|
| 1 | EARTH WORK IN FOUNDATION TRENCHES:Excavation work by mechanical means (Hydraulic Excavator) manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 2 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual). |
| 3 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:2:4 mix. (1cement, 2coarse sand, 4 graded stone aggregate of 20mm & down size). |
| 4 | Supplying, bending and placing in position tor- steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 5 | Supplying, bending and placing in position mild steel (6mmdia.) including straightening, cutting, bending and placing in position including binding wire complete. |
| 6 | Centering and Shuttering including strutting, proping etc. and removal of form work for: Lintels, Beam, Plinth Beam, Girders, Bressumers and Cantilever. |
| 7 | Centering and Shuttering including strutting, proping etc. and removal of form work for: Foundation, Footing, Bases of Column etc. for mass concrete. |
| 8 | Centering and Shuttering including strutting, proping etc. and removal of form work for: Column, Pillars, Piers, Abutments, Post & Struts. |
| 9 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge). |
| 10 | Providing and Laying first class brick work in one brick thick in superstructure of standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge including curing etc all complete. |
| 11 | Providing and laying first class brick work in half brick thick in super structure of standardsize bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks upto work site, curing etc all complete. |
| 12 | Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete.1:4 Mix |
| 13 | Providing and fixing frame work for partitions/wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 600 mm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge. |
| 14 | Providing and fixing in wall lining medium density fibre board IS:14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 18 mm thick. |
| 15 | Providing & fixing in position high density fiber laminated wood in wall skirting with planks of sizes 12mm thick, 2286 mm length (minimum) and 60mm wide(minimum), in approved colour, texture and finish having Performance Appraisal Certificate (PAC) conforming to EN 13329 standard issued by Manufacturer.The skirting shall be fixed with SS screws & rawl plugs, over prepared surface. The wood planks shall have minimum density of 850 Kg/cum with Eco friendly UV coating, all complete as per direction of thengineer in‐charge. |
| 16 | Providing and fixing to existing door shutter 30 mm thick Glass Fibre Reinforced Polyester (FRP) Flush door shutter of required colour and approved brand and manufacture, made with fireretardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, cast monolithically with testing parameters of F.R.P. laminate conforming to table ‐ 3 of IS:14856:2000 complete as per direction of Engineer‐in‐charge of seasoned wood inside at required placed for fixing and fittings. |
| 17 | Providing and fixing M.S. pressed bright finished butt hinges with necessary screws etc. complete., 125x31x4mm. |
| 18 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete, Brass (Chromium Plated). |
| 19 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete, Brass (Chromium Plated). |
| 20 | Providing and fixing Tower bolt 150x10mm with necessary screws etc complete, Brass (Chromium Plated) |
| 21 | 35 mm thick factory made solid panel PVC door shutter, made out of single piece extruded solid PVC profile, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mm x 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm x 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent, self driven self tapping screws & MS rectangular pipes bracket of size 190 mm x 100 mm of cross section size 35 mm x 17 mm x 1 mm at each coener. Single piece extruded 5 mm thick solid PVC lock rail pf size 115 mm x 35 mm, outb of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel,all complete as per manufacture\"s specification and direction of Engineer-in-Charge. Decorative finish (wood grained finish). |
| 22 | Renewing glass panes, with putty & nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm). |
| 23 | Providing and Laying vitrified floor tiles in different sizes (thickness to be specified by the manufactured) with water absorption less than 0.08% and confirming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse Sand), joining with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. complete. Size of Tile 600x600 mm. |
| 24 | Providing and Laying vitrified floor tiles in different sizes (thickness to be specified by the manufactured) with water absorption less than 0.08% and confirming to IS:15622, of approved make, in all colours and shades, in skirting, riser of stepss over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse Sand), joining with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. complete. Size of Tile 600x600 mm. |
| 25 | Providing and Laying white or colored glazed tiles anti skid (elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 26 | Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm luster printed (loreno, bronzo,colubia or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 27 | Providing and Laying 25 mm thick kota stone slab flooring over 20 mm thick 1:4 cm base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete. |
| 28 | Providing and Laying kota stone slabs 25 mm thick in Risers of steps, skirting dado and walls laid on 12 mm thick (average) thick base of c.m. 1:3 (1cement, 3 coarse sand) and jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting, rubbing and polishing complete. |
| 29 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 30 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 31 | Providing, fitting, fixing of 24 BWG Pre‐painted HULAS sheet roofing with lapping of 150mm (two corrugation) with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete |
| 32 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level uspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash asteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. (i) With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. |
| 33 | Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with : Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322. |
| 34 | Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete: |
| 35 | Providing and painting with ready mixed Enamel paints of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface. |
| 36 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc. and sand papering and filling the scratches complete on New surface. |
| 37 | Providing and distempering with oil bond washable acrylic distemper on old surface of approved brand and manufacture to give aneven shade including preparation of surface etccomplete. |
| 38 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete:100 mm dia. PRINCE / SUPREME or equivalent soil pipe |
| 39 | Providing, fitting and fixing bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes:100 mm dia. Supreme / Prince. |
| 40 | Providing, fitting and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete:100 x 100 x 100 x 100 mm Supreme / Prince. |
| 41 | Providing, fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 440x315x325 mm with 5ltr automatic flushing cistern with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps including cutting and making good the walls and floors as required all complete: Range of 1 Urinal basin. |
| 42 | Providing, fitting and fixing white vitreous white china wash flat back basin with CI brackets, painted, 15 mm CP brass pillar taps, CP brass chain with rubber plug, 32 mm CP brass waste pipe, lead or PVC connection 32 mm dia CP brass cap andunions, complete including cutting and making good the walls wherever required. HINDWARE. One wash basin with one pillar cock. (63 cm x 45 cm). |
| 43 | Providing and Fitting Pedestal white colour for of Hind Vitreous wash basin complete. |
| 44 | P/Fstainless steel kitchen sink with CIbrackets,CP brass chain with rubber plug 40 mm CP brass waste, CP brass tap etc. complete i/c the fittings, cuttings and making good the wall wherever required. 610 x 450 x 200 mm. |
| 45 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) BIB COCK LONG BODY 15 MM DIA. |
| 46 | Providing and fixing of 12 mm thick and 100 mm wide pelmetswith (25 mm dia.) curtain\" rods and brackets including fixingwith (25x3) mm M.S. flat 10 cm long and plugs etc.complete inchamp timber or equivalent with necessary screws/nails. |
| 47 | Providing and Laying Plum concrete in1:2:4 c.c. (1cement, 2 coarse sand, 4 clean hard graded stone chips of 20 mm down nominal gauge) with 70% clean hard stone of sizes not exceeding15 cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge. |
| 48 | Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete. |
| 49 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.: With 12 mm mild steel U beading. |
| 50 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 530x410 mm with integral type foot rests |
| 51 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European Bidets standard CAT NO 30001 |
| 52 | Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 53 | Providing, Fitting and fixing GI pipe of medium class, (excluding trenching, refilling, compacting and the cost of fittings) all complete.(15 mm dia G I pipe). |
| 54 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent) 500 LITERS CAPACITY |
| 55 | Providing and Providing and painting on G.S.sheet one or more coats with ready mixed paint to give an even shade including cleaning of surface of dust etc complete on old surface. |
| 56 | Printing new letter and figures of any shade (Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade): English and Roman. |
| 57 | Loading and unloading of stone boulder/stone/aggregates/sand/ kanker/moorum. |
| 58 | Loading and Unloading of Cement or Steel by Manual Means and stacking. |
| 59 | Cost of haulage excluding loading and unloading- Surfaced road:-Non-stock & stock materials |
