|
Emergency Work Supply installation testing and commissioning Of Hmsm Pump Sets With Electro Mechanical Accessories And Equipment Etc. Complete With 05 Months Comprehensive Operation & Maintenance & Security Work & Dismentling Work Of Machinery At Ghodadhroi Hw Under Mmj Rwss.-1 Supply of Horizontal mono submersible pump set of Cat SM-3.2 Monoset sub. pump 3 phase 400/440 vott, 50 c/s. A.C. Supply & 2900 RPM , as per IS 14220 along with sand guard & cable (05 mtr length) etc. complete unit as per detailed technical specifications & MOC : Casing: CI-FG260, Impeller : Bronze & Shaft : SS:410 of following capacity @ 2900 RPM(1000 lpm,24 mtr head) 2 Lowering/lying of openwell Horizontal Submersible pump sets/bore well pump sets with necessary tools and as per instruction of engineer-in-charge. 3 Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of 1x 3.5 Core x 185 Sqmm sizes (GEB meter to MCCB to Junction box) 4 S.I.T.C. of Approved make four pole MCCB having breaking capacity ICU of 50 KA 415 V having normal current rating 400 A with variable Thermal and magnetic release suitable to work on AC Supply 50 C/s with all internal connection spreader tinned copper and complete with suitable size enclosure erected in 16 GMS Housing on angle frame or as per site requirement. (Cat.-III) (ICs 100% of ICU only Cat.-III) 5 Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 G.M.S. sheet,dust&vermin proof having hinged door with rubber gasket and necessary busbar supports with Aluminium busbar having current density not more than 0.8 Amp. / sq.mm (Rated current /crosssectionarea)dulywrappedwith colour insulation tape for phase sequence, three phase & neutral each Suitable for following current capacity with necessary paintingmountedonwall orpedestal frameof required size with necessary connections. Suitable for 300 Amp. capacity 6 Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench / cable trays /dam/ conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1)including all accessories of 1x 4 Core x 10 Sqmm sizes( Junction box to Panel) 7 Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench / cable trays /dam/ conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1)including all accessories of 1x 3 Core x 6 Sqmm sizes( Panel to Pumpset) 8 Supply OF 11 to 15 HP Star Delta starter suitable for local & remote pump control application consisting of MPCB, overload relay and contactors as per Type II coordination including digital voltmeter, analogue ammeter with selector switch, run hour meter, required protective relays & control accessories.This item also includes APP type suitable rating capacitor as per GWSSB rate contract specifications. 9 Installation and testing of Above mentioned 11 to 15 HP Star Delta starter with necessary fixtures materials 10 Manufacture, supply, delivery and instalation of ISI Marked H.D.P.E. Pipes (IS: 4984/1985 with latest amendment) having pressure rating PN-10 and material grade PE 80 in approximate 100 meter coil length or as per GWSSB requirement with SS- 316 Nipple at both end with SS Nut Bolt having 11 TPI threading as per specifications press fitted and bolted. having 110 mm nominal diameter as per detailes techanical specifications. 11 Installation and testing of Above mentioned 110 mm dis HDPE pipe with necessary fixtures materials 12 Supply at Site, Storage, Erection, Installation, Testing & Commissioning of Flanges, Concentric Nozzles Bolts, Nuts, and Connection Flanges, Eccentric Nozzles, etc. Complete. As per relavant IS and requirement. for 110 mmØ individual Delivery piping (HDPE) and Fabrication of ms frame structure for Pumpset as per site requirement with supply of necessary required MS materials 13 Supply of Manpower for the operation, repair and maintenance and security of the machinery and accessories and for the movement of the pumpset and accessories if necessary according to the level of the water in dam as per instructions of the Engineer-in-charge.considering 9 manpower supplied. 14 Dismantling of pump motorset,cable, panel,pipe &other accessories etc.component & loading in vehicle transportation to Departmental store and unloading at store and proper stacking including hydro,labour etc complete 15 Hiring of Hydra/Crane including Driver & diesel etc. complete. 16 Hiring of Tractor with trolley considering 8 hrs as working day hours including Driver etc. complete. 17 Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with shoring and struting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified.(A) Upto 1.50 mt depth A.In all sorts of soil and so murrum 18 Providing and Constuction cofferdam in river basin including excavation,filling, middle portion with B.C.soil(in empty Cement/Gunny Bags) to the entire satisfaction of EIC till completion of the work including dismantling coffer dam after completion of the work as directed by EIC. (Bags Filled With sand brought from Outside)
|