|
| 1 | Taking down complete existing treatment of roof/ parapet , Mud puska on roof /parrapet including plastering, brick tiles, stone slabs and leeping any thickness including removal etc complete all as specified & directed . |
| 2 | M&L Brushing neat cement slurry (3 Kg of cement per Sq M) mixed with water proofing liquid in the proportion,water proofing liquid, water & cement (1:4:7) or as per manufacture instructions for bonding of old concrete surface to new concrete complete all as specified & directed . |
| 3 | M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) mixed with integral waterproofing chemical compound mixed in proportion 200 millilitre per 50 Kg cement as in padding, benching,Sunken portion etc on roof surface for corecting/making proper slope on roof, etc complete all as specified & directed . |
| 4 | M&L cutting 75 mm wide and 65 mm deep in brick wall / PCC block / RCC surface any location shaping horizontal face grooves filled with PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate with and including water proofing chemical compound mixed in proportion 200 millilitre per 50 Kg cement or as per manufacturers instructions laid when concrete is still green complete all as specified and as directed. |
| 5 | M&L Rendering 10 mm thick in cement mortar 1:4 on concrete / brick surfaces with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smooth without using extra cement over roof / sunken slab /wall complete all as specified and directed.NOTE : water proofing liquid will be measured and paid seperately . |
| 6 | M&L for Water proofing treatment on \\" approachable / accessible roof\\" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete.(i) Applying approved bituminous based primer conforming to IS : 3384-1995 @ 0.3kg/Sqm to be applied on top surface of prepared surface till the surface is properly impregnated.(ii) Laying APP (Atactic polypropylene Polymer Modified preffabricated membrane) waterr proofing membrane of weight not less than 3 kg/sqm with minimum 100mm side overlap along the length from downward to upward completely sealed with torch application/hot blown lamps. (iii) Applying two coats of bituminiuous based bitumen primer @ 0.3 kg/sqm and spreading corse sand on primer to obtained rought surface which facililate make a bond between membrane and screed bed complete all as specified and directed. |
| 7 | M&L for 300mm x 300mmx 7-9mm thick size roof cool tile to reduce room temperature, slip resistance , ocian blue in colour laid on cement mortar 1:6 and pointing in CM 1:3 over 15mm thick screed bed complete all as specified and directed. |
| 8 | Supply only water proofing compound (liquid),ISI marked complete all as specified and directed. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 10 | M&L for joint free non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified & directed . |
| 11 | M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed. |
| 12 | M&L coloured ceramic glazed tiles 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement complete all as specified and directed. |
| 13 | M&L machine cut kota stone slab flooring 18-20 mm thick over & including 20mm screed base in CM (1:6) and backing coat of cement slurry as in step tread in one piece in one step laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 14 | All as per above Item but as in Skirting with 10mm thick rendering in CM (1:4)....ditto as above…. complete all as specified & directed . |
| 15 | M&L rounding of edges of kota/cudappa stone slabs one edge , such as in steps, cooking plateform, and other similar situation complete all as specified and directed. |
| 16 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. Exc 1.5 Sqm each complete all as specified and directed. |
| 17 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) exc1.5 Sqm but n.exc. 4 Sqm. each complete all as specified and directed. |
| 18 | S & F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing complete all as specified & directed . |
| 19 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame as spd complete all as specified & directed . |
| 20 | S&F factory made pressed steel frames 125x60mm for doors or for windows with one or more rebated incl, necessary fixing lugs hinges lock strike plate etc complete all as specified and directed |
| 21 | S&F factory made pressed steel frames 105x60mm for doors or for windows with one or more rebated incl, necessary fixing lugs hinges lock strike plate etc complete all as specified and directed |
| 22 | M&L 35 mm thick Plain framed, factory made paneled shutter with lock rail and panel of 12mm plywood commercial on both faces. The size of rail and style as per IS: 1003(Part - 1), complete as directed. |
| 23 | S & F factory made 35mm thick 2nd class hardwood glazed and skeleton shutters divided into squares with plain, chamfered or rounded, mitred & rebated sash bars and prepared to receive glass, gauze etc edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for doors, etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (a). complete all as specified & directed . |
| 24 | S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified |
| 25 | S&F anodised aluminium window , ventilator shutters, Partition fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified |
| 26 | S&F in repair framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0 complete all as specified & directed . |
| 27 | M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast, frames, etc complete all as specified & directed . |
| 28 | S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed . |
| 29 | S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified & directed . |
| 30 | S & F Aluminium anodised handles of extruded section and fixed 125 mm long complete all as specified & directed . |
| 31 | S & F 250 mm long mild steel sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified & directed . |
| 32 | S&F stailness steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks etc complete all as spd. |
| 33 | S&F in repair stailness steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks etc complete all as spd. |
| 34 | S& F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each panecomplete all as specified & directed . |
| 35 | S&F 4.00 mm thick plain Sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete all as specified & directed . |
| 36 | S & F 4 mm thick frosted glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane etc complete all as spd and directed. |
| 37 | S&F MS ordinary rat tail rod pattern springs 200mm, including roller and roller plate complete all as specified & directed .. |
| 38 | S&F in repair 18mm thick HDHMR (High Density high moisture resistance )board of grade 1 quality Make:Green ply ,Action Tesa or other make as approved by GE of one side prelam and other side to suitable for high gloss finish mica of approved quality make :Century or as approved by GE fixed with screws ,solvent cement /adhesive to make cub board shutter ,sides,tops,bottom shelves inside the cabinet shutter or drawer including piano hinges and magnetic catcher ,knobs ,hasp and staple complete all as specified and directed . |
| 39 | M/L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer complete all as specified & directed . |
| 40 | M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified & directed .. |
| 41 | S & F in repair Harrison rails,20 mm dia of anodised aluminium alloy with bracket etccomplete all as specified & directed . |
| 42 | Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete all as specified & directed . |
| 43 | Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as specified & directed . |
| 44 | M&L brick work with sub class 'B' brick straight or curved on plan exc 6 metres radius with old size bricks built in cement mortar (1:4) complete all as specified & directed . |
| 45 | M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement complete all as specified & directed . |
| 46 | M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using WPC (WPC shall be measured seperetly)on wall finishing the surfaces even and smooth without using extra cement complete all as specified & directed . |
| 47 | M&L for 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed. |
| 48 | M&L for preparation of new plastered surface of ceiling and applying three coats of white wash all as specified. |
| 49 | M&L for Preparation of old plastered or unplastered surfaces of ceiling and applying two coat of white wash to ceiling complete all as specified and directed |
| 50 | M&L for preparation of new plasterd surfaces & applying 1mm thick of \\"Birla White wall care putty\\"or\\" JK Wall Care Putty and applying white cement primer and applying two coats of oil bound distemper of any shade on wall surfaces complete all as specified and directed |
| 51 | Material and labour for complete removal of existing treatment of old surfaces of walls including washing, rubbing down and stopping of distempered surface and applying two coat of distemper oil emulsion and 1mm thick wall care putty on old decorated surface of wall complete all as specified and directe. |
| 52 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed |
| 53 | M&L for preparing the old plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed |
| 54 | Demoliton of cement concrete in ground floor paving n exc 15cm thickness ( below or above ground level ) complete all as specified and directed |
| 55 | M&L 100mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in hard standing ,finished even and smooth without using extra cement including spike rolling to surface complete all as specified and directed |
| 56 | M & L for 75 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3. complete all as specified and directed |
| 57 | M&L Cement concrete 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete all as specified and directed. |
| 58 | M&L 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified. |
| 59 | M&L for antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 60 | Demolition of cement concrete reinforced as in chullah hoods , shelves, cover slab ,rcc tank and plate form etc complete all as specified and directed |
| 61 | M&L for RCC as in kitchen platform, shelves, cover slab type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified |
| 62 | S&F mild steel deformed bars 8 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc complete all as specified and directed |
| 63 | M&L Granite (of any type) work (table rubbed and polished) of any shade 18 to 20mm thick in cooking platform, steps, windowcills, etc over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab incl rounding of slab & demolition of old slab where directed complete all as specified and directed. |
| 64 | S&F in repair Steel plate rack of size 750x600x250mm made out of 0.63mm thick steel sheet complete all as specified and as directed. |
| 65 | S&F in repair 1000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete all as specified and directed |
| 66 | S&F PVC ball valve 25mm dia with epoxy coateed aluminium rod and high density ball (minium weight 210 gms) complete as directed . |
| 67 | Taking up or down steel tubing & connections including cleaning for refixing bore of pipe 15mm etc complete all as specified and directed |
| 68 | Taking up or down steel tubing & connections including cleaning for refixing bore of pipe 20 mm etc complete all as specified and directed |
| 69 | S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore etc complete all as specified and directed |
| 70 | S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm bore etc complete all as specified and directed |
| 71 | Refixing old galvanised steel tubes & connections on wall 15 mm bore complete all as specified and directed . |
| 72 | Refixing old galvanised steel tubes & connections on wall 20 mm bore complete all as specified and directed . |
| 73 | S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed . |
| 74 | S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed . |
| 75 | Supply and fix in repair 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed |
| 76 | Supply and fix in repair angle cock of 15mm bore, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed. |
| 77 | S&F in repairs15mm dia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered \\"Hot or Cold\\" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed |
| 78 | S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as directed and spd. |
| 79 | S&F in repairs looking mirror of size 600 X 450mm selected quality 5mm thick glass mounted on 6mm ply wood & fixed with brass screw & cup washer complete all as specified and directed |
| 80 | Material and labour in repair for vitrous china wash down water closet, pedestal pattern Pedestal pan and P or S trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.and incl seat and cover for pedestal pan as in repairs complete all as specified and directed. |
| 81 | S&F in repair PVC connection 450mm long with two PTMT nuts complete all as specified and directed |
| 82 | S&F CP towel rail, 20mm dia, D type,60cm long complete all as approved and directed by the EIC complete all as specified and directed |
| 83 | S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete all as specified and directed. |
| 84 | S&F in repair Vitreous china wash hand basin white flat back size 550 x 400mm, including 32mm CP brass waste fitting, 32mm PVC waste pipe, cast iron brackets and PCC 1:2:4 type B-I using graded stone aggregate for embedding brackets and making good disturbed surfaces in CM 1:3 complete all as specified and directed. |
| 85 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 86 | S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed |
| 87 | Material and labour for one coat of synthetic enamal paint to wooden surface exceeding 10cm widht or girth including preparation of old painted wooden surfaces complete all as specified and directed. |
| 88 | Material and labour for preparation of old treated surfaces of steel of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 89 | S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 90 | S&F in repair PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 91 | S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 92 | S&F in repair PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed |
| 93 | S&F PVC (SWR) bends for 75mm dia PVC pipes with rubber ring joints complete all as specified and directed |
| 94 | S&F PVC (SWR) bends for 110mm dia PVC pipes with rubber ring joints complete all as specified and directed |
| 95 | S&F PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal complete all as specified and directed |
| 96 | S&F PVC (SWR) 75 mm bore junction single, (Single T) equal or unequal complete all as specified and directed |
| 97 | S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed |
| 98 | S&F PVC (SWR) floor trap 75 mm dia plain with grating including jointing with solvent cement complete all as specified and directed. |
| 99 | S&F 110mm dia PVC (SWR)WC connector with lip ring complete all as specified and directed |
| 100 | Excavation in trenches n.exc 1.5 M wide and n.exc. 1.5 M deep for manhole and getting out in soft/loose soil complete all as specified and directed. |
| 101 | Demolition and breaking up drain pipes of 150 mm dia (SGSW/AC/RCC/PVC) set in cement mortar including bed concrete and removal of debris to low lying area of distance not exceeeding 100m complete all as directed by Engr-inCharge. |
| 102 | M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipe including under, and hunching against the sides of pipes after they are laid and tested for 150mm dia pipe complete all as specified and directed. |
| 103 | S&F reinforced concrete pipes, class NP-2, laid and jointed complete 150mm dia as in repair complete all as specified and directed. |
| 104 | Cutting into existing manholes for connecting new drains 150mm internal dia of pipe making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 using 20 mm graded mechanically crushed stone aggregates smooth finished and reforming benching as required all as specified. |
| 105 | Returning, filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
| 106 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 107 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 108 | M&L for Joist, channel, angle, or tee sections,flat , Fe 410 -W (Gde E- 250) quality A fixed independently, with or without connecting plates, etc complete all as specified and directed. |
| 109 | S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as spcified and directed. |
| 110 | Dismantling of Plain or corrugated steel/fibre sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 111 | M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 112 | M& L for providing factory made modular kitchen having sink with bowl & double draining board, coocking platform and electric chimney of reputed make as per manufacturer instruction complete all as specified and directed. |
| 113 | Taking down carefully aluminium point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces all as specified and directed by Engineer in charge. |
| 114 | M&L for Point wiring of one light point controlled by one switch with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including GI sunken box terminal boxes duly painted with two coats of anti-corrosive paint in side and inner and outer cover for mounting ofmodular switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire including sunken box and modular plate and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge. |
| 115 | Ditto as above but for One fan point controlled by one switch. |
| 116 | Ditto as above but forOne bell/buzzer control by Bell push. |
| 117 | Ditto as above but for One socket point controlled by one switch on same board. |
| 118 | Ditto as above but for One socket point controlled by one switch on Independent board. |
| 119 | Description all as per item above here in before but with 1100 volts grade copper standard conductor cable of size 2.5Sqmm with 1.5Sqmm solid copper conductor PVC for 3 pin switch socket outlet15Amp independent board complete all as specified and directed by Engineer in charge . |
| 120 | Taking down existing ceiling fan after disconnecting electrical connection, removing carefully without damage, and depositing the same to KV authorities. Obtaining necessary receipt voucher (RV) and submitting the same to Engineer-in-Charge. Complete in all respects as specified and directed. |
| 121 | Supply and fixing BLDC ceiling fans complete with blades, with remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete with anti sucide fan rod complete with hanging a as required and direted at site |
| 122 | Taking down old exhaust fan 300 mm sweep after disconnecting electrical connection, removing carefully without damage, and depositing the same to KV authorities. Obtaining necessary receipt voucher (RV) and submitting the same to Engineer-in-Charge. Complete in all respects as specified and directed. |
| 123 | Supply & fix exhaust fans steel type AC single phase 230/ 240 V of size 300 mm sweep with louver with making the hole on wall and makng good the disturbed surface a as required and directed at site. |
| 124 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete with making the hole on wall and makng good the disturbed surface as required and directed at site. |
| 125 | M/L for modular switch 1 module AC 230 volts 06 Amps single pole one way complete all as specified and directed by Engineer in charge. |
| 126 | M/L for Modular bell push switch 6 Amp AC 230 volts single pole one way complete all as specified and directedby Engineer in charge. |
| 127 | M/L for bell ding dong AC 230 volts single pole one way complete all as specified and directed by Engineer in charge. |
| 128 | M/L for Modular Socket, 6A - 2/3 pin combined 2 module AC 230 volts complete all as specified and directed by Engineer in charge |
| 129 | M/L for Modular Socket, 6A/16A - 2/3 pin combined 2 module AC 230 volts complete all as specified and directed by Engineer in charge |
| 130 | M/L for modular switch 1 module AC 230 volts 16 Amps single pole one way complete all as specified and directed by Engineer in charge. |
| 131 | M/L for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge |
| 132 | Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 133 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 134 | M/L in repair for Sub Main Wiring with Two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and 6 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two run of 6 sq mm Wire and One run of 6 Sqmm Earth wire in One RM length Measured as one unit length. |
| 135 | S & F in repair Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double doormounting flus on wall complete all as specified and directed by Engineer in charge. |
| 136 | S & F in repair of MCB, double pole, 40 Ampere breaking capacity 10 KA, 240 volts with and including taking down old unserviceable one complete all as specified and directed. |
| 137 | Supply and fixing in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP current carrying capacity in the MCB DB complete with connection testing and commissioning |
| 138 | Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. |
| 139 | Taking down water heater after disconnecting electrical connection, removing carefully without damage, and depositing the same to KV authorities. Obtaining necessary receipt voucher (RV) and submitting the same to Engineer-in-Charge. Complete in all respects as specified and directed. |
| 140 | Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. 1 M of three core 2.5 sqmm twisted copper conductor cable PVC sheathed wtih three pin plug top complete all as specified and directed. |
| 141 | Taking down Electric meter after disconnecting electrical connection, removing carefully without damage, and depositing the same to KV authorities. Obtaining necessary receipt voucher (RV) and submitting the same to Engineer-in-Charge. Complete in all respects as specified and directed. |
| 142 | Material and labour for point wiring One 3 pin socket outlet 15 amps, independent, with cables 4 sq. mm size (nominal area) stranded copper conductor FRLS, PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with modular metal flush box, 1.6 mm thick of suitable size and modular white cover plate with frame of suitable module and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 4 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed. |
| 143 | M&L Modular Socket outlet Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed by Engineer in charge. |
| 144 | M&L for Modular Switch piano, flush type single pole, one way 16 Amp all as specified and directed.. |
| 145 | Supply and fix wall mounted type, high suction, multi speed, filter less, Autocleaning,1400 m3/hr suction, inverter technology, BLDC motor operation, low noise operation, 220V AC, 50HZ, electric chimney having LED indicators and touch sensors to be installed in Kitchens including all accessories as required on the site for removal of vent gases through the ventilators complete as specified and directed. |
| 146 | Supply and Fix aluminium exhaust pipe, minimum 6 inch in diameter and upto 10 ft long for electric chimneys having a cowel at the exit of the pipe complete all Specified and directed. |
| 147 | M&L for cutting holes into or through brick walls built in in brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete for installation of Exhaust pipe complete all as specified and directed. Note - After installation the uneven surface has to be made good. |
| 148 | Suppy and fix Steel ventilators, fixed type, with glazing bars to close the exhaust outlet of the chimneys all as specified and directed. |
| 149 | Supply and fixing in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the existing DB Complete with connection testing and commissioning all as specified and directed |
| 150 | S&F LED in repair building security light fitting 12 watt LED flood light model BVP 131 of PHILIPS or equivalent complete with GI bracket clamps nut bolts a as required and directed at site all as specified and directed by Engineer in charge. |
| 151 | M&L Sand Cushioning (dry) in Trenches for protec-tion of UG Cables (below, above and around the UG Cable laid in Trenches) of 230 mm Spread thick -ness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed(NOTE : For the purpose of Payment, Punned thick-ness of Sand Cushioning only shall be Measured and Paid for). |
| 152 | S&F Sub-Class B Brick, well burnt, laid breadth-wise along the length of Cable laid in Trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed. |
| 153 | Supply & Laying or Fixing or Passing in repair through Pipe, XLPE insulated, Armoured, Electric Power UG Cable (Heavy Duty) with Aluminium Conductor, 1100 Volt Grade, Nominal Cross-Sectional Area 35 Sqmm 3.5 Core including Brass Compression Cable Gland, Terminal Lug, etc., and Testing, complete all as specified and as directed. Please Enable Macros to View BoQ information |