|
Tender For Supply Of Consumable Items For Idea Lab Of Dr. B. R. Ambedkar Institute Of Technology (Dbrait), Sri Vijaya Puram , Supply Of Consumable Items , Ldr Sensor Module (Compatible With Arduino Board) , Ir Sensor Module (Compatible With Arduino Board) , Color Led (Compatible With Arduino Board) , Ultrasonic Sensor Module (Compatible With Arduino Board) , Gas/Smoke Sensor Module (Compatible With Arduino Board) , Vibration Sensor Module (Compatible With Arduino Board) , Buzzer (Working Voltage: 3.5-5.5V, Working Current: 25Ma, Pcb Dimension: 1.85 X 1.5 Cm (L X W) , Humidity & Temperature Sensor (Dht11) (Compatible With Arduino Board) , Motion Detector Sensor Pir (Compatible With Arduino Board) , Relay Sensor Module (Number Of Relays: 4, Compatible With Arduino Board) , Soil Moisture Sensor Module (Compatible With Arduino Board) , Fire Sensor Module (Compatible With Arduino Board) , Piezo Speaker (Operating Voltage: 3.3V-5.0V, Operating Frequency: 2.048Khz, Sound Output: 85Db, Dimensions: 20Mm X 15Mm X 7Mm) , Seven Segment Board (Display Type: Common Cathode (Cc)/Common Anode (Ca), Forward Voltage: 1.6V To 3.3V, Operating Current: 10Ma) , Lcd (Display Capacity: Typically 16 Characters By 2 Lines (16X2), Compatible With Arduino Board) , Potentiometer (Supply Voltage: 3V-5V, Total Resistance: 10Kω (200 Ohms)) , Esp32 With Usb Cable (Dual-Core Xtensa Lx6 Processor (Up To 240 Mhz), Sram:520 Kb Of Sram Rom: 448 Kb Wi-Fi: Supports 802.11 B/G/N Std In The 2.4 Ghz Band. Bluetooth: Bluetooth V4.2 Br/Edr And Bluetooth Low Energy (Ble) Usb Cable) , Raspberry Pi 4 (Processor: Broadcom Bcm2711, Quad-Core Cortex-A72 (Arm V8) 64-Bit Soc @ 1.8Ghz Memory: 1Gb/2Gb/4Gb Lpddr4-3200 Sdram Wireless: 2.4 Ghz And 5.0 Ghz Ieee 802.11Ac Bluetooth: Bluetooth 5.0, Ble Ethernet: Gigabit Ethernet Usb Ports: 2 × Usb 3.0 Ports, 2 × Usb 2.0 Ports Display Output: 2 × Micro-Hdmi® Ports (Supports Up To 4Kp60) Camera Port: 2-Lane Mipi Csi Port Storage: Micro-Sd Card Slot Power: 5V Dc Via Usb-C Connector (3A Minimum) Or Gpio Header Gpio: Standard 40-Pin Gpio Header) , Dc Adapter (2-Flat-Pin Plug 220V Input Voltage / 5V Dc 1A Output Voltage) , Mini Water Pump (Compatible With Arduino Board) , I2C Adaptor (Compatible With Arduino Board) , Bluetooth (Compatible With Arduino Board) , Arduino Nano (Ic: Microchip Atmega328P (8-Bit Avr Core) Clock Speed: 16 Mhz (On Nano Board) Flash Memory: 32 Kb Sram: 2 Kb) , Arduino Uno With Usb Cable (Board Type: Arduino Uno (Or Compatible) Microcontroller: Atmega328P Usb Port: Usb-B (Standard For Official Boards) Cable Type: Usb 2.0 Type-A To Type-B) , Arduino Jumper Wire (Configurations: Male-To-Male (M-M)) , Arduino Jumper Wire (Configurations: Male-To-Female (M-F)) , Arduino Jumper Wire (Configurations: Female-To-Female (F-F)) , Gigabit Ethernet Switch (Managed Switch,16 Gigabit Ethernet Rj45 Ports,4 Sfp Slots,2 Gigabit Ethernet Combo, Ethernet Port Configuration: 24-Port 10/100/1000, 4 X 1G Uplinks (Sfp),Control: Easy-To-Use On-Box Webui, Cli, Snmp, Pnp, Auto Smartports, Auto-Discovery, Zero-Touch Deployment,Advanced Security: 802.1X Including Dva, Web-Based Authentication, Mab, Private Vlan, Ipv6 First Hop Security, Ip Source Guard, Sct (Copp), Storm Control,Protocol Support :Static Routing,Ripv2,Bgp,Ospfv3,Pbr,Ripv1,Ospfv2,Ripng.--25K)
|