Tender For Comprehensive Repair/Replacement And Maint Centrifugal, Monoblock, Submersible Pump Sets, Sluice Valves, Gate Valve, Day To Day Repair/Replacement Complaints For Water Supply Lines For Otm And Md Accn And Repair Of Motor, Pipeline Of Fire, Jabalpur-Madhya Pradesh

TDR : 52716653

Tender Notice
BOQ

22 Days Left

Jabalpur , Madhya Pradesh

Tender Brief : Tender For Comprehensive Repair/Replacement And Maint Centrifugal, Monoblock, Submersible Pump Sets, Sluice Valves, Gate Valve, Day To Day Repair/Replacement Complaints For Water Supply Lines For Otm And Md Accn And Repair Of Motor, Pipeline Of Fire

Document Fees
₹ 1000 /-

EMD
₹ 213000.0 /-

Tender Value
₹ 1.37 Crore /-

Submission Date
31-12-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavation in trenches not exceeding 1.5 m wide and not exe 1.5 m in depth in any type of hard/dense soil complete all as specified.
2	Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm complete all as specified.
3	Removing excavated material not exc 50 meters and depositing where directed at a level not exc 1.5 m above the statring point.
4	Cutting existing cast iron / DI pipes of size 150 mm bore in any position for insert of new pipe/tees, branches etc complete all as specified.
5	All as per srl item No 4 here-in-before but 200 mm dia bore.
6	All as per srl item No 4 here-in-before but 100 mm dia bore.
7	All as per srl item No 4 here-in-before but 80 mm dia bore.
8	Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints of 150 mm size including burning out joints and recovering lead.
9	All as per srl item No 8 here-in-before but 200 mm dia bore.
10	All as per srl item No 8 here-in-before but 100 mm dia bore.
11	All as per srl item No 8 here-in-before but 80 mm dia bore.
12	Supply and laying pipe ductile Iron(DI) pipes with spigot and socket ends centrifugally cast. S/S including specials, Class “K-9” ,150 mm diain any length laid in trenches of size complete all as specified and directed.
13	Supply and laying pipe ductile Iron(DI) pipes with spigot and socket ends centrifugally cast. S/S including specials, Class “K-9” ,200 mm diain any length laid in trenches of size complete all as specified and directed.
14	Supply and laying pipe ductile Iron(DI) pipes with spigot and socket ends centrifugally cast. S/S including specials, Class “K-9” ,100 mm diain any length laid in trenches of size complete all as specified and directed.
15	Supply and laying pipe ductile Iron(DI) pipes with spigot and socket ends centrifugally cast. S/S including specials, Class “K-9” ,80 mm diain any length laid in trenches of size complete all as specified and directed.
16	Supply and laying pipe GI Tubes, \"medium grade pipes with spigot and socket ends centrifugally cast. 80 mm diain any length laid in trenches of size complete all as specified and directed.
17	M&L for run lead joints for 150 mm dia size ofpipes complete for water mains with spigot & socket pipes and fittings complete all as specified and directed :-
18	All as per srl item No 17 here-in-before but 200 mm dia bore.
19	All as per srl item No 17 here-in-before but 100 mm dia bore.
20	All as per srl item No 17 here-in-before but 80 mm dia bore.
21	S&F rubber gasketjoint for flanged end pipe & fittings ofsize 150 mm dia pipes :-
22	All as per srl item No 21 here-in-before but 200 mm dia bore.
23	All as per srl item No 21 here-in-before but 100 mm dia bore.
24	All as per srl item No 21 here-in-before but 80 mm dia bore.
25	M&L for lead wool joint for 200mm size of pipe complete for watr mains with spigot & socket pipes and fittings complete all as specified and directed.
26	All as per srl item No 25 here-in-before but 150 mm dia bore.
27	All as per srl item No 25 here-in-before but 100 mm dia bore.
28	All as per srl item No 25 here-in-before but 80 mm dia bore.
29	S&F up to 150 mm bore diaspigot/flanged/ socketed CI fittings. such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etccomplete all as specified.
30	S&F 200 to 300 mm bore diaspigot/flanged/ socketed CI fittings. such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etccomplete all as specified.
31	M & L for cutting/screwing existing steel tubing of 40/50 mm pipe for alterations or additions(each cut Measured)
32	All as per srl item No 31 here-in-before but 25 mm dia bore.
33	All as per srl item No 31 here-in-before but 20 mm dia bore.
34	All as per srl item No 31 here-in-before but 15 mm dia bore.
35	Taking up or down GI tubing and connections of 50 mm dia pipe line. including cleaning for refixing or removal to sch of credit complete all as directed by engr in charge.
36	All as per srl item No 35 here-in-before but 40 mm dia bore.
37	All as per srl item No 35 here-in-before but 25 mm dia bore.
38	All as per srl item No 35 here-in-before but 20 mm dia bore.
39	All as per srl item No 35 here-in-before but 15 mm dia bore.
40	Supply laying jointing, threading 50 mm bore GI tubing medium grade laid in trenches with socket joint together with and including all fittings (Such as bend, elbow, tees, short pices connector, caps, plug and union etc) by cutting welding etc complete all as specified.
41	All as per srl item No 41 here-in-before but 40 mm dia bore.
42	All as per srl item No 41 here-in-before but 25 mm dia bore.
43	All as per srl item No 41 here-in-before but 20 mm dia bore.
44	All as per srl item No 41 here-in-before but 15 mm dia bore.
45	Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, trenches etc.) of 20 mm size:- (Note : Taking out pipe line will be measured and paid separately under relevent items of this schedule)
46	All as per item srl No. 45 above, But of size 25 mm bore complete.
47	All as per item srl No. 45 above, But of size 40/50 mm bore complete.
48	All as per item srl No. 45 above, But of size 15 mm bore complete.
49	Taking down unserviceable sluice valve/NRV(check valve, clack valve, one-way valve or retention valve)/Air Release Valveof size 80-150 mm dia.
50	Supply and fixing in replacement of sluice valve flanged end drilled type with Brass spindle including nuts, bolts and jointing materials class PN-1.6ISI markedof size 80 mm bore all as specified and directed by Engr-in-Charge.
51	All as per srl item No 50 here-in-before but 100 mm dia bore.
52	All as per srl item No 50 here-in-before but 150 mm dia bore.
53	All as per srl item No 50 here-in-before but 200 mm dia bore.
54	M&L for Repacking stuffing box of sluice valve spindle including taking apart and reassembling of size 150mm dia,
55	All as per srl item No 54 here-in-before but 200 mm dia bore.
56	All as per srl item No 54 here-in-before but 100 mm dia bore.
57	All as per srl item No 54 here-in-before but 80 mm dia bore.
58	Supply and fixing in replacment of Non Return Sluice Valve drilled type with steel spindle including nuts, bolts and jointing materials complete all as specified ISI markedof size 80 mm bore all as specified and directed by Engr-in-Charge.
59	All as per srl item No 58 here-in-before but 100 mm dia bore.
60	All as per srl item No 58 here-in-before but 150 mm dia bore.
61	All as per srl item No 58 here-in-before but 200 mm dia bore.
62	S&F in replacemnt of Air release valve 80 mm dia of Cast Iron Air Valves with twoair Outlets, conforming to IS 14845 all as specified and directed.
63	All as per srl item No 62 here-in-before but 100 mm dia bore.
64	All as per srl item No 62 here-in-before but 150 mm dia bore.
65	Taking out sluice valves of size 80 mm, re-facing, re-grinding, replacing checknut and re-fixingall as specified and directed.
66	All as per item srl No. 65 above, But of size 100 mm bore complete.
67	All as per item srl No. 65 above, But of size 150 mm bore complete.
68	All as per item srl No. 65 above, But of size 200 mm bore complete.
69	M&L in replacement for gun metal globe or gate valve 50 mm bore with iron wheel head screwed both ends for pipe line and fixing complete all as specified.
70	All as per item srl No. 69 above, But of size 40 mm bore complete.
71	All as per item srl No. 69 above, But of size 25 mm bore complete.
72	All as per item srl No. 69 above, But of size 20 mm bore complete.
73	All as per item srl No. 69 above, But of size 15 mm bore complete.
74	Supply and fixin replacment of CI foot valve, flanged end anddrilledof size 100 mm dia ISI MARKED.
75	Supply and fixin replacment of Metalic foot valve, flanged end anddrilledof size 80 mm dia ISI MARKED.
76	M&L cutting of road, hard standing made of concrete or premix carpet, suitable for soiling and morrum filling incl excavation for laying of pipe upto 150 mm dia, all as directed and making Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded roadmetal, watering and well ramming (including supply of road metal) ®
77	Dismantling existing valve pit and M&L for construction of masonry valve pitwith the following specification:- Brick work in CM (1:4) with sub class \"B\" bricks, 15mm thick plastering in CM (1:4), PCC (1:4:8) type D-2 in foundation, chamber of internal size 900 x 900x1200 mm,150mm thick copping on top in PCC (1:3:6), type C-1, 3mm thick MS sheet for cover, angle iron 40mmx40mmx5mm for frame all around with suitable handle with locking arrangement includingtwo coats of synthetic enamel paint over a coat of red oxide primed on MS work and twi coats of synthetic enamal paint and preparation of surfaces complete all as specifiedand shown on drawing.
78	Dismantling existing valve pit and M&L for construction of masonry valve pitwith the following specification:- Brick work in CM (1:4) with sub class \"B\" bricks, 15mm thick plastering in CM (1:4), PCC (1:4:8) type D-2 in foundation, chamber of internal size 600 x 600x900 mm,180/50/40 MMdia sluice valvethick copping on top in PCC (1:3:6), type C-1, 3mm thick MS sheet for cover 3.0mm thick with MS angle iron 25mmx25mmx3mm for frame all around with suitable handle with locking arrangement includingtwo coats of synthetic enamel paint over a coat of red oxide primed on MS work and two coats of synthetic enamal paint and preparation of surfaces complete all as specifiedand shown on drawing.
79	S & F for structural steel section supportfor covering valve pit along with angle bracing, support clamps and back plates fabricated including nuts, bolts, washers, welding, bending, cold or hot drilling holes for bolts in any shape or size as indicated and also provide T for operating of the Valve as required length or directed including two coats of synthetic enamel paint over a coat of red oxide primer complete.
80	M & L for replacment of unserviceableball valve and S & F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed, 20mm-210 gms.GI fittings such as elbow, nipple etc for the following sizes all as specified.
81	All as per item srl No. 80 above, But of size 25 mm bore complete.
82	All as per item srl No. 80 above, But of size 40 mm bore complete.
83	All as per item srl No. 80 above, But of size 50 mm bore complete.
84	Taking up Submersible Pump assembly including column pipe approx50 to70 mtrs using chain pulley block manuallyfor 10-15HP pumps and lowering the pump including reconnecting with existing pipe and making electrical connection with panel board & starter, complete all as specified and directed by Engr-in -Charge.
85	M&L for Rewinding the 10 HP Submersible Motor with super enamelled copper winding wire with appropriate same gauge of exsisting coil with similar class of exsisting insulation as recommended by manufacturer with high quality normex insulating paper applying best quality insulating varnish on stator/rotor windings drying them completely, testing the insulationsto the entire satisfaction ofEngr-in -Charge. all as specified and directed.
86	All as per item srl No. 85 above, But of size 12.5 HP Motor complete.
87	All as per item srl No. 85 above, But of size 15 HP Motor complete.
88	All as per item srl No. 85 above, But of size 20 HP Motor complete.
89	All as per item srl No. 85 above, But of size 25 HP Motor complete.
90	Dismantling the Submersible Pump set 10 HP from column pipe and separating the defective multistage pump & transporting to workshop for repair i.e cleaning and derusting of casing, replacement of worm out spare like bearings, impellar bushing, couplingetc & refixing of existing serviceable components after proper cleaning, machining all as required & assembling testing at workshop completeincluding carrying out painting by two coats of synthetic enamelled paint over a coat of primer,assembling the pump and motor including testing the pump to the entire satisfaction ofengr-in -charge all as specified and directed.Cost of lowering of pump set in borewell andfixing of spare parts shall be incuded in the quoted rate of this item.
91	Supply only against item no. 90 above Bearing
92	Supply only against item no. 90 above Impellar
93	Supply only against item no. 90 above Impellar bushing
94	Supply only against item no. 90 above Coupling
95	All as per item srl No. 90 above, But Submerisble Pump set 12.5 HP complete.
96	Supply only against item no. 95 above Bearing
97	Supply only against item no. 95 above Impellar
98	Supply only against item no. 95 above Impellar bushing
99	Supply only against item no. 95 above Coupling
100	All as per item srl No. 90 above, But Submerisble Pump set 15 HP complete.
101	Supply only against item no. 100 above Bearing
102	Supply only against item no. 100 above Impellar
103	Supply only against item no. 100 above Impellar bushing
104	Supply only against item no. 100 above Coupling
105	All as per item srl No. 90 above, But Submerisble Pump set 20 HP complete.
106	Supply only against item no. 105 above Bearing
107	Supply only against item no. 105 above Impellar
108	Supply only against item no. 105 above Impellar bushing
109	Supply only against item no. 105 above Coupling
110	All as per item srl No. 90 above, But Submerisble Pump set 25 HP complete.
111	Supply only against item no. 110 above Bearing
112	Supply only against item no. 110 above Impellar
113	Supply only against item no. 110 above Impellar bushing
114	Supply only against item no. 110 above Coupling
115	Taking out of centrifugal pump set 75 HP from pump foundation after disconnection from motor and transportation to workshop , dismantling the pump for repair/ overhauling including cleaning of all parts of pump assembly throughly, including machine work of pump shaft inorder to obtain smooth finish including necessary polishing etc and transporting to MES pump huse, fitting on foundation, using heliumgasket sheet not less then 1mm thick & to the entire satisfaction ofEngr-in -Charge. all as specified and directed. Note:- (i)Spare partsas required shall be measure & paid seperately against the relevant items. (ii) Make/Size of spare parts of centrifugal Pump Set shall be as per existing centrifugal pump set. (iii) Cost of fixing of spare parts shall be incuded in the quoted rate of this item.
116	Supply only against item no. 115 above impellar
117	Supply only against item no. 115 above Mechanical Seal
118	Supply only against item no. 115 above Coupling
119	Supply only against item no. 115 above shaft
120	Supply only against item no. 115 above bearing
121	Supply only against item no. 115 above shaft sleeve
122	Supply only against item no. 115 above Inter Stage Ring-
123	Supply only against item no. 115 above Ball bearing SKF
124	Supply only against item no. 115 above Ball bearing SKF
125	Supply only against item no. 115 above Bearing cartridge DE
126	Supply only against item no. 115 above Bearing cartridge NDE
127	Supply only against item no. 115 above shaft sleeve Nuts
128	Supply only against item no. 115 above Split Gland
129	All as per item srl No. 115 above, But Centrifugal pump set 60 HP complete.
130	Supply only against item no. 129 above impellar
131	Supply only against item no. 129 above Mechanical Seal
132	Supply only against item no. 129 above Coupling
133	Supply only against item no. 129 above shaft
134	Supply only against item no. 129 above bearing
135	Supply only against item no. 129 above Casing Wear Ring
136	Supply only against item no. 129 aboveshaft sleeve
137	Supply only against item no. 129 aboveInter Stage Ring
138	Supply only against item no. 129 aboveBall bearing SKF
139	Supply only against item no. 129 aboveBall bearing SKF
140	Supply only against item no. 129 aboveBearing cartridge DE
141	Supply only against item no. 129 aboveBearing cartridge NDE
142	Supply only against item no. 129 aboveshaft sleeve Nuts
143	Supply only against item no. 129 aboveSplit Gland
144	All as per item srl No. 115 above, But Centrifugal pump set 50 HP complete.
145	Supply only against item no. 144 above impellar
146	Supply only against item no. 144 above Mechanical Seal
147	Supply only against item no. 144 above Coupling
148	Supply only against item no. 144 above shaft
149	Supply only against item no. 144 above bearing
150	Supply only against item no. 144 above Casing Wear Ring
151	Supply only against item no. 144 aboveshaft sleeve
152	Supply only against item no. 144 aboveInter Stage Ring
153	Supply only against item no. 144 aboveBall bearing SKF
154	Supply only against item no. 144 aboveBall bearing SKF
155	Supply only against item no. 144 aboveBearing cartridge DE
156	Supply only against item no. 144 aboveBearing cartridge NDE
157	Supply only against item no.144 aboveshaft sleeve Nuts
158	Supply only against item no. 144 aboveSplit Gland
159	All as per item srl No. 115 above, But Centrifugal pump set 15 HP complete.
160	Supply only against item no. 159 above impellar
161	Supply only against item no. 159 above Mechanical Seal
162	Supply only against item no. 159above Coupling
163	Supply only against item no. 159above shaft
164	Supply only against item no. 159above bearing
165	All as per item srl No. 115 above, But Centrifugal pump set 7.5 HP complete.
166	Supply only against item no. 165 above impellar
167	Supply only against item no. 165 above Mechanical Seal
168	Supply only against item no. 165 above Coupling
169	Supply only against item no. 165 above shaft
170	Supply only against item no. 165 above bearing
171	Supply only against item no. 165 above Casing Wear Ring
172	Supply only against item no. 165 aboveshaft sleeve
173	Supply only against item no. 165 aboveInter Stage Ring
174	Supply only against item no. 165 aboveBall bearing SKF
175	Supply only against item no. 165 aboveBall bearing SKF
176	Supply only against item no. 165 aboveBearing cartridge DE
177	Supply only against item no. 165 aboveBearing cartridge NDE
178	Supply only against item no. 165 aboveshaft sleeve Nuts
179	Supply only against item no. 165 aboveSplit Gland
180	All as per item srl No. 115 above, But Centrifugal pump set 10 HP complete.
181	Supply only against item no. 180 above impellar
182	Supply only against item no. 180 above Mechanical Seal
183	Supply only against item no. 180 above Coupling
184	Supply only against item no. 180 above shaft
185	Supply only against item no. 180 above bearing
186	Taking out of centrifugal pump set 125 HP from pump foundation after disconnection from motor and transportation to workshop , dismantling the pump for repair/ overhauling including cleaning of all parts of pump assembly throughly, including machine work of pump shaft inorder to obtain smooth finish including necessary polishing etc and transporting to MES pump huse, fitting on foundation, using heliumgasket sheet not less then 1mm thick & to the entire satisfaction ofEngr-in -Charge. all as specified and directed. Note:- (i)Spare partsas required shall be measure & paid seperately against the relevant items. (ii) Make/Size of spare parts of centrifugal Pump Set shall be as per existing centrifugal pump set. (iii) Cost of fixing of spare parts shall be incuded in the quoted rate of this item.
187	Supply only against item no. 186 above impellar
188	Supply only against item no. 186 above shaft sleeve
189	Supply only against item no. 186 above Mechanical Seal
190	Supply only against item no. 186 above Coupling
191	Supply only against item no. 186 above shaft
192	Supply only against item no. 186 above bearing
193	M&L for Rewinding the 125 HP Centrifugal induction Motor with super enamelled copper winding wire with appropriate same gauge of exsisting coil with similar class of exsisting insulation as recommended by manufacturer with high quality normex insulating paper applying best quality insulating varnish on stator/rotor windings drying them completely, testing the insulationsto the entire satisfaction ofEngr-in -Charge. all as specified and directed.
194	All as per item srl No. 193 above, But 75 HP Induction Motor of Centrifugal pump set complete.
195	All as per item srl No. 193 above, But 60 HP Induction Motor of Centrifugal pump set complete.
196	All as per item srl No. 193 above, But 50 HP Induction Motor of Centrifugal pump set complete.
197	All as per item srl No. 193 above, But 15 HP Induction Motor of Centrifugal pump set complete.
198	All as per item srl No. 193 above, But 10 HP Induction Motor of Centrifugal pump set complete.
199	All as per item srl No. 193 above, But 7.5 HP Induction Motor of Centrifugal pump set complete.
200	M & Lin replacement of Fully Automatic Star Delta Motor starter 125 HP in sheet-steel enclosure type ML with single phase protection feature (Motor Rating AC-3 Duty, 415V, 50Hz, 3-Ph) and Relay Range 45-75 complete to the entire satisfaction ofEngr-in -Charge. all as specified and directed.
201	M & Lin replacement of Fully Automatic Star Delta Motor starter 75 HP in sheet-steel enclosure type ML with single phase protection feature (Motor Rating AC-3 Duty, 415V, 50Hz, 3-Ph) and Relay Range 45-75 complete to the entire satisfaction ofEngr-in -Charge. all as specified and directed.
202	M&Lin replacement of Fully Automatic Star Delta Motor starter 50HP in sheet-steel enclosure type ML with single phase protection feature (Motor Rating AC-3 Duty, 415V, 50Hz, 3-Ph) and Relay Range42-63 completeto the entire satisfaction ofEngr-in -Charge. all as specified and directed.
203	M&L for trimming vegetation or small inequalities clearingall grass vegetation, saplings, shrubs, brushwood,roots inside the sump or valve pits, and tree of surroundings area including and removing rubbish upto a distance of 50 meters outside the periphery of the area under clearance of water supply installations and Sumps complete all as specified and as directed.
204	M&L draining water from OHT up to 100000 gallon capacity reservoirs not exc. 20 Mtr head/staging, and cleaning internal portion of tank (bottom and walls) by means coir/ wire brush etc. and wash the internal portion of tanks by using bleaching powder @ 25 grams per 1000 Ltrs of water after removing sludge and mud etc to a distance not exc 50 mtr including one coat of synthetic enamel paint on all steel surfaces such as ladder, railing,inlet & over flow CI pipes connected sluice valves of the respective OH tanks reservoir etc writing letters with white paint (date of cleaning and capcity of tank)on black painted surface of tanks and alos provide Water Level Alarm on Tank FULL all as directed by Engineer-in-Charge at following location(a) CMM area -04 nos
205	M&L draining water from semi undergroundreservoir/sump up to 100000 gallon capacity reservoirsand cleaning internal portion of sump (bottom and walls) by means coir/ wire brush etc. and wash the internal portion of tanks by using bleaching powder @ 25 grams per 1000 Ltrs of water after removing sludge and mud etc to a distance not exc 50 mtr including one coat of synthetic enamel paint on all steel surfaces such asinlet & over flow CI pipes connected sluice valves of the respective ground level reservoir etc writing letters with white paint (date of cleaning and capcity of tank)on black painted surface of tanks all as directed by Engineer-in-Charge at following location (a)Rawalson and 37 No PH - 02 Nos (b) COD Area - 02 Nos
206	Supply and fix in replacment ofthe following parts of Float and Board Type Level Indicatorfor Over Head Tank :-
207	Float: Size: Ø280mm x 80mm
208	Pulley: SS 316
209	Limb Pipe: MS powder coated/SS 304
210	Rope: Size: ø2mm
211	Rope Clamp: SS 304/SS 316
212	Mounting Flange: Size: 1” to 3” ANSI Standard/ANSI with 10mm thickness
213	Counter Flange with Nozzle (Optional): MS/SS 304
214	Anchor: SS 304/SS 316
215	Scale Board: 150mm wide pure polyester weatherproof powder coated aluminium board/SS 304
216	Pointer: Mild Steel with powder coated/SS 304 pointer with frictionless rollers
217	Scale Marking: Printed scale with black marking(cm) & reflective red radium marking(meter)
218	Chemical Analysis of raw water of borewell and external source water for all parameters for ascertaining water fitness (Portability and bacterial) for human consumption through Government of NABL approved laboratory with necessary collector vessels/cans.complete all as specified and directed by Engr-in-Charge.NOTE: Each job consist of 13 samples to be collected from different locations of borewells on contractors own arrangment.
219	M & L in replacement of submersible pump MU-G 15 FASD Three phase submersible pump Controllerswith single phase preventer of 15 HP in sheet-steel enclosure type ML with Wideband coil conf to HSN Code 8536 all as as directed by Engr-in-Charge.
220	S & F PVC Insulated unsheathed Submersible cable 10 sqmm dia three core multistranded bright annealed copper conductor 1100 volts, including taking down conf to IS-694 all as as directed by Engr-in-Charge.
221	S & F PVC Insulated unsheathed Submersible cable 16 sqmm dia three core multistranded bright annealed copper conductor 1100 volts, including taking down conf to IS-694 all as as directed by Engr-in-Charge.
222	S & F PVC Insulated unsheathed Submersible cable 6 sqmm dia three core multistranded bright annealed copper conductor 1100 volts, including taking down conf to IS-694 all as as directed by Engr-in-Charge.
223	S&F MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA
224	S&F MCCB 4 Pole, 415 V, Adjustable type, 350 Amps with breaking capacity 36 KA
225	S&F MCCB 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA
226	Taking out of UNSV mono block pump 0.5-1 HP ,single Phase 230 volt 1200 RPM ,50 Hz forbusting of water supply with GI pipe fittings after disconnection from motor and transportation to workshop , dismantling the pump for repair/ overhauling incluiding cleaning of all parts of pump assembly throughly, including machine work of pump shaft inorder to obtain smooth finish including necessary polishing etc and installing back including heliumgasket sheet not less then 1mm thick & to the entire satisfaction ofengr-in -charge all as specified and directed. Cost of fixing of spare parts shall be incuded in the quoted rate of this item. complete all as specified and directed.
227	Supply only against item no. 226 above Casing Wear Ring
228	Supply only against item no. 226 aboveshaft sleeve
229	Supply only against item no. 226 aboveInter Stage Ring
230	Supply only against item no. 226 aboveBall bearing
231	Supply only against item no. 226 aboveshaft sleeve Nuts
232	Supply only against item no. 226 abovesplit gland
233	Material and labour to attend breakdown complaints like no water supply in service tank, pipe line leakages of size upto 50 mm dia. etc and also removing air lock in married / OTM accommodation with help of required tools and GI fittings of any size/dia like union, elbow, tee, bend, nipple, socket etc including excavation if required for rectification of leakage of GI pipe all as specified and directed.(i) Rate of item union, elbow, nipple, bend, socket etc of required size shall be included in the unit quoted rate.
234	Rectification/arresting of leakage in the under ground CI/DI pipe water line 80mm to 200mm dia including necessary excavation and filling in wet condition, taking out of existing pipes/cutting of pipes, stoping of water leakage, repairs of CI pipe line burning out/ removing lead joint andrefixing pipe/ fitting in original position re-aligning to existing CIcollars at both ends, testing of leakage andcomplete of the following size of pipe as specified and directed.NOTE: (i)Cast iron pipe shall be measured and paid separately under relevant items.(ii) CI fittings, lead,lead wool, if required for stopping the leakage shall be supplied by the contractor without extra cost. (iii)Cost of excavation will deemed to be included in the quoted unit rate.NOTES :-1.The time limit forattending the complaints on intimation to the contractors by the department shall be as under:-(a) Repair to motor/pump - within 2 days (b) Other Misc jobs- with in 1 day2.In case the contractor fails to attend/rectify the defects within the above time limit, penalty will the imposed as Rs 1000/- per day in case of complaints/jobs mentioned at note 1 (a) & (b) above. 3. The contractor or his authorised representative shall report to concered JE or the Engineer-in-charge at 0930 hours daily on all working days to receive order/instructions of the work or regular complaints. A register shall be maintained to record all orders & instructions and their complaints and is to be signed by the contractor/his representative and the Engineer-in -Charge / JE Concered.
235	Taking down old unserviceable GI / M S Pipes Heavy Class pipe of 80 mm dia submersible column pipe from borewell complete
236	Supply, fixing, lowering and jointing M S Pipes heavygrade with all fittings and fixtures including all accesories of sizessize 80 mm dia colum pipe complete suitable forabove ground as per sizes shown.
237	M & L for Flushing out / desilting of the bore well by using compresser hydro pressure jet till clear the silt in the casing pipe by achiving clear water, and washing with hydro pressure jet using foam/oils, disinfecting the bore using sodium hypochloride solution and washing out till water is obtained to the required turbidity (clean water) to the entire satisfacton of Engr-In-Charge
238	Supplying and laying synthetic Rubber insulated mats 2.5 mm thick for voltage upto 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m. complete
239	Supply and fix direct Altoch GP Dosing System of 100 litres with Doser pump 0.9 Amp,250 volts 100psi,Doser motor 0.8 Amp,220 volts,PVC pipe connection inlet to Doser and outlet to Doser, for chemical dosing including all gauges, pump, motor,conforming to IS 10553 part - 2 having capacity 1.0 to 1000gm/hr.
240	M&L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less \"than 1.5 metres below normal ground level, connected to galvanised earth lead wire strip 32×6mm as earthing lead dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.
241	M& L for Strainer of Suction 100 mm dia complete set all as specified and directed.
242	Supply and fix ofMS clamp made out of 50 X 6mm MS flat of size for holding 80mm dia GI tubing including nut , bolt& washer complete all as specified and directed.
243	M&L for DI mechanical joint for 200mm dia size of pipes complete for water mains with spigot and socket pipes and fittings complete all as specified and directed.
244	All as per item no. 243 here-in-above but 150mm dia bore
245	All as per item no. 243 here-in-above but 100mm dia bore
246	All as per item no. 243 here-in-above but 800mm dia bore
247	M&L for DI Tyton joint for 200mm dia size of pipes complete for water mains with spigot and socket pipes and fittings complete all as specified and directed.
248	All as per item no. 247 here-in-above but 150mm dia bore
249	All as per item no. 247 here-in-above but 100mm dia bore
250	Supply and laying in replacement of 3- layer PP-R (Polypropylene random copolymer) concealed pipes of 16mm dia SDR 7.4 of (PN 16) UV stablized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plains & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors etc
251	All as per item No. 250 above, but outer dia 20mm.
252	All as per item No. 250 above, but outer dia 25mm.
253	Supply & fixing in replacement of PPR Gate valve (Brass insert) of 20mm bore.
254	Supply & fixing in replacement of PPR Gate valve (Brass insert) of 25mm bore.
255	Making connections of PP-R distribution branch with PP-R main of 16 to 40mm size by providing and fixing tee incl cutting and making fusion joint.
256	M&L in replacement of water meter bore of pipe in 100mm with flanged joints, including removal of flanged connecting piece, or blank flange a length of flanged connecting pipe (or two blank flanges) and labour only for two flanged joint complete all as specified.
257	Taking out of centrifugal motor 125 HP from foundation after uncoupling mechanically and disconnecting electrically from pump, disengaging the defective AC Squirrel cage induction motor 3 phase 415 volts, 50 cycle and transportation the induction motor to workshop for repair purpose including complete cleaning, varnishing, reinsulation and greasing and including shifting back to MES pump house as directed, installing, testing and commissioning after repair complete to the entire satisfaction of Engr-in-Charge all as specified and directed.Note: Rewinding will b measured and paid seperately under relevant item of Schedule
258	All as per item No. 257 above, but 75 HP Induction Motor of Centrifugal pump set complete.
259	All as per item No. 257 above, but 60 HP Induction Motor of Centrifugal pump set complete.
260	All as per item No. 257 above, but 50 HP Induction Motor of Centrifugal pump set complete.
261	All as per item No. 257 above, but 15 HP Induction Motor of Centrifugal pump set complete.
262	All as per item No. 257 above, but 7.5 HP Induction Motor of Centrifugal pump set complete.
263	All as per item No. 257 above, but 10 HP Induction Motor of Centrifugal pump set complete.
264	M&L in replacement of submersible pump controllers with single phase preventer of 30 HP in sheet-steel enclosure type ML with wideband coil conf to HSN code 8536 complete all as specified and directed.
265	M&L in replacement of submersible pump controllers with single phase preventer of 20 HP in sheet-steel enclosure type ML with wideband coil conf to HSN code 8536 complete all as specified and directed.
266	M&L in replacement of submersible pump controllers with single phase preventer of 15 HP in sheet-steel enclosure type ML with wideband coil conf to HSN code 8536 complete all as specified and directed.
267	S&F in replacement of the electronic water level indicator for over head tank complete all as specified and directed
268	Taking out of Altoch GP Dosing System of 100 litres from pump foundation after disconnection from lectrical panel and transporation to workshop, dismantling the following parts:Doser pump 0.9 Amp, 250 volts 100psi, Doser motor 0.8 Amp,220 volts,PVC pipe connection inlet to Doser and outlet to Doser, cleaning of doser tank all as per required and directed by Engr-in-charge.Note: (a) Defective items if replaced shall be measured and paid under relevant item.
269	Supply only against item no 268 above chemical dosing pump as per existing make
270	Supply only against item no 268 above electric motor as per existing make
271	Supply only against item no 268 above nozzle injector as per existing make
272	Supply only against item no 268 above electric stirrer as per existing make
273	Supply only against item no 268 above suction lance with foot valve as per existing make
274	S&F in replacement of CI foot valve, flanged end and drilled of size 80mm dia ISI marked.
275	Fire Hydrant
276	Taking down unserviceable landing valve type A, B
277	Taking down unserviceable branch pipe gun metal 63mm.
278	Taking down unserviceable hose box
279	Taking down unserviceable hose pipe
280	Taking down unserviceable fire hydrant/ yard hydrant post/ stand post80mm dia
281	Taking down unserviceable gun metal butterfly valve 100mm dia
282	Taking down unserviceable gun metal butterfly valve 150mm dia
283	Taking down unserviceable branch pipe gun metal 63mm.strainer for suction 100 mm dia
284	Taking down unserviceable fire brigade inlet connection 2 way
285	Taking down unserviceable sprinkler glass bulb type
286	Taking down unserviceable pipe support for all type of pipes incl hangars/ fastners/ elbows/ supports/ tees
287	M&L of Gun metal fire hydrant landing valve type A (single head outlet) of 63 mm dia conforming to IS 5290 completeall as specified and directed.
288	M&L forGun Metal fire hydrant landing valve type B ( double head outlet) of 63 mm dia conforming to IS 5290 completeall as specified and directed.
289	M&L for Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm/12.5mm bore nozzle short conforming to IS 903 completeall as specified and directed.
290	M&L for hose box of hose reel drum of 20 mm size of 30 meter length complete with coupling branch pipe and nozzle , Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard completeall as specified and directed.
291	M&L for 63mm dia 15 meter long hose pipe conforming to IS 636 complete with Gun metal male and female coupling conforming to IS 903 completeall as specified and directed.
292	M&L for fire hydrant/ Yard hydrant Post / Stand Post 80mm Dia GI / MS both flanged type 2.0 m Height conforming to IS 908 completeall as specified and directed.
293	M& L for Gun metal butterfly valve 100 mm dia bore hand operated of pressure not less than 15 Kg / Sqcm with complete set all as specified and directed.
294	All as per above of item no 293 but 150mm dia
295	M& L for Strainer of Suction 100 mm dia complete set all as specified and directed.
296	M& L for Fire brigade inlet connection 2way complete set all as specified and directed.
297	M& L for Sprinkler glass bulb type (Standard response) as per IS:15106/TAC guidelines 68 degree temperature rating pendent type
298	M& L for Pipe Support for all types of pipes including hangars / fastners / elbows/ supports / tees
299	M & L for Add if fixed in repairs of Fire hydrants 65mm dia with single flanged end, \"pit\" pattern, including labour for jointing only one flanged joint. completeall as specified and directed.
300	M & L for Add if fixed in repairs of Fire hydrants 65mm dia with single flanged end Pillar pattern fire hydrant, ditto.completeall as specified and directed.
301	Taking out of Jockey pump set 15 HP from foundation after disconnection from motor and transportation to workshop , dismantling the pump for repair/ overhauling including cleaning of all parts of pump assembly throughly, including machine work of pump shaft inorder to obtain smooth finish including necessary polishing etc and transporting to MES pump huse, fitting on foundation, using heliumgasket sheet not less then 1mm thick & to the entire satisfaction ofEngr-in -Charge. all as specified and directed. Note:- (i)Spare partsas required shall be measure & paid seperately against the relevant items.
302	Supply only against item no. 301 above Impellar
303	Supply only against item no. 301 above Mechanical Seal
304	Supply only against item no. 301 above Coupling
305	Supply only against item no. 301 above Shaft
306	Supply only against item no. 301 abovebearing
307	Taking out of Jockey Motor 15 HP from foundation after disconnection from Pump and transportation to workshop , dismantling the Motor forRewinding Jockey motor set 15 HP with super enamelled copper winding wire with appropriate same gauge of exsisting coil with similar class of exsisting insulation as recommended by manufacturer with high quality normex insulating paper applying best quality insulating varnish on stator/rotor windings drying them completely, testing the insulationsto the entire satisfaction ofEngr-in -Charge. all as specified and directed.
308	S&F MCCB 3 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA complete all as specified and directed.Make : Havells
309	S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed.Make : Havells
310	S & F MCCB 3 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed.
311	M & L for rubber insullating rectangular shape mat confirming as perIS 15652 of 6mm thickness, 914 mm X 914 mm X10 mm size. High electrical insulation resistance 10,00,000 mcga ohm, 100% shock proof under leakage current 10 mA with Fire Retardant and High dielectric strength of 45Kv for 1 minute &.Washable – Easy to clean etc all as per existing rubber mat suitable for electrical panel at pump house, COD and 506 ABW area all as specified and directed by Engr-in-Charge.
312	M&L for repair/replacement of stone masonry valve pit of size 45x45x45 cm (internal dimension) including all excavation PCC work, earth work and disposal of soil to a distance not exc 50 mtr and depositing where directed by Engr-in-Charge including plasteringinternally and pointing to wall externally as work proceeds including m.s sheet cover 3.15 mm thick and angle iron frame suitable size handle locking arrangement and painting to steel surface complete all as specified and directed by Engr-in-Charge.
313	Schedule of credit amount of Rs. 4,77,548.50 to be deducted during AOC

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Madhya Pradesh Tenders

Distribution and Conditioning Tenders

Pumps Tenders

Submersible Pump Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Comprehensive Repair/Replacement And Maint Centrifugal, Monoblock, Submersible Pump Sets, Sluice Valves, Gate Valve, Day To Day Repair/Replacement Complaints For Water Supply Lines For Otm And Md Accn And Repair Of Motor, Pipeline Of Fire, Jabalpur-Madhya Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Comprehensive Repair/Replacement And Maint Centrifugal, Monoblock, Submersible Pump Sets, Sluice Valves, Gate Valve, Day To Day Repair/Replacement Complaints For Water Supply Lines For Otm And Md Accn And Repair Of Motor, Pipeline Of Fire, Jabalpur-Madhya Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us