|
| 1 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar 15.10.2 |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 15.2.1 |
| 3 | Earth work in excavation by mechanical means (hydraulic excavator)/ manual means in foundation trenches of drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m, : All kinds of soil. As per DSR item no. 2.8.1 |
| 4 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Make:- Johnson, Spenza, Kajaria. (DSR No. 8.31) |
| 5 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1) cement 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shade Area of slab over 0.50 sqm as per DSR item No.8.2.2.2 |
| 6 | Fixing, Ceramic tiles with high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. NSI |
| 7 | Providing and laying 60mm thick high density factory made cement Concrete interlocking paver blocks (with color pigment) of M 30 grade made by rubber mould table type platform with strong vibrarting compaction hydraulic press compaction method of approved size and design /shape laid in required colour and pattern over the 20mm thick cement mortar 1:4 (1 cement 4 course sand) as per the directions of Engineer-In-Charge. |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work.(13.99.1) |
| 9 | Providing and fixing of LED fountain colourful light 9 watt 4\\" body made of Stainless Steel including cost of MS frame with nut and bolts of fountain light complete in all respects. |
| 10 | Providing and fixing of copper wire 3.5 core 2.5 mm complete in all respects. |
| 11 | Providing and fixing of light single module power supply with RAF controller complete in all respects. |
| 12 | Providing and fixing of 04 nos. 12\\" diameter Speaker connected with Digital power Amplifier Module of frequency 50 - 60 Hz with two aux input including resettable circuit breaker for protection against overload and Automatic Bluetooth/ Pendrive connected Amplifier system through 2.5 sqmm wire passing through 1\\" PVC pipe with excavation complete in all respects as per satisfaction of EIC. (NSI) Make: - JBL, Sony, Boat etc. |
| 13 | Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works.(10.25.2) |
| 14 | Providing and Fixing of 160mm HDPE pipe (PN-6) (Natural) PE 100 rsin) as per 4984-2016 IS marked ground including the cost of specials like collar, tee bends, end, cap, etc. excavation, trenching, refilling, laying, lowering, jointing with solvent , testing commissioning (beyond 1.5 mtr) complete in all respects. Make: Himalayan/Jain/ Restwell/ Duraline NSI. |
| 15 | Providing and fixing D.I. sluice valves 100 mm (with Cap) IS marked complete with bolts, nuts, rubber insertion, carriage, loading , unloading etc. (the tail Piece if required will be paid separately). |
| 16 | Providing and fixing D.I. sluice valves 150 mm (with Cap) IS marked complete with bolts, nuts, rubber insertion, carriage, loading , unloading etc. (the tail Piece if required will be paid separately). |
| 17 | Filling available excavated earth (excluding rock) in trenches, plinth sides of foundations in layers not exceeding 20cm in depth ramming and watering lead up upto 50m and life upto 1.5m. (110mm dia.) |
| 18 | Carriage of materials by mechanical transport including loading, unloading and tacking of earth of 3km lead complete in all respects. |
| 19 | Construction of brick masonry chamber for sluice valve including excavation, 1st class brick work in cement sand mortar 1:4 etc. complete in all respects. Size 4”x4”x4” |
| 20 | Providing and fixing RCC cover 1:2:4 of 3.5” thickness of complete in all respects. |
| 21 | Providing and fixing specials (Bend 6\\" x 150) |
| 22 | Labour for making arrangement for connection of proposed HDPE pipe with the existing pipe line including cost cutting of existing pipe, labour, tool, rent of generator set and welding set, dewatering & refilling etc. (6\\"x4\\") |
| 23 | Cutting and welding of 2\\" Pipe for cleaning of entire pipe with pressure jet for removing the any obstacle from pipe complete in all respect to the entire satisfaction of EIC. |
| 24 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinth level 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR NO.:4.1.2 |
| 25 | Providing and fixing of stainless steel nozzels of size 1/2\\" for straight jet including connection pipe complete in all respect.(NSI) Please Enable Macros to View BoQ information |