Tender For Repair/ Maintenance Of Ci/ Gi Pipe Line And Other Connected Work At Saharanpur Under Ge (Mes) Roorkee., roorkee-Uttarakhand

Tender For Repair/ Maintenance Of Ci/ Gi Pipe Line And Other Connected Work At Saharanpur Under Ge (Mes) Roorkee.; 1 Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for ducting and laying in LT underground cable/ GI Pipe in any type of soil complete all as specified and directed 2 Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed. 3 Removing surplus spoil to a distance not exceeding 50 meter and depositing where directed at a level not exc. 1.5 meter above the starting point complete all as specified and directed. 4 Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for finding of the cable fault in LT underground cable and returning filling (including reusing old bricks and sand) the same after rectification of the cable fault in any type of soil complete all as specified and directed 5 Cutting of existing CI pipe in position for inserting of tee, bend collar other type of CIfitting for addition /alternation of existing system for following sizes :- 6 80mm bore 7 100 mmbore 8 150 mm bore 9 200 mm bore 10 Drilling and taping cast iron water mains (in position) for branch connections forfollowing size :- 11 15 mm 12 20 mm 13 Taking out CI pipe any type including fittings with spigot and socketed end centrifugally cast laid in trenches of following sizes :- 14 80 mm bore 15 100 mmbore 16 150 mm bore 17 200 mm bore 18 Supply and lay in trenches in replacement of Ductile iron pipes K-9 Spigot and Socketed ends, centrifugally cast suitable for tyton joint in different lengths including rubber tyton joint complete, confirm IS 12288 & 8329 as per site condition of following sizes all as specified and directed. 19 80mm bore K-9 21 20 100 mmboreK-9 21 150 mm bore K-9 22 200 mm bore K-9 23 M&L for repairing leakages of CI pipes with spigot and socket ends, de-watering of pipe lines and trenches, burning out joints to recover lead and making new lead joint with retrieved material and any additional quantity of lead required as per site requirement complete including all other materials such as spun yarn, fire woodetc and testing complete all as specified of the following sizes (Excavation and earth work shall be measured and paid seperately):- 24 80 mm bore 25 100 mm bore 26 150 mm bore 27 200 mm bore 28 M&L for cocking of run lead wool joint for spigot and socketed pipes and fittingscompleteall as specified and directed of following sizes :-(Excavation and earth work shall be measured and paid seperately):- 29 80 mm bore 30 100 mmbore 31 150 mm bore 32 200 mm bore 33 Taking out, sluice valve top cover, spindle and broken / unsv check nut (gutka)carry to workshop & re-fixing ofsluice valve after servicing /maintenance /grinding / cleaning / threading / greasingwork to sluice valve parts, including replacement of gland packing, rubber sheet, nut, bolt, Spindle ,check nut and washer of existing size complete all as specified and directed, of following size:- 34 80 mm bore 35 100 mm bore 36 150mm bore 37 200 mm bore 38 S&F bib taps 15 mm bore, Bib taps, cast iron with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. 39 Taking up or down (from wall/trenches/floor) existing GI steel tubingand connections, including cleaning for re-fixing or removal to storeof following sizes:- 40 100 mm bore GI pipe 41 80 mm bore GI pipe 42 50 mm bore GI pipe 43 40 mm bore GI pipe 44 25 mm bore GI pipe 45 20 mm bore GI pipe 46 15 mm bore GI pipe 47 Refixing/ shifting of old steel tubing and connections in new or old position with major defectsincludingcleaning internally and externally, any grade/make in trenches/wall/floor/ceiling including all type of new fittings i.e. sockets, Tee union elbow etc allas specified and directed offollowing size:- 48 100 mm bore GI Pipe 49 80 mm bore GI pipe 50 50 mm bore GI pipe 51 40 mm bore GI Pipe 52 25 mm bore GI pipe 53 20 mm bore GI pipe 54 15 mm bore GI pipe 55 Supply, fixing & laying only GI tubing medium grade as per IS 1239 with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittingsfor laid in trenches/wall/ceiling/ floor/all as specified and directed of following size :- 56 100 mm bore GI pipe 57 80 mm bore GI pipe 58 50 mm bore GI pipe 59 40 mm bore GI Pipe 60 25 mm bore GI pipe 61 20 mm bore GI pipe 62 15 mm bore GI pipe 63 Cuttingexistingsteel tubing for alterations or additions (each cut measured), complete all as specified and directed by the Engineer-in-Charge, suitable for the following bore of pipes :- 64 15 mm bore GI pipe 65 20 mm bore GI pipe 66 25 mm bore GI pipe 67 40 or 50 mm bore 68 Screwing existing steel tubing for alterations or additions or to form connection, complete all as specified and directed for the following bore of pipes:- 69 15 mm bore 70 20 mm bore 71 25 mm bore 72 40/50 mm bore 73 Taking out UNSV Gun metal globe & S&F Gun metal globe or gate valves, confirm IS 778, with iron wheel head, screwed both ends for iron pipe and fixed infor following size:- 74 50 mm bore 75 40 mm bore 76 25 mm bore 77 20 mm bore 78 15 mm bore 79 Supply & FixGlobe / Ball / Stop valve cast copper alloy / gun metal screwed down high pressure with crutch or butterfly handle, screwed for iron pipe including dismantling the old US existing valve complete for the following sizes :- 80 15mm bore 81 20 mm bore 82 Material & Repairfor minor complaint of leakage & breakage of existing GI pipe linefor various size mentioned belowby highly skilled trades man and making functional including all necessary GI fittings (socket, union, elbow, nipple etc) complete all as specified and directed at site.(Note : - Excavation more than 1 mtr lengthwill be measured and paid separately under appropriate item.) of size 15 mm to 32 mm 83 All as per item above but of size 40 mm to 50 mm. 84 All as per item above but of size 80 mm to 100 mm. 85 Taking out and repairing the existing PPR pipe lines of size upto 25mm bore including with new fitting and necessary items.

INR 500 /-

INR 14.90 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB