Indian Tenders

Tender Notice
TDR 53690301
Tendering Authority Uranium Corporation Of India Limited
Tender No TMPL/RC/BONIFIGLOLI GEAR BOXES SPARES/383
Tender ID 2026_UCIL_264479_1
Tender Brief Corrigendum : Tender For Supply Of Bonifigloli Gear Box Spares , Model-1: Model: As55 Df P112, Code: 1900000950717270002, Batch:6/19, V1, I:33:2, Application : I) Neutralization Tank Agitator Ii) Precipitation Tanks In Chemical House Iii) Causticization Tanks , Ca
City Cuddapath
State Andhra Pradesh
Document Fees Refer document
EMD INR 10000.0 /-
Tender Value Refer document
Tender Type Tender
Bidding Type Open Tender
Competition Type Indian

Tender Details

Supply Of Bonifigloli Gear Box Spares , Model-1: Model: As55 Df P112, Code: 1900000950717270002, Batch:6/19, V1, I:33:2, Application : I) Neutralization Tank Agitator Ii) Precipitation Tanks In Chemical House Iii) Causticization Tanks , Casing With Flange (Part No. 2) For Model-1 , Cover (Part No. 3) For Model-1 , Internal Support (Part No. 4) For Model-1 , Gasket (Part No. 5) For Model-1 , Gasket (Part No. 6) For Model-1 , Extended 1St Reduced Pinion (Part No. 7) For Model-1 , Bored 1St Reduced Pinion (Part No. 8) For Model-1 , Gear Wheel 1St Reduction (Part No. 9) For Model-1 , Gear Wheel 2Nd Reduction (Part No. 10) For Model-1 , Pinion 3Rd Reduction (Part No. 11) For Model-1 , Gear Wheel (Part No. 12) For Model-1 , Cap (Part No. 13) For Model-1 , Bored Input Shaft (Part No. 14) For Model-1 , Oil Seal (Part No. 15) For Model-1 , Oil Seal (Part No. 16) For Model-1 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-1 , Bearing (Part No. 21) For Model-1 , Bearing (Part No. 22) For Model-1 , Bearing (Part No. 23) For Model-1 , Bearing (Part No. 24) For Model-1 , Key (Part No. 25) For Model-1 , Key (Part No. 26) For Model-1 , Key (Part No. 27) For Model-1 , Key (Part No. 28) For Model-1 , Key (Part No. 29) For Model-1 , Level Plug (Part No. 30) For Model-1 , Drain Plug (Part No. 31) For Model-1 , Breather Plug (Part No. 32) For Model-1 , Parallel Pin (Part No. 33) For Model-1 , Parallel Pin (Part No. 34) For Model-1 , Hex Head Screw (Part No. 35) For Model-1 , Hex Head Screw (Part No. 36) For Model-1 , Hex Head Screw (Part No. 37) For Model-1 , Circlip (Part No. 38) For Model-1 , Circlip (Part No. 41) For Model-1 , Circlip (Part No. 42) For Model-1 , 2 Nd Reduction Pinioin (Part No. 45) For Model-1 , Out Put Shaft (Part No. 47) For Model-1 , Spacer Ring (Part No. 48) For Model-1 , Circlip (Part No. 58) For Model-1 , Circlip (Part No. 39) For Model-1 , Extended Input Shaft (Part No. 50) For Model-1 , Key (Part No. 51) For Model-1 , Input Assembly , Output Assembly , Model-2: As60 Df P112, Code: I 11799930001,Batch:4/10, V1, I:37:1, Application : Feed Tank Agitator - Ssr , Casing With Flange (Part No. 2) For Model-2 , Cover (Part No. 3) For Model-2 , Internal Support (Part No. 4) For Model-2 , Gasket (Part No. 5) For Model-2 , Gasket (Part No. 6) For Model-2 , Extended 1St Reduced Pinion (Part No. 7) For Model-2 , Bored 1St Reduced Pinion (Part No. 8) For Model-2 , Gear Wheel 1St Reduction (Part No. 9) For Model-2 , Gear Wheel 2Nd Reduction (Part No. 10) For Model-2 , Pinion 3Rd Reduction (Part No. 11) For Model-2 , Gear Wheel (Part No. 12) For Model-2 , Cap (Part No. 13) For Model-2 , Bored Input Shaft (Part No. 14) For Model-2 , Oil Seal (Part No. 15) For Model-2 , Oil Seal (Part No. 16) For Model-2 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-2 , Bearing (Part No. 21) For Model-2 , Bearing (Part No. 22) For Model-2 , Bearing (Part No. 23) For Model-2 , Bearing (Part No. 24) For Model-2 , Key (Part No. 25) For Model-2 , Key (Part No. 26) For Model-2 , Key (Part No. 27) For Model-2 , Key (Part No. 28) For Model-2 , Key (Part No. 29) For Model-2 , Level Plug (Part No. 30) For Model-2 , Drain Plug (Part No. 31) For Model-2 , Breather Plug (Part No. 32) For Model-2 , Parallel Pin (Part No. 33) For Model-2 , Parallel Pin (Part No. 34) For Model-2 , Hex Head Screw (Part No. 35) For Model-2 , Hex Head Screw (Part No. 36) For Model-2 , Hex Head Screw (Part No. 37) For Model-2 , Circlip (Part No. 38) For Model-2 , Circlip (Part No. 41) For Model-2 , Circlip (Part No. 42) For Model-2 , 2 Nd Reduction Pinioin (Part No. 45) For Model-2 , Circlip (Part No. 58) For Model-2 , Circlip (Part No. 39) For Model-2 , Extended Input Shaft (Part No. 50) For Model-2 , Key (Part No. 51)For Model-2 , Spacer Ring (Part No. 46) For Model-2 , Out Put Shaft (Part No. 49) For Model-2 , Circlip (Part No. 57) For Model-2 , Input Assembly , Output Assembly , Model-3: As60 Df P132, Code:I11800030001, Batch:4/10, V1, I:33:4,Application : I) Filtrate Tank Agitator - Ssr & Ii) Gsm Tank - Ssr Iii) Clarifier Underflow Tank , Casing With Flange (Part No. 2) For Model-3 , Cover (Part No. 3) For Model-3 , Internal Support (Part No. 4) For Model-3 , Gasket (Part No. 5) For Model-3 , Gasket (Part No. 6) For Model-3 , Extended 1St Reduced Pinion (Part No. 7) For Model-3 , Bored 1St Reduced Pinion (Part No. 8) For Model-3 , Gear Wheel 1St Reduction (Part No. 9) For Model-3 , Gear Wheel 2Nd Reduction (Part No. 10) For Model-3 , Pinion 3Rd Reduction (Part No. 11) For Model-3 , Gear Wheel (Part No. 12) For Model-3 , Cap (Part No. 13) For Model-3 , Bored Input Shaft (Part No. 14) For Model-3 , Oil Seal (Part No. 15) For Model-3 , Oil Seal (Part No. 16) For Model-3 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-3 , Bearing (Part No. 21) For Model-3 , Bearing (Part No. 22) For Model-3 , Bearing (Part No. 23) For Model-3 , Bearing (Part No. 24) For Model-3 , Key (Part No. 25) For Model-3 , Key (Part No. 26) For Model-3 , Key (Part No. 27) For Model-3 , Key (Part No. 28) For Model-3 , Key (Part No. 29) For Model-3 , Level Plug (Part No. 30) For Model-3 , Drain Plug (Part No. 31) For Model-3 , Breather Plug (Part No. 32) For Model-3 , Parallel Pin (Part No. 33) For Model-3 , Parallel Pin (Part No. 34) For Model-3 , Hex Head Screw (Part No. 35) For Model-3 , Hex Head Screw (Part No. 36) For Model-3 , Hex Head Screw (Part No. 37) For Model-3 , Circlip (Part No. 38) For Model-3 , Circlip (Part No. 41) For Model-3 , Circlip (Part No. 42) For Model-3 , 2 Nd Reduction Pinioin (Part No. 45) For Model-3 , Circlip (Part No. 58) For Model-3 , Circlip (Part No. 39) For Model-3 , Extended Input Shaft (Part No. 50) For Model-3 , Key (Part No. 51) For Model-3 , Spacer Ring (Part No. 46) For Model-3 , Out Put Shaft (Part No. 49) For Model-3 , Circlip (Part No. 57) For Model-3 , Input Assembly , Output Assembly , Model-4: As60 Df P132 V1, Code: I 11520980002, I: 25.47, Application : Dirty Wash Water Tank , Casing With Flange (Part No. 2) For Model-4 , Cover (Part No. 3) For Model-4 , Internal Support (Part No. 4) For Model-4 , Gasket (Part No. 5) For Model-4 , Gasket (Part No. 6) For Model-4 , Extended 1St Reduced Pinion (Part No. 7) For Model-4 , Bored 1St Reduced Pinion (Part No. 8) For Model-4 , Gear Wheel 1St Reduction (Part No. 9) For Model-4 , Gear Wheel 2Nd Reduction (Part No. 10) For Model-4 , Pinion 3Rd Reduction (Part No. 11) For Model-4 , Gear Wheel (Part No. 12) For Model-4 , Cap (Part No. 13) For Model-4 , Bored Input Shaft (Part No. 14) For Model-4 , Oil Seal (Part No. 15) For Model-4 , Oil Seal (Part No. 16) For Model-4 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-4 , Bearing (Part No. 21) For Model-4 , Bearing (Part No. 22) For Model-4 , Bearing (Part No. 23) For Model-4 , Bearing (Part No. 24) For Model-4 , Key (Part No. 25) For Model-4 , Key (Part No. 26) For Model-4 , Key (Part No. 27) For Model-4 , Key (Part No. 28) For Model-4 , Key (Part No. 29) For Model-4 , Level Plug (Part No. 30) For Model-4 , Drain Plug (Part No. 31) For Model-4 , Breather Plug (Part No. 32) For Model-4 , Parallel Pin (Part No. 33) For Model-4 , Parallel Pin (Part No. 34) For Model-4 , Hex Head Screw (Part No. 35) For Model-4 , Hex Head Screw (Part No. 36) For Model-4 , Hex Head Screw (Part No. 37) For Model-4 , Circlip (Part No. 38) For Model-4 , Circlip (Part No. 41) For Model-4 , Circlip (Part No. 42) For Model-4 , 2 Nd Reduction Pinioin (Part No. 45) For Model-4 , Circlip (Part No. 58) For Model-4 , Circlip (Part No. 39) For Model-4 , Extended Input Shaft (Part No. 50) For Model-4 , Key (Part No. 51) For Model-4 , Spacer Ring (Part No. 46) For Model-4 , Out Put Shaft (Part No. 49) For Model-4 , Circlip (Part No. 57) For Model-4 , Input Assembly , Output Assembly , Model-5: As80 Df P160, Code:I11837100001,Batch:5/10, V1, I:31:2 & Application : Crystalizer Tank Agtitator , Casing With Flange (Part No. 2) For Model-5 , Cover (Part No. 3) For Model-5 , Internal Support (Part No. 4) For Model-5 , Gasket (Part No. 5) For Model-5 , Gasket (Part No. 6) For Model-5 , Extended 1St Reduced Pinion (Part No. 7) For Model-5 , Bored 1St Reduced Pinion (Part No. 8) For Model-5 , Gear Wheel 1St Reduction (Part No. 9) For Model-5 , Gear Wheel 2Nd Reduction (Part No. 10) For Model-5 , Pinion 3Rd Reduction (Part No. 11) For Model-5 , Gear Wheel (Part No. 12) For Model-5 , Cap (Part No. 13) For Model-5 , Bored Input Shaft (Part No. 14) For Model-5 , Oil Seal (Part No. 15) For Model-5 , Oil Seal (Part No. 16) For Model-5 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-5 , Bearing (Part No. 21) For Model-5 , Bearing (Part No. 22) For Model-5 , Bearing (Part No. 23) For Model-5 , Bearing (Part No. 24) For Model-5 , Key (Part No. 25) For Model-5 , Key (Part No. 26) For Model-5 , Key (Part No. 27) For Model-5 , Key (Part No. 28) For Model-5 , Key (Part No. 29) For Model-5 , Level Plug (Part No. 30) For Model-5 , Drain Plug (Part No. 31) For Model-5 , Breather Plug (Part No. 32) For Model-5 , Parallel Pin (Part No. 33) For Model-5 , Parallel Pin (Part No. 34) For Model-5 , Hex Head Screw (Part No. 35) For Model-5 , Hex Head Screw (Part No. 36) For Model-5 , Hex Head Screw (Part No. 37) For Model-5 , Circlip (Part No. 38) For Model-5 , Circlip (Part No. 41) For Model-5 , Circlip (Part No. 42) For Model-5 , 2 Nd Reduction Pinioin (Part No. 45) For Model-5 , Circlip (Part No. 58) For Model-5 , Circlip (Part No. 39) For Model-5 , Extended Input Shaft (Part No. 50) For Model-5 , Key (Part No. 51) For Model-5 , Spacer Ring (Part No. 46) For Model-5 , Circlip (Part No. 40) For Model-5 , Out Put Shaft (Part No. 49) For Model-5 , Circlip (Part No. 57) For Model-5 , Spacer Ring (Part No. 59) For Model-5 , Circlip (Part No. 39) For Model-5 , Input Assembly , Output Assembly , Model:6 As55 F P100, Code: I11825510001 / 2, Batch:5/10, V1, I: 25:84,Application : Mother Liquor Tank Agitator -Ssr , Casing With Flange (Part No. 2) For Model-6 , Cover (Part No. 3) For Model-6 , Cap (Part No. 5) For Model-6 , Internal Support (Part No. 4) For Model-6 , Gasket (Part No. 6) For Model-6 , Gasket (Part No. 7) For Model-6 , Extended 1St Reduced Pinion (Part No. 8) For Model-6 , Bored 1St Reduced Pinion (Part No. 9) For Model-6 , Gear Wheel 1St Reduction (Part No. 10) For Model-6 , Pinion 2Nd Reduction (Part No. 11) For Model-6 , Gear Wheel, 2Nd Reduction (Part No. 12) For Model-6 , Bored Input Shaft (Part No. 13) For Model-6 , Extended Input Shaft (Part No. 14) For Model-6 , Oil Seal (Part No. 15) For Model-6 , Oil Seal (Part No. 16) For Model-6 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-6 , Bearing (Part No. 21) For Model-6 , Bearing (Part No. 22) For Model-6 , Key (Part No. 23) For Model-6 , Key (Part No. 24) For Model-6 , Key (Part No. 25) For Model-6 , Key (Part No. 26) For Model-6 , Key (Part No. 27) For Model-6 , Key (Part No. 28) For Model-6 , Level Plug (Part No. 29) For Model-6 , Drain Plug (Part No. 30) For Model-6 , Breather Plug (Part No. 31) For Model-6 , Parallel Pin (Part No. 32) For Model-6 , Parallel Pin (Part No. 33) For Model-6 , Hex Head Screw (Part No. 34) For Model-6 , Hex Head Screw (Part No. 35) For Model-6 , Hex Head Screw (Part No. 36) For Model-6 , Circlip (Part No. 37) For Model-6 , Circlip (Part No. 38) For Model-6 , Circlip (Part No. 39) For Model-6 , Circlip (Part No. 40) For Model-6 , Circlip (Part No. 43) For Model-6 , Out Put Shaft (Part No. 41) For Model-6 , Spacer Ring (Part No. 42) For Model-6 , Spacer Ring (Part No. 46) For Model-6 , Input Assembly , Output Assembly , Model-7: As30 F P80 V1, Code: I 11415010002, I- 24.19, Application : Agitators Of Floculant Transfer Tanks(14 V - 13C/D) , Casing With Flange (Part No.2) For Model-7 , Casing With Reducer Flange (Part No.2/1) For Model-7 , Cover (Part No.3) For Model-7 , Internal Support (Part No.4) For Model-7 , Second Recuction Pinion (Part No.5) For Model-7 , 1 St Recduction Gear Wheel (Part No.6) For Model-7 , Extended 1St Reduced Pinion (Part No.7) For Model-7 , Bored 1St Reduced Pinion (Part No.8) For Model-7 , Bored Input Shaft (Part No.9) For Model-7 , Extended Input Shaft (Part No.10) For Model-7 , Gasket (Part No.11) For Model-7 , Gasket (Part No.12) For Model-7 , Oil Seal (Part No.19) For Model-7 , Oil Seal (Part No.20) For Model-7 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No.16) For Model-7 , Bearing (Part No.17) For Model-7 , Bearing (Part No.18) For Model-7 , Key (Part No.21) For Model-7 , Key (Part No.22) For Model-7 , Key (Part No.23) For Model-7 , Key (Part No.25) For Model-7 , Circlip (Part No.26) For Model-7 , Circlip (Part No.27) For Model-7 , Circlip (Part No.28) For Model-7 , Circlip (Part No.29) For Model-7 , Circlip (Part No.48) For Model-7 , Circlip (Part No.49) For Model-7 , Circlip (Part No.31) For Model-7 , Parallel Pin (Part No.32) For Model-7 , Parallel Pin (Part No.33) For Model-7 , Washer (Part No.34) For Model-7 , Drain Plug For Mod-7 , Hex Head Screw (Part No.35) For Model-7 , Hex Head Screw (Part No.36) For Model-7 , Hex Head Screw (Part No.37) For Model-7 , Stud Bolts For Mod-7 , Hexagonal Nutfor Mod-7 , Spacer Ring (Part No.38) For Model-7 , Key (Part No.24) For Model-7 , Circlip (Part No.30) For Model-7 , Out Put Shaft (Part No.44) For Model-7 , 2Nd Reduction Gear Wheel (Part No.45) For Model-7 , Spacer Ring (Part No.46) For Model-7 , Cap (Part No.47) For Model-7 , Input Assembly , Output Assembly , Model-8: As45 F P100 V1, Code: I 11072210004, I-25.55, Application : Agitatorsof Floculant Preparation Tanks (14V - 12 A/B/C/D ) , Casing With Flange (Part No. 2) For Model-8 , Cover (Part No. 3) For Model-8 , Cap (Part No. 5) For Model-8 , Internal Support (Part No. 4) For Model-8 , Gasket (Part No. 6) For Model-8 , Gasket (Part No. 7) For Model-8 , Extended 1St Reduced Pinion (Part No. 8) For Model-8 , Bored 1St Reduced Pinion (Part No. 9) For Model-8 , Gear Wheel 1St Reduction (Part No. 10) For Model-8 , Pinion 2Nd Reduction (Part No. 11) For Model-8 , Gear Wheel, 2Nd Reduction (Part No. 12) For Model-8 , Bored Input Shaft (Part No. 13) For Model-8 , Extended Input Shaft (Part No. 14) For Model-8 , Oil Seal (Part No. 15) For Model-8 , Oil Seal (Part No. 16) For Model-8 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-8 , Bearing (Part No. 21) For Model-8 , Bearing (Part No. 22) For Model-8 , Key (Part No. 23) For Model-8 , Key (Part No. 24) For Model-8 , Key (Part No. 25) For Model-8 , Key (Part No. 26) For Model-8 , Key (Part No. 27) For Model-8 , Key (Part No. 28) For Model-8 , Level Plug (Part No. 29) For Model-8 , Drain Plug (Part No. 30) For Model-8 , Breather Plug (Part No. 31) For Model-8 , Parallel Pin (Part No. 32) For Model-8 , Parallel Pin (Part No. 33) For Model-8 , Hex Head Screw (Part No. 34) For Model-8 , Hex Head Screw (Part No. 35) For Model-8 , Hex Head Screw (Part No. 36) For Model-8 , Circlip (Part No. 37) For Model-8 , Circlip (Part No. 38) For Model-8 , Circlip (Part No. 39) For Model-8 , Circlip (Part No. 40) For Model-8 , Circlip (Part No. 43) For Model-8 , Out Put Shaft (Part No. 41) For Model-8 , Spacer Ring (Part No. 42) For Model-8 , Spacer Ring (Part No. 46) For Model-8 , Input Assembly , Output Assembly , Model-9: As45 F P100 B5 V1, Code: 16A000006012210001, I-15.83,Application : Agitators For Floculant Transfer Tanks (14 V - 13 A / B) , Casing With Flange (Part No. 2) For Model-9 , Cover (Part No. 3) For Model-9 , Cap (Part No. 5) For Model-9 , Internal Support (Part No. 4) For Model-9 , Gasket (Part No. 6) For Model-9 , Gasket (Part No. 7) For Model-9 , Extended 1St Reduced Pinion (Part No. 8) For Model-9 , Bored 1St Reduced Pinion (Part No. 9) For Model-9 , Gear Wheel 1St Reduction (Part No. 10) For Model-9 , Pinion 2Nd Reduction (Part No. 11) For Model-9 , Gear Wheel, 2Nd Reduction (Part No. 12) For Model-9 , Bored Input Shaft (Part No. 13) For Model-9 , Extended Input Shaft (Part No. 14) For Model-9 , Oil Seal (Part No. 15) For Model-9 , Oil Seal (Part No. 16) For Model-9 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-9 , Bearing (Part No. 21) For Model-9 , Bearing (Part No. 22) For Model-9 , Key (Part No. 23) For Model-9 , Key (Part No. 24) For Model-9 , Key (Part No. 25) For Model-9 , Key (Part No. 26) For Model-9 , Key (Part No. 27) For Model-9 , Key (Part No. 28) For Model-9 , Level Plug (Part No. 29) For Model-9 , Drain Plug (Part No. 30) For Model-9 , Breather Plug (Part No. 31) For Model-9 , Parallel Pin (Part No. 32) For Model-9 , Parallel Pin (Part No. 33) For Model-9 , Hex Head Screw (Part No. 34) For Model-9 , Hex Head Screw (Part No. 35) For Model-9 , Hex Head Screw (Part No. 36) For Model-9 , Circlip (Part No. 37) For Model-9 , Circlip (Part No. 38) For Model-9 , Circlip (Part No. 39) For Model-9 , Circlip (Part No. 40) For Model-9 , Circlip (Part No. 43) For Model-9 , Out Put Shaft (Part No. 41) For Model-9 , Spacer Ring (Part No. 42) For Model-9 , Spacer Ring (Part No. 46) For Model-9 , Input Assembly , Output Assembly , Model-10: As45 F P100 V1, Code: I11415320003, I-27.45, Application : I) Product Holding Tanks ( 8V - 2A/B)& Ii) Strong Liquor Oht Tank , Casing With Flange (Part No. 2) For Model-10 , Cover (Part No. 3) For Model-10 , Cap (Part No. 5) For Model-10 , Internal Support (Part No. 4) For Model-10 , Gasket (Part No. 6) For Model-10 , Gasket (Part No. 7) For Model-10 , Extended 1St Reduced Pinion (Part No. 8) For Model-10 , Bored 1St Reduced Pinion (Part No. 9) For Model-10 , Gear Wheel 1St Reduction (Part No. 10) For Model-10 , Pinion 2Nd Reduction (Part No. 11) For Model-10 , Gear Wheel, 2Nd Reduction (Part No. 12) For Model-10 , Bored Input Shaft (Part No. 13) For Model-10 , Extended Input Shaft (Part No. 14) For Model-10 , Oil Seal (Part No. 15) For Model-10 , Oil Seal (Part No. 16) For Model-10 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-10 , Bearing (Part No. 21) For Model-10 , Bearing (Part No. 22) For Model-10 , Key (Part No. 23) For Model-10 , Key (Part No. 24) For Model-10 , Key (Part No. 25) For Model-10 , Key (Part No. 26) For Model-10 , Key (Part No. 27) For Model-10 , Key (Part No. 28) For Model-10 , Level Plug (Part No. 29) For Model-10 , Drain Plug (Part No. 30) For Model-10 , Breather Plug (Part No. 31) For Model-10 , Parallel Pin (Part No. 32) For Model-10 , Parallel Pin (Part No. 33) For Model-10 , Hex Head Screw (Part No. 34) For Model-10 , Hex Head Screw (Part No. 35) For Model-10 , Hex Head Screw (Part No. 36) For Model-10 , Circlip (Part No. 37) For Model-10 , Circlip (Part No. 38) For Model-10 , Circlip (Part No. 39) For Model-10 , Circlip (Part No. 40) For Model-10 , Circlip (Part No. 43) For Model-10 , Out Put Shaft (Part No. 41) For Model-10 , Spacer Ring (Part No. 42) For Model-10 , Spacer Ring (Part No. 46) For Model-10 , Model-11: (Newly Addedmodel)As55 Fp 112, Code: I11825510001 / 2, Batch:5/10, V1, I:25:84 Application : I) Mother Liquor Tank Agitator- Ccr Ii) Seal Pot , Casing With Flange(Part No.2) For Model-11 , Cover (Part No.3)For Model-11 , Internal Support (Part No.4)For Model-11 , Gasket (Part No.5)For Model-11 , Gasket (Part No.6 F)For Model-11 , Extended 1St Reduced Pinion (Part No.7) For Model-11 , Bored 1St Reduced Pinion (Part No.8) For Model-11 , Gear Wheel 1St Reduction (Part No.9)For Model-11 , Gear Wheel 2Nd Reduction (Part No.10)For Model-11 , Pinion 3Rd Reduction (Part No.11) For Model-11 , Gear Wheel (Part No.12)For Model-11 , Cap (Part No.13)For Model-11 , Bored Input Shaft (Part No.14) For Model-11 , Oil Seal (Part No.15) For Model-11 , Oil Seal (Part No.16) For Model-11 , Bearing (Part No.17) For Model-11 , Bearing (Part No.18) For Model-11 , Bearing (Partno.19)For Model-11 , Bearing (Part No.20)For Model-11 , Bearing (Part No.21) For Model-11 , Bearing (Part No.22) For Model-11 , Bearing (Part No.23) For Model-11 , Bearing (Part No.24)For Model-11 , Key (Part No.25) For Model-11 , Key (Part No.26) For Model-11 , Key (Part No.27) For Model-11 , Key (Part No.28) For Model-11 , Key (Part No.29) For Model-11 , Level Plug (Part No.30) For Model-11 , Drain Plug (Part No.31) For Model-11 , Breather Plug (Part No.32) For Model-11 , Parallel Pin (Part No.33) For Model-11 , Parallel Pin (Part No.34) For Model-11 , Hex Head Screw (Part No.35) For Model-11 , Hex Head Screw (Part No.36) For Model-11 , Hex Head Screw (Part No.37) For Model-11 , Circlip (Part No.38) For Model-11 , Circlip (Part No.41) For Model-11 , Circlip (Partno.42) For Model-11 , 2 Nd Reduction Pinioin (Part No.45) For Model-11 , Out Put Shaft (Part No.47) For Model-11 , Spacer Ring (Part No.48) For Model-11 , Circlip (Part No.58) For Model-11 , Circlip (Pat No.39) For Odel-11 , Extended Input Shaft (Part No.50) For Model-11 , Key (Part No.51) For Model-11 , Input Assembly , Output Assembly , Model-12: (Newly Addedmodel) As 35 Fp 100 ;V1, I:15.37 Application :I) Agitators Offloculant Preparation At Uctl-3 Chemical House , Casing With Flange (Part No.2) For Model-12 , Casing With Reducer Flange (Part No.2/1) For Model-12 , Cover (Part No.3) For Model-12 , Internal Support (Part No.4) For Model-12 , Second Recuction Pinion (Part No.5) For Model-12 , 1 St Recduction Gear Wheel (Part No.6) For Model-12 , Extended 1St Reduced Pinion (Part No.7) For Model-12 , Bored 1St Reduced Pinion (Part No.8) For Model-12 , Bored Input Shaft (Part No.9) For Model-12 , Extended Input Shaft (Part No.10) For Model-12 , Gasket (Part No.11) For Model-12 , Gasket (Part No.12) For Model-12 , Oil Seal (Part No.19) For Model-12 , Oil Seal (Part No.20) For Model-12 , Bearing (Part No.13) For Model-12 , Bearing (Part No.14) For Model-12 , Bearing (Part No.15) For Model-12 , Bearing (Part No.16) For Model-12 , Bearing (Part No.17) For Model-12 , Bearing (Part No.18) For Model-12 , Key (Part No.21) For Model-12 , Key (Part No.22) For Model-12 , Key (Part No.23) For Model-12 , Key (Part No.25) For Model-12 , Circlip (Part No.26) For Model-12 , Circlip (Part No.27) For Model-12 , Circlip (Part No.28) For Model-12 , Circlip (Part No.29) For Model-12 , Circlip (Part No.48) For Model-12 , Circlip (Part No.49) For Model-12 , Circlip (Part No.31) For Model-12 , Parallel Pin (Part No.32) For Model-12 , Parallel Pin (Part No.33) For Model-12 , Washer (Part No.34) For Model-12 , Drain Plug (Part No.29) For Model-12 , Hex Head Screw (Part No.35) For Model-12 , Hex Head Screw (Part No.36) For Momdel-12 , Hex Head Screw (Part No.37) For Model-12 , Stud Bolts (Part No.36)For Model-12 , Hexagonal Nut (Part No.37) For Model-12 , Spacer Ring (Part No.38) For Model-12 , Key (Part No.24) For Model-12 , Circlip (Part No.30) For Model-12 , Out Put Shaft (Part No.44) For Model-12 , 2Nd Reduction Gear Wheel (Part No.45) For Model-12 , Spacr Ring (Part No.46) For Model-2 , Cap (Part No.47) For Model-12 , Input Assembly , Otput Assembly

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 07-03-2026 Date Corrigendum Date 20-03-2026
2 28-02-2026 Date Date 10-03-2026
3 28-02-2026 Date Date 10-03-2026
4 14-02-2026 Corrigendum2 Technical Bid 27-02-2026
5 14-02-2026 Corrigendum2 Technical Bid 20-03-2026
6 14-02-2026 Corrigendum2 Technical Bid 10-03-2026
7 30-01-2026 Corrigendum Technical Bid 27-02-2026
8 30-01-2026 Corrigendum Technical Bid 20-03-2026
9 30-01-2026 Corrigendum Technical Bid 10-03-2026

Key Dates
Publish Date 30-01-2026
Last Date of Bid Submission 20-03-2026

Contact Information
Company Name Uranium Corporation Of India Limited
Contact Person SK BARMAN
Address DGM (PURCHASE /Store)URANIUM CORPORATION OF INDIA LIMITED, PURCHASE DEPT ,VEMULA MANDAL, YSR DISTRICT, AP 516349.

BOQ Items
Name of Work:
Sl. No. Item Description
1Model-1:Model: AS55 DF P112, Code: 1900000950717270002, Batch:6/19, V1, i:33:2, Application : i) Neutralization tank agitator ii) Precipitation tanks in chemical house iii) Causticization tanks
2Casing with flange (Part no. 2) for model-1
3Cover (Part no. 3) for model-1
4Internal support (Part no. 4) for model-1
5gasket (Part no. 5) for model-1
6gasket (Part no. 6) for model-1
7Extended 1st reduced pinion (Part no. 7) for model-1
8Bored 1st reduced pinion (Part no. 8) for model-1
9Gear wheel 1st reduction (Part no. 9) for model-1
10Gear wheel 2nd reduction (Part no. 10) for model-1
11Pinion 3rd reduction (Part no. 11) for model-1
12Gear wheel (Part no. 12) for model-1
13Cap (Part no. 13) for model-1
14Bored input shaft (Part no. 14) for model-1
15Oil seal (Part no. 15) for model-1
16Oil seal (Part no. 16) for model-1
17Gear head / box
18In put assembly
19Out put assembly
20Bearing (Part no. 20) for model-1
21Bearing (Part no. 21) for model-1
22Bearing (Part no. 22) for model-1
23Bearing (Part no. 23) for model-1
24Bearing (Part no. 24) for model-1
25Key (Part no. 25) for model-1
26Key (Part no. 26) for model-1
27Key (Part no. 27) for model-1
28Key (Part no. 28) for model-1
29Key (Part no. 29) for model-1
30Level plug (Part no. 30) for model-1
31Drain plug (Part no. 31) for model-1
32Breather plug (Part no. 32) for model-1
33Parallel pin (Part no. 33) for model-1
34Parallel pin (Part no. 34) for model-1
35Hex head screw (Part no. 35) for model-1
36Hex head screw (Part no. 36) for model-1
37Hex head screw (Part no. 37) for model-1
38circlip (Part no. 38) for model-1
39circlip (Part no. 41) for model-1
40circlip (Part no. 42) for model-1
412 nd reduction pinioin (Part no. 45) for model-1
42out put shaft (Part no. 47) for model-1
43spacer ring (Part no. 48) for model-1
44circlip (Part no. 58) for model-1
45circlip (Part no. 39) for model-1
46Extended input shaft (Part no. 50) for model-1
47Key (Part no. 51) for model-1
48Input Assembly
49Output assembly
50Model-2:AS60 DF P112, Code: I 11799930001,Batch:4/10, V1, I:37:1, Application : Feed tank agitator - SSR
51Casing with flange (Part no. 2) for model-2
52Cover (Part no. 3) for model-2
53Internal support (Part no. 4) for model-2
54gasket (Part no. 5) for model-2
55gasket (Part no. 6) for model-2
56Extended 1st reduced pinion (Part no. 7) for model-2
57Bored 1st reduced pinion (Part no. 8) for model-2
58Gear wheel 1st reduction (Part no. 9) for model-2
59Gear wheel 2nd reduction (Part no. 10) for model-2
60Pinion 3rd reduction (Part no. 11) for model-2
61Gear wheel (Part no. 12) for model-2
62Cap (Part no. 13) for model-2
63Bored input shaft (Part no. 14) for model-2
64Oil seal (Part no. 15) for model-2
65Oil seal (Part no. 16) for model-2
66Gear head / box
67In put assembly
68Out put assembly
69Bearing (Part no. 20) for model-2
70Bearing (Part no. 21) for model-2
71Bearing (Part no. 22) for model-2
72Bearing (Part no. 23) for model-2
73Bearing (Part no. 24) for model-2
74Key (Part no. 25) for model-2
75Key (Part no. 26) for model-2
76Key (Part no. 27) for model-2
77Key (Part no. 28) for model-2
78Key (Part no. 29) for model-2
79Level plug (Part no. 30) for model-2
80Drain plug (Part no. 31) for model-2
81Breather plug (Part no. 32) for model-2
82Parallel pin (Part no. 33) for model-2
83Parallel pin (Part no. 34) for model-2
84Hex head screw (Part no. 35) for model-2
85Hex head screw (Part no. 36) for model-2
86Hex head screw (Part no. 37) for model-2
87circlip (Part no. 38) for model-2
88circlip (Part no. 41) for model-2
89circlip (Part no. 42) for model-2
902 nd reduction pinioin (Part no. 45) for model-2
91circlip (Part no. 58) for model-2
92circlip (Part no. 39) for model-2
93Extended input shaft (Part no. 50) for model-2
94Key (Part no. 51)for model-2
95Spacer ring (Part no. 46) for model-2
96Out put shaft (Part no. 49) for model-2
97circlip (Part no. 57) for model-2
98Input Assembly
99Output assembly
100Model-3:AS60 DF P132, Code:I11800030001, Batch:4/10, V1, I:33:4,Application : i) Filtrate tank agitator - SSR &ii) GSM tank - SSRiii) Clarifier underflow tank
101Casing with flange (Part no. 2) for model-3
102Cover (Part no. 3) for model-3
103Internal support (Part no. 4) for model-3
104gasket (Part no. 5) for model-3
105gasket (Part no. 6) for model-3
106Extended 1st reduced pinion (Part no. 7) for model-3
107Bored 1st reduced pinion (Part no. 8) for model-3
108Gear wheel 1st reduction (Part no. 9) for model-3
109Gear wheel 2nd reduction (Part no. 10) for model-3
110Pinion 3rd reduction (Part no. 11) for model-3
111Gear wheel (Part no. 12) for model-3
112Cap (Part no. 13) for model-3
113Bored input shaft (Part no. 14) for model-3
114Oil seal (Part no. 15) for model-3
115Oil seal (Part no. 16) for model-3
116Gear head / box
117In put assembly
118Out put assembly
119Bearing (Part no. 20) for model-3
120Bearing (Part no. 21) for model-3
121Bearing (Part no. 22) for model-3
122Bearing (Part no. 23) for model-3
123Bearing (Part no. 24) for model-3
124Key (Part no. 25) for model-3
125Key (Part no. 26) for model-3
126Key (Part no. 27) for model-3
127Key (Part no. 28) for model-3
128Key (Part no. 29) for model-3
129Level plug (Part no. 30) for model-3
130Drain plug (Part no. 31) for model-3
131Breather plug (Part no. 32) for model-3
132Parallel pin (Part no. 33) for model-3
133Parallel pin (Part no. 34) for model-3
134Hex head screw (Part no. 35) for model-3
135Hex head screw (Part no. 36) for model-3
136Hex head screw (Part no. 37) for model-3
137circlip (Part no. 38) for model-3
138circlip (Part no. 41) for model-3
139circlip (Part no. 42) for model-3
1402 nd reduction pinioin (Part no. 45) for model-3
141circlip (Part no. 58) for model-3
142circlip (Part no. 39) for model-3
143Extended input shaft (Part no. 50) for model-3
144Key (Part no. 51) for model-3
145Spacer ring (Part no. 46) for model-3
146Out put shaft (Part no. 49) for model-3
147circlip (Part no. 57) for model-3
148Input Assembly
149Output assembly
150Model-4:AS60 DF P132 V1, code: I 11520980002, I: 25.47,Application : Dirty wash water tank
151Casing with flange (Part no. 2) for model-4
152Cover (Part no. 3) for model-4
153Internal support (Part no. 4) for model-4
154gasket (Part no. 5) for model-4
155gasket (Part no. 6) for model-4
156Extended 1st reduced pinion (Part no. 7) for model-4
157Bored 1st reduced pinion (Part no. 8) for model-4
158Gear wheel 1st reduction (Part no. 9) for model-4
159Gear wheel 2nd reduction (Part no. 10) for model-4
160Pinion 3rd reduction (Part no. 11) for model-4
161Gear wheel (Part no. 12) for model-4
162Cap (Part no. 13) for model-4
163Bored input shaft (Part no. 14) for model-4
164Oil seal (Part no. 15) for model-4
165Oil seal (Part no. 16) for model-4
166Gear head / box
167In put assembly
168Out put assembly
169Bearing (Part no. 20) for model-4
170Bearing (Part no. 21) for model-4
171Bearing (Part no. 22) for model-4
172Bearing (Part no. 23) for model-4
173Bearing (Part no. 24) for model-4
174Key (Part no. 25) for model-4
175Key (Part no. 26) for model-4
176Key (Part no. 27) for model-4
177Key (Part no. 28) for model-4
178Key (Part no. 29) for model-4
179Level plug (Part no. 30) for model-4
180Drain plug (Part no. 31) for model-4
181Breather plug (Part no. 32) for model-4
182Parallel pin (Part no. 33) for model-4
183Parallel pin (Part no. 34) for model-4
184Hex head screw (Part no. 35) for model-4
185Hex head screw (Part no. 36) for model-4
186Hex head screw (Part no. 37) for model-4
187circlip (Part no. 38) for model-4
188circlip (Part no. 41) for model-4
189circlip (Part no. 42) for model-4
1902 nd reduction pinioin (Part no. 45) for model-4
191circlip (Part no. 58) for model-4
192circlip (Part no. 39) for model-4
193Extended input shaft (Part no. 50) for model-4
194Key (Part no. 51) for model-4
195Spacer ring (Part no. 46) for model-4
196Out put shaft (Part no. 49) for model-4
197circlip (Part no. 57) for model-4
198Input Assembly
199Output assembly
200Model-5:AS80 DF P160, Code:I11837100001,Batch:5/10, V1, I:31:2 & Application : Crystalizer tank agtitator
201Casing with flange (Part no. 2) for model-5
202Cover (Part no. 3) for model-5
203Internal support (Part no. 4) for model-5
204gasket (Part no. 5) for model-5
205gasket (Part no. 6) for model-5
206Extended 1st reduced pinion (Part no. 7) for model-5
207Bored 1st reduced pinion (Part no. 8) for model-5
208Gear wheel 1st reduction (Part no. 9) for model-5
209Gear wheel 2nd reduction (Part no. 10) for model-5
210Pinion 3rd reduction (Part no. 11) for model-5
211Gear wheel (Part no. 12) for model-5
212Cap (Part no. 13) for model-5
213Bored input shaft (Part no. 14) for model-5
214Oil seal (Part no. 15) for model-5
215Oil seal (Part no. 16) for model-5
216Gear head / box
217In put assembly
218Out put assembly
219Bearing (Part no. 20) for model-5
220Bearing (Part no. 21) for model-5
221Bearing (Part no. 22) for model-5
222Bearing (Part no. 23) for model-5
223Bearing (Part no. 24) for model-5
224Key (Part no. 25) for model-5
225Key (Part no. 26) for model-5
226Key (Part no. 27) for model-5
227Key (Part no. 28) for model-5
228Key (Part no. 29) for model-5
229Level plug (Part no. 30) for model-5
230Drain plug (Part no. 31) for model-5
231Breather plug (Part no. 32) for model-5
232Parallel pin (Part no. 33) for model-5
233Parallel pin (Part no. 34) for model-5
234Hex head screw (Part no. 35) for model-5
235Hex head screw (Part no. 36) for model-5
236Hex head screw (Part no. 37) for model-5
237circlip (Part no. 38) for model-5
238circlip (Part no. 41) for model-5
239circlip (Part no. 42) for model-5
2402 nd reduction pinioin (Part no. 45) for model-5
241circlip (Part no. 58) for model-5
242circlip (Part no. 39) for model-5
243Extended input shaft (Part no. 50) for model-5
244Key (Part no. 51) for model-5
245Spacer ring (Part no. 46) for model-5
246circlip (Part no. 40) for model-5
247Out put shaft (Part no. 49) for model-5
248circlip (Part no. 57) for model-5
249Spacer ring (Part no. 59) for model-5
250circlip (Part no. 39) for model-5
251Input Assembly
252Output assembly
253Model:6AS55 F P100, Code: I11825510001 / 2, Batch:5/10, V1, i: 25:84,Application : Mother liquor tank agitator -SSR
254Casing with flange (Part no. 2) for model-6
255Cover (Part no. 3) for model-6
256Cap (Part no. 5) for model-6
257Internal support (Part no. 4) for model-6
258gasket (Part no. 6) for model-6
259gasket (Part no. 7) for model-6
260Extended 1st reduced pinion (Part no. 8) for model-6
261Bored 1st reduced pinion (Part no. 9) for model-6
262Gear wheel 1st reduction (Part no. 10) for model-6
263Pinion 2nd reduction (Part no. 11) for model-6
264Gear wheel, 2nd reduction (Part no. 12) for model-6
265Bored input shaft (Part no. 13) for model-6
266Extended input shaft (Part no. 14) for model-6
267Oil seal (Part no. 15) for model-6
268Oil seal (Part no. 16) for model-6
269Gear head / box
270In put assembly
271Out put assembly
272Bearing (Part no. 20) for model-6
273Bearing (Part no. 21) for model-6
274Bearing (Part no. 22) for model-6
275Key (Part no. 23) for model-6
276Key (Part no. 24) for model-6
277Key (Part no. 25) for model-6
278Key (Part no. 26) for model-6
279Key (Part no. 27) for model-6
280Key (Part no. 28) for model-6
281Level plug (Part no. 29) for model-6
282Drain plug (Part no. 30) for model-6
283Breather plug (Part no. 31) for model-6
284Parallel pin (Part no. 32) for model-6
285Parallel pin (Part no. 33) for model-6
286Hex head screw (Part no. 34) for model-6
287Hex head screw (Part no. 35) for model-6
288Hex head screw (Part no. 36) for model-6
289circlip (Part no. 37) for model-6
290circlip (Part no. 38) for model-6
291circlip (Part no. 39) for model-6
292circlip (Part no. 40) for model-6
293circlip (Part no. 43) for model-6
294out put shaft (Part no. 41) for model-6
295Spacer ring (Part no. 42) for model-6
296Spacer ring (Part no. 46) for model-6
297Input Assembly
298Output assembly
299Model-7:AS30 F P80 V1, code: I 11415010002, i- 24.19, Application : Agitators of Floculant Transfer Tanks(14 V - 13C/D)
300Casing with flange (Part no.2) for model-7
301Casing with reducer flange (Part no.2/1) for model-7
302Cover (Part no.3) for model-7
303Internal support (Part no.4) for model-7
304Second recuction pinion (Part no.5) for model-7
3051 st recduction gear wheel (Part no.6) for model-7
306Extended 1st reduced pinion (Part no.7) for model-7
307Bored 1st reduced pinion (Part no.8) for model-7
308Bored input shaft (Part no.9) for model-7
309Extended input shaft (Part no.10) for model-7
310Gasket (Part no.11) for model-7
311Gasket (Part no.12) for model-7
312Oil seal (Part no.19) for model-7
313Oil seal (Part no.20) for model-7
314Gear head / box
315In put assembly
316Out put assembly
317Bearing (Part no.16) for model-7
318Bearing (Part no.17) for model-7
319Bearing (Part no.18) for model-7
320Key (Part no.21) for model-7
321Key (Part no.22) for model-7
322Key (Part no.23) for model-7
323Key (Part no.25) for model-7
324circlip (Part no.26) for model-7
325circlip (Part no.27) for model-7
326circlip (Part no.28) for model-7
327circlip (Part no.29) for model-7
328circlip (Part no.48) for model-7
329circlip (Part no.49) for model-7
330circlip (Part no.31) for model-7
331Parallel pin (Part no.32) for model-7
332Parallel pin (Part no.33) for model-7
333Washer (Part no.34) for model-7
334Drain Plug for mod-7
335Hex head screw (Part no.35) for model-7
336Hex head screw (Part no.36) for model-7
337Hex head screw (Part no.37) for model-7
338Stud bolts for mod-7
339Hexagonal nutfor mod-7
340Spacer ring (Part no.38) for model-7
341Key (Part no.24) for model-7
342circlip (Part no.30) for model-7
343Out put shaft (Part no.44) for model-7
3442nd reduction gear wheel (Part no.45) for model-7
345Spacer ring (Part no.46) for model-7
346Cap (Part no.47) for model-7
347Input Assembly
348Output assembly
349Model-8:AS45 F P100 V1, Code: I 11072210004, i-25.55,Application : AGITATORSof Floculant Preparation Tanks (14V - 12 A/B/C/D )
350Casing with flange (Part no. 2) for model-8
351Cover (Part no. 3) for model-8
352Cap (Part no. 5) for model-8
353Internal support (Part no. 4) for model-8
354gasket (Part no. 6) for model-8
355gasket (Part no. 7) for model-8
356Extended 1st reduced pinion (Part no. 8) for model-8
357Bored 1st reduced pinion (Part no. 9) for model-8
358Gear wheel 1st reduction (Part no. 10) for model-8
359Pinion 2nd reduction (Part no. 11) for model-8
360Gear wheel, 2nd reduction (Part no. 12) for model-8
361Bored input shaft (Part no. 13) for model-8
362Extended input shaft (Part no. 14) for model-8
363Oil seal (Part no. 15) for model-8
364Oil seal (Part no. 16) for model-8
365Gear head / box
366In put assembly
367Out put assembly
368Bearing (Part no. 20) for model-8
369Bearing (Part no. 21) for model-8
370Bearing (Part no. 22) for model-8
371Key (Part no. 23) for model-8
372Key (Part no. 24) for model-8
373Key (Part no. 25) for model-8
374Key (Part no. 26) for model-8
375Key (Part no. 27) for model-8
376Key (Part no. 28) for model-8
377Level plug (Part no. 29) for model-8
378Drain plug (Part no. 30) for model-8
379Breather plug (Part no. 31) for model-8
380Parallel pin (Part no. 32) for model-8
381Parallel pin (Part no. 33) for model-8
382Hex head screw (Part no. 34) for model-8
383Hex head screw (Part no. 35) for model-8
384Hex head screw (Part no. 36) for model-8
385circlip (Part no. 37) for model-8
386circlip (Part no. 38) for model-8
387circlip (Part no. 39) for model-8
388circlip (Part no. 40) for model-8
389circlip (Part no. 43) for model-8
390out put shaft (Part no. 41) for model-8
391Spacer ring (Part no. 42) for model-8
392Spacer ring (Part no. 46) for model-8
393Input Assembly
394Output assembly
395Model-9:AS45 F P100 B5 V1, Code: 16A000006012210001, i-15.83,Application : Agitators for Floculant Transfer Tanks (14 V - 13 A / B)
396Casing with flange (Part no. 2) for model-9
397Cover (Part no. 3) for model-9
398Cap (Part no. 5) for model-9
399Internal support (Part no. 4) for model-9
400gasket (Part no. 6) for model-9
401gasket (Part no. 7) for model-9
402Extended 1st reduced pinion (Part no. 8) for model-9
403Bored 1st reduced pinion (Part no. 9) for model-9
404Gear wheel 1st reduction (Part no. 10) for model-9
405Pinion 2nd reduction (Part no. 11) for model-9
406Gear wheel, 2nd reduction (Part no. 12) for model-9
407Bored input shaft (Part no. 13) for model-9
408Extended input shaft (Part no. 14) for model-9
409Oil seal (Part no. 15) for model-9
410Oil seal (Part no. 16) for model-9
411Gear head / box
412In put assembly
413Out put assembly
414Bearing (Part no. 20) for model-9
415Bearing (Part no. 21) for model-9
416Bearing (Part no. 22) for model-9
417Key (Part no. 23) for model-9
418Key (Part no. 24) for model-9
419Key (Part no. 25) for model-9
420Key (Part no. 26) for model-9
421Key (Part no. 27) for model-9
422Key (Part no. 28) for model-9
423Level plug (Part no. 29) for model-9
424Drain plug (Part no. 30) for model-9
425Breather plug (Part no. 31) for model-9
426Parallel pin (Part no. 32) for model-9
427Parallel pin (Part no. 33) for model-9
428Hex head screw (Part no. 34) for model-9
429Hex head screw (Part no. 35) for model-9
430Hex head screw (Part no. 36) for model-9
431circlip (Part no. 37) for model-9
432circlip (Part no. 38) for model-9
433circlip (Part no. 39) for model-9
434circlip (Part no. 40) for model-9
435circlip (Part no. 43) for model-9
436out put shaft (Part no. 41) for model-9
437Spacer ring (Part no. 42) for model-9
438Spacer ring (Part no. 46) for model-9
439Input Assembly
440Output assembly
441Model-10:AS45 F P100 V1, Code: I11415320003, i-27.45,Application : i) Product Holding Tanks ( 8V - 2A/B)& ii) Strong liquor OHT tank
442Casing with flange (Part no. 2) for model-10
443Cover (Part no. 3) for model-10
444Cap (Part no. 5) for model-10
445Internal support (Part no. 4) for model-10
446gasket (Part no. 6) for model-10
447gasket (Part no. 7) for model-10
448Extended 1st reduced pinion (Part no. 8) for model-10
449Bored 1st reduced pinion (Part no. 9) for model-10
450Gear wheel 1st reduction (Part no. 10) for model-10
451Pinion 2nd reduction (Part no. 11) for model-10
452Gear wheel, 2nd reduction (Part no. 12) for model-10
453Bored input shaft (Part no. 13) for model-10
454Extended input shaft (Part no. 14) for model-10
455Oil seal (Part no. 15) for model-10
456Oil seal (Part no. 16) for model-10
457Gear head / box
458In put assembly
459Out put assembly
460Bearing (Part no. 20) for model-10
461Bearing (Part no. 21) for model-10
462Bearing (Part no. 22) for model-10
463Key (Part no. 23) for model-10
464Key (Part no. 24) for model-10
465Key (Part no. 25) for model-10
466Key (Part no. 26) for model-10
467Key (Part no. 27) for model-10
468Key (Part no. 28) for model-10
469Level plug (Part no. 29) for model-10
470Drain plug (Part no. 30) for model-10
471Breather plug (Part no. 31) for model-10
472Parallel pin (Part no. 32) for model-10
473Parallel pin (Part no. 33) for model-10
474Hex head screw (Part no. 34) for model-10
475Hex head screw (Part no. 35) for model-10
476Hex head screw (Part no. 36) for model-10
477circlip (Part no. 37) for model-10
478circlip (Part no. 38) for model-10
479circlip (Part no. 39) for model-10
480circlip (Part no. 40) for model-10
481circlip (Part no. 43) for model-10
482out put shaft (Part no. 41) for model-10
483Spacer ring (Part no. 42) for model-10
484Spacer ring (Part no. 46) for model-10
485Model-11:(Newly addedmodel)AS55 FP 112, Code: I11825510001 / 2, Batch:5/10, V1, i:25:84 Application : i) Mother liquor tank agitator- CCRii) seal pot
486Casing with flange(part no.2) for model-11
487Cover (part no.3)for model-11
488Internal support (part no.4)for model-11
489gasket (Part no.5)for model-11
490gasket (part no.6 f)for model-11
491Extended 1st reduced pinion (part no.7) for model-11
492Bored 1st reduced pinion (part no.8) for model-11
493Gear wheel 1st reduction (part no.9)for model-11
494Gear wheel 2nd reduction (part no.10)for model-11
495Pinion 3rd reduction (part no.11) for model-11
496Gear wheel (part no.12)for model-11
497Cap (part no.13)for model-11
498Bored input shaft (part no.14) for model-11
499Oil seal (part no.15) for model-11
500Oil seal (part no.16) for model-11
501Bearing (part no.17) for model-11
502Bearing (part no.18) for model-11
503Bearing (partno.19)for model-11
504Bearing (part no.20)for model-11
505Bearing (part no.21) for model-11
506Bearing (part no.22) for model-11
507Bearing (part no.23) for model-11
508Bearing (part no.24)for model-11
509Key (part no.25) for model-11
510Key (part no.26) for model-11
511Key (part no.27) for model-11
512Key (part no.28) for model-11
513Key (part no.29) for model-11
514Level plug (part no.30) for model-11
515Drain plug (part no.31) for model-11
516Breather plug (part no.32) for model-11
517Parallel pin (part no.33) for model-11
518Parallel pin (part no.34) for model-11
519Hex head screw (part no.35) for model-11
520Hex head screw (part no.36) for model-11
521Hex head screw (part no.37) for model-11
522circlip (part no.38) for model-11
523circlip (part no.41) for model-11
524circlip (partno.42) for model-11
5252 nd reduction pinioin (part no.45) for model-11
526out put shaft (part no.47) for model-11
527spacer ring (part no.48) for model-11
528circlip (part no.58) for model-11
529circlip (pat no.39) for odel-11
530Extended input shaft (part no.50) for model-11
531Key (part no.51) for model-11
532Input Assembly
533Output assembly
534Model-12:(Newly addedmodel) AS 35 FP 100 ;V1, I:15.37Application :i) Agitators offloculant preparation at UCTL-3 Chemical house
535Casing with flange (part no.2) for model-12
536Casing with reducer flange (part no.2/1) for model-12
537Cover (part no.3) for model-12
538Internal support (part no.4) for model-12
539Second recuction pinion (part no.5) for model-12
5401 st recduction gear wheel (part no.6) for model-12
541Extended 1st reduced pinion (part no.7) for model-12
542Bored 1st reduced pinion (part no.8) for model-12
543Bored input shaft (part no.9) for model-12
544Extended input shaft (part no.10) for model-12
545Gasket (part no.11) for model-12
546Gasket (part no.12) for model-12
547Oil seal (part no.19) for model-12
548Oil seal (part no.20) for model-12
549Bearing (part no.13) for model-12
550Bearing (part no.14) for model-12
551Bearing (part no.15) for model-12
552Bearing (part no.16) for model-12
553Bearing (part no.17) for model-12
554Bearing (part no.18) for model-12
555Key (part no.21) for model-12
556Key (part no.22) for model-12
557Key (part no.23) for model-12
558Key (part no.25) for model-12
559circlip (part no.26) for model-12
560circlip (part no.27) for model-12
561circlip (part no.28) for model-12
562circlip (part no.29) for model-12
563circlip (part no.48) for model-12
564circlip (part no.49) for model-12
565circlip (part no.31) for model-12
566Parallel pin (part no.32) for model-12
567Parallel pin (part no.33) for model-12
568Washer (part no.34) for model-12
569Drain plug (part no.29) for model-12
570Hex head screw (part no.35) for model-12
571Hex head screw (part no.36) for momdel-12
572Hex head screw (part no.37) for model-12
573stud bolts (part no.36)for model-12
574Hexagonal nut (part no.37) for model-12
575Spacer ring (part no.38) for model-12
576Key (part no.24) for model-12
577circlip (part no.30) for model-12
578Out put shaft (part no.44) for model-12
5792nd reduction gear wheel (Part no.45) for model-12
580Spacr ring (part no.46) for model-2
581Cap (part no.47) for model-12
582Input Assembly
583Otput Assembly

Other Detail
Information Source https://etenders.gov.in/eprocure/app
Download FileName File Description File Size
Download Tendernotice_1.pdf Tender Documents 0 KB
Download TenderOpeningSchedule.pdf Tender Documents 0 KB
Download Text.pdf Tender Documents 0 KB
Download be0a2cd9-c3e0-4536-8b5d-1f15e5ce2ccd.html Tender Documents 0 KB
Download Annexure-8.pdf Tender Documents 0 KB
Download Annexure1.pdf Tender Documents 0 KB
Download Annexure2.pdf Tender Documents 0 KB
Download Annexure3.pdf Tender Documents 0 KB
Download Annexure4.pdf Tender Documents 0 KB
Download Annexure5.pdf Tender Documents 0 KB
Download Annexure6.pdf Tender Documents 0 KB
Download Annexure7.pdf Tender Documents 0 KB
Download Annexure9.pdf Tender Documents 0 KB
Download BOQ_306972.xls Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.