|
| 1 | M&L for PCC type E-2 (1:5:10), using 40 mm graded crushed stone aggregates as in filling & mass concrete, complete all as specified and directed. |
| 2 | M&L for Reinforced cement concrete, type B-1, (1:2:4), using 12.5 mm graded crushed stone aggregates as in in shelves/cooking platform and the like complete all as specified and directed. |
| 3 | M&L for Brick work using bricks old size bricks /fly ash bricks as specified in straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified. |
| 4 | M&L for Brick work half brick thick wall using Fly ash bricks bricks as specified in straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4), complete all as specified. |
| 5 | S & F for 300 mm long , Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, etc complete all as specified and directed. |
| 6 | S & F 300 mm long mild steel ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed |
| 7 | S & F floor door stopper of aluminium alloy body double leg 75-80 mm long with rubber stopper at bottom complete all as specified and directed |
| 8 | S&F Aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed |
| 9 | S & F mild steel chrome finish handles suitable of cabinets/cupboards 100 mm size complete all as specified and directed |
| 10 | S&F Venetian blinds for windows with 1mm thick venetian and holding rods spring and control type including all the accessories of opening of size exceeding 1.5 Sqm but not exceeding 2.50 sqm , design , colour and pattern all as approved complete all as specified and as directed . |
| 11 | S&F IN REPAIR stainless steel conduit 20 mm bore (Curtain rod), cut to size and erected in position including provision SS brackets & PVC decorative type finial (Two nos for each opening) complete all as specified and directed. |
| 12 | S&F 125 mm size, aluminium anodized handles, cast type complete all as specified and directed. |
| 13 | S&F 100mm long butt hinges mild steel medium weight cold rolled complete all as specified and directed. |
| 14 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 15 | S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 16 | S&F Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified and directed. |
| 17 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 18 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe.410W.Gde-E-250, quality A complete all as specified and directed. |
| 19 | S&F Framed work as in brackets of angle or Tee with web and flanges such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 20 | S&F Factory made steel windows with side hung shutter with glazing bars (using profile section as shown in drawing No. CE/AF/STD-170/07, CE/AF/STD-171/07 and CE/AF/STD-172/07 as applicable), each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded complete all as specified and directed. |
| 21 | S&F Factory made steel windows with side hung shutter without glazing bars (using profile section as shown in drawing No. CE/AF/STD-170/07, CE/AF/STD-171/07 and CE/AF/STD-172/07 as applicable), each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded complete all as specified and directed. |
| 22 | S & F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. |
| 23 | S & F 30 mm,2nd class hard wood factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed. |
| 24 | S & F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm , complete all as specified and directed. |
| 25 | S & F for flush shutters, solid core construction, with block board core and plywood face panels, with 0.9mm decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions on both sides, thickness 35mm , complete all as specified and directed. |
| 26 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with and including 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having Phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and directed. |
| 27 | S & F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs,100mm hinges, lock strike plates etc complete all as specified and directed. |
| 28 | S & F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs,100mm hinges, lock strike plates etc complete all as specified and directed. |
| 29 | S & F Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick wood grain finished colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening, complete all as specified and directed. |
| 30 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded wood grain printed PVC Sheet & 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mmx10mm (90 Degree)used instead of exposed portion of PVC sheet beading & PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and a gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site all as specified in SSR part-II 2020 Section-8, clause 8B.1 to 8B.2.1 and shown on drawing in page No 146 of SSR part-II 2004 complete all as specified and directed. |
| 31 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed. |
| 32 | Supply and fixing factory made uPVC white colour casement (Openable) window Area exc. 1.00 Sqm but n. exc. 2.00 Sqm made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters)(60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of' zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass complete all as specified and directed. |
| 33 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). |
| 34 | S&F Sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.mm in each pane complete all as specified and directed. |
| 35 | S&F 5.0 mm thick Figured glass, pin head type fixed in partitions with glazing clips and rubber beading etc in any size complete all as specified and directed. |
| 36 | S&F 8.0 mm thick Toughened glass as in hinged doors, Upvc windows/Doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.. |
| 37 | S&F 10 mm thick Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required , Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and 300mm stainless steel handle (2 handle on each leaf) area of one shutter not exc. 1.50 Sqm, complete all as specified and directed. |
| 38 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling existing rusted/unserviceable sheet complete all as specified and directed. |
| 39 | M&L 75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, and joints shall be sealed with joint sealing compound grade 'A' complete all as specified and directed. |
| 40 | Supply & fixing forb 20mm wide & 1mm thick PVC EDGE BENDING of PVC pasted on edges with suitable adhesive , complete all as specified and directed. |
| 41 | Supply & fixing of auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed. Make;- Hettich/Ebco/prime |
| 42 | Supply& fixing of ball bearing runners 45mm Telescopic channel (20inch) full extension load capacity 50kgs complete all as specified and directed.Make;- Hettich/Ebco/prime |
| 43 | Supply & fixing of stainless steel handles 100mm size for kitchen cabinet shutters, complete all as specified and directed.Make;- Hettich/Ebco/prime |
| 44 | Supply & fixing of chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 486*500mm with necessary fixing clips etc. Complete in all respect complete all as specified and directed.Make;- Hettich/Ebco/prime |
| 45 | Supply & fixing of chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530*500mm with necessary fixing clips etc. complete in all respect complete all as specified and directed. Make;- Hettich/Ebco/prime |
| 46 | Supply & fixing of chrome plated stainless steel wire basket (jar basket) pull out type, size 536*500mm with necessary fixing clips etc. complete in all respect complete all as specified and directed.Make;- Hettich/Ebco/prime |
| 47 | Supply & fixing of chrome plated stainless steel wire basket (Thali basket) pull out type, size 380*500 mm with necessary fixing clips etc. complete in all respect complete all as specified and directed. Make;- Hettich/Ebco/prime |
| 48 | Supply & fixing of chrome plated stainless steel wire basket pull(cutlery basket) out type, size 380*500 mm with necessary fixing clips etc. complete in all respect complete all as specified and directed.Make;- Hettich/Ebco/prime |
| 49 | Supply & fixing of chrome plated stainless steel wire basket pull (storage/plain basket) out type, size 380*500 mm with necessary s fixing clips etc. complete in all respect complete all as specified and directed.Make;- Hettich/Ebco/prime |
| 50 | Supply & fixing of chrome plated stainless steel wire basket pull (Bottle pull out) out type ,size 150 to 200 mm with necessary sliding frame structure, fixing clips etc. complete in all respect complete all as specified and directed Make;- Hettich/Ebco/prime |
| 51 | S & F in repair 18/19 mm thick High density board (moisture resistance) , flat pressed, single layer type or three layer type with BWR fixed as in wall mounted cabinets, Cupboards etc with necessary screws fittings and fixtures complete all as specified and directed. |
| 52 | S & F in repair 0.9 mm thick, Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, etc complete all as specified and directed. |
| 53 | S & F in repair 18 mm thick, No of ply 12, plywood, grade BWP, type BB with one side decorative laminate fixed with screws to timber frame work , etc complete all as specified and directed. |
| 54 | S & F in repair 12 mm thick, No of ply 7, plywood, grade BWP, type BB with one side decorative laminate fixed with screws to timber frame work, etc complete all as specified and directed. |
| 55 | M&L for Granite jet black shade, 15-18 mm thick ,as in step, jambs, cooking platform and like, machine cut, machine polished, bedded and jointed with grey cement slurry & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:4), complete all as specified and directed. |
| 56 | M&L for Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified and directed. |
| 57 | M&L for 25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished rough, as in sub floors or similar locations, complete all as specified and directed. |
| 58 | M&L for Glazed ceramic coloured tiles 450x 300x7-8 mm or 600mm x 300mm x 7-8 mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed. |
| 59 | M & L for Dark shade First quality Vitrified Ceramic tiles 9- 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exc 0.42 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in polymer based grout of matching shed to match over 15mm thick cement screed bed or bedding layer CM 1:4 etc complete all as specified and directed. |
| 60 | M & L for Dark shade First quality Vitrified Ceramic tiles 9- 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exc 0.42 Sqm , in Skirting and vertical surfaces etc. set and jointed in neat cement slurry and pointed in polymer based grout of matching shed to match including 10 mm rendering in cement mortar (1:4) etc complete all as specified and directed. |
| 61 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tile laid over and including 15 mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified and directed. |
| 62 | M&L for repairing of RCC projection chhajjas, roof bottoms, facia etc by necessary preparation. Scraping cutting, chiselling derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC with cement concrete (1:1.5:3) using 20mm graded stone aggregate and reinforcement with welded mesh of weight 2 Kg / Sqmm but n.exc 3 Kg / Sqmm (if required) with or without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n.exc 5 Sqm and thickness of RCC member n. exc 70mm including necessary formwork and complete all as specified and directed.Note;- (The rate quoted by the contractor shall included for welded mesh, scaffolding and necessary formwork upto triple storey building). |
| 63 | M&L for Rendering 5 mm thick on fair faces of concrete surfaces, finished fair and even on ceiling surfaces in cement mortar (1:3), complete all as specified and directed. |
| 64 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6) complete all as specified and directed. |
| 65 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4) with water proofing compound as manufacturers instruction complete all as specified and directed. Note:- WPC shall be measured and paid separately. |
| 66 | Supply only water proofing compound, ISI marked, complete all as specified and directed. |
| 67 | M&L for Preparation of old plastered/unplastered surfaces of concrete ceilings by removing complete existing treatment from ceiling surfaces and applying two coats of oil emulsion distemper (white or tinted) complete all as specified and directed. |
| 68 | M&L for Three coats of white washing on newly plastered ceiling surfaces, including preparation of new surfaces, complete all as specified and directed. |
| 69 | M&L for Preparation of old plastered or un-plastered surface of wall and applying two coats of interior acrylic distemper/oil bound distemper complete all as specified and directed. |
| 70 | M&L for complete removal of existing treatment of any description, including preparation of wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed).(b) Two coats of interior acrylic emulsion over and including a coat of acrylic emulsion primer. |
| 71 | M&L for Preparation of new plastered wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of interior acrylic emulsion over and including a coat of acrylic emulsion primer. |
| 72 | M&L for complete removal of existing treatment of any description, including preparation of wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer. |
| 73 | M&L for preparation of newly plastered wall surfaces of any description and applying the two coats of exterior acrylic emulsion over and including a coat of acrylic emulsion primer complete all as specified. |
| 74 | M&L for preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed . |
| 75 | M&L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and directed. |
| 76 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and directed |
| 77 | M&L for preparation Two coats of synthetic enamel paint over & including a coat of red oxide primer over steel & iron (new) surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed |
| 78 | S&F in repair 15mm bore Steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 79 | S&F in repair 20mm bore Steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 80 | M&L for disconnecting existing tanks of capacity exceeding 250 litre but not exceeding 500 litre, setting aside (or lowering if required) for cleaning/roof repair etc. and hoisting, reconnecting and re-fixing in position after necessary cleaning by removing all scale and dirt etc. including cleaning mouth of circulating service pipes complete all as specified and directed. |
| 81 | S&F 500 litre capacity, three layered polyethylene water storage tanks (cylindrical vertical with closed top) including hoisted and fixed in position, making connections, IN-REPAIR, complete all as specified including the following accessories: -(i) PTMT ball valves, high pressure, with epoxy coated aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, IN REPAIR, complete all as specified.(iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIR, complete all as specified.(iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP. |
| 82 | S&F 1000 litre capacity, three layered polyethylene water storage tanks (cylindrical vertical with closed top) including hoisted and fixed in position, making connections, IN-REPAIR, complete all as specified including the following accessories: -(i) PTMT ball valves, high pressure, with epoxy coated aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, IN REPAIR, complete all as specified.(iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIR, complete all as specified.(iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP. |
| 83 | S&F concealed stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete all as specified and directed. |
| 84 | S&F Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete all as specified and directed. |
| 85 | S&F Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete all as specified and directed. |
| 86 | S&F in repair sink mixer with regular spout with hot or cold mounted tap of 15mm bore dia, cast copper alloy, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts fancy type screwed for iron pipe, complete all as specified and directed. |
| 87 | S&F CP Wall mixer for mixing hot & cold water screwed down for iron pipe and fixed , screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete all as specified and directed. |
| 88 | S&F CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed , screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete all as specified and directed. |
| 89 | S&F 125 mm size overhead ABS shower with cast copper alloy chromium plated arm 225 mm long with flange and fixed in position, IN REPAIR, complete all as specified and directed. |
| 90 | S&F Corner glass shelf, 5mm thick glass, 9\\" wide, fixed with suitable mild steel CP brackets, nuts & bolts, fixed in repairs, complete all as specified and directed. |
| 91 | S&F in repair Stainless steel sink with double Bowl and single drainage board with glossy finish made out of 1.00mm thick sheet for kitchen or laboratory with plug , waste pipe , waste coupling , washers , brackets, connecting union etc overall size 1170mm x510 mm with size of Each Bowl 400mm x 340mm complete all as specified and directed |
| 92 | S&F in repair single piece ceramic china EWC (Pedestal pattern) with soft close seat cover , hinges, fixing accessories , accessories set and flushing cistern of size 360 x 640 x 685 complete all as specified and directed |
| 93 | S&F in repair Vitreous china EWC (Pedestal pattern) type white complete including plastic WC seat cover white closed pattern with flat bottom and MS chromium plated hinging device complete all as specified. |
| 94 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe etc. complete including making good to floor, complete all as specified and directed |
| 95 | S&F in repairs PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and including ball valve float & handle, flush pipe, waste pipe & brackets complete all as specified and directed |
| 96 | S&F in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm including fixing accessories like galvanised brackets with PTMT waste coupling half or full threaded suitable for & including 32 mm size PVC discharge pipe complete all as specified and directed |
| 97 | S&F in repair PVC connections 15 mm size of length 450 mm with PTMT nuts, complete all as specified and directed |
| 98 | S&F in repair 75mm dia uPVC / PVC floor trap with grating including jointing with solvent and embedding in cement concrete type B-1 (1:2:4) complete all as specified and directed |
| 99 | S&F in repair 75mm external dia uPVC pipes, type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed under floors / fixed to wall as SWR pipes complete all as specified and directed. |
| 100 | S&F in repair 110mm external dia uPVC pipes, type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed under floors / fixed to wall as SWR pipes complete all as specified and directed. |
| 101 | S&F in repair 75mm external dia uPVC/PVC bends any radius suitable for uPVC soil waste discharge pipes complete all as specified and directed |
| 102 | S&F in repair 110mm external dia uPVC/PVC bends any radius suitable for uPVC soil waste discharge pipes complete all as specified and directed |
| 103 | S&F in repair 75mm external dia uPVC/PVC Junction single T equal or unequal any radius suitable for uPVC soil waste discharge pipes complete all as specified and directed |
| 104 | S&F in repair 110mm external dia uPVC/PVC Junction single T equal or unequal any radius suitable for uPVC soil waste discharge pipes complete all as specified and directed |
| 105 | Taking down cement plaster of any description on brick walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 106 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50sqm each and removing from site complete all as specified and directed. |
| 107 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50sqm but n. exc. 4 Sqm each and removing from site complete all as specified and directed. |
| 108 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and re-fixing in the same opening after easing adjusting and minor repair complete all as specified and directed. |
| 109 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each complete all as specified and directed. |
| 110 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 111 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 112 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 113 | Demolition brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 114 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 115 | Demolition of cement concrete (unreinforced) in ground floors n. exc. 0.15 m thickness complete all as specified and directed. |
| 116 | Dismantling wrought iron or mild steel work of any description in any position complete all as specified and directed. |
| 117 | Demolition of stone slabs , kota stone/Granite slab of any description or thickness in floor etc complete all as specified and directed. |
| 118 | Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline. Please Enable Macros to View BoQ information |