Procurement Of Materials Required For The Annual Maintenance Of The Drinking Water Supply Department Within The Jurisdiction Of Malebennur Municipality - Solvent Cement Adhesive01,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Back Nut/ Check Nut Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any. For 80 Mm Dia Gi Back Nut/ Check Nut,Bolts / Nuts / Washers ( Ms General Purpose ) Water Resources Department Sr 2023-24 Volume-4 Part I Sl No 07 Page - 17,Providing, Laying And Fixing Of Gi Pipes Conforming To Is 1239 1990 With Latest Amendments Complete With Gi Fittings (Excluding The Cost Of Fittings) With Cuts And Threads Wherever Necessary, Including Testing For Water Tightness, With All Lead And Commissioning. (Contractor Will Make His Own Arrangements For Procuring Water For Testing) Forheavy Duty Gi Pipe Etc. Complete Heavy Duty Gi Pipe Of 65Mm Dia,Providing, Laying And Fixing Of Gi Pipes Conforming To Is 1239 1990 With Latest Amendments Complete With Gi Fittings Excluding The Cost Of Fittings With Cuts And Threads Wherever Necessary, Including Testing For Water Tightness, With All Lead And Commissioning. Contractor Will Make His Own Arrangements For Procuring Water For Testing Forheavy Duty Gi Pipe Etc. Complete Heavy Duty Gi Pipe Of 50Mm Dia,Providing Laying And Fixing Of Gi Pipes Conforming To Is 12391990 With Latest Amendments Complete With Gi Fittings Excluding The Cost Of Fittings With Cuts And Threads Wherever Necessary Including Testing For Water Tightness, With All Lead And Commissioning. Contractor Will Make His Own Arrangements For Procuring Water For Testing For Heavy Duty Gi Pipe Etc. Complete Heavy Duty Gi Pipe Of 40 Mm Dia,Supply And Delivery At Site Special Moulded Variety Pvc Reducer As Per Is And Fabricated As Per Ig124 1984 With Isi Mark With Its Latest Amendments 75Mm Dia Pvc Reducer,Supply And Delivery At Site Special Moulded Variety Pvc Reducer As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 63 Mm Dia Pvc Reducer,Providing, Fabricaing And Fixing At Site Various Diameters Of Ms Flanges As Per Is Standards To Fix Sluice Valves As Per Sketch. The Rate To Include Cost Of All Materials, Labour, Consumables, Hire Charges For Tools And Tackles, Weldiing Equipments Etc. Complete As Per Instructions Of The Engineer In Charge For Flanges Of 100Mm Dia And 10Mm Thick,Supply And Delivery At Site Brand New Best Make Starter/ Control Panel Suitable For Following Hp Centrifugal Pump Confirming With Isi Mark And Its Latest Amendments.Upto 7.5 Hp Centrifugal Pump),Supply And Delivery At Site Brand New Best Make Pvc Insulated Cable Of Flat 3 Core (Sheathed) Of Nominal Cross Sectional Area As Per Is 694-1990 With Isi Mark And As Per Its Latest Amendments 1X3x4 Sqm Cable (Suitable For Over Head Mains),Supply And Delivery At Site Brand New Best Make Pvc Insulated Cable Of Flat 3 Core (Sheathed) Of Nominal Cross Sectional Area As Per Is 694-1990 With Isi Mark And As Per Its Latest Amendments 1X3x2.5 Sqm Cable,Providing Submersible Pump Set Of 150Mm Dia Suitable For Bore Well And Confirming To Is 8034-2000 3Phase, Ss Bowl Impeller With Low Volt Motor As Per Specifications, To Work Site As Per Necessary Ammendments And Instructions Of Engineer Incharge Of The Work 2.00 Hp1 5Kw 12 Stg,Providing Submersible Pump Set Of 150Mm Dia Suitable For Bore Well And Confirming To Is 8034-20003Phase, Ss Bowl & Impeller With Low Volt Motor As Per Specifications, To Work Site As Per Necessary Ammendments And Instructions Of Engineer Incharge Of The Work 3.00 Hp - 90 Lpm 66 M 10 Stg Outlet Dia -2 00,Providing Submersible Pump Set Of 150Mm Dia Suitable For Bore Well And Confirming To Is 8034 2000 3Phase, Ss Bowl Impeller With Low Volt Motor As Per Specifications, To Work Site As Per Necessary Ammendments And Instructions Of Engineer Incharge Of The Work 5.00 Hp - 245 Lpm 56 M 8 Stg Outlet Dia 2.50,Supply Of Gunmetal Non-Return Valve-Vertical (Screwed End) 65 Mm Dia,Supply Of Gunmetal Non-Return Valve-Vertical (Screwed End) 50 Mm Dia,Supply Of Gunmetal Non-Return Valve-Vertical (Screwed End) 40 Mm Dia,Supply Of Ppr Double Union Ball Valveconfirming To Is 15801-2008 And Din Standards 8077/8092Double Union Ball Valve 40Mm,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Union Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any.50 Mm Dia Gi Union,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Union Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any.40 Mm Dia Gi Union,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Union Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 32 Mm Dia Gi Union,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Elbow Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any For65 Mm Dia Gi Elbow,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Elbow Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any For 50 Mm Dia Gi Elbow,Supply And Delivery At Site Special Moulded Variety Pvc Service Saddle As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments63 Mm Dia Pvc Service Saddles,Supply And Delivery At Site Wrought Middle Steel Galvanized Gi Elbow Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any For40 Mm Dia Gi Elbo,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Elbow Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any For32 Mm Dia Gi Elbow,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Bend Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any65 Mm Dia Gi Bend,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Bend Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 50Mm Dia Gi Bend,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Bend Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 40Mm Dia Gi Bend,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Bend Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any25 Mm Dia Gi Bend,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Tee Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any.65Mm Dia Gi Tee,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Tee Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any50mm Dia Gi Tee,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Tee Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any.40Mm Dia Gi Tee,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Hexagonal Nipple Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any.80Mm Dia Gi Hexagonal Nipple,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Hexagonal Nipple Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any.65 Mm Dia Gi Hexagonal Nipple,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Hexagonal Nipple Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any.50 Mm Dia Gi Hexagonal Nipple,Supply And Delivery At Site Wrought Middle Steel (Galvanized) Gi Hexagonal Nipple Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any.40 Mm Dia Gi Hexagonal Nipple,Providing Wrought Mild Steel (Galvanized) Gi Collar Confirming To Is 1239-Ii, 1991 With Latest Amendments If Anyfor 80 Mm Dia Gi Collar,Providing Wrought Mild Steel (Galvanized) Gi Collar Confirming To Is 1239-Ii, 1991 With Latest Amendments If Anyfor65 Mm Dia Gi Collar,Providing Wrought Mild Steel (Galvanized) Gi Collar Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any For 50 Mm Dia Gi Collar,Supply And Delivery At Site Special Moulded Variety Pvc Service Saddle As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments75 Mm Dia Pvc Service Saddles,Supply And Delivery At Site Special Moulded Variety Pvc Service Saddles As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments50 Mm Dia Pvc Service Saddles,Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 90 Mm Dia,Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 75Mm Dia Pvc Tee,Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 63Mm Dia Pvc Tee,Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 50Mm Dia Pvc Tee,Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 40Mm Dia Pvc Tee,Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834/ 1987 And Fabricated As Per Ig124/ With Isi Mark With Its Latest Amendments 32 Mm Dia,Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 25 Mm,Supply And Delivery At Site Special Moulded Variety Pvc Bend As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 110 Mm Dia Pvc Bend,Supply And Delivery At Site Special Moulded Variety Pvc Bend As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 90 Mm Dia Pvc Bend,Supply And Delivery At Site Special Moulded Variety Pvc Bend As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 75Mm Dia Pvc Bend,Supply And Delivery At Site Special Moulded Variety Pvc Bend As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 63Mm Dia Pvc Bend,Supply And Delivery At Site Special Moulded Variety Pvc Bend As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 50 Mm Dia Pvc Be,Supply And Delivery At Site Special Moulded Variety Pvc Bend As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 40 Mm Dia P,Supply Of Ppr Ball Valve Plastic (Heavy Body) Confirming To Is 15801- 2008 And Din Standards 8077/8092 Ppr Ball Valve Plastic (Heavy Body) 63Mm,Supply Of Ppr Ball Valve Plastic (Heavy Body) Confirming To Is 15801- 2008 And Din Standards 8077/8092 Ppr Ball Valve Plastic (Heavy Body) 50Mm,Supply Of Ppr Ball Valve Plastic (Heavy Body) Confirming To Is 15801- 2008 And Din Standards 8077/8092 Ppr Ball Valve Plastic (Heavy Body) 40Mm,Supply Of Ppr Ball Valve Plastic (Heavy Body) Confirming To Is 15801- 2008 And Din Standards 8077/8092 Ppr Ball Valve Plastic (Heavy Body) 32Mm,Supply And Delivery At Site Special Moulded Variety Pvc Elbows As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments110 Mm Dia Pvc Elbows,Supply And Delivery At Site Special Moulded Variety Pvc Elbows As Per Is And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 90 Mm Dia Pvc Elbows,Supply And Delivery At Site Special Moulded Variety Pvc Elbows As Per And Fabricated As Per Ig124/ With Isi Mark With Its Latest Amendments 75 Mm Dia Pvc,Supply And Delivery At Site Special Moulded Variety Pvc Elbows As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments63 Mm Dia Pvc Elbows Tmc,Supply And Delivery At Site Special Moulded Variety Pvc Elbows As Per Is 7834/ 1987 And Fabricated As Per Ig124/ 1984 With Isi Mark With Its Latest Amendments 50 Mm Dia Pvc Elbows,Supply Of Pvc Pipes Of 6 Kg/Cm2 For 110Mm(1.894),Supply Of Pvc Pipes Of 6 Kg/Cm2for 90Mm(1.313),Supply Of Pvc Pipes Of 6 Kg/Cm2 For 75Mm (0.917),Supply Of Pvc Pipes Of 6 Kg/Cm2 For 63Mm (0.662)
