|
| 1 | Section- I Civil Works |
| 2 | 5.1.10Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 3 | 5.6.1Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 4 | 5.3.1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level |
| 5 | 5.3.1.41:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggreagte 20 mm nominal size) |
| 6 | 22.14Grading roof for water proofing treatment with22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size) |
| 7 | JSOR {M-239(ii)}, page no.62,point no.53Providing & supplying Cico liquid / impermo water proofing compound in cement concrete or cement mortar @ 2% of cement quqntity by weight ( as specified) for water proofing, including all carraige and taxes . |
| 8 | 5.7.3Providing 12 mm Thk. cement plaster(1:6) on inside walls with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I |
| 9 | 5.7.6 Providing 6mm cement plaster(1:4) in ceiling with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I |
| 10 | 5.7.3Providing 12 mm thick water proof CEMENT PLASTER (1:6)on outside wall with clean coarse sand of F.M.1.5 and 5% cico including cost of screening, curing making grooves with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. (Cost of cico will be paid separately) |
| 11 | 5.10.7Disrnantling old plaster and pointing in cement or lime and raking out joints to 15mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/|. |
| 12 | 5.8.9Extra for cleaning the old surface by scrapping the entire old white wash or colour wash rncluding cost of scaffolding all complete as per direction of E/I. |
| 13 | 11.37Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 14 | DSR 13.80Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 15 | DSR 13.46.1Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 16 | 5.8.18Providing two coats of oil bound distemper of approved make & shade over a coat of cement primer over new surface including preparing the plastered surface by rubbing, smooth with pumic stone or fine sand paper, aplying putty wherever required, scaffolding , washing of flores and taxes etc. all complete as per building specification direction of E/I. |
| 17 | 5.3.25Providing G.I. pipe hand rails with 40mm G.I. pipe of I.T.C. or equivalent make properly fitted and fixed in position to rail posts with all necessary accessories and taxes all complete as per building specification and direction of E/I. |
| 18 | DSR 12.42.2Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 19 | DSR 12.42Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 20 | 12.42.5.2110 mm bend |
| 21 | 12.42.6.2Shoe 110 mm |
| 22 | 5.10.34Providing 150mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 23 | 5.3.8Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. |
| 24 | 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 25 | DSR 21.3.1Providing and fixing glazing in aluminium window, ventilator shutters etc. with EPDM / Neoprene gasket etc complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): |
| 26 | 5.5.12Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flats as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site, hoisting as per building specification and direction of E/I. |
| 27 | DSR 10.14.1.1Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge Fixing with adjustable lugs with split end tail to each jamb |
| 28 | 5.4.34Supplying, fitting & fixing 30mm thick solid core type decorative single leaf flush door shutters in doors with both side decorative venier with black board core bended with high quality in all formaldehyde synthetic resin of standered with aluminium fittings such as hinges, tower bolts, handle, cleats aldrop, door stopper & sand blocks & taxes all complete as per detail drawing building specification & direction of the E/I. |
| 29 | 5.6.28Providing and laying VITRIFIED FLOOR TILES in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. (Approved brand - Kajaria/ Asian/ Somany) |
| 30 | DSR 11.50Deduct for not grouting the joints with white cement and matchingpigment in the items of fixing of vitrified tiles. |
| 31 | 5.6.19Providing and laying 15 mm - 23mm thick Kotah stone slab riser steps of approved size, texture and colour over 19 mm thick base of lime morter (1:1:1 ) lime putty:surkhi:coarse sand over and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete job as per specifications and direction of E/I. (iv) 600 x 600 mm size |
| 32 | DSR 8.6Mirror polishing on marble work/Granite work/stone work where everrequired to give high gloss finish complete. |
| 33 | 5.8.45Providing two coats of synthetic enamel paint of approved shade and made over steel surface including cleaning the surface thoroughly including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I |
| 34 | DSr/26.86.7Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shallbe acceptable. Variation in profile dimensions on plus sideshall be acceptable but no extra payment on this account shallbe made |
| 35 | 26.86.7 Frame size 65 x 150 mm |
| 36 | DSR/26.87Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of requiredsize comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately |
| 37 | 26.87.1 30 mm thick |
| 38 | 5.10.11Taking down chaukhats in doors including stacking serviceable material in countable stackes within 15 m lead and disposal of unserviceable materials with all leads all complet as per direction of E/I |
| 39 | 5.10.10Taking down old door and window shutters including stacking serviceable rnaterials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/|. |
| 40 | CARRAIGE OF MATERIALS |
| 41 | (a) Bricks (1K+25P) = 26 KM |
| 42 | (b) Local Sand (3 Km ) |
| 43 | (c) Coarse Sand (1K+9P=10 Km ) |
| 44 | (d) Stone Chips (35 Km ) |
| 45 | (e) Cement (5 Km ) |
| 46 | WATER SUPPLY & SANITARY |
| 47 | 3.2.1Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. Flushing cistern with munally controlled device (handle lever) conforming to IS:7231 Parryware/ Hindware with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. |
| 48 | White Vitreous China Orissa pattern W C pan of size 580 X 440 mm with integral type foot rest. |
| 49 | DSR 17.7Providing and fixing Wash basin with C.I/M.S brackets, 15mm C.P. pillar cock 32mm C.P brass waste of cutting and making good the wtherever require. |
| 50 | 17.7.2Falt back wash basin size 630X450 mm with a single 15mm C. P. pillar tap. |
| 51 | DSR 17.70.1Providing and fixing PTMT Bottle Trap for Wash basin and sink Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms |
| 52 | DSR 18.64 Providing and fixing PTMT/ C.P. swivelling shower,15mm nominal size, 95mm long, 65mm dia. of approved quality, color & make weighing not less than 40 gms with approximate 80 holes of 1.2 mm dia. |
| 53 | DSR 17.72Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 54 | 17.73Providing and fixing c.p. towel rail complite with brackets fixed to wooden cleats with c.p.brass screws with concealed fitting arangement of approved qualite colour and make.(Prayag or equipment) |
| 55 | 17.73.1 450mm long towel rail with total elgnth of495mm,78mmwide and effective hight of 88mm, weighin not less than 170gms. |
| 56 | 18.49.1/ D.S.R.Providing and fixing C.P. brass bib cock of approved conforming to IS 8931 |
| 57 | 15mm nominal bore approved brand C.P. fittings |
| 58 | 18.51/ D.S.RProviding and fixing C.P.brass long body bib cock of approved quality conforming to standard and weight not less thain 810gms. |
| 59 | 15mm nominal bore approved brand C.P. fittings |
| 60 | DSR 18.65 Providing and fixing C.P Soap Dish Holder having length of 138 mm breadth 102 mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms |
| 61 | 18.17/ D.S.R.Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end ) |
| 62 | 18.17.232MM nominal bore. |
| 63 | 18.18/ D.S.R.Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. |
| 64 | 18.18.220mm nominal bore |
| 65 | 18.18.325mm nominal bore |
| 66 | 17.31Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 67 | 18.58Providing and fixing PTMT grating of approved quality and colour. |
| 68 | 18.58.2 Rectangular type with openable circular lid18.58.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating |
| 69 | 18.50.1Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15mm nominal bore |
| 70 | 18.74.2Providing and fixing unplasticised P.V.C. connection pipe with c.p. nuts collar and bush of approved quality. |
| 71 | 15 mm nominal bore with 45 cm length. |
| 72 | 12.41/ DSRProviding and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (SOIL, WASTE & VENT PIPES) |
| 73 | 12.41.175 mm outer dia |
| 74 | 12.41.2110 mm outer dia |
| 75 | 12.42 D.S.RProviding & fixing on wall face unplasticised -P.V.C. moulde fittings / accessories for unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . |
| 76 | 12.42.1Coupler - |
| 77 | 12.42.1.175 MM |
| 78 | 12.42.1.2110 MM |
| 79 | 12.42.2Single pushfit Coupler |
| 80 | 12.42.2.175 MM |
| 81 | 12.42.2.2110 MM |
| 82 | 12.42.3Single tee with door |
| 83 | 12.42.3.175X75X75 MM |
| 84 | 12.42.3.2110X110X110 MM |
| 85 | 12.42.4Single tee without door |
| 86 | 12.42.4.175X75X75 MM |
| 87 | 12.42.4.2110X110X110 MM |
| 88 | 12.42.5Bend 87.5° |
| 89 | 12.42.5.175 MM |
| 90 | 12.42.5.2110 MM |
| 91 | 12.42.6/ D.S.R.SHOE - 110MM |
| 92 | 12.42.6.175 MM |
| 93 | 12.42.6.2110 MM |
| 94 | 12.43/ D.S.R.Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 95 | 12.43.175 MM |
| 96 | 12.43.2110 MM |
| 97 | 18.8Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I.(Approved Brand - ASTRAL/ SUPREME) |
| 98 | Concealed work including cutting chases and making good the wall etc.. |
| 99 | 18.8.1.15mm dia |
| 100 | 18.8.2.20mm dia |
| 101 | 18.7Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL) |
| 102 | Exposed on Wall |
| 103 | 18.7.325mm dia |
| 104 | 18.7.432 mm dia. |
| 105 | 19.6Providing and laying non- pressure NP2 class ( light duty ) R.C.C. pipes with collars jointed with still mixture of cenent mortar in the proportion of 1:2 ( lcement : 2 fine sand ) including testing of joints etc. complete. |
| 106 | 19.6.2150 MM dia R.C.C. pipe |
| 107 | 19.30.1.1/ D.S.R.Constructing brick masonary chamber for Underground C. I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455X610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG. (weight of cover 23 kg. and weight of frame 15 kg) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand :10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: |
| 108 | Inside dimensions 455X610X mm and 45 mm deep for single pipe with F.P.S. bricks |
| 109 | 18.48/ D.S.R.Providing and placing on terrace ( at all floor levels ) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but wi |
| 110 | Electrical Installation Work |
| 111 | Note- (i)PVC insuleted copper conductor cable of make:-Havell's/HPL/KEI/Polycab(ii)PVC conduit of thikness 1.5mm/2mm for wiring:-Polycab/Klinga/Saini star(iii)Switches/soket outlet for piano type:-Anchor/ Cona/Keny(iv)Switches/soket outlet for modular type:-Roma(Anchor/wood)/Havell's(carbtree)/ Hpl/Philips(v)MCB-DB, Mccb,Mcb,SFU,Changeover,Rccb:-Havell's/Hpl/L&T/Legrand(vi)XLPE/PVC aramoured cable:-Havell's/polycab/capital/V-guard(vii)Electrical fitting/fixtures:-Bajaj/Philips/Crompton/wipro/Hpl(viii)All internal wiring work should be recessed(conseeld) |
| 112 | 1.3 Point wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with modular type switch, pheonlic lamineted sheet,suitable size G.I.box etc. |
| 113 | 1.3.1 Group A |
| 114 | 1.7Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required |
| 115 | (1.7.1)2x1.5 sq.mm. +1x1.5 sq.mm. Earth wire |
| 116 | (1.7.2)2x2.5 sq.mm. +1x2.5 sq.mm. Earth wire for light/fan cicuit. |
| 117 | 1.27S/F Modular boxes, base & covre plate:-following size/ modular G.I box along with modular base & cover plate for modular switches in recess etc, as required. |
| 118 | 1.27.4 8/9 module(78mmx230mmx60mm) |
| 119 | 1.24S/F modular type switch /socket :- Supplying and fixing following modular type switch box/cover including connections but excluding modular plate etc as required |
| 120 | (1.24.1)5/6amp switch |
| 121 | (1.24.4)3pin 5/6 amps, socket outlet |
| 122 | (1.25)S/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connectionons but excluding modular plate etc, as required. |
| 123 | 1.32S/F power plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch conection painting etc, as required. |
| 124 | 1.33S/F ceiling rose:-Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required. |
| 125 | 1.48ITC exhaust fan up to 450 mm, sweep:-Installation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required. |
| 126 | 2.6S/F Sheet metal ON/OFF-Load chenge over:-Providing and fixing following capacity 2 pole/ 4 pole ON/OFF-Load chenge over switches with side handle opreation, in sheet inclosure in existing panel board including drilling holes in metal board, making connection, earthing the body etc as required |
| 127 | (2.6.4)63 amps, 4 pole |
| 128 | 2.11MCB & MCB DB'SS/F \\"B\\" series, S.P. MCB: Supplying and fixing 6 amps to 32 amps, rating, 240 volts, 'B' series, maniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required . |
| 129 | (2.11.1)6/32 amps, Single pole, \\"B\\" series |
| 130 | 2.12S/F 'C' series. S.P.MCB:-Supplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required. |
| 131 | (2.12.6)40 amps ,DP |
| 132 | (2.12.10)50/63 amps, TPN |
| 133 | 2.13S/F SP MCB blanking plate:-Supplying and fixing Single pole blanking plate in exiting MCB DB complete etc as required. |
| 134 | 3.2G.I Earth pipe electrode with salt charcoal :-Earthing with G.I. earth pipe 4.5 mtr long,40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required. with salt charcoal or coke. |
| 135 | 3.12S/L 25mmX6mm G.I. earth strip in ground :-Supplying and laying 25mmX6mm G.I.strip 0.50 metre bellow ground as strip level earth electrode, including soldring etc. as required. |
| 136 | 4.4Reverting, sweating and soldering of copper/G.I. tape(with another coppr/G.I. tape, base of the finial or any other metallic object) as required. |
| 137 | 4.8P/F G.I lightning conductor tape in vertical run:-Providing and fixing copper tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(for vertical run) |
| 138 | CABLE (External electrical work) |
| 139 | CODE No.M-775Providing of 12'' (300 mm)exhaust fan of make bajaj/havells/usha/crompton |
| 140 | 9.4SITC of following size ceiling fan three blad confirming to IS: 374:2019 including wiring the download of standard length (upto 30 cm) with 1.5 sqmm FRPVC insulated, copper wire sutable for 230 V 50 Hz 50Hz single Phase supply etc complete as required9.4.1 1200mm (48\\") Ceiling fan |
| 141 | 9.5SITC of following rate in surface mounted LED tube light fitting suitable for 230V 50HZ, single phase supply etc complete as required.9.5.220/22 W LED Tube light |
| 142 | 9.1SITC of following rating LED street lighting luminarie with pressure die cast housing and toughened glass cover, IP 66 Protection, LUMINOUS EFFICARY>110 LM/W, with lens in existing pole/ Pipe for supply voltage 100-270 V AC, 50 HZ. Luminarie shall be confirm to IS: 10322 Par-5/ Section -3 and shall be complete with all neccessary accessories as required.9.1.670/72 W LED Streel Light |
| 143 | Add 18% GST |
| 144 | Add 1% Lebour Cess Please Enable Macros to View BoQ information |