|
| 1 | First class brick work in 1:6 cement and coarse sand mortarbut in super-structure, including necessary cutting and moudling of bricks as required and including honey comb brick work, thickness of wall not to be less than 1 ½ brick thick including supply of all materials, labour and T&P etc. required for proper completion of the work. (SI.No. 303+309+310) |
| 2 | First class work in 1:4 cement and coarse sand mortar but for wall of half brick (4½'')thick. including necessary cutting and moudling of bricks as required and including honey comb brick work, thickness of wall not to be less than 1 ½ brick thick including supply of all materials, labour and T&P etc. required for proper completion of the work. (SI.No. 305+309+310a) |
| 3 | 12 mm thick plaster with 1:5 cement and coarse sand Mortar in 1:4 minimum thickness not to be less than 3/8\\" (10 mm) thick including supply of all materials, labour and T&P etc. required for proper completion of the work. (SI. No. 584(i) |
| 4 | Supply & fixing 6 mm (1/4\\") China white glazed in flooring or skirting dado laid with 1:3 cement and approved coarse sand mortar finished white cement slurry jointing and polishing complete including supply of all materials, labour and T&P etc. required fo proper completion of the work. (SI. No. 628) |
| 5 | 4cm (1 thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm.(3/4\\")graded approved stone shingle laid in panels finished with 3 mm.(1/8\\") floating coat of neat cement or cement and marble dust in 5:1 as specified over including Murga Jali, water proofing in the removing any over lapping mortar at the joints of Panels if any and giving them a uniform finish including supply of all materials, labour' and T&P etc. requierd for proper completion of the work including Murga Jali (A.R) |
| 6 | Supply and fixing of 32 mm thick flush Doors commercial quality conforming to I.S. 2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. (Ch. 9 SI. No. 470i) |
| 7 | Providing and applying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth complete (DSR 2023, I No.13.26) |
| 8 | Distemper one coat with oil bound distemper of approved brand manufacture and required shade on decorated wall surfaces to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as of british, shalimar, asian paints after throughly brushing surface free from mortar droppings and other foreign matter and also including preparing the surface even also sand prepared smooth including cost of all materials. (SI. No. 649) |
| 9 | Finising walls with acrylics smooth exterior paint of required shade New work two more coat applied @1.67 lir./10Sqm over and including base coat of water proofing cement paint applied @2.2kg/10Sqm (DSR 2023.-13.46.1) |
| 10 | Apply priming coat over new wood work and on plastered surface after and including preparing the surface throughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes ,fine steel /wood scrappers sand papering and knotting including cost of all materials, labour abd T&P etc required for proper completion of the work. (Ch. 15 NSI 1b) |
| 11 | Painting first coat over priming coat (but excluding cost of priming coat) on wood or steel and other metal surface with superior synthetic enamel standard make brushing to give an even shade and finish and includjng cleaning the surface of all dirt dust and other foreign matter sand papering and stripping including cost of all materials ,labour ,T&P etc required for the proper completion of the work. on previously painted old surface with paint of Medium quality (Ch. 15 SI. No. 2+4(ii) |
| 12 | Providing and fixing G.I pipes complete with G.I. Fittings and clamps including cutting and making good the walls etc. internal work Exposed on wall : 15mm dia. Nominal bore (D.S.R. 2023 I. No.18.10.1) |
| 13 | Providing and fixing G.I pipes complete with G.I. Fittings and clamps including cutting and making good the walls etc. internal work Exposed on wall : 20mm dia Nominal bore (D.S.R. 2023 No.18.10.2) . |
| 14 | Providing and fixing brass bib cock of approved Qty nominal bore, 15mm dia. Nominal bore (D.S.R. 2023 No.18.15.1) |
| 15 | providing and fixing brass stop cock of approved Qty 15mm dia. Nominal bore ( D.S.R.2023 No.18.16.1) |
| 16 | Providing and placing on terrace (at all floorlevels ) polyethylene water storage tank ISI: 12701 marked with cover and suitable lockinjg arrangement and makinjg necessaryholes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Ch. 22 SI. No-18.48) |
| 17 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 630x450mm (DSR 2023.I.No-17.25.1) |
| 18 | Providing and fixing lSI marked oxidised M.S.sliding door bolts with nuts & screws etc. complete ( DSR No- 9.62) 250x16 mm ( DSR 2023 No-9.62.2) |
| 19 | Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 250x10 mm ( DSR2023 No- 9.63.1) |
| 20 | Providing and fixing lSI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete: 125mm ( DSR 2023 No- 9.66.1) Please Enable Macros to View BoQ information |