Tender For Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material With All Lifts And Upto 50 M Lead Etc. Complete As Per Direction Of The Engineer- In-Charge:- Nominal Concrete 1:4:8 Or Leaner Mix (I/C Equivalent Design Mix) , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area 3 Sqm And Below. , Dismantling Gs Sheet Roofing Including Ridges, Hips, Valleys, Gutters Wind Ties Etc. Including Dismembering And Stacking Of Serviceable Materials And Unserviceable Materials Separately With All Lifts And Upto A Lead Of 50 M Etc.Complete As Per Direction Of The Engineer- In-Charge. , Single Bamboo Palasiding/Walling Of Whole 2Nd Class Bamboo (Jati Or Bethua) 65 To 75 Mm Dia And Closely Packed & Driven @ 150 Mm C/C Including Fitting Fixing With Half Bamboo Kamis Horizontally In Three Rows With Cane Or Tying With Wire Complete And Struts 1.5 M Apart Longitudinally And Providing Bitumen Drum Sheet Walling Fixed With Nails As Per Drawing And Mord Technical Specification Clause 1302.5. A) B) Driven At Least 900 Mm Below Ground And 1200 Mm Above Ground On Average , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil , Banking Excavated Earth In Layers Not Exceeding 20 Cm. In Depth, Breaking Clods, Watering, Rolling Each Layer With ½ Tonne Roller, Or Wooden Or Steel Rammers, And Rolling Every 3Rd And Top-Most Layer With Power Roller Of Minimum 8Tonnes And Dressing Up, In Embankments For Roads, Flood Banks, Marginal Banks, And Guide Banks Etc., Lead Upto 50 M And Lift Upto 1.5 M. All Kinds Of Soil , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering - -All Work Upto Plinth Level: 1:2:4 ( 1 Cement: 2 Fine Sand : 4 Graded Well Burnt Brick Aggregate 40 Mm Nominal Size) , Providing Corrugated G.S. Sheet Roofing Including Vertical/Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead And Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/ Vertical Or Curved Surfaces) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required Etc. Complete As Per Direction Of Engineer-In-Charge. 0.63Mm Thick With Zinc Coating Not Less Than 275Gm/M2 , Providing Ridges Or Hips Of Width 60 Cm Overall Width Plain G.S. Sheet Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Dia G.I. Limpet And Bitumen Washers Etc. Complete As Per Direction Of Engineer-Incharge. 0.63Mm Thick With Zinc Coating Not Less Than 275Gm/M2 , Providing And Fixing Angle Iron Frames For Doors, Windows And Ventilators Of Mild Steel Angle Sections Of Size 35X35x5 Mm, Joints Mitred And Welded By Angle Iron 35X35x5 Mm Or 35X 5 Mm Flat Pieces To The Existing Tiron Frame Or To The Wall With Dash Fastener, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer, All Complete As Per The Direction Of Engineer-In-Charge. , Half Brick Masonry Work With First Class Bricks In Superstructure Upto Floor Five Level Including Cost Of All Materials As Required Complete:- In Cement Mortar 1:4 ( 1 Cement : 4 Fine Sand ). , Making The Opening In Brick Masonry Including Dismantling In Floor Or Walls By Cutting Masonry And Making Good The Damages To Walls, Flooring And Jambs Complete, To Match Existing Surface I/C Disposal Of Mulba/ Rubbish To The Nearest Municipal Dumping Ground, All Complete As Per Directions Of Engineer-In-Charge. For Door/ Window/ Clerestory Window , Providing Wood Work In Frames Of Doors, Windows,Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position : Local Teak Wood , Providing And Fixing Panelled / Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Including Isi Marked Bright Finished / Black Enamelled M.S Butt Hinges With Necessary Screws Excluding Panelling And Or Glazing, Which Will Be Paid For Separately But Including The Wooden Beading Of 20 × 12 Mm For Fixing Panelling And Or Glazing As Per Direction Of Engineer-In-Charge. Gamair Wood 35 Mm Thick Shutters , Repairs To Plaster Of Thickness 12 Mm To 20 Mm In Patches Of Area 2.5 Sqm And Under Including Cutting The Patch In Proper Shape And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground With All Leads And Lifts Including Finishing Even And Smooth And Curing Complete As Per Direction Of The Engineer In Charge:- With Cement Mortar 1:4 ( 1 Cement : 4 Fine Sand ). , Providing And Fixing Precast Chequered Cement Concrete Tiles 18 Mm Thick, Laid In Footpath & Courtyard, On 20 Mm Thick Bed Of Cement Mortar 1 : 4 ( 1 Cement : 4 Fine Sand ) Jointed With Neat Cement Slurry Including Rubbing And Cleaning Etc. All Complete As Per Direction Of Engineer-In-Charge. In Dark Shade Using Ordinary Cement , Providing And Fixing Hard Drawn Steel Wire Fabric Of Size 75 X25 Mm Mesh Or Other Suitable Size Wire Mesh To Be Fixed & Firmly Anchored To The Concrete Surface By Means Of L Shaped Mild Steel Shear Key Welded With Existing Reinforcement Including The Cost Of Materials, Labour, Tool & Plants, As Required And As Per Direction Of The Engineer-In-Charge. , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi : 12701 Marked With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. , Providing And Fixing G.I. Pipes Of Medim Class As Per Is : 1239 With Latest Amendment Complete With G.I. Fittings Including Trenching And Refilling Etc. Complete As Per Cpwd Specification And Direction Of The Engineer - In - Charge. External Work 32 Mm Dia. Nominal Bore , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement ,Trenching ,Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. External Work 20 Mm Nominal Outer Dia .Pipes. , Making Connection Of G.I. Distribution Branch With G.I. Main Following Sizes By Providing And Fixing Tee, Including Cutting And Threading The Pipe Etc. Complete As Per Cpwd Specification And Direction Of The Engineer - In - Charge. 25 To 40 Mm Nominal Bore , Providing And Fixing Brass Bib Cock Of Approved Quality : 15 Mm Nominal Bore , Distempering With 1St Quality Acrylic Washable Distemper (Ready Mixed) Of Approved Brand And Manufacture And Of Required Shade And Colour Complete As Per Manufacurers Specification On New Work ( Two Or More Coats ). [Payment Shall Be Made After Submission Of Test Certificate Issued By The Manufacturer] New Work ( Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer. , Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicon Additives Of Required Shade Of Approved Brand And Manufacture [Payment Shall Be Made After Submission Of Test Certificate Issued By The Manufacturer] : New Work ( Two Or More Coats Applied @ 1.43 Litre/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) , Finishing With Epoxy Paint ( Two Or More Coats) Of Approved Brand And Manufacture At All Locations Prepared And Applied As Per Manufacturers Specification Including Appropriate Priming Coat, Preparation Of Surface Etc. Complete [Payment Shall Be Made After Submission Of Test Certificate Issued By The Manufacturer]. On Steel Work
