|
| 1 | S&F in repair aluminum anodized barrel tower bolt of extruded section 200 mm long complete all as specified (ISI Marked). |
| 2 | S&F in repair SS butt hinges medium weight cold rolled 100 mm ISI marked complete all as specified incl. required welding etc in repairs. |
| 3 | S&F in repair extruded aluminum alloy handle 125 mm sizefabricated type complete all as specified (ISI Marked) and fixed in repair. |
| 4 | S&F in repair aluminum anodized sliding door bolts 300 mm long with hasp and staple (bold type)and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed not less than 12mm dia with,complete all as specified (ISI Marked) fixed in repair. |
| 5 | S&F in repair aluminum door closer hydraulically regulated designation No. 2 universal type (ISI Make) suitable for door shutters of weight between 36 to 60 Kg complete all as specified. |
| 6 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stain less steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed. |
| 7 | S&F in repair door stopper of aluminum alloy body and tongue double legged anodized with hard draw steel spring over all length of cover plate 150mm fixed in floor all as specified (ISI Marked). |
| 8 | S&F in repair magnet typePVC door stopper 30 to 40mm dia fixed with screw behind the door all as approved by Engr -in-Charge. |
| 9 | Hacking out old broken glass (any thickness/ size/ quality/ description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified. |
| 10 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc. 0.5 sqm in each pan complete all as specified. |
| 11 | S&F 4mm thick figured glass pin head type and glazing with oil putty in square n. exc. 0.50 Sqm in each pane. |
| 12 | S&F in repairs 600x450mm 5.5mm thick mirror aluminum frameof selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wood plugs with complete all as specified. |
| 13 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples/ with wooden beading on steel windows/ in wooden doors complete all as specified. |
| 14 | S&F in rep bracket L type 300x200mm for fixing support as dressing table/study table. |
| 15 | Re-screwing or easing & adjusting with out taking down shutter of and description exc 1Sqm & n.exc 2 Sqm. |
| 16 | S&F in repair Ist class Hard wood beading straight glazing/gauged including metered etc and removal old beading. |
| 17 | S&Fin repair MS Rat tail rod pattern spring including roller and roller plate complete of300mm long welding to steel chowkhat. |
| 18 | S&F in repair continuous (piano) hinges mild steel bright finish width of flap 40 mm (when open) all as specified. |
| 19 | S&F 40 mm dia PVC cupboard knob fixed with nut and screw and washer all as direcrted by Engr-in-Charge. |
| 20 | S&F in repair PVC Box type mirror cabinet 450x350 mm size modular type, Make Prayag. |
| 21 | Re-screwing or adjusting aluminum shutter with out taking down shutter and repair/replacement of butt hinges/pivote of aluminu door exc 1Sqm & n.exc 4 Sqm all as directed by Engineer-in-charge. |
| 22 | Re-screwing or easing & adjusting 12 mm thick glass doors with out taking down shutter and repair/replacement of pivote of glass shutter exc 1Sqm & n.exc 4 Sqm all as directed by Engineer-in-charge. |
| 23 | S&F SS plate rack 1mm thickof Size 31\"x36\"x10\" Code No 1049 Make Swasti Nirali . |
| 24 | S&F stainless steel peg set of five hooks as approved directed by Engineer-in-Charge. |
| 25 | S&F door bottom seal for wooden doors made of aluminium channel as approved directed by Engineer-in-Charge. |
| 26 | S&F25 mm diastainless steel curtain drapery rod decorative type cut to length and fixedcomplete all as specified and directed. |
| 27 | S&F brackets suitable for 25mm diastainless steel curtain rod complete all as specified and directed. |
| 28 | S& F in repair Mortice lock in aluminium doors all as per direced. |
| 29 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing)removing the rubbish outside MD land complete all as specified. |
| 30 | M & L for light shade Virified Ceramic tiles 10 mm double charge thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over and including 15mm thick screed bedding in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match,complete all as specified. |
| 31 | M&L non skid ceramic tile area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm thick in floor etc 15mm thick screed bedding in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match,complete all as specified.Make :-Orientbell/Somany/Kajariya/Nitco/Johnson. |
| 32 | S&F glazed ceramic coloured tile 450x350x7mm thick in patch white on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white cement to match including 10 mm thick rendering in CM 1:6 even and fair to receive tiles etc complete all as specified. |
| 33 | Taking down cement plaster of any description including racking out joint hacking for key scribing down with water etc complete all as specified. |
| 34 | M&L for 15 mm rendering in patch CM 1:4 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified including mixing with water proofing compound as directed by Engineer-in-Charge. |
| 35 | M&L for rendering 10mm thick in CM 1:6 on brick surfaces even and smooth (w/o using extra cement.) |
| 36 | M&L for preparation of newly plastered surface and applying two coats of oil bound distemper over a chalk whitening on walls surfaces complete all as specified and directed. |
| 37 | M&L for preparation of new-plastered surfaces of wall and applying two coat of cement base paint over a primer complete all as specified and directed. |
| 38 | Plumbing/Sanitary appliances: |
| 39 | Taking down 15mm bore GI water tubing including all fitting complete all as specified. |
| 40 | Taking down 20mm bore GI water tubing including all fitting complete all as specified. |
| 41 | Taking down 25mm bore GI water tubing including all fitting complete all as specified. |
| 42 | Cutting chases ,pinning in making good to facing where required of brick walls and pointed in cement mortar 1:3 for concealed water tubing etc cutting not exc 10 cm girth. |
| 43 | S&F 15 mm bore GI water tubing (ISI Marked) medium grade in any length including all fittings fixed to wall or in floor complete all as specified. |
| 44 | S&F 15mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2with all fittings and fixed complete to walls and ceiling or laid in floors |
| 45 | S&F 20 mm bore GI water tubing (ISI Marked) medium grade in any length including all fittings fixed to wall or in floor complete all as specified. |
| 46 | S&F 25 mm bore GI water tubing (ISI Marked) medium grade in any length including all fittings fixed to wall or in floor complete all as specified. |
| 47 | Taking down 15mm bore GI tube and connection including cleaning and re-fixing in same place with clip . |
| 48 | Taking down 20mm bore GI tube and connection including cleaning and re-fixing in same place with clip . |
| 49 | Taking down 25mm bore GI tube and connection including cleaning and re-fixing in same place with clip . |
| 50 | Dismantling of water tanks exc 250 and n. exc. 500 ltr and removing to store. |
| 51 | S&F 500ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted all as specified. |
| 52 | Dismantling of water tank and removal to store yard exc 500 and n.exc 1000 ltr. |
| 53 | S&F 1000 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted all as specified. |
| 54 | S&F 150 x 150mm stainless steel grating fixed on floor /Nahani trap in repair all as specified in E-in-Charge. |
| 55 | S&F in repairs PVC valve 10 Ltr capacity symphonic action type flushing cistern level white with inlet ball valve float and handle push type incl. Flush pipe 32 mm dia and connecting to WC complete all as specified. Make – PILOT/Hind ware/ Commander/Parry ware/ champion. |
| 56 | S&F in repairs stop valve cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe 15 mm size complete all as specified. |
| 57 | S&F in repairs fancy type stop valve Chromium plated screweddown high pressure screwed both ends for iron pipe 15 mm size complete all as specified. |
| 58 | S&F in repairs pillar taps cast copper alloy with capston head CP screwed down high pressure with or without lettered “hot or cold” with long screwed shank and fly nuts for iron pipes 15 mm bore |
| 59 | S&F in repairs fancy type pillar taps cast copper alloy CP screwed down high pressure with or without lettered “hot or cold” with long screwed shank and fly nuts for iron pipes 15 mm bore Make : cera |
| 60 | S&F in repairs 15 mm bore CP brass bib tap with crutch or butterfly handlesscrewed down screwed for iron pipe complete all as specified.(ISI marked). |
| 61 | S&F in repairs 15 mm bore CP brass bib tap fancy type screwed down screwed for iron pipe complete all as specified.(ISI marked). |
| 62 | S&F15 mm dia bore Toilet hand shower (Health Faucet) with 8 mm dia and 1.00 mtr long flexible tube and wall hookcomplete all as directed. |
| 63 | S&F in repairs vitreous china squatting pan water closet ‘orrisa’ pan size 580x440mm incl. Integral foot rest including cement concrete bedding etc complete all as specified. |
| 64 | 37. S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white(european type) (excluding fixing bolt flushing cistern and flush pipe |
| 65 | S&F vitreous china semi-pedestal pattern white (anglo-indian type) white (excluding fixing both flushing cistern and flush pipe) complete all specified in repairs. |
| 66 | S&F in repairs wash hand basin vitreous china white flat black size 550x400 mm fixed on existing bracket incl. one No CP brass fitting & one No PVC connection 15 mm bore 45 cm long heavy duty and connecting to existing GI pipe or stop valve complete as specified. |
| 67 | S&F in repairs vitreous china urinal half stall type, incl. Connection to flushing pipe and outgoing pipe complete all as specified. |
| 68 | S&F in rep ballvalves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of25 mm ( min wt 455gm). |
| 69 | S&F in rep ballvalves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of20 mm ( min wt 210gm). |
| 70 | S&F in rep ballvalves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of15 mm ( min wt 142gm). |
| 71 | S&F in repairs swan neck pillar taps cast copper alloy with capston head CP screwed down high pressure with or without lettered “hot or cold” with long screwed shank and fly nuts for iron pipes 15 mm bore MAKE : cera/jaquar or Equivalent. |
| 72 | S&F in repair 15 mm CP brass two way angle cock stop valve all as specified and directed by Engineer-in-Charge.MAKE : cera/jaquar |
| 73 | S & F in repair15 mm dia Fancy type Chromium plated Angle valves, cast copper alloy screwed down high pressure, with crutch or butterfl y handle, screwed both ends for iron pipe or for unionscomplete all as directed. |
| 74 | S&F CP brass mixer pillar cock 15mm bore with 02 Nos PVC connectionall as directed by Engr-in-Charge.MAKE : cera/jaquar |
| 75 | S&F CP brass hot and cold water mixer cock 15mm bore withbutter fly handlesall as directed by Engr-in-Charge.MAKE : cera/jaquar |
| 76 | S&F 15 mm stainless steel telescopic handspray/shower chromium plated. |
| 77 | S&F in repair 15 mm CP brass concealed stop valve. |
| 78 | S&F in repair PVC connection 15mm sizewith PTMT nuts of length 60cm |
| 79 | M&L cleaning of existing tanks of any description provided on roof including removing all scale and dirt etc. from tanks and from mouth of circulations pipes and washed with beaching powder all as directed by Engineer-in-Charge capacity exc 250ltr and not exc. 500 ltrs. Note :- Date of cleaning shall be marked on tank with synthetic enamel paint. |
| 80 | M&L cleaning of existing tanks of any description provided on roof including removing all scale and dirt etc. from tanks and from mouth of circulations pipes and washed with beaching powder all as directed by Engineer-in-Charge capacity exc 500ltr and not exc. 1000 ltrs. Note :- Date of cleaning shall be marked on tank with synthetic enamel paint. |
| 81 | S&F swivel shower of PTMT any colour for fixing with 15mm pipe minimum weight 40gm fixed in repair. |
| 82 | S&F in repair brass Chromium plated shower roses of 125mm size with swivel joints including fixing to steel pipe or union complete all as specified and directed |
| 83 | S&F PVC cover for water storage tank for 500ltr/1000 ltr. |
| 84 | S & F stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen with plug, washers,&waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cost iron cantilever brackets and connecting union to pipe, over all size 915mmx460mm bowl size 495mm x 420mm bowl size 410mm x 330mm x 160mm all complete (Make - Nirali, Swastik Prayag and equivallant). |
| 85 | S&F in repair in rep waste fitting (Coupling) 32mm brass CP for glazed ware sinks, basins, etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other and fixed. |
| 86 | S&F in repair in rep waste fitting (Coupling) 40mm brass CP for glazed ware sinks, basins, etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other and fixed. |
| 87 | S&F 32mm dia PVC flexible waste pipe for WHB/Sink, length 60 to 100cm. |
| 88 | S&F 40mm dia PVC flexible waste pipe for WHB/Sink, length 60 to 100cm. |
| 89 | S&F 8mm thick glass shelf size 450mmx100mm with SS brackets/rail as approved and directed by Engineer-in-Charge. |
| 90 | S&F 8mm thick glass corner, radius not exceeding 300mm dia with SS brackets/rail as approved directed by Engineer-in-Charge. |
| 91 | S&F CP towel rail 600 mm long complete all as directed. |
| 92 | S&F tubular towel rail,aluminium anodised, 20mm dia, D type, 60 cm lng between flanges. |
| 93 | S&F soap dish, any type, fixed to plugs with chromium plated brass screws. |
| 94 | Supply & fixing in repair plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinged device fixed in repairs. |
| 95 | Supply & fixing in repair plastic water closet seat (Anglo Indian Style) white closed pattern with flat bottom and cover and mild steel chromium plated hinged device fixed in repairs. |
| 96 | Taking down exiting wash hand basin and refixing the same by replaceing the existing brackets with new MS angle iron brackets of size 35mmx35mmx4mm with 2 coats of painting over a coat of primer making good the disturbed portion etc all as specified and directedby Eng-in-charge. |
| 97 | Taking down chowkats or frames with shutters (without taking of shutter from the frame) not exc. 1.5 Sqm each. |
| 98 | Taking down chowkats or frameswith shutters (without taking of shutter from the frame) exc. 1.5 Sqm but n. exc.4 Sqm each. |
| 99 | Taking down shutter of any description n. exc. 1 Sqm each. |
| 100 | Taking down shutter of any description exc. 1 Sqm but n. exc. 2 Sqm each. |
| 101 | S&F 2 nd class Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 102 | M&L Factory made flush shutters 35mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in shutter all as specified and as directed. |
| 103 | M&L 35mm thick 2ndclass hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc(without shash bar ) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats and directed by Engg. In Charge. |
| 104 | S&Fsolid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete |
| 105 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawingspecification and drawing complete |
| 106 | S&F in repair 18/19 mm thick pre laminated particle board(ISI Marked)exterior grade, laminated both side fixed with screws to timber work in cupboard, cupboard shutter etc. completed all as directed by Engineer-in-charge. |
| 107 | S&F in repair 12 mm thick pre laminated particle board(ISI Marked)exterior grade, laminated both side fixed with screws to timber work in cupboard, cupboard shutter etc. completed all as directed by Engineer-in-charge. |
| 108 | M&L for 18 mm thick plywood ,grade BWP,type BB, Fixed with screws o timber frame work complete all as specified and directed |
| 109 | M&L for 0.9 mm thickness decorative laminate type 1 of surface finish,colour and pattern as approved,fixed with approved athesive as per manufacturers instruction completed all as directed by Engineer-in-charge. |
| 110 | S&F 75mm long SS butt hinges and fixed to frame with scrwewd or welding comlete.. |
| 111 | S&F for 100mm long butt hinges, medium weight , cold rolled mild steel and fixed |
| 112 | S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed. |
| 113 | All as per item No 19 above but 150mm longall as directed. |
| 114 | S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm. |
| 115 | S&F for 150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge. |
| 116 | M&L preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel over a coat of pink primer. |
| 117 | S&F mild steel hold fast etc conforming to Fe-410-0 or 310-0. |
| 118 | M&L cutting holes in brick wall for inserting hold fast etc. built in CM of depth exc. half brick wall and n. exc. one brick wll making good in CM (1:3) orPCC (1:2:4) type B0 as specified. |
| 119 | M& L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as speciifed & directed |
| 120 | Repair to wooden door, Panelled doors by removing and refixing broken/damaged styles,top,bottom,lock rails and making good by application of necessary oil paint over a primer all as spd and directed. |
| 121 | Dismantling of CI/pvc pipes 110/75mm dia and length fixed on walls/ floors. |
| 122 | S&F 100 mm bore cast iron soil waste and vent pipes in any length with or without ears, with cement joints in trenches or in floor or fixed with wall etc all as specified. |
| 123 | S&F 75 mm bore cast iron soil waste and vent pipes in any length with or without ears, with cement joints in trenches or in floor or fixed with wall etc all as specified. |
| 124 | S&F 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches. |
| 125 | S&F 75mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches. |
| 126 | S&F 100mm bore bend (any radius) with duck foot or heel rest. |
| 127 | S&F 75mm bore bend (any radius) with duck foot or heel rest. |
| 128 | S&F in repair 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor allas complete. |
| 129 | S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor all as complete. |
| 130 | S&F 110 mm dia PVC (SWR) bends any length any type. |
| 131 | S&F 75 mm dia PVC (SWR) bends any length any type |
| 132 | S&F 110mm PVC (SWR) branch piece double (double Y) equal or unequl. |
| 133 | S&F PVC (SWR) floor trap 75 mm dia including with solvent cement fixed in repair. |
| 134 | S & F stack clamp made of 50 mm X 5 mm flat iron and 16 mm dia round iron stay including nut bolts and securing ends of stay to wall or roof suitable for 100 mm bore pipe complete all as specified and directed. |
| 135 | S&F 150x150mm salt glazed stone ware gully trap ’P’ type grating fixed in repair in PCC 1:2:4 type B1 30x30x30cm with steel grating. |
| 136 | Rectification of No water supply caused due to air lock or blockage in internal or external water supply pipe line of any diameter by manual means or by using pressure pump, including tracing the cause, removing obstruction/air lock,flushing the pipeline and ensuring continuous and satisfactory flow of water up to the outlet,including taking down taps,pillar taps,angle/stop valves or simillar fittings for clearing blockages and refixing the same position complete all as specified and directed. |
| 137 | M&L for providing pre-cast cement concrete type B1, 1:2:4 with using 20 mmgrade stone aggregate set in CM 1:6 as in cover slab (manhole)/open drain etc., with plain faces all as specified and directed. |
| 138 | S&F MS steel TMT bars 6mm to 8mm dia and over cut including 10mm dia cutto length ,bent to shaprequired including cranking bending for hooping for column ,hooking ends and bindings with and including mild steel wire (annealel)not less than 0.9mm dia. |
| 139 | Cleaning of blocked kitchen sink including removing and refixing the grating in same position with cement mortar. |
| 140 | Cleaning of blocked gully trap including removing and refixing the grating in same position with cement mortar. |
| 141 | Cleaning of blocked WHB including removing and refixing the grating in same position with cement mortar. |
| 142 | Cleaning of blocked EWC. |
| 143 | Cleaning of blocked IWC. |
| 144 | Cleaning of inlet chamber. |
| 145 | Sewage lines cleaning of size 150mm and over including maneholes through chassis mounded diesel run vehicle mounded hydraulic operated high preassure suction per cum jetting sewage cleaning machine capacity including skilled operator supervising Engineer for cleaning/partial desilting of manholes and sewer line as guide lines laid in IS-11972 (1987) and complete cleaning of size all as directed by Engineer-in-Charge. |
| 146 | Sewage lines cleaning of size 200mm and over including maneholes through chassis mounded diesel run vehicle mounded hydraulic operated high preassure suction per cum jetting sewage cleaning machine capacity including skilled operator supervising Engineer for cleaning/partial desilting of manholes and sewer line as guide lines laid in IS-11972 (1987) and complete cleaning of size all as directed by Engineer-in-Charge. |
| 147 | Sewage lines cleaning of size 300mm and over including maneholes through chassis mounded diesel run vehicle mounded hydraulic operated high preassure suction per cum jetting sewage cleaning machine capacity including skilled operator supervising Engineer for cleaning/partial desilting of manholes and sewer line as guide lines laid in IS-11972 (1987) and complete cleaning of size all as directed by Engineer-in-Charge. |
| 148 | S&F in repairs 20mm bib tap standard Of PTMT any colour high pressure screwed for iron pipe and fixed (mimimum wt. 125gms) |
| 149 | M&L for special treatment to sunken portion (including necessary dismantling of tiles and PCC along with reqired PCC at site of mix 1:2:4 of required thickness) with 10mm thk plaster in CM 1:4 with WPC liquid complast 421 and applying one coat each of Nitoproof 100& Nitoproof 120 on plastered surface. Rendering again 10mm thk plast in CM 1:4 mixed with complast 421 in sunken portion of WC & CI pipe joint shall be filled including filling of lean concrete in 1:5:10. |
| 150 | Dismantling structural steel work including doors, gates but excluding framed truss etc. all as specified and as directed. |
| 151 | M&L Framed work( Fe 290 gde E 165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and uides) and hanging; also fastening and fixing complete all as specified and as directed |
| 152 | M&L painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation of surfaces, and applying two coats of synthetic enamel paint over a coat ofred oxide zinc chrome primer complete. |
| 153 | Note for all items :- If any item gets repeated in this schedule, the lowest rate quoted for those same items by the L-1 bidder shall be considered for payment and decision of Accepting Officer i.e. GE(AF) Baroda in this regard shall be final and binding. |
