|
| 1 | Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debris with in 50m lead including cost of all labour with T&P etc. complete. |
| 2 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.50m initial lift including rough dressing breaking clods to maximum 5cm to 7cm & laying in layers not exceeding .0.3m depth and as per direction of the Engineer-in-Charge |
| 3 | Construction of Granular Sub Base by providing Grading VI material, spreading in 8uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 |
| 4 | Cement concrete of proportion (1:3:6) in F&F using 40mm size bhg metal of approved quality including cost, conveyance, taxes & royalty of all materials and labour with T&P etc. complete in all respect |
| 5 | Cement concrete of proportion (1:2:4) in F&F using 12mm size cb/hb chips of approved quality including cost, conveyance, taxes & royalty of all materials and labour with T&P etc. complete in all respect. |
| 6 | Providing and laying 80mm thick factory made cement concrete interlocking paver block of M-40 grade of approved make size & design colour & shape made by block making machine with proper compaction laid in required pattern complete in alll respect confirming to IRC SP-63-2018. |
| 7 | Fixing of Chequred tiles in floors, Trades of steps & Landing with with cement morter(1:1) with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect |
| 8 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 9 | Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 10 | Dismentalling A.C.C/ G.C.I sheet roofing after carefully removing the nuts including stacking the materials for re-use and removing the debris with in 50m lead, including cost of all labour with T&P etc. complete. |
| 11 | Dismentalling & Removing 2.5cmthickartificial stone flooring including stacking the useful materials for re-use and removing the debris with in 50m lead including cost of all labour with T&P etc. complete. |
| 12 | R.C.C. work of proportion M-20 grade having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position etc complete as per direction of Engineer-in-Charge .plates |
| 13 | Fixing of Vetrified tiles Plain/ivory in floors, Trades of steps & Landing with with cement morter(1:4) with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect. |
| 14 | Fixing of Vetrified tile in Dado with with cement morter(1:3) with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect. |
| 15 | Providing and fixing Plain Gypsum board ceiling suspended from roof by adjustable G.I. ceiling angle with spread at a distance not more than 600mm fixed to roof by Rowl Plug and stiff cleat, Gupsum board 12.5mm thick held by G.I. perimeter channel MF 3 and intermediate channel MF 7, framing, boarding, jointing and finishing with special type of gypsum compound etc. including cost , conveyance and taxes of all materials, labour with TandP etc. complete in all respect as per the direction of the E I C. |
| 16 | Supplying fitting of two track UPVC Sliding window of approved make with 6 mm thick glass of approved quality complete with frame,shutters and all fitting fixtures. |
| 17 | Providing, fitting, fixing of Aluminium. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all fitting ,cost of all materials, taxes, labour, TandP etc. complete as per direction of Engineer in Charge. |
| 18 | Supplying fitting and fixing of precoated Crill sheet semi glass of 1000mm width and total coated thickness .50mm in roof drilling hole in wind ties including fixing of ridges and valley s wind ties etc complete including cost of steel and nail fitting ,all taxes labour and TandP etc. complete . |
| 19 | Fly Ash Brick masonary with Flyash Bricks of 23cm.x 11cm.x 8cm. size having crushing strength not less than 75 Kg/Cm2 in cement mortar (1:6) in superstructure including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, taxes & royalties of all materials, labour with T&P etc. complete in all respect. |
| 20 | Supplying MS Grills Gate windows made out of MS flat. Square bar to the required sizes and specification of approved design and directed by the Officer in charge including cost conveyance primer labour and TandP required for the work etc.complete |
| 21 | Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge. |
| 22 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge |
| 23 | Painting two (2) coats with any approved Enamel paint to new wood work and iron work including sand papering,polishing the surface smooth with cost,conveyance,taxes of all materials and labour with T&P required for the work etc.complete in all respects. |
| 24 | Providing and laying water proofs with polymetric bituninous membrance Plastic felt of 2.25 Kg sqm and 2mm thickness consisting of layers having centre core of 20 micron thermoplastic high molecular high density polythylens H.M.H.D.P.E. film of grade 2504 including priming the surface with bituminious primer 0.3 Kg Sqm. providing a coat of hot blown bitumen of 1.32 Kg Sqm applying and laying plastic felt membrance with 10cm. overlaping adhered to blown bitumen of 85 25 or 90 15 grade and covered with a layer of hot bitumen 1.2 Kg sqm etc. complete including cost of al materials and labour etc. complete as per the direction of Engineer in Charge. |
| 25 | Painting 2 (two) coats with any approved weather coat over a coat of primer with brush to out wall surface after scraping & cleaning the surface including cost of paint, with cost, conveyance and cess, taxes of all materials and labour with T&P required for the work etc. complete in as per specification and direction of Engineer-in-Charge |
| 26 | Painting two coats with plastic emulsion paint over a coat of primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge |
| 27 | Finishing plastered surfaces with Acrylic wall putty (water based) of approved make and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |