Certain B/R Repairs Tomd/ Otm Accn In Sector A And B Under Age B/R Fatehgunj. - Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each & removing complete. 2 Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each & removing complete. 3 Taking down shutters of any descriptionexc 1 sq. m n exc 2 sq.m each complete 4 Taking down shutters of any descriptionexc 2 sq.m each complete 5 S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. 6 S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. 7 M & L for 5.5mm thick sheet glass, exc 0.5 Sqm ordinary quality and glazing with rubber beading or with glazing clips, all as specified and directed. 8 M & L for 4 mm thick sheet glass, n. exc 0.5 Sqmfigured quality and glazing with rubber beading or with glazing clips, all as specified and directed. 9 S&F in repairs aluminium (Extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete. Make: Dyna and equivalnt ISI marked. 10 S & Fin repairs double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed. 11 S&F for Framed work as in doors orgates or grill/grating of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeall as specifed and directed. 12 M&L for two coats of synthetic enamel paint over a coat of pink primer of new wooden surfaces of any description, not otherwise descri-bed over 10cm width or girth complete. 13 S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples complete all as specified and directed. 14 S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples complete all as specified and directed. 15 M & L for Hacking out old broken glass Exc 1.5 sqm (any thickness, size, quality or description) from wooden/steel/aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. 16 S & F 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane 17 M & L for 100 mm butt hinges stainless steel grade 202, 14 gauge thickness medium weight fixed with pressed steel door frame / pvc door frame with screws. 18 S&F 300mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed. 19 S & F solidPVC door frame of size 50mmx47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing.The door frame shall be tied to the wall using 75/100mm long MS screw as directed. 20 S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails.M S tube for top and bottom rails MS frame shall be covered with heat mouldedcolour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam colour PVC sheet for top rail, lock rail and bottom rail, panelling of single side prelamcolour PVC sheet to be fitted in the MS frame welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement. 21 M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated typeon one side and white on another side (factory laminated), or surface finish, 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE. 22 S&F 2nd class Hard wood 35mm thick glazed & skeleton door shutters open rebated & prepared to receive glass, gauze etc, divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and miterd beds securing glass, sizes of members of shutters as specified in SSR part -I, section 8, clause 8.20(a) and fitted to chowkats. 23 M&L for two coats of synthetic enamel paint over a coat of pink primer of new wooden surfaces of any description, not otherwise descri-bed over 10cm width or girth complete. 24 S&F 100 mm long safety type aluminium anodised hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. 25 S&F 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed. 26 S & F 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed, all as specified. 27 S & F 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed, all as specified. 28 Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling etc. all as specified and directed. 29 M &L for Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 mmean radius built in CM 1:6 30 Taking down cement plaster on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc complete 31 M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfacesand surface finished even and smooth without using extra cement all as directed. 32 M & L for rendering 5mm thick on brick wall surface or concrete surfaces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement) 33 M&L Rendering in two layer onfair faces of brick work or concrete surfaces of wall 5 mm thick in CM 1:4 mixed with WPC@ 3% by wt of cement for finished even and smooth without using extra cement over 10 mm thick rendering incement mortar 1:6smooth without using extra cement (WPC will be measured separately). 34 Supply only Integral water proofing compound 35 M&L for preparingnew plastered surfaces of ceiling and applying three coats of white wash on ceiling. 36 M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distamper over and including a coat of 3mm average thick birla/equivalent wall care putty and one coat ofprimer allas specified and as directed. 37 M&L for preparingnew plastered surfaces of wall and applying twocoats cement base paint over a coat ofprimer. 38 M & Lfor preparingold plastered surfaces of wall and applying two coats cement base paint on external wall. 39 M & Lfor preparingold plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified. 40 Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level) 41 M&L for 75 mmthick PCC 1:4:8 mix ,type D-2 Using 40 mm graded stone aggregatewithout using extra cement as in sub base of path/hard standing 42 M&L for 75 mmthick PCC 1:2:4 mix ,type B-2 Using 40 mm graded stone aggregate finished even and fair without using extra cement as in path/hard standing/ flooring 43 M&L for PCC 1:3:6type C-1 , 75 mm thickas in plinth protection, Path, floor complete all as specified and directed. 44 Dismantling floor, hearth or wall tilingof any description and in any positionincluding cement mortarbedding (but not backing) complete all as specified and directed. 45 M&L fornon skid colour ceramictile 7 to 8mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match screed bed or bedding layer of mortar including 15mm thick for laying floor finishes withCM 1:6. 46 M&L fornon skid colour ceramictile 7 to 8mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfacesin CM 1:4 to receive wall tiles. 47 M&L for coloured (of any shade) vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile n.exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor fiishes with CM 1:6 complete. 48 M&L for coloured (of any shade) vitrified ceramic tiles 10 mm thick as in skirting (square/ rectangular) polished, area of each tile n.exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfacesin CM 1:4 to receive wall tiles. 49 M&L for Glazed ceramic coloured walls tilesin vertical surfaces 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfacesin CM 1:4 to receive wall tiles. 50 M&L forGreen Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble to match screed bed or bedding layer of mortar including 15mm thick for laying floor finishes withCM 1:6. 51 M & L chequered cement concrete tile 20cm x 20cm x 25mm thick with grey colour and pigmentset and jointed in neat cement slurryincluding screed bed or bedding layer of mortar 15mm thick for laying floor finishes withCM 1:6 52 M&L for Machine pressed, precast plain cement concrete Interlocking paver block, factoty made( with grey cement and no pigment) conforming to IS-15658-2006, 60mm thickness laid over and including 25 mm average thick sand cushioning layer & joints filled with sand in hardstanding etc, fabricated withM-35 grade concrete, complete. 53 Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed. 54 S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ150 as in roof covering/ cladding to wall, fixed with self tapping screws as specified. 55 S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ150as in roof covering/cladding ridge or hips, valley gutter to wall, fixed with self tapping screws as specified. 56 Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground posts embedded in concrete, brick masonary etc complete. 57 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete. 58 M & L for mild steel work confirming to Fe-290 Gde E-165 in angle iron posts & struts for shed and for grills including cutting top to shape as directed, drilling holes, notching for wire, etc. and including flat iron filletes for securing wire mesh or fence etc. including allnecessary bolting riveting etc complete. 59 S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled sectionas in roof truss, frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. 60 M & L for preparing newsteel surface of any description not otherwise described over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer. 61 S & F20 mm outer dia (internal 16mm dia) CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land complete all as specified and directed 62 Taking up or down GI tubing 20mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed. 63 S&F steel tubing 20 mm bore of medium grade galvanised, with all fitting; laid in trenches and connections in new position (walls, ceiling, floor etc) complete all as specified and directed. 64 Taking up or down GI tubing 25mm or 32mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed. 65 S&F steel tubing 25 mm bore of medium grade galvanised, with all fitting; laid in trenches and connections in new position (walls, ceiling, floor etc) complete all as specified and directed. 66 M&L in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete type B1, 1:2:4 for 75mm bore. 67 S&F in repair 600mm x 450mm beveled edge mirror 5 mm thick of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium beading. 68 S & F in repairs plastic seat white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device 69 S & F in repairs Vitreous China wash down water closet pan pedestal pattern (Europian type) (excluding flushing cistern and flush pipe) plastic seat black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device. 70 S & F in repairs PVC valvless syphonic action flushing cistern low level white of 10ltrs capacitywith inlet ball valve float and handle including bracket. 71 S&F in repairs health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. 72 S&Fin repairs PVC connection 600mm long of dia 15mm complete. 73 S&F in repair Vitreous China wash hand basin, angle back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including CI bracket and nut bolts as per maufacturers instructions. 74 S&F 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgf/cm2 as in waste pipe 75 S&F in repair SS waste coupling of 32mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed. 76 S&F in repairs 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed 77 S&F in repairs 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed 78 S&F in repairs 110 mm dia PVC (SWR) bends of any radius with access door complete 79 S&F in repairs 75 mm dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with oval access door complete. 80 S & F in repairs stainless steel curtain rod with socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed 81 S&F in repairs including disconnecting tanks, 1000 ltrs rotational moulded triple layered, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as directed. 82 S&F in repairs including disconnecting tanks, 500 ltrs rotational moulded double layred, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. 83 S&F disconnecting existing tanks exc 250 ltr but n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. 84 S&F disconnecting existing tanks exc 500 ltr but n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. 85 S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 142 gms) complete all as specified and directed. Make : Prayag & equivalent. 86 All as per item No 102 here in before but 25mm dia complete all as specified and directed. Make :Prayag & equivalent. 87 S&F in repair Ball brass valves , high pressure ,withpolythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. 88 S&F in repair Ball brass valves , high pressure ,withpolythene float and fly nut complete & high-density plastic ball , suitable for 25 mm bore pipe, screwed for iron pipe and fixed. 89 S&F in repairs 15mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle for iron pipe 90 S&F in repairs, bib taps fancy type chromium plated 15mm bore cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. 91 S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capston heads, chromium plated fancy type, (swan neck)screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. 92 S&F in repairs chromium plated shower rose with or without swivel joints any size, including fixing to GI pipe for 125mm dia complete all as specified & directed. 93 S&F in repairs brass CP centre hole basin mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete. 94 S&F in repairs brass CP wall mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete. 95 S&F in repairs, towel rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. (Make: Jaquar or equivalent) 96 S&F in repairs, 20 mm dia, D type, CP towel rail 60 cm long between flanges complete all as specified and directed. 97 M&L Granite (Black colour superior quality) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtureof pigment to match complete all as specified and directed.
