|
| 1 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 3 | 250x10 mm |
| 4 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 5 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 6 | 100 mm |
| 7 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete |
| 8 | Twin rubber stopper |
| 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 10 | For fixed portion |
| 11 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 12 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 13 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 14 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 15 | Pre-laminated particle board with decorative lamination on both sides |
| 16 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 17 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 18 | Providing & Fixing Elegant wood perforated tile 9mm having absorption coeffiecient 1.01 @315 Hz.Supplying Acoustics Elegant Wood perforated Tile made up of cement fiber 600x600/300X1200 X9mm with square edge density 1050kg/m3 covered with laminate on front side and Acoustics fibre on the back side, thus making it acoustically absorbtive, water resistance, fire resistant. The tiles are anti sag and The installed system should provide Abs coeff. of 1.01 @ 315 Hz tested as per IS:8225/ISO:354/ASTM 423C To be installed with Aluminium H Profile on GI studs with the layer of water-resistant Coating 600x600mm centre to centre 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of 1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 for excellent results and include scaffolding. color and desgin as per the direction of EE/ Institute |
| 19 | Providing & fixing 80mm ( solid both side PCGI PUF FILLED) Wall panels of double skin type of made Tata 0.5mm GI sheet galvanised sttel sheet powder coated ( more than 60-80 micron ) with approved jutun color panel to be non progrssive ( removable type ) puf ( density 40 kg/cum) as infill material and all side packed material inclusive all Aecesseris etc per direction of engineer incharge. |
| 20 | Providing and fixing of 44 MM thick doors in made with TATA 0.8 MM thick Gl sheets on both sides with Honeycomb as infill 1.2MM thick GI door frames with powder coated suitable to fix in wall partitions or Brickwall. Accessories Included:- 1. SS Ball Bearing Hinges 4\\"x3\\"x3MM 2. Silicon sealeant filling in panel and filling all gaps.etc and C- channel 3. Dead Lock set with both side key operation cylinder 4. Fash Mounted Door Closer with STD Arm- 80Kgs5. Automatic Alu. Drop Seal CAT-III 6. SS304 D Type B2B Handle - 19*250 mm 7. EPDM P Type Door Seal 9x6 mm. 8.inbuild conduit pipes for electrical wiring and c- channel , pvc cap .9 double glaged toughned galss 5 mm thich size 400x600mm. 10. S.S D type handle 19x 300mm back to back Please Enable Macros to View BoQ information |