|
| 1 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR 13.88) |
| 2 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 12.5 in super structure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand).(DSR 2023 I.N. 6.3.1) |
| 3 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. : Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 2023 Item No-6.13.2) |
| 4 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR 2023, 10.25.2) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 2023 Item No 5.3) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform (DSR 2023 Item No- 5.9.3) |
| 7 | S/F Steel reinforcement for R.C.C. work ready to use “cut and bend” rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR 2023 Item No- 5.22C.1) |
| 8 | 12 mm thick cement plaster of mix : 1:4 (1 cement: 4 coarse sand) (DSR 2023 Item No-13.4.1) |
| 9 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.(DSR 2023 I.No-11.38) |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1 :4(1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.( Size of tiles 60x60 cm.) (DSR2023 I.N.11.41.2) |
| 11 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 40 mm thick with 20 mm nominal size stone aggregate, finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (DSR 2023 Item No-11.3.1) |
| 12 | Providing and glass strips ,joints of floor skirting dado at time of laying floors flush with floor lavel including supply of all matareial labour and T&P etc. required for proper completion of work, 5.5mm. Thick and 2.2 cm. Depth (S.I.No 631 c) |
| 13 | 4cm (1 thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm.(3/4\\")graded approved stone shingle laid in panels finished with 3 mm.(1/8\\") floating coat of neat cement or cement and marble dust in 5:1 as specified over including Murga Jali, water proofing in the removing any over lapping mortar at the joints of Panels if any and giving them a uniform finish including supply of all materials, labour' and T&P etc. requierd for proper completion of the work including Murga Jali (A.R) |
| 14 | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : 12 mm thick plain grade -1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT- I, IS : 3087 marked, bonded with BWP type synthetic resin adhesive as per IS : 848 :(DSR I.N. 9.6.1) |
| 15 | Glazed shutters: Second class teak wood including lSI marked anodised aluminium butt hinge with necessary screws.(DSR2023 I.N. 9.16.2.1) |
| 16 | Supply & fixing 5.5mm thick glass panes of approved quality with beeding & putty for window & ventilator mann section or behaviour is required on other place including cartage of all items etc. (DSR 2019, Item code 10.30.2)x0.8595 |
| 17 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 2nd class teak wood beading 62X19 mm (DRS 2023 Item No 9.51.1) |
| 18 | Providing and applying white cement based putty of average thickness 1 mm thick of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (DSR 2023, I No.13.80) |
| 19 | Finising walls with acrylics smooth exterior paint of required shade Old work two more coat applied @1.67 lir./10Sqm over on existing cement paint applied (DSR 2023.-13.111.1) |
| 20 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : Old work (two coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre(DSR 2023.I.No. 13.81.1). |
| 21 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works (DSR 2023, 13.50.3) |
| 22 | Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood (DSR 2023, 13.50.2) |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (DSR 2023 Item No-13.99.1) |
| 24 | Providing and fixing G.I pipes complete with G.I. Fittings and clamps including cutting and making good the walls etc. internal work Exposed on wall : 15mm dia. Nominal bore (D.S.R. 2023 I. No.18.10.1) |
| 25 | Providing and fixing G.I pipes complete with G.I. Fittings and clamps including cutting and making good the walls etc. internal work Exposed on wall : '20mm dia Nominal bore (D.S.R. 2023 No.18.10.2) . |
| 26 | Providing and fixing brass bib cock of approved Qty nominal bore, 15mm dia. Nominal bore (D.S.R. 2023 No.18.15.1) |
| 27 | providing and fixing brass stop cock of approved Qty 15mm dia. Nominal bore ( D.S.R.2023 No.18.16.1) |
| 28 | Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall, 15mm dia. Nominal bore ( DSR 2023.I.No-18.11.1) |
| 29 | Providing and fixing ball valve (brass) of approved quality complete:High or low pressure with plastic floats: 15 mm nominal bore (DSR 2023.I.No-18.18.1.1) |
| 30 | Providing and placing on terrace (at all floorlevels ) polyethylene water storage tank ISI: 12701 marked with cover and suitable lockinjg arrangement and makinjg necessaryholes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR.I.No.- 18.48) |
| 31 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 630x450mm (DSR 2023.I.No-17.25.1) |
| 32 | Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the of 1 :1 (1 cement: 1 fine sand) including testing of joints etc. complete:100 mm dia. Nominal bore (D.S.R. No.19.1.1) |
| 33 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or Strap, 10 litre low level white P. V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. (DSR 2023.I. No 17.1.1) |
| 34 | Supply & fixing of PVC pipe 6 kg/sq. cm. pressure10 cm dia (Kisan, Supreme or equivalent) make complete with bends with door at top and plain at bottom and gratingand including supply of necessary M.S. clamps 2.5 cm x 3 mm fixed to walls with and including supply of 15cm long 6mm dia. nails all materials, labours and T&P etc. required for proper completion of the work and including repair of plaster pointing etc. if damaged during fixing of the pipe.(S.I.No.730B) |
| 35 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (DSR 2023 I.N. 17.3.1) |
| 36 | Providing and fixing lSI marked oxidised M.S.sliding door bolts with nuts & screws etc. complete ( DSR No- 9.62) 250x16 mm ( DSR 2023 No-9.62.2) |
| 37 | Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 250x10 mm ( DSR2023 No- 9.63.1) |
| 38 | Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 200x10 mm( DSR 2023 No-9.63.2) |
| 39 | Providing and fixing lSI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete: 125mm ( DSR 2023 No- 9.66.1) |
| 40 | Providing and fixing lSI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete: 100mm ( DSR 2023 No- 9.66.2) Please Enable Macros to View BoQ information |