|
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRTH Specification Clause 201. By Mechanical MeansIn area of non-thorny jungle |
| 2 | Non Patchable Road Bamanwas to Koyla |
| 3 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 4 | Non Patchable Road NH 1B to Bhotai |
| 5 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 6 | Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per MoRTH Specification Clause 202 By Mechanical Means Bituminous Courses & Granular Courses |
| 7 | Non Patchable Road Bamanwas to Koyla |
| 8 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 9 | Non Patchable Road NH 1B to Bhotai |
| 10 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 11 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300-2 with lead upto 50 m as per MoRTH Specification Clause 305.3 |
| 12 | Non Patchable Road Bamanwas to Koyla |
| 13 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 14 | Non Patchable Road NH 1B to Bhotai |
| 15 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 16 | Granular Sub-base with Well Graded Material (Table 400-1), By Mix in Place Method, Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. |
| 17 | Non Patchable Road Bamanwas to Koyla |
| 18 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 19 | Non Patchable Road NH 1B to Bhotai |
| 20 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 21 | Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400-12 & 400-13 and MoRTH Specification Clause 406.By Mechanical Means with all lead (only 1 KM) |
| 22 | Non Patchable Road Bamanwas to Koyla |
| 23 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 24 | Non Patchable Road NH 1B to Bhotai |
| 25 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 26 | Extra rate for carriage of mixed material additional lead from in item 4.6 for 2nd KM 10th KM |
| 27 | Non Patchable Road NH 1B to Bhotai |
| 28 | Non Patchable Road Bamanwas to Koyla |
| 29 | Extra rate for carriage of mixed material additional lead from in item 4.6 for 2nd KM 10th KM |
| 30 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 31 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 32 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base(WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 |
| 33 | Non Patchable Road Bamanwas to Koyla |
| 34 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 35 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 36 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 37 | Non Patchable Road Bamanwas to Koyla |
| 38 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 39 | Non Patchable Road NH 1B to Bhotai |
| 40 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 41 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per MoRTH Specification Clause 504. Bitumen (VG-30) |
| 42 | Non Patchable Road Bamanwas to Koyla |
| 43 | Non Patchable Road NH 1B to Bhotai |
| 44 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. Case - II By Mechanical MeansBitumen (VG-30) |
| 45 | Non Patchable Road Bamanwas to Koyla |
| 46 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 47 | Non Patchable Road NH 1B to Bhotai |
| 48 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 49 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511By Mechanical MeansCase - II : Type BBitumen (VG-30) |
| 50 | Non Patchable Road Bamanwas to Koyla |
| 51 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 52 | Non Patchable Road NH 1B to Bhotai |
| 53 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 54 | Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately |
| 55 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 56 | Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 602.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a concrete mixer of not less than 0.5 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed Side Formwork (steel channel, laying and fixing of 150 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using water finishing to lines and grade as per drawing and MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments (Dowel Bars will be paid seprately) |
| 57 | Non Patchable Road Bamanwas to Koyla |
| 58 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 59 | Providing and Fixing of Dowel Bars of Mild Steel confirming to IS : 432 of specified length and diameters as per MoRTH Specification IRC 15 & 58 including cutting, placing in position across transverse joint with proper spacing, providing with PVC sleeve complete as per drawing, technical specification and as per direction of the Engineer-in-charge. |
| 60 | Non Patchable Road Bamanwas to Koyla |
| 61 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 62 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in double row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per Clause 2905.300 mm dia |
| 63 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 64 | Non Patchable Road NH 1B to Bhotai |
| 65 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 66 | Non Patchable Road Bamanwas to Koyla |
| 67 | Providing and fixing Mukhya Mantri Sadak Yojana/ Mahatma Gandhi Rajya Sadak Yojana informatory sign board with logo for roads funded by State road fund having M.S. Definition plate of 1.60 mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast including paint logo as per approved design and colours. The logo shall be made out of 1.6mm thick circular plate duly framed with MS angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 cement concrete block 45 cm x 45 cm x 60 cm, 60 cm below ground level including lettering / writing and painting etc. complete in all respect.as per MoRTH Specification Clause 801. |
| 68 | Non Patchable Road Bamanwas to Koyla |
| 69 | Non Patchable Road NH 1B to Bhotai |
| 70 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 71 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 72 | Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160\\" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. |
| 73 | Non Patchable Road Bamanwas to Koyla |
| 74 | Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MoRTH Specification Clause 801 |
| 75 | Ordinary km stone for NH |
| 76 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 77 | Non Patchable Road NH 1B to Bhotai |
| 78 | Non Patchable Road Bamanwas to Koyla |
| 79 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 80 | 200 m stone |
| 81 | Non Patchable Road NH 1B to Bhotai |
| 82 | Non Patchable Road Bamanwas to Koyla |
| 83 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 84 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 85 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRTH Specification Clause 801 |
| 86 | 90 cm equilateral triangle |
| 87 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 88 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 89 | Non Patchable Road Bamanwas to Koyla |
| 90 | 80 mm x 60 mm rectangular |
| 91 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 92 | Non Patchable Road Ramdev Mandir to Bairwa Basti Maraundh |
| 93 | Non Patchable Road Bamanwas to Koyla |
| 94 | 60 cm circular |
| 95 | Non Patchable Road Bamanwas to Koyla |
| 96 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1. fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRTH Specification Clause 801. Direction and Place Identification signs upto 0.9 sqm size board |
| 97 | Non Patchable Road Morasagar Lalsot Road to Chaturbhuj Mandir |
| 98 | Non Patchable Road Bamanwas to Koyla Please Enable Macros to View BoQ information |