|
| 1 | 11 KV LINE (Part A) |
| 2 | 11 KV \"V\"cross Arm 10.2 Kg each |
| 3 | Back clamp for 11 KV \"V\" cross Arm |
| 4 | 11 KV F- Clamp 2.9 kg each |
| 5 | 11 KV Disc insulator (T&C)(Ploymer) 45 KN |
| 6 | 11 KV hard wire fitting (T&C) 45 KN |
| 7 | 11 KV Pin Insulator (Ploymer) |
| 8 | HT Stay Set (Complete) |
| 9 | 11 KV Stay Insulator |
| 10 | HT Stay Clamp for PSC Pole/RS Joist (GI) (1.9 Kg/Pair) |
| 11 | 7 / 10 SWG Stay Wire Grade 2 forstay support for XLPE Cable |
| 12 | Earthing device/ Support coil type (GI) |
| 13 | No-8 GI Wire (Dia 4.6mm) 0.131 KG/Mtr.2 mtr for connecting pole with coil earthing |
| 14 | Base plate for support |
| 15 | G.I Nuts, Bolt of Assorted size with washer |
| 16 | 100x 50 x 6mm2 channal for straight cross arm 1.2 mtr each 2 nos & 0.3 mtr long 2 nos. @ 9.2 kg/mtr for 180 degree CP and Tapping 4 nos & 0.3 mtr long 4 nos @ 9.2 kg/mtr for 90 degree CP |
| 17 | Fish plate 50 x 8 mm 0.97 kg/mtr , each 0.280 mtr. Length |
| 18 | 9 Mtr long 300 Kg PSC Pole |
| 19 | 55mm2 AAAC conductor |
| 20 | PG Clamp for 55mm2conductor |
| 21 | GI Barbed wire (Anti climbing device @ 3kg/support) |
| 22 | Back clamp for anticlim device 25 x3 mm flat, 0.6 kg/mtr flat of 0.510 mtr length 4 no\"s per pole |
| 23 | Danger Board |
| 24 | Back clamp for danger board (GI Flat 25x3 [email protected] Kg/mtr) 510mm length (0.306 kg/PC) |
| 25 | Sundrics (Paint, Danger Board, Aluminium binding tape & wire, insulating tape, anti climbing device, Clamp connector, Jumpering Materials, Socket & other accessories etc.) |
| 26 | 25 KVA 11/0.43KV SUBSTATION |
| 27 | 9 Mtr long 300 Kg PSC Pole |
| 28 | Pressure Channel 100 x 50 x 6 mm, (2.8 mtrs long 2 nos ) (9.2 Kg / mtr) |
| 29 | Transformer mounting channel 100 x 50 x 6 mm, 2.8 mtr long 2 nos (9.2kg / mtr.) |
| 30 | AB switch & HG fuse mounting channel (75 x 40 x 6) mm, 2.8 mtr long 4 nos. (6.8 kg / mtr) |
| 31 | Transformer belting 50 x 50 x 6 mm angle 2.8 mtr long 2 nos (4.5 kg / mtr ) with side angle total (7 mtr) |
| 32 | Angle for mounting LT distribution through kit kat 50 x 50 x 6 mm 1.0 mtr long 2. nos (4.5 kg/mtr) 7.5 mtr |
| 33 | 11 KV Disc insulator (T&C) 45KN (Polymer) |
| 34 | 11 KV H/W Fitting (T&C) 45KN |
| 35 | 11KV Line AB Switch (200 Amp) 3 poles 50HZ |
| 36 | HG fuse 11KV-200A 3pole with porceletain insulatoe(P1) |
| 37 | 11KV Lightening Arrestor (9 KV 10KA)station class |
| 38 | LT Distribution box with MCCB Aluminium Busbar of single Bay with kit-kat fuse for 25KVA S/S |
| 39 | LT 3.1/2Core 50 mm2 PVC cable (un-armoured) |
| 40 | GI Flat 25x3 mm @ 0.6 kg/mtr 67 mtr length |
| 41 | HT stay set (complete) |
| 42 | Stay Insulator |
| 43 | HT Stay Clamp (1.9 kg/Pair) |
| 44 | 7/10 SWG G.I. Stay wire, Grade-2 |
| 45 | 40 mm nominal bore GI pipe (medium guage) earthing device with 3 mtr long |
| 46 | Earthing Support (Coil Type) |
| 47 | G.I Base plate for PSC Pole |
| 48 | GI Bolts & Nuts of Assorted size |
| 49 | GI Barbed wire (Anti climbing device @ 3kg/support) |
| 50 | Back clamp for anticlim device 25 x3 mm flat, 0.6 kg/mtr flat of 0.510 mtr length 4 no\"s per pole |
| 51 | Danger Board |
| 52 | Back clamp for danger board (GI Flat 25x3 [email protected] Kg/mtr) 510mm length (0.306 kg/PC) |
| 53 | 25KVA 11/0.4 KV(AL)TransformerBISenergy Level-II |
| 54 | 55mm 2AAAC conductor for Jumpering |
| 55 | Sundries (Paints, Danger Board, Al Binding tape & wire, Insulating cape, anti climbing device, Clamp Connector, Jumpering materials, Socket & other accessories etc.) |
| 56 | Stay concreting in ratio 1:2:4 & 0.2 CUM |
| 57 | Concreting of poles in ratio 1:1.5:3 for 9 M/8 M PSC Pole 0.375 CUM |
| 58 | Couping of poles in ratio 1:1.5:3 for 10M WPB/10 M/ 9M/8 M PSC Pole 0.1125 CUM |
| 59 | Material for earthing including masonary work for earth Pit, Salt, Charcoal and RCC cover |
| 60 | Fencing & Sand Filling & Metal Spreading :-1) RCC Pillar of 6 feet long 2) Cooping of Pillar with C.C Fencing size 10 nos. RCC Pillar and 3ply, G.I Barbed wire and grill (1:3:6) using 400mm HBG metal size 3) G.I Barbed wire @ 6.044 meter/kg 6 nos run= 40 ft X6= 240 ft=73.152 meter=12.10 KG 4) MS Grill gate 1.5 mtr (h) x 1.5 mtr(W) made of 35 x 35 x 6 mm angle and 25x 6 flat ( Angle for out side border with Horozontal & Vertical crossing for i) 35 X 35 mm MS Angle 1.5 meter @ 1.2 kg/ mtr = 28.8 kg iii) Painting of Gate with 2 Coat 5) filling Sand @ 1.359 Cum g) 40 mm size HBG Metal @ 0.679 cum) =I |
| 61 | C.Supply of service connection materials |
| 62 | LT 3 1/2 Core 35 mm2 PVC cable |
| 63 | Insulated piercing connector, Type-B- main 16 to 95 sq.mm & Tap-2.5 to 10 s.q mm. |
| 64 | Netural connector type B suitable for main 35 to 70sq mm AAAC & Tap-2.5 to 10.sq mm service cable cover by black weather resisant insulation cover. |
| 65 | NO-8 SWG GI Wire |
| 66 | 200 A Kit kat fuse |
| 67 | 40mm dia GI S/C brackets |
| 68 | Sundries Please Enable Macros to View BoQ information |
