Tender For Special Repair To Or Md Accommodation At Dc Line In Mil Stn Miran Sahib Under Ge Jammu; 1 Taking down Chowkats or frames n.exc 1.5 sq.meach with shutters (without taking off shutters from the frames) complete all as specified andas directed. 2 Taking down Chowkats or frames exc 1.5 sq.mbut n.exc 4 sqm each each with shutters (without taking off shutters from the frames) complete all as specified andas directed. 3 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified andas directed. 4 M&L for 15 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cementcomplete all as specified andas directed. 5 M&L for 5mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth with out using extra cement complete all as specified andas directed. 6 M&L Rendering 15mm thick on fair faces of brick/ concrete surfaces built in cm (1:4) , finished even and smooth with WPC without using extra cement complete all as specified andas directed. 7 M&L for preparation of surface and applying three coat of white wash on newly plaster surface of ceilingcomplete all as specified andas directed. 8 M&L for preparation of old plaster or painted surfaces of ceiling and applying two coat of white wash complete all as specified andas directed. 9 M&L for prepartion of new surface and applying two coat of oil bound distemper over coat of primer over new plaster surface over 1 mm thick putty including 1 coat of primercomplete all as specified andas directed. 10 M&L for complete removal of existing surface & prepartion of old surface and applying two coat of oil bound distemper over a coat of primer including 1 mm thick putty complete all as specified andas directed. 11 M&L forprepartion of new surface and applying two coat of exterior emulsion/weather proof paint over a coat of primer over and including 1 mm thick putty on plastered surfacecomplete all as specified andas directed. 12 M&L for complete removal of existing surface and prepartion of old surface and applying two coat of exterior emulsion/weather proof paint over a coat of primer over and including 1 mm thick putty on plastered surface complete all as specified andas directed. 13 M&L Rendering 20mm thick in CM 1:4 on concrete surface such as chajjas, upward fascias, roof surfaces and similar items including two or more dubbing coat,surface finished even and fair without using extra cementincl mixing of liquid water proofing compound (LWPC shall be measured & will be paid separately) upto height of four storeyed bldg with all necessary, formwork, scaffolding, lifting arrangement for external surface upto 4 storey buildings.) complete all as specified andas directed. 14 Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippingscomplete all as specified andas directed. 15 M&L for 75mm thick cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd .6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete all as specified andas directed. 16 S&F 100 mm size but hinges medium weight stainless steel cold rolled mild steel complete all as specified andas directed. 17 S&F 75 mm size but hinges medium weight cold rolled stainless steel complete all as specified andas directed. 18 S&F Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified andas directed. 19 S&F 35mm thick 2nd class hard wood factory made glazed andskeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars),edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified inSSR Part I, Section 8, clause 8.20complete all as specified andas directed. 20 S&F in repair box type steel windows/Ventilator (factory made) outer frame made out ERW tube P section 65X45X25 mm and shutter of ERW tube P section 50mmX35mmX20mm openable (double shutter) with glazed shutter on extrernal side and gauzed shutter on internal sideincluding steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 nos on each shutter stopper of Z section and its locking arrangementand mild steel hook and eyes suitable for fixing cooler /ACwindow complete all as specified and shown on drgs No CEPZTD-324/07 Sh 1/3 to 3/3 Note:- The quoted rate a shall also include (i). One shop coat of zincchromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface (ii) 4 nos MS steel lugs made of 20X5 mm Iron flat 200 mm long iii)10 mm Sq Bar grill/guard bar design as per drawing(iv) PCC block for embedding lugs (v) Two coat of synthetic enamel paint(vi)galvanised mild steel wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple complete all as specified andas directed. 21 S&F Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 105x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified andas directed. 22 S&F Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 125x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side including one coat of primer complete all as specified andas directed.. 23 Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 24 S & F 18 mm thick factory made 100 % solid WPC flush shutter (for cupboardand vanity etc)made from co-extruded three layer rigid foam sheet(single extruded) with 0.8 to 1 mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 kg/cum manufacturer by an ISO 9001/2015 certified company complete all as specified andas directed. 25 S&F modular auto concealed soft closed hinges 35mm, 110 degree size fixed to cupboard complete all as specified andas directed. 26 S & F in repair 18 mm thick factory made 100 % solid WPC flush shutter (for cupboardand vanity etc)made from co-extruded three layer rigid foam sheet(single extruded) with 0.8 to 1 mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 kg/cum manufacturer by an ISO 9001/2015 certified company complete all as specified andas directed. 27 S&F Factory made solid PVC moulded Door frame of size 50x100mm with wood free EPS and 2mm thick moulded PVC sheet alaround supplying and fixing in wall at site as per manufacturer complete all as specified andas directed. 28 S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified andas directed. 29 S&F magnet catcher 50 mm size for kitchen cupboard shutter complete all as specified andas directed. 30 S&F stainless steel handle 100mm fixedto cupboard complete all as spcired complete all as specified andas directed. 31 Dismantling wrought iron ormild steel work as in cooler stand etccomplete all as specified andas directed. 32 S&F Mild steel framed works such as grills, framed guard bars, etc and similar work as in cooler stands etc. conforming to Fe 410-0 or Fe 310-0 complete all as specified andas directed. 33 M&L for PCC 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregate as in back filling, bed block for hold fast etc complete all as specified and directed. 34 S&F Aluminium handles D type anodised 150 mm long ISI marked complete all as specified andas directed. 35 All as per item No 34 here-in-before but 125 mm long complete all as specified andas directed. 36 S&F 150 mm long aluminium anodised barrel tower bolt of extruted section ISI marked complete all as specified andas directed. 37 All as per item No 36 here-in-before but 200mm longcomplete all as specified andas directed. 38 S&F 300 mm long dia 12 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified andas directed. 39 S&F mild steel enamelled helical door spring 150 mm (ISI Marked)size including roller and roller plate, fixed to wooden/ steel frames by any means as requiredcomplete all as specified andas directed. 40 S&F galvanised mild steel wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple complete all as specified andas directed. 41 S&F 3mm thick sheet glass, orinary quality glazing with oil putty in suare not exceeding0.5 sqm in each pane complete all as specified andas directed. 42 All as per item No.41 above but figured glass, Pin head typecomplete all as specified andas directed. 43 M&L for preparing surface of new wood and wood based material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified andas directed. 44 M&L for preparing surface of new steel material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paintcomplete all as specified andas directed. 45 M&L for preparing old surface of steel material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint complete all as specified andas directed. 46 Demolition of concrete(unreinforced) in ground floors and pavings not exceeding15 cm thickness (below or above ground level) complete all as specified andas directed. 47 Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified andas directed. 48 M & L for Non skid tiles coloured exc 0.06 sqm and n.exc 0.11 sqm , 6-7mm thick of any colour pattern and 1st quality as approved by GE in floor set and fixed with 3-4 mm spacer set and jointed over neat 5-6 mm thick polymer modified tile adhesive of appropriate grade as per manufacturer instruction and provided with 3-4mm spacer, spacer gaps to be filled with approved epoxy grout, complete all as specified andas directed. 49 M&L for non skid ceramic coloured tiles 7 to 8 mm thick, edgeless, area of each tile exceeding 0.11 sqm but not exceeding0.18 sqm in floors etc set andfixed with approved tile adhesive polymer modified tile adhesive of appropriate grade as per manufacturer instruction and provided with 3-4mm spacer, spacer gaps to be filled with approved epoxy grout, complete all as specified andas directed. 50 All as per item No 49 here-in-before above but as in vertical surafce ,skirtingover andfixed with fixed with 3-4 mm spacer set and jointed over neat 5-6 mm thick approved tile adhesive polymer modified tile adhesive of appropriate grade as per manufacturer instruction and provided with 3-4mm spacer, spacer gaps to be filled with approved epoxy grout, complete all as specified andas directed. 51 M&L for coloured glazed ceramic tilesglossy finish of size 450x300x 5-6mm thick in dado’s/skirting etc (1st quality).set and fixed with 3-4 mm spacer set and jointed over neat 5-6 mm thick polymer modified tile adhesive of appropriate grade as per manufacturer instruction and provided with 3-4mm spacer, spacer gaps to be filled with approved epoxy grout complete all as specified andas directed. 52 M&L for 16 to 18 mm thick granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over and including 20 mm thick screed bed of CM 1:6 incl taking down old complete all as specified andas directed. 53 Providing edge moulding to 18-20mm thick Granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified andas directed. 54 Dismantling Stone slabs laid dry and tiles of any description or thickness in floors, aprons etc. and rubbish off the premises complete all as specified andas directed. 55 M&L for Machine cut kota stone slab flooring18-20mm thick as in floor to match the shade of the slab including 20 mm screed bed CM 1:6 including rubbing polishing complete all as specified andas directed. 56 M&L machine cut kota stone slab flooring 18-20 mm thick as in riser in step, skirting/ dado to match the shade ofthe slab incl rubbing and polishing over and including 10 mm rendering in CM 1:4complete all as specified andas directed. 57 Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified andas directed. 58 Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified andas directed. 59 S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified andas directed. 60 S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified andas directed. 61 S&F in repair 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted andfixed in position and including dismantling of water tank complete all as specified andas directed. 62 S&F in repair vitreous china squatting pan Orissa pattern, size 580x440 mm white, with integral foot rest and P or S trap and connection to flushing pipe, anti-syphonage pipe complete including provision of cement concrete bedding complete all specified in SSR part I complete all as specified andas directed. 63 S&F in repair vitreous chinacorner wash basin, white, flat back, size 400x380 mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, waste coupling cutting, waste pipe for and pinning in ends of brackts or erecting standcomplete all as specified andas directed. 64 S&F in repair PVC valveless, symphonic action type, flushing cistern, 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified andas directed. 65 S&F in repair low density PVC connections commercial quality 15mm bore with PTMT nuts of length 600 mm complete all as specified andas directed. 66 S&F in repair low density PVC waste pipe32 mm bore for flusing cistern complete all as specified andas directed. 67 S&F in repair 15 mm bore bib taps long nose/long body, cast copper alloy CP fancy type with capstan head handle screwed down,screwed for brass, weight not less than 450 gms ferrule and fixed complete all as specified andas directed.. 68 S&F in repairs Bib taps, fancy type chromium plated ( Short body) with crutch or butterfly handle,screwed down, screwed for iron pipe of 15mm dia boreincluding necessary fittings complete all as specified andas directed. 69 S&F in repair 15 mm bore Angle valves, cast copper alloy CP fancy type, half turn, screwed down, high pressure, with crutch or butterfly handle, weight not less than 450 gms screwed both ends for iron pipe or for unionscomplete all as specified andas directed. 70 S&F in repair 15 mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure, with capsgan head handle, weight not less than 450 gms screwed both ends for iron pipe or for unions complete all as specified andas directed. 71 S&F in repair 15 mm bore sawn neck pillar cockcast copper alloy, chromium plated with angular knob fixed to 15mm dia MS pipe complete with all fittings complete all as specified andas directed. 72 S&F in repairs 20 mm dia Gun metal, globe or gate valve with iron wheel head,screwed both ends for iron pipe complete all as specified andas directed. 73 S&F in repairs shower rose brass chromium plated with swivel joint of size 125 mm cast copper alloy CP fancy type withCP neck 9 long made to shape, weight not less than 350 gms complete all as specified andas directed. 74 S&F in repair looking mirror 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified andas directed. 75 Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)complete all as specified andas directed. 76 S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints , bends ,Tees complete fixed to walls at any heightcomplete all as specified andas directed. 77 S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints , bends ,Tees complete laid in trenches or in floors complete all as specified andas directed. 78 S&F 110 mm borePVC (SWR) pipes single socketed in any length with rubber ring joints , bends ,Tees complete fixed to walls at any height complete all as specified andas directed. 79 S&F 110 mm borePVC (SWR) pipes single socketed in any length with rubber ring joints , bends ,Tees completelaid in trenches or in floorscomplete all as specified andas directed. 80 S&F PVC (SWR) bends 110 mmradiuscomplete all as specified andas directed. 81 S&F 110 mm PVS(SWR) Junction single(T) equal/Unequalcomplete all as specified andas directed. 82 S&F PVC (SWR) bends/shoes any radiusof 75 mm dia complete all as specified andas directed. 83 S&F PVC (SWR) bends any radius provided with access door of 110mm diacomplete all as specified andas directed. 84 All as per item No83 above Above but 75 mm diacomplete all as specified andas directed. 85 S&FPVC (SWR) vent cowl of radius of 75 mm dia complete all as specified andas directed. 86 S&F in repair 75 mmPVC (SWR) floor trap, plain with grating including jointing with solvent cementincluding jointing to waste pipe fixed in cement concerete B1 (1:2:4) complete all as specified andas directed. 87 Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to walls or roof for 75 mm bore pipe complete all as specified andas directed. 88 Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to walls or roof for 100mm bore pipe complete all as specified andas directed. 89 S&F 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min wt-210 gms) complete all as specified andas directed. 90 S&F in repair brass CP towel rail 20 mm dia D type 60 cm long between flanges complete all as specified andas directed. 91 S&F in repairMS peg set of six power coated as approved by GE complete all as specified andas directed. 92 S&F in repair 125 mm dia steel grating with or without hole complete all as specified and directed. 93 S&F in repair drapery curtain rod of metalic 20 mm dia covered with PVC coatingincluding MS bracket, end ball, rounded block (coated with brown/cherry/golden colour) of approved pattern and shade fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified andas directed. 94 S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plugs, washers and waste coupling, waste pipe, incl bedding in cement mortar on wall incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm, bowl size 410mm x 330mm x 160 mm complete all as specified andas directed. 95 Demolition of cinder concrete of any description and in any position and removing the rubbish from work sitecomplete all as specified andas directed. 96 Taking down existiing sunken treatment and cleaning sunken surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed.M & L for providing water proofing treatment to sunken floors all as given below :-(a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight.(b) Sealing of joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125.(c) Cleaning the concrete surface by brushing & watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours.(d) Appying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days.(e) Applying 15mm thick plaster in CM 1:4 mixed with CICO super @ 100ml per 50 Kg cement on treated surface. (f) M & L cement concrete type E-2(1:5:10) as in filling of sunken floor. Note : Ponding test should be performed for 48 hours as per direction of engg. in charge. 97 M&L for GI spout 25mm dia light grade ,fixed to walls complete all as specified andas directed. 98 Supply only liquid water proofing compoundcomplete all as specified andas directed. 99 S&F floor door stopper of aluminiumalloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified andas directed. 100 Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,drainsetc, but excluding ashlars facings, dressed stone work and precast concrete articlescomplete all as specified andas directed. 101 M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified andas directed. 102 M&L for brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall in CM 1:4complete all as specified andas directed. 103 M&L cement concrete 1:3:6 type C-2 (40mm graded aggregate) in foundation, filling and mass concretecomplete all as specified andas directed. 104 Excavation in trenches, notexceeding 1.5m wide not exceeding 1.5m in depth: for foundation, etc, or for shafts , wells cesspits, manholes, pier holes, etc not exceding 10 Sqm on plan and n exc 1.5m in depth and getting out, in hard/densesoilcomplete all as specified andas directed. 105 Demoliton/breaking of drain pipes (salt glazed ware,AC or reinforced concrete) set in cement mortar and takingout off trenches and removing the debris from the site all as spd of 150mm/200 mm dia pipe inclding demoilition of cement concrete haunching etccomplete all as specified andas directed. 106 M&L concrete bed to 150 mm bore pipe in D2 1:4:8 (40mm graded aggregate) inclduding haunching against the sides of pipecomplete all as specified andas directed. 107 S & F and laying 150 mm thick reinforced concrete pipes class NP-2 laid and jointed complete with collers as intrenches andcomplete all as specified andas directed. 108 Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cmcomplete all as specified andas directed. 109 Removal of surplus excavated soil to a distance exceding 250 m and not exceeding500m and deposited where directed at a level not exceeding 1.5 m above the starting pointcomplete all as specified andas directed. 110 M&L providing precast cement concrete in cover slab (for manhole) type B1 1:2:4 (20mm graded aggregate) set in CM 1:4complete all as specified andas directed. 111 M&L MS TMTbars 10 mm dia and over cut to length, bend to shape etc complete binding with and including mild steel annealed wire not less than 0.09 mm dia conforming TMT barscomplete all as specified andas directed. 112 Taking out of solid/semi solid sludge from existing main holes of any size and any depth and burying the entire sludge/sludge water in to excavated pit of adequate size including excavation and covering with earth or disposing off into covered vehicles outside the periphery of defence land to a distance exceeding 1 KM including taking off RCC/iron main holes covers and refixing the same after clearing complete all as specified andas directed. 113 M&L for Cement concrete type C-2 1:3:6 ( Using 40 mm graded stone aggregate) as in surface channelscomplete all as specified andas directed. 114 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement complete all as specified andas directed. 115 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided forcomplete all as specified andas directed. 116 Material and labour for Reinforced cement concrete (nominal mix) 1:2:4Type B-1(using 20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified andas directed. 117 Material and labour for Formwork to flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finishedcomplete all as specified andas directed. 118 Material and labour for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exceeding 20cm widecomplete all as specified andas directed. 119 Supply and fixing in repair soap dish steel chromium plated 100 mm size complete all as specified andas directed. 120 S&F in repair plate rack stainless steel of size 600x900 mm fixed with washer and plugscomplete all as specified andas directed. 121 M & L for Complete removal of existing roof treatment or roof tile or plaster and removing from site to a place outside defence land as specified by civil authorities and clean the surface of roof with water and remove dust complete all as specified. M&L for highly elastic, UV-resistant membraneone-component, water-based, liquid, and solvent-free coating for adhesion on various surfaces, including porous and non-porous substrates,with ability to bridge cracks ,cold applied , water-proofing membrane that is highly elastic and UV resistant with 10 years Warranty .ASTM D 6083-97aWaterproofing and heat reflecting system having following key performance properties:1.UV resistant ,prevent yellowing and weathering2.Highly elastic upto 350% and crack bridging3.Excellent adhesion on porous and non-porous substrates4. Tensile Strength >10 N/mm2 with GeoTextile fleece5. Soler Reflective Index (SRI) more then 109-111ASTM E1980-11System: First coat:Providing and applying OEM prescribed compatible primer over the prepared surface for adhesion and bridging cracks.Coverage: 0.2kg/m2(with 50% dilution of waterReinforcement: Geotextile 40 gsmSecond coat: highly elastic, UV-resistant membraneone-component, water-based, liquid, and solvent-free coating for adhesion on various surfaces, including porous and non-porous substrates,with ability to bridge cracks.Consumption: 0.5 kg/m2.Third coat: highly elastic, UV-resistant membraneone-component, water-based, liquid, and solvent-free coating for adhesion on various surfaces, including porous and non-porous substrates,with ability to bridge cracks.Consumption : 0.8 kg/m2.System buildup-1.5kg/sqm with geotextile of 40gsmFor accessible roof, tiles with screed/ adhesive may be fixed thereafter. 122 Material and labour for plastering 10 mm thick in cement mortar (1:3) using 100% coarse sand on roof surface including water proofing compound as per manufacturers instructionscomplete all as specified andas directed. 123 M&L for 25 mm thick PCC 1:2:4 type B 0(12.5mm graded crushed stone aggregate) , floor surfacecomplete all as specified andas directed. 124 M&L for SRI tile 300mm x 300mm x 10 mm thick set, jointed and pointedin roof floor/terraces over and including 15mm thick screed bed in CM 1:4 with chemical based adhesive as per manufacturer instructioncomplete all as specified andas directed. 125 S & F in repair 15mm borefor CP wallmixer for mixing hot or cold water screwed downiron pipescomplete all as specified andas directed. 126 M & L for providing 75 mm thick plain cement concrete 1:4:8 mix, type D-2 (Using 40mm graded stone aggregate) as sub-base floorcomplete all as specified andas directed. 127 M&L for 100mm thick cement concrete 1:2:4 (using 40mm graded stone aggregate) as in pavement /hard standing finishing the surface even and fair complete all as specified andas directed. 128 M&L for PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as incoping, benching on corner of joints , as in roof kerbs rounded or chamfered on edges etccomplete all as specified andas directed. 129 M & L forProviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sandcomplete all as specified andas directed. 130 Taking down old unsv copper/aluminium point wiring concealed / batten (light,fan, socket or power) complete, including fixture and fittings such as switches,sockets, ceiling roses,bell push,bell electric,lamp holder,bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board pvc/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etccomplete all as specified andas directed. 131 Taking down Ceiling fan, sealing cable end, dismantling blades and removing fan and blades to store and Hanging to same location toceiling fan (M.D. supply) and connecting upincluding provision of cable from ceiling rose after completion of point wiringcomplete all as specified andas directed. 132 Taking down Exhaust fan from wall and sealing cable end, keeping it in store and fixing it to same location and connecting upincluding provision of cable from ceiling rose after completion of point wiringcomplete all as specified andas directed. 133 Taking down geyserand keeping it in store safe custody and fixing it to same location and connecting up with cable after completion of point wiringcomplete all as specified andas directed. 134 M&L in replacementfor Sub main wiring with proper colour coding , insulated , unsheathed ,multistranded ,copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 6.0 Sqrmm for earth wire unsheathed , multistranded , copper conductor FRLS, drawn through therigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length incl taking down old wiring complete all as specified andas directed.Note : 1) Wiring shall be done in proper colour coding.2) Rates are inclusive of cutting / chasses withsuitable PCC works and making good to disturbed surfaces. 135 Material and labour for point wiring for one light / fan / call bell point controlled by one 5 Amp switch with 1.5 Sqmm two single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into concealed PVC rigidconduit with modularCI / pressed steel sunken / terminal boxes of required size including Modular cover plate with frame for mounting switches, sockets, fan regulators etccomplete all as specified andas directed.Note :1) Wiring shall be done in proper colour coding.2) Rates are inclusive of cutting / chasses withsuitable PCC works and making good to disturbed surfaces. 136 Material and labour for point wiring for one light point controlled by Two 2 wayswitch with 1.5 Sqmm two single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into concealed PVC rigid conduit and with modular CI / pressed steel sunken terminal boxes of required size for mounting modular cover plate with framefor mounting switches,etccomplete all as specified andas directed.Note :1) Wiring shall be done in proper colour coding.2) Rates are inclusive of cutting / chasses with suitable PCC works and making good to disturbed surfaces. 137 All as per item No136 above but for multi 5 pin 5 amp socket outlet on same board ISI markedcomplete all as specified andas directed. 138 All as per item No 136 above but for multi 5 pin socket outlet 5 amp socketon independent board ISI markedcomplete all as specified andas directed. 139 All as per item No136 above but for One bell point controlled by one push button on the same board with other switches or independent with cable 1.5 Sq. mm sizecomplete all as specified andas directed. 140 All as per item No 136 above but for multi 6 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 sqmm copper conductor multistrand cable pvc insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 25 mm dia and unsheathed copper conductor multistranded cable 2.5 sqmm as earth wire FRLS pvc insulated in green colorcomplete all as specified andas directed. 141 S&Fin Modular Socket, 6A - 5 pin combined 2 module, 240 volts ISI markedcomplete all as specified andas directed. 142 S&Fin Modular switch 1 module 6A,1 module , 240 volts ISI markedcomplete all as specified andas directed. 143 Supply and fixing of Modular Switch 2 way 6A,1 Modulecomplete all as specified andas directed. 144 S&Fin Modular bell push 6A, 1 module , 240 volts ISI markedcomplete all as specified andas directed. 145 S&Fin ceiling rose, 2/3Pin/PVC/polycarbonate isolated body ISI markedcomplete all as specified andas directed. 146 S&Fin Modular switch 1 way 16A, 1 module , 240 volts ISI markedcomplete all as specified andas directed. 147 S&Fin Modular Socket 6A/16A - 6 pin combined 2 module, , 240 volts ISI markedcomplete all as specified andas directed. 148 S&F in Calling bell Ding Dong AC 230 Volts, single pole ISI markedcomplete all as specified andas directed. 149 M& L in for Modular Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittingscomplete all as specified andas directed. 150 M & L in Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500Kcomplete all as specified andas directed. 151 S & F in LED light fitting 10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified andas directed. 152 S&F LED lights fitting 1x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, and power factor >0.9, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified andas directed. 153 S&F in replacement ofDistribution Board TP&N 4 way double door suitable for TPN 4 pole 100 Amp 16 KA four pole as incomer, it should be IP 43 protected with Copper Bus Bars, Neutral Links, Earthing barcomplete all as specified andas directed. 154 M&L for replacement distribution boardsheet steelpowder coatedfor MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double doorcomplete all as specified andas directed.Note:- Distribution board and MCBs should be same make. 155 Supply and fixing in replacement MCB SPN 40 to 63 Amp rating 240V, 10KA B curve type, in the MCB DB complete with connection, testing and commissioningcomplete all as specified andas directed. 156 Supply and fixing in replacement for 240V, 10 KA B curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 Amp, in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed. 157 Supply and fixing in replacement for 240V, 10 KA B curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed. 158 M&L for Earthingcomplete with galvanised mild steel earth plate electrode of size600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron orearth lead wire 4 mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. complete all as specified andas directed. 159 Supply and fixingin replacement 415V 10KA B curve miniature circuit breaker (MCB) TPN 4P, upto 100 Amps of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified andas directed. 160 Supply and fixingin replacement Fan step regulator, 120 W - 2 module 240 volts ISI markedcomplete all as specified andas directed. 161 Supply and fixing in LED Building light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver,& 32 mm dia GI Pipe Medium Grade Bracket, Mounting 02 nos Clamps nut & Bolt/Anchor Boltwith impact and corrosion resistant including thermal management in multiple optics including taking down complete with IP 65/66 protectioncomplete all as specified andas directed. 162 Disconnecting and taking out defective underground cable any size and any type from trenches, roof, pole, pipe, floor, wall etccomplete all as specified andas directed. 163 Supply and laying, connecting and testing XLPE underground cable insulated and overall sheathed with aluminium conductor heavy duty 1100 volts grade 16 Sqmm 4 core laid in trenches / on poles / road crossing or passing through existing / new pipe under road crossing, clamping on wall etccomplete all as specified andas directed.
