Tender For Furnishing Work And Electrical Work Providing and fixing at site Aluminium Partition for the electrical panel as per the design and drawing. The carcass frame shall be made of 44 mm X 44 mm X 16 Gauge aluminium extruded sections , and cladded with cemented board 6 mm thick on one side. All stiles and rails for the open able shutters shall be made of 83 mm X 40 mm X 16 Gauge aluminum extruded sections and cladded with cemented board 6 mm thick .The shutters shall be mounted on the hinges .The cabinet shall be complete with all necessary hardware’s like locks, handles, catchers, tower bolts etc. The cemented board shall be finished with 2 coats of of primer putty filling to desired smoothness and finished with two coats of plastic paint of desired shade and colour on all internal surface. All the outer visible surface shall be finished with 1.0 mm thick laminate of approved color and shade using the recommended adhesive
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.