|
| 1 | Demolition of lime concrete / lean concrete /Brick bats etc. from sunken slab portion exceeding 15 cm thick but above ground floors, complete all as specified and directed by Engineer-in-charge including removal of demolished material from MD land debrish away from site to a disignated point by local administration or a distance up to 1.5 km from site complete all as specified and directed. |
| 2 | Taking up or down GI steel/ Kitek tubing 15 mm with connections or fittings from wall, ceiling, floor etc complete all as specified & directed. |
| 3 | Taking up or down GI steel/ Kitek tubing 20 mm with connections or fittings from wall, ceiling, floor etc complete all as specified & directed |
| 4 | Taking down cement plaster on brick walls & concrete surfacesof building including racking out joints, hacking for key, scrubbing down with water complete including necessary scaffolding / working platform all as specified & M&L for rendering 15 mm thick on other than fair face of brick surfacesor concrete surfacein cement mortar (1:6) finished even and smoothwithout using extra cement complete all as specified & directed. |
| 5 | Taking down cement plaster on brick & concrete surfacesof building including racking out joints,scrubbing down with water complete including necessary scaffolding/working platform all as specified and M&L for Rendering 10 mm thick in cement mortar (1:4) on ceiling, complete all as specified and directed. |
| 6 | Taking down cement plaster on brick walls,parapet, chajjas, facias of building including racking out joints, hacking for key, scrubbing down with water complete including necessary scaffolding/working platform & M&L for rendering 15 mm thick on fair face of brick surfacesor concrete surfacein cement mortar (1:4) finished even and smoothwithout using extra cement complete all as specified and directed. |
| 7 | Demolition of RCC of roofs, floors (other than ground floors), beams staircases, landing, slabs, chajjas, chimney and similar suspended work at any height complete all as specified and directed. |
| 8 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exe 1.5 Sqm but n exc 4.00 sqm each complete all as specified & directed. |
| 9 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exe 1.5 Sqm eachcomplete all as specified & directed. |
| 10 | Taking down shutters of any description n. exc. 1 Sqm each and removing to or from store complete all as specified & directed. |
| 11 | Taking down shutters of any descriptionexc 1 sqm and n. exc. 2 Sqm each and removing to or from store complete all as specified & directed. |
| 12 | Demolition of cement concrete in ground floors and pavings n. exc. 15 cm thickness (Below or above ground level) complete and removing of unserviceable material out side MD landexceeding 5.00 Km and cleaning site ,complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregates as in flooring laid in slope complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L lean concrete type E-2 (1:5:10) using 40mm grade crushed stone aggregate as in sunken portion complete all as specified and directed. |
| 15 | M&L for 40mm GI tube medium grade Spout pipe for sunken work complete all as specified & directed. |
| 16 | M&L for providing water proofing tratment of sunken horizental & vertical surfaces portion of WCs, bathroom etc. by applying cement slurry mixed with Acrylic based polymer modified cementitious composite compound coating of make as approval in Technical Instruction 5/2003 by adding :(a) 15mm thick plaster (1:4) cement sand mortar with integral water proofing compound 2% by weight of cement on floor and wall / beam, finishing the surface even and smooth without using extra cement. The surface shall then be cured and allwed to dry. (Note : Water proofing compound shall be measured and paid separately).(b) Applying first layer of slurry of cement @0.5 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.25 kg/sqm on plastered surfaces. This layer will be allowed to air cure for 4 hrs. (c) Second layer of slurry of cement @0.25 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.15 kg/sqm over first layer. This layer will be allowed to air cure for 4 hrs followed with water curing for 48 hrs. complete all as specified and directed by Engineer-in-charge.NOTE : Floor area of the sunken slab shall be measured shall measured and paid. Cost of vertical surface shall be included in the quoted rates.Make of Acrylic based polymer modified cementitious compound : Fosroc (Brushbond) /Sika (Sikatop-100) /Pidilite. |
| 17 | Supply only water proofing compound ISI marked complete all as specified and directed. |
| 18 | S&F in repair 100 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall, laid in trenches or in floors, complete all as specified and directed. |
| 19 | All as per item No. 18 here-in-before but 75 mm dia completed as specified & directed. |
| 20 | Fixing onlyin repair 100 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall, laid in trenches or in floors, after necessary cleaning complete all as specified and directed. |
| 21 | Fixing onlyin repair 75 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall, laid in trenches or in floors, after necessary cleaningcomplete all as specified and directed by Engr-in-charge. |
| 22 | S&F 100 mm cast iron bends completed all as specified & directed. |
| 23 | Allas per item No. 22 here-in-before but 75 mm dia completed all as specified & directed. |
| 24 | S&F Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100 mm dia complete all as specified and directed. |
| 25 | S& Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75 mm dia complete all as specified and directed. |
| 26 | S&F cast iron cowls 100 mm dia as in repairs complete all as specified & directed. |
| 27 | S&F cast iron cowls 75mm dia as in repairs complete all as specified & directed |
| 28 | S&F in repairs75 mm dia cast iron Floor Trap/Nahani Trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified & directed. |
| 29 | S&F in repairs100 mm dia cast iron Floor Trap/Nahani Trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified & directed. |
| 30 | Fixing only in repair100 mm cast iron bends/Tee/cowls after necessary cleaningcomplete all as specified & directed. |
| 31 | All as per item No. 30 here-in-before but 75 mm dia after necessary cleaning complete all as specified & directed |
| 32 | Supplying and laying of 15mm dia GI pipe medium grade includingfittings on walls/ceiling or laying in floors complete all as specified & directed. |
| 33 | Supplying and laying of 20mm dia GI pipemedium grade includingfittings on walls/ceiling or laying in floors complete all as specified & directed. |
| 34 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exc 10cm but not exc 20cm girth complete all as specified & directed. |
| 35 | M&L for Cutting holes into or through brick walls built in cement mortar or cement lime mortar having superficial area not exceed 150 Sqcm each, making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 complete all as specified & directed. |
| 36 | S&F in repair PVC (SWR) pipes 110mm dia Single socketed, in any length with rubber ring joints fixed to walls, laid in trenches, floors.etc complete all as specified and directed. |
| 37 | S&Fin repair for 110mm PVC (SWR) T equal and unequal complete all as specified & directed. |
| 38 | S&Fin repair for 110mm PVC (SWR) bends any radius complete all as specified & directed. |
| 39 | M&L for applying one coat of oil bound distemper on wall,white or tinted, including prepration of old surface complete all as specified and directed. |
| 40 | M&L for applying one coat of oil bound distemper on ceiling, white including prepration of old surface complete all as specified and directed. |
| 41 | M&L for complete removal /treatment of existing surfaces of wallall as specified and as directed. |
| 42 | M&L for applying 1-2 mm thick (average thickness) wall care putty on wall new or old surfaces including a coat of primer as reqd complete all as specified and directed. |
| 43 | M&L for applying two coat of oil bound distemper on wall ,white or tinted, including prepration of old surface complete all as specified and directed. |
| 44 | M&Lfor applying two coat of oil bound distemper on ceiling ,white or tinted, including prepration of new surface complete all as specified and directed. |
| 45 | M&L for preparation of old steel surfacesand applying one coat of syntheticenamel paint complete all as specified and directed. |
| 46 | M&L preparation of old woodensurfaces and applyingone coat of synthetic enamel paint complete all as specified and directed. |
| 47 | M&L for preparation of old surface of wall and applying two coat of white wash in staircase , garragecomplete all as specified and directed. |
| 48 | M&L for preparation of old surface of ceilingand applying one coat of white wash complete all as specified and directed. |
| 49 | M&L Preparation of new plastered surface of wall/ceiling surfaces and applying two coats of weather proof coat paint(exterior emulsion paint) over a coat ofcement primer complete all as specified and directed. |
| 50 | M&L Preparation of old plastered surface of wall/ceiling surfaces and applying two coats of weather proof coat paint(exterior emulsion) over a coat ofcement primer complete all as specified and directed. |
| 51 | M&L for , Glazed ceramic coloured tiles in vertical surface350X 250X 7mm/ 450X300X7mmthickas in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10 mm thick for wall finished in CM 1:4, including dismantaling floor hearth or wall tiling and cement mortar bedding ( but not backing ), removal of rubbish off the premises debrish away from site to a disignated point by local administration or a distance up to 1.5 km from site complete all as specified and directed by Engr-in-charge. |
| 52 | M&L for Non-skid Ceramic coloured tiles 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 thick screed bed in CM 1:6 and dismantling of existing tiles removal of rubbish off the premises debrish away from site to a disignated point by local administration or a distance up to 1.5 km from site complete all as specified and directed by Engr-in-charge. |
| 53 | M&Lmachine cutpre polished Kota stoneslab 18-20 mm thick (single slab) laid in step/ floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in grey cementslurry to match the shade of slab, cuttinggroves in stone, making nosing at edge and chipping of floor surfaceincluding demolition complete all as specifiedand directed by Eng-in-Charge. |
| 54 | M&Lmachine cut pre polished kota stone slab 18-20mm thick (single slab)in riser of steps, skirting, dado and pillarlaid over and including 10mm thick cement screedin CM 1:4 with neat cement slurry @ 3.00 kg/Square including pointing in grey cementslurry to match the shade of slab,chipping of wall surface etc including demolition complete all as specifiedand directed. |
| 55 | Material and labour for 18-20mm mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition complete all as specified and directed. |
| 56 | S&F in repairs vitreous china wash down water closet pan \"S\" Trap (pedestal pattern ) including connection to drain and flushing pipe antisyphonic pipes etc |
| 57 | S&F in repairs Plastic water closed seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device completed all as specified & directed. |
| 58 | S&F health faucet brass chromium plated with hook stand Roman 2 In 1 Faucet 1.5 mtr length complete all as directed . |
| 59 | S&FPVC syphonic action type flushing cistern 10 lts capacity ,low level with inlet ,ball valve float and bracket with complete fitting complete all as specified and directed . |
| 60 | S&F in repairs 15 mm brass chromium plated wall Mixer for Hot and Cold water screwed down for iron pipes for complete all as specified and directed. |
| 61 | S&F in repairs 15 mm brass chromium plated centre hole WHB mixer for mixing Hot and Cold water screwed down for iron pipes completed all as specified & directed. |
| 62 | S&F in repairs 15 mm brass chromium plated Sink mixer for mixing Hot and Cold water screwed down for iron pipes completed all as specified & directed. |
| 63 | S&F15 mm fancy type anglevalves cast copper alloyscrewed down high pressure with crutch both ends for iron pipes or for union and fixed completed all as specified & directed. |
| 64 | S&F 15 mmBib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore fixed in repair complete all as specified & directed |
| 65 | S&Fin repairsVitreous china wash hand basin ,flat back size 550 mm X 400 mmincluding Bracketcutting in walland pinning in ends of bracket orerecting stand with PCC 1:2:4 Type B1, including waste coupling and waste pipes completed all as specified & directed. |
| 66 | S&F sinkswith drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall orincludingfixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mml fixed in repairscomplete all as specified & directed & directed. |
| 67 | S&F in repairs Stainless steel plate rack (utensil rack) of size 900 mm x 900 mm and depth 250 mm made with 0.63 mm thick stainless steel sheet provided with brass screwes including necessary fittings ,nut/ bolts completed all as specified & directed. |
| 68 | S&F PVC connection 15 mm size with PTMT nuts of lengh 450 mm long completed all as specified & directed. |
| 69 | S&F in repairs Chromium plated shower roses swivel shower brass chromium platedwith arm 150 mm size for fixing with 15 mm pipes with swivel joints ,any size including fixing to steel pipes or union completed all as specified & directed |
| 70 | S & F with looking mirror(size- 300x450mm) fixed in repaircomplete all as specified and directed. |
| 71 | S&F Grating doom 125 mm dia with or without waste hole of PTMT fixed on floor/nahani trap with cement mortar, fixed in repairs complete. (Minimum weight 40 gms)complete all as specified and directed. |
| 72 | S&F PVC waste pipe 32mm dia, complete with 80 cm long flexible for WHB fixed in repairscomplete all as specified and directed. |
| 73 | All as per Item No. 72 here-in-before but 40mm dia for sink, complete all as specified and directed. |
| 74 | S&F Waste coupling of PTMT (half or full threaded) 32 mm bore (minimum weight 45 gms) fixed in repairscomplete all as specified and directed. |
| 75 | All as per Item No. 74 here-in-before but 40mm dia (minimum weight 60 gms) for Steel Sinkcomplete all as specified and directed. |
| 76 | S & F in repair rotational moulded polyethylene water storage tank (Cylindrical vertical with close top), HDPE, triple layeredwhite colour with ISI marked of 500 ltrs capacity with inlet & outlet connections, including 20mm dia PVC float valve with ball & all fittings, tank nipple with washer & plug , with tank lid having locking arrangement hoisted and fixed in position complete all as specified and directed including dismantling existing water storage tanks (RCC/PVC) of capacity upto 500 litre complete all as as specified & directed. |
| 77 | S&F in repairsGun-metal, globe or gate valves, with iron wheel head, 20 mm bore screwed both end for iron pipe , and fixed in repairs complete all as specified and directed. |
| 78 | M&L for disconnecting of PVC tank of capacity 500 Ltrs & upto 1000 Ltrs for tank cleaning all as specified and directed :-a) Dewatering & removing all settled silt, scale & dust from inside of tanks using coconut brush manually and applying bleaching powder and allowed to rest for 1 hour.b) Cleaning& rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins.c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tankd) Refixing the tank in same position or raised/lower height after cleaning or water proofing treatment (as may necessary) complete all as directed by engr-in-charge.Note : - Water proofing treatment, PCC bench,pipesif required to be replaced shall be measured and paid separately under relavent items. |
| 79 | S&Fin repairs Ball valves high pressure PTMT ISI marked, with epoxy coated alluminium rod and high density plastic ball screwed for iron pipe of 20mm bore (minimum weight 210gm) fixed in repair complete all as specified and directed. |
| 80 | Formwork to chullah hoods, chajjas,facia, troughs and similar, items in cluding edges,including stagging and scafolding up to 10 mtr heights,complete all as specified and directed by. |
| 81 | M&L for Reinforced cement concrete (Nominal mix)1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in chajjas, facia etc shelves and the like, at any height,complete all as specified and directed. |
| 82 | M&L for Mild steel TMTbars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 83 | M&L for Mild steel TMTbars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 84 | M&L extra over rendering or plastaring for work in isolated widths or in widths not forming part of general plastering such as in bands ,sunk panals, cornices, skirting ,drip moulds and similar workn exc 15 cm in width or girth : including cutting to edges ,all mitres and stopped ends etccomplete all as specified & directed. |
| 85 | Cutting holes through brick wall built in cement mortar, for inserting holdfasts, depth of embedded portion of holdfasts exceeding half brick thick but not exceeding one brick thick and making good the dismantled portion withPCC type B-0, (1:2:4) and cement mortar (1:3)to match the disturbed surface with existing finish, complete all as specified & directed. |
| 86 | M&L Factory made single extruded WPC (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice huck/ wheat huck ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire resisdant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction. (MS hold fast/lugs or SS dash fasteners shall be paid for seperately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra paymentshall be made on this account. |
| 87 | M&L Factory made single extruded WPC (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice huck/ wheat huck ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire resisdant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for seperately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra paymentshall be made acount. |
| 88 | M&L Factory made single extruded WPC (wood polymer composite) solid plain flush shutter of 30 mm sizecomprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice huck/ wheat huck ) and non toxic additives (maximum toxicity index of 12 for 100 gms)having minimum density of 650 kg/fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire resisdant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for seperately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 89 | M&L Factory made single extruded WPC (wood polymer composite) solid plain flush shutter of 35 mm sizecomprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice huck/ wheat huck ) and non toxic additives (maximum toxicity index of 12 for 100 gms)having minimum density of 650 kg/fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire resisdant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for seperately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made on this acount. |
| 90 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube in opening complete all as specified & directe. |
| 91 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M. S.frame shall be covered with heat moulded plain colour PVC ‘C’channel having a PVC sheet strip of 20 mm width stuck inside withsolvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail &bottom rail; paneling of plain colour PVC sheet to befitted in the M.S. frame welded/sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified & directed. |
| 92 | M&L for factory made 2nd class hardwood (Hollock) glazed & skeleton shutters, 35mm thick open rebated and prepared to receive wire cloth, glass, gauze etc. with , edges of framing plain chamfered or rounded, fitted with cut and metred beads ofr securing glass, gauze etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a), complete all as specified. NOTE : Wire gauge shutter should also have the provision of vertical member of size 100mm 35mm at middle of the shutter. |
| 93 | S&F Factory made box type steelwindow / ventilatorscomposite type with double rebated pressed steel frames 80 mm x 60mm (Peripherral) and 80x75mm (Intermediate members) made out of cold rolled 1.25mm thick sheet having steel window/vertilators shutter with sash bar of MS tubular section of size 50mm x 20mm x 1-1mm thickfixed with box type hinges including MS flat as inbeading for wire mesh shutter and glass oil putty with glazing pin for glazed shutter, and handle of 100mm size made out of Z section 01 No, MS stove enamelled black towerbolt of size 120mm 02 Nos, 150 mm mild steel hooks and eyes, each shutter flat iron 40mm x 1.25mm and 200mm long hold fasts 04 Nos each window including necessary filling hollow frame with PCC (1:3:6)& also cutting holes for inserting holdfasts, including making good disturbed surfaces to match with existing coloursurface and 10mm x 10 mm mild steel solid square bars in 100mm c/c horizontaly as grill fixed to window/ ventilators frame using necessary weldingcomplete all as specified & directed. |
| 94 | S&F in repairs18/19 mm thick Block board grade II quality interior grade commercialtype with decorative faceincluding fixing 18 mm wide 6 mm thick beading all around of 1st class HW (Teak) including touch wood paint two coats complete all as specified & directed. |
| 95 | M&L 0.9 mm Decorative lamination type 1 of surface finish ,coloured and pattern as approval fixed with approvaladhesive as per manufacture instruction all as specified and directed. |
| 96 | S&F 150 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed omplete all as specified. |
| 97 | S&F Mild steel pressed handles, oval type, stove enameled black 125 mm size fixedcomplete all as specified and directed.. |
| 98 | S & F mild steelbutt hinges medium weight, cold rolled100 mm , complete all as specified. |
| 99 | S&F 125 mm size hasp and staple safety type aluminium anodized complete all as specified & directed. |
| 100 | S&Fin repairs 300 mm SS sliding door bolts, plate type stove enameled black, with bright, bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate fixed in repaircomplete all as specified and directed. |
| 101 | S&F in repair sheet glass ordinary quality and glazing with oil putty in squares n exc. 0.5 Sqm in each pane, thickness in 5 mm complete incl hacking out all as specified & directed. |
| 102 | S&Fin repair 5 mm thick Figured Glasspinhead , glazing with oil putty in square not exceeding 0.5 Sqm in each pane incl hacking outcomplete all as specified and directed . |
| 103 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples and fixed with tinned tacks or galvanized wire staples complete all as specified & directed. |
| 104 | S&F 300 mm mild steel ordinary rat tail rod pattern sorings, including roller & roller plate complete all as specified directed. |
| 105 | S&F Floor door stopper of Aluminium alloy body anodised with hard drawn steel spring 140mm size fixed in floor complete all as specified directed. |
| 106 | S&F in repairs of Drapery rod/ curtain rod 25 mm diameter, stainless steel ( 304 grade) of thickness 20 gauge with standard type socket including brackets, side , doms, wall to wall,finel ,rings complete all as specified & directed. |
| 107 | S&F Aluminium powder coated door seal strip 900mm long with glass wool fixed with steel screws at bottom rail of external door complete all as specified directed. |
| 108 | Cleaning of plants, bushes, peeple plants of building, if required and make good the surface in cement mortar (1:3) and applying one coat of anti growth of vegitation chemical as directed by Engr-in-Charge and removing of unserviceable material out side MD land and cleaning site complete all as specified and directed. |
| 109 | M&L for 40 mm thickCement concrete type B- 1, 1:2:4 (20mm graded crushed stone aggregate) as in flooring complete all as specified and directed by Engr-in-Charge. |
| 110 | M&L for 28 mm Wide Plastic dividing strips, 1.5mm thick, inserted in position, conform to design, complete all as specified. |
| 111 | M&L for PCC (1:4:8) type D-2 (40mm gradedcrushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engr-in-charge. |
| 112 | M&L spike rolling to surface or making impressions of expanded metal ,whilst the concrete is green complete all as specified and directed. |
| 113 | Removal of Debris /demolished material out of MOD land upto 10KM from the starting point of collection complete all as specified. |
| 114 | Taking down carefully of point wiring (Light , fan, socket or powercomplete fittings such as switches,Ceiling roses, pendants, regulator, sockets, Bell push) removing from site of work and making good to the disturbed surfaces of walls/floors etc complete all as specified and directed.NOTE :- Taking down of Light fitting, MCB, DB etc to be measured and paid separately. |
| 115 | Taking down carefully by submain wiring/service connection of any complete all as specified & directed. |
| 116 | Taking down carefully DB boxof any sizes &capacity complete all as specified and directed. |
| 117 | M&L for Concealed Point wiring using stranded copper conductor FRLS cable of size 1.5Sqmm, PVC insulated Unsheathed complete in & including non metallic rigid UPVC concealed conduit ,medium grade including all fittings and accessories, using GI Sheet modularterminal boxes with Modular inner frame and outer cover plate of suitable size for mounting of modular switches, sockets, fan regulators etc fastened with chromium plated screws and 1.5 sqmm PVC insulated stranded copper conductor FRLS cable as continues earth wire connected to common earth dolly complete including making good disturbed surface (i.e plastering ,one coat of putti and two coates of Apex paint ) complete all as specified and directed . |
| 118 | All asper Srl item No. 117.00 here-in-before, but One light/fan point controlled by one switch |
| 119 | All asper Srl item No. 117.00 here-in-before, but One 3-pin socket outlet 5 Amp on independent board. |
| 120 | All asper Srl item No. 117.00 here-in-before, but One 3 pin socket outlet 5 Amp on same board |
| 121 | All asper Srl item No. 117.00 here-in-before, but One light point controlled by 2, two switches |
| 122 | All asper Srl item No. 117.00 here-in-before, but One bell point controlled by one switch |
| 123 | All asper Srl item No. 117.00 here-in-before, but 2.5 Sqmm copperconductor cable and 2.5 sqmm PVC insulated standard copper conductor complete FRLS cable as continuous earth wire all as specified for One 3 pin socket outlet 15 Amp on independent board. |
| 124 | M&L for Sub main wiringwith two single core PVC insulated unsheathed stranded copper conductor FRLS cable 6 Sqmmand including UPVC conduit 25mm dia with all fittingsmedium grade ISI Marked and PVCinsulated FRLS copperconductor cable of size 6 sq mm as earth wire, connected to common earth dolly and all metal part/main switch including making good disturbed surface (i.e plastering ,one coat of putti and two coates of Apex paint ) complete all as specified and directed . all as specified and directed. NOTE :- Two runs of single core PVC insulated standarad copper conductor and one run of earth wire and one run of UPVC conduit shall be measured as one unit. |
| 125 | M&L for Sub main wiringwith two single core PVC insulated unsheathed stranded copper conductor FRLS cable 4 Sqmmand including UPVC conduit 25mm dia with all fittingsmedium grade ISI Marked and PVCinsulated FRLS copperconductor cable of size 4 sq mm as earth wire, connected to common earth dolly and all metal part/main switch including making good disturbed surface (i.e plastering ,one coat of putti and two coates of Apex paint ) complete all as specified and directed . all as specified and directed. NOTE :- Two runs of single core PVC insulated standarad copper conductor and one run of earth wire and one run of UPVC conduit shall be measured as one unit. |
| 126 | S&F in replacement of modular switch, 1 module single pole one way 6 Amp complete all as specified & directed. |
| 127 | S&F in replacement ofmodular switch, 1 module single pole one way 16 Amp complete all as specified & directed. |
| 128 | S&F in replacement ofmodular switch, 1 module single pole two way 6 Amp complete all as specified & directed. |
| 129 | S&F in replacement of modular Bell push , 1 module6 amp single pole one way complete all as specified & directed. |
| 130 | S&F in replacement of Socket outlet 3 pin 6 amp multipurpose, modular type, 2 module completeall as specified & directed. |
| 131 | S&F in replacement of Socket outlet 3 pin 6/16 Amp multipurpose, modular type, 2 module 240 volt complete all as specified & directed. |
| 132 | Supply and fixing in replacementMCB protected modular socket with Modular MCB 16 Ampsbuilt in MCB+ Socket 16 Ampswith concealed metal sheetsteel enclosure( same as per socket make ) with inner mounting frame and outer modular cover for mounting complete including making good disturbed surface (i.e plastering ,one coat of putti and two coates of Apex paint ) complete all as specified and directed . all as specified and directed. |
| 133 | S&F in replacement of Ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete all as specified & directed . |
| 134 | S&F in replacement of Bell ding dong, Type AC 230 volts, 50Hz, Single Phase , complete all as specified & directed. |
| 135 | Supply and fixing in replacement MCB double pole 40 Amp, 240V, 10KA, \"C\" integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, with efficient air chanels etc complete all as specified. |
| 136 | Supply and fixing in replacement MCB Single pole6 to 32Amp, 240V, 10KA, \"C\" integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, with efficient air chanels etc complete all as specified. |
| 137 | Supply and fixing in replacementMCB DB Single pole and neutral8 way,concealed in wall, sheet steel phospehtised powder painted withIP 43 protection 240 V neutral link, earth bar and Din rail double doorincluding making good disturbed surface (i.e plastering ,one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed . |
| 138 | Supply and fixing in replacement ofwall mounted fittings with ABS housing and clear polycarbonate cover including retrofit LED bulb 09 watt conforming to city-1/city-2 including making connection withflexible copper 3 core cable 0.5Sqmm from connector/ ceiling rose to fitting complete all as specified and directed. |
| 139 | S&F in replacement ofLED batten fourfeet ,1200 mm length ,polycarbonate body ,20 Watt,100 Lumen/watt ,Total Lumen 2000 ,coolday light fixed on wall including cord cable 0.50 Sqmm 2 core upto 300 mm lengthall as specified and directed. |
| 140 | S&F in replacement ofLED batten Two feet ,600 mm length ,polycarbonate body ,10 Watt,100 Lumen/watt ,Total Lumen 1000 ,coolday light fixed on wall including cord cable 0.25 Sqmm 2 core upto 300 mm lengthall as specified and directed. |
| 141 | S&F in replacement ofLED Bulk head Luminaire made of pressure die cast aluminium hosing withprotected diffuser10 watt system wattage, colour temp 6500K, Lumen efficacy 100 lumen/watt, Total Lumens output 1000, PF >0.9 complete all as specified and directed. |
| 142 | S&F in replacement ofLED batten onefeet, 300 mm length, polycarbonate body, 5 Watt,100 Lumen/watt, Total Lumen 500, cool day light fixed on wall including cord cable 0.25 Sqmm 2 core upto 300 mm lengthall as specified and directed. |
| 143 | S&F in replacement ofLED building security light fitting 30W powder coated, pressure die cast aluminium body and polycarbonate cover with individual LED lense having colour temperature 6500 +/- 500, PF >0.90 having system efficiency 2400 lumen with factory manufactured GI bracket, clamps all accessories such as connection, nut and bolt etc, complete all as specified and directed. |
| 144 | Supply and fix Exhaust fan 250 mm sweep at outer wall, 270 CMH, 40W, 1800 RPM, ABS plastic Body along with inbuilt PVC louvers (same make as Exhaust fan) PVC detachable mesh net at inner wall complete suitable to work on AC, single phase, 230 Volts, 1100 RPM, 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm upto 1 metre including making square hole and making good disturbed surface i.e plastering, one coat of putti and two coats of old bound distemper paint with matching existing surface) complete all as specified and directed. |
| 145 | Taking down the ceiling fanincluding down rod of any sweep carefully from its installed position, dismantling complete for repair & servicing, greasing / oilingand spray painting of fanscomplete,upper and lower canopy,fan boxcover and hanging / refixing in position after civil work with suitable down rod upto 3 feet complete all as directed. |
| 146 | Note :-Amount of credit ofRs. 47751.00for retrieved materials is mentioned in Schedule of Creditof tender documents in pdf form which will be deducted offline while acceptance of tender. |
