaffolding etc. excluding GST as per specification and direction of Engineer in charge. | | 34 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal jointing materials complete as per specification and direction of the Engineer in charge. cock(Jaquar)CON-CHR-049NKN | | 35 | Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge.Design mirror(Parryware) | | 36 | Supplying all materials, labour, T&P and fixing standard sized CP towel rall complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. | | 37 | Towel Ring Round (As Per Jaquar Cat no : ACN-CHR-1121BN) | | 38 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap hoider AKP-ABR-35731P(Jaquar make) | | 39 | 15mm dia CP angle stop cock (FLR-CHR-5053N Jaquar make) | | 40 | Revolving Shower with arm Jaquar Cat NO-OHS-CHR-1985+SHA-CHR-477 Please Enable Macros to View BoQ information |
|