Tender For Additional / Alternator To Cookhouse And Allied Works Of Officers Mess At Hq Sac U Under Ge Af Trivandrum; 1 Excavation in trenches n exc 1.5mwide and n exc 1.5m in depth for foundationetc n exc 10 sqm on planand getting out in hard/dense soil, complete all as specified and directed. 2 M&L for returning, filling includingspreading , levellingwatering and well ramming in layersnext 25cm in hard and dense soil, complete all as specified and directed. 3 Removing excavatedmaterial exc 250m andn exc 500m and depositing where directed. 4 M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface 75 mm (Broken stone or boulders), complete all as specified and directed. 5 M&L for PCC (1:4:8 ) Type D2 using 40mmgraded stone aggregate as in sub-base under floor and mass concrete, complete all as specified and directed . 6 S&F mild steel TMT bar 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm including clips complete all as specified and directed. 7 M&L for Mild steel bars TMT Bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. 8 M&L, Formwork to Rough finished surfaces of concrete , sides of concrete foundations, footings,bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams ; and similar work with rough finished flat surfaces of concrete, complete all as specified and directed. 9 M&L, for formwork to Rough finished surfaces of concrete , sides of pillars, posts, struts, piers, columns and stanchions rough finished square, rectangular or polygonal surfaces of concrete, complete all as specified. 10 M&L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bresummers, lintels over 1.5m span etc with rough finished flat surfaces of concrete, complete all as specified and directed 11 M&L for formwork to chullah hoods, chajja, troughs and similar items including edges, with rough finished flat surfaces of concrete etc complete all as specified and directed 12 M&L, for Reinforced cement concrete (design mix) RCC M-30 (using 20 mm graded stone aggregate ) in foundation footing , plinth beams, base of column , under reamed piles and mass concrete, complete all as specified and directed. 13 M&L Reinforced cement concrete (design mix)M-30(using 20 mm graded stone aggregate )Columns, pillars, piers, posts and struts, complete all as specified and directed. 14 M&L for RCC M-30 design mix (20mm graded aggregate) in beams, cantilevers, bresummers, lintels over 1.5m span etc complete all as specified and directed. 15 M&L Reinforced cement concrete (design mix) M-30(using 20 mm graded stone aggregate ) in chajja, complete all as specified and directed. 16 M&L for precast cement concrete 1;3:6 type C1 using 20mm graded stone aggregate solid block masonry exc 10cm in width and setting in cement mortar 1:6 complete 17 M&L for providing precast cement concrete solid building blocks (PCC 1:3:6 Type C-1), or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4, complete all as specified and directed. 18 M&L rendering 15mm thick in cement mortar (1:4) in two layers(Ist layer 10mm thick and 2nd layer 5 m thick including WPC) on fair faces of brick or concrete surfaces finished even and smooth without usingextra cement, complete all as specified and directed. 19 M&L, 75mm thick pcc 1:3:6 type-C-2 in plinth protection 40mm graded aggregate with necessary form work,complete all as specified and directed. 20 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. Note : The tiled floor has to be demolished/ dismantled entirely up to the sub base level/ RCC floor level including backing coat irrespective of number of layers of tiles and taking down wall plaster also including in wall tiles. 21 M&L for Endura tiles/ stone (coloured/ designer) heavy duty of size 400x400mm, 10-12 mm thick, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, complete all as specified and directed. 22 M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. 23 M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. 24 M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 25 M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. 26 M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6, complete all as specified and directed. 27 M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4, complete all as specified and directed. 28 M&L for rendering 10mm thick on fair faces of brick or concrete as in backing coat in CM 1:4 complete all as specified. 29 Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. 30 M&L for Glazed ceramic laterite tile size 300x150x19 mm thick as in wall, set and jointed with adhesive/ chemicaland pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, complete all as specified and directed. Note: Tile shade and design approved by Engr -in-Charge/GE. 31 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. 32 M&L for 25mm thick PCC type B0, 1:2:4, (12.5mm graded aggregate) as sub base for receiving floor tiles, complete all as specified and directed. 33 Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed. 34 M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps,jambs,pillars, window cills, cooking platforms, and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite. 35 Demolition ofcementconcrete in roofs, floors (other than ground floor), beams, staircases, landing and similar suspended work, complete all as specified and as directed. 36 M&L for RCC M-30 design mix (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed. 37 M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick etc for fair finished surfaces, complete all as specified and directed. 38 Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. 39 M&L for Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:6, complete all as specified and directed. 40 M&L rendering 10mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without usingextra cement, complete all as specified and directed. 41 M&L for 15 mm thick rendering in cement mortar 1:4 on fair surfaces of brick masonry or concrete surface, finished the surface even and smooth without using extra cement incl using WPC as per manufacturers instructions, complete all as specified and directed. Note : WPC shall be measured and paid separately. 42 Supply only liquid waterproofing compound (ISI grade only) 43 M&L for preparation of new plastered surface of wall and applying two coats of weather coat paintover a coat of primer complete all as specified and directed. 44 M&Lfor preparation of new treated wall surface and applying two coats of oil emulsion distemper over a coat ofalkali resistant primer complete all as specified and directed. 45 Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similarpattern roof coverings complete all as specified and directed. 46 S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. 47 S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. 48 S&F steel work in tubular trusses & purlinsincluding special shaped washer, gasket plates etc. complete using ERW or induction butt welded tubes conforming to IS. 11611979 grade St.-240 complete all as specified and directed. 49 Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/blankets, any thickness, including any type frame work and cover fillets etc, complete all as specified and directed 50 M&L for false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595x595mm of approved texture, design and patterns, to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams per sqm per including both sides) comprising of main -T runners of size 24 x 38 mm of length 3000mm, cross -T of size 24x32mm length 1200mm and secondary intermediate cross -T of size 24x32mm of length 600mm to form grid moulded of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80grams per sqm) i.e. 12x50mm long dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L-Shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25 mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with galvanised iron perimeter wall angle or size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall S.S screws. With 15mm thick regular/butt edged without perforation plain/designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles confirming to JIS-Z 2801 and ASTM G-21, complete all as specified and directed. 51 M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over GI frame work seamless perimeter 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and including hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3 mm mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and including two coats of OBD over 3mm thick acrylic putty, complete all as specified. Note : Rate inclusive all type of design i.e. offsets and projection. The area measured only length and width of room and building. Design of ceiling approved by Engineer-in-charge /GE. 52 Taking down Chowkhats or frames not exc. 1.5 sq. m each (without taking off shutters from the frames) 53 Taking down Chowkhats or frames exc. 1.5 sq. m and n exc4.0 sqm each (without taking off shutters from the frames) 54 M&L for fixing in repairs 12mm thick Toughened glass for doors, partitions automatic doors & similar work including cutting to shape, drilling holes and including necessary fittings i.e. stainless steel hinges, SS H or S type handles, Pivot, top and bottom patch and patch lock etc, complete all as specified and directed. 55 Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge 56 Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. 57 Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall becceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note:- Rate inclusive of glass pane/PVC Sheet as per direction by Engr-in-Charge. 58 Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wire mesh including quotedrate) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 59 S&F for factory made uPVC Openable window/ ventilator single panel as per following details. A) Outer frame for double leaf shutter. B) openable shutters with suitable hinges for both glazed and gauzed (Wire mesh) shutters. C) Suitable handles and locking system for shutters. D) Aluminium grill to be provided on frame in between glazed and gauzed shutters. Note:-1) Glass panes and wire mesh shall be fixed at factory itself and the quoted rate is deemed to be inclusive of glass panes of 5mm thick and wire mesh. Note:-2) Size of the uPVC sections shall be as per manufactories catalogue of Villa windows series of M/s OKOTECH or equivalent complete all as specified and directed by Engineer-in-Charge. Note:(i) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (ii) Rate inclusive of glass panes / Stainless steel wire mesh pane. (A) Area not exceeding 1.00 sqm each 60 S&F mild steel work as framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 61 M&L preparation of new steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc crome complete all as specified and directed. 62 S& F power coated anodised aluminium frame for doors, windows, ventilators/ partitions with one rebates including joint cleat for fixing etc complete all as specified . 63 S&F 2mm thick fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and directed. 64 S&Frepairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed. 65 Taking down cement plaster including existing roof treatment or fillets on roof surfaces and wall surfaces complete, racking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance exc 250m and not exc 500m, complete all as specified and as directed. 66 Protection Screed - Horizontal: Fixing 3mm diameter, 50mm square weld mesh over the geo textile surface followed by providing and laying screed concrete of M20 grade of average 75mm thickness with a minimum thickness of 50mm at drain points anda slope of 1:150 or required as per the site condition at all levels by admixing necessary admixtures Conplast WL Xtra @ 200ml per bag of cement of Fosroc Chemicals or approved equivalent and mixing Graded fibrillated 100% virgin poly propylene fibres in concrete at the rate of 0.90 kg/cum as per manufacturers specifications. Treatment to continue along the vertical surface for 300mm height in shape of round Chamfering, curing etc. The concrete shall be provided with groove cutting of 6mm x 10mm at every 5m x 5m area, the joints shall be treated with elastomeric sealants Nitoseal PU 50, complete all as specified and directed. 67 Providing and applying 2 coats of Brush bond Roof guard Premium, single component Acrylic based modified Polyurethane elastomeric Solar Reflective cum waterproofing coating at 0.5mm thickness over the primer layer of Nitoproof WB mixed with water in ratio 1:2 and applied at coverage of 8 - 10 sqm / litre (diluted with water) after thorough surface preparation and allowed to dry.The single component coating shall be applied in 2 coats using roller or brush or aqueegee or airless spray at wet film thickness of 0.5mm per coat at coverage of 0.5 litre / sqm over the designated area and over the chajja, wall above chajja for a height of 900 mm and up to 600 mm on either side of chajja.Laying 200gsm non woven geo textile membrane over Brush bond roof guard premium coating with overlap sealed using synthetic rubber adhesive before providing screed concrete Theproduct shall have a solid content of 50%, Tensile strength >2Mpa (ASTM D412), Elongation >250% (ASTM D412), Shore A Hardness : 75 (ASTM D2240), Tear Strength : 13 N/mm (ASTM D624), Adhesion to substrate : 2 Mpa concrete failure (ASTM D4541), Crack bridging : 2mm ( ASTM C 836), UV resistance 1000 hours : Pass ( ASTM D4587) , Service Temperature : -10°C to +60°C ,SRI- 100% .The coating shall be extended to the parapet wall total height as per manufacturers specification. 68 Dismantling water tanks and removing to store exc 250 and not exc 500 Ltr capacity, complete all as specified and directed. 69 S&F 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Partcomplete all as specified and directed. 70 Dismantling water tanks and removing to store exc 500 ltr and not exc 1000 ltr complete all as specified and directed. 71 S&F 1000 ltr Rotational moulded polyethylene triple layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 72 S&F 2000 ltr Rotational moulded polyethylene triple layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 73 Disconnecting existing tanks capacity not exc 250 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt etc from tanks ofand from mouth of circulation pipes etc complete all as specified and directed. 74 Disconnecting existing tanks capacity exc 250 and not exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt etc from tanks ofand from mouth of circulation pipes etc complete all as specified and directed. 75 Disconnecting existing tanks capacity exc 500 and not exc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt etc from tanks ofand from mouth of circulation pipes etc complete all as specified and directed. 76 S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. 77 S&F in repairs gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/UPVC pipe of 32mm dia bore and fixed,complete all as specified and directed. 78 Taking up or down 25/32mm bore steel/upvc pipe and connections, including cleaning for refixing, complete all as specified and directed. 79 S&F 32 mm bore pipe (LEAD FREE), Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed,complete to walls, ceilings or in floors etc,.complete all as specified and directed. 80 Fixing only 32 mm bore pipe (LEAD FREE), Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed,complete to walls, ceilings or in floors etc.,complete all as specified and directed. 81 Taking up or down 20mm bore steel/ upvc/cpvc tubing and connections, including cleaning for refixing, complete all as specified and directed. 82 S&F 20mm bore pipe (LEAD FREE), Unplasticised PVC pipes of pressure rating 10 kgf/cm2, fixed complete to walls, ceilings or in floors etc.,complete all as specified and directed. 83 Fixing only 20 mm bore pipe (LEAD FREE), Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed,complete to walls, ceilings or in floors etc.,complete all as specified and directed. 84 S&F 20mm bore CPVC pipe with SDR 11& plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified and directed. 85 Complete removal of existing treatment on wall, complete all as specified and directed. 86 M&L for applying 3mm wall care putty on wall surfaces, complete all as specified and directed. 87 M&L for preparation new putty wall surfaces and applying two coats of distemper oil emulsion on wall surface over a coat of primer complete all as specified and directed. 88 M&L for preparation of old surface and applying one coat of distemper oil emulsion on wall surface, complete all as specified and directed. 89 M&L for preparing old plastered decorated surface of ceiling and applying one coat of white wash on ceiling all as specified and directed 90 M&L one coat of exterior emulsion weather coat paint over the old wall surface including the preparation of the surfaces complete all as specified and directed. 91 M&L for preparing old plastered decorated surface of ceiling and applying one coat of white wash on ceiling all as specified and directed 92 S&F in repairs sinks made of stainless steel1 mmthickkitchenorlaboratorywith plugs, washers and wastes;including bedding in cementmortar on to dwarf wall orincluding fixing cantilever bracketsand connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. 93 S&F in repairs sink with drainage board made of stainless steel 1 mm thick, kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size of 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. 94 S&F Vitreous china wash down water closet pan (pedestal pattern) including connect to outgoing pipe and flush pipe (excluding fixing bolts, flushing cistern) complete all as specified and directed by Engr-in-Charge. 95 S&F PVC valve less, symphonic action type, flushing cistern of10 ltr capacity, low level, with inlet ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull or lever, if any complete all as specified and directed. 96 S&F Health faucet (ABS Body) premium quality mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Health faucet with 1meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer), complete all as specified anddirected. 97 S&F PVC connections 15mm size with PTMT nuts of length 600mmcomplete all as specified and directed. 98 S&F 15 mm Stop valve/angle valves, cast copper alloy, fancy type chromium plated, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed for 15mm dia pipe complete all as specified and directed. 99 S&F 50mm bore Unplasticised PVC pipes of pressure rating 10 kgf/sqcm in repairs complete all as specified and directed 100 S&F PVC (SWR) pipes 75 mm, single socketed, in any length with rubber ring joints, fixed to walls, ceilings or in floors etc and including necessary scaffolding where is required, complete all as specified and directed. 101 S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floors etc and including necessary scaffolding where is required, complete all as specified. 102 S&F stainless steel soap tray fixed with brass screws complete all as specified and directed. 103 S&F Chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. 104 S&F bathroom cabinet with mirror 250x400 mm size, complete all as specified and directed. Make : Prayag/Cera. 105 S&F plastic water closet seat cover, closed pattern with flat bottom seat cover, mild steel chromium pated or aluminised hinging device and colour as approvedcomplete all as specified and directed. 106 S&F fancy type Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore or for brass ferrule and fixed complete all as specified and directed. 107 S&F15mm Pillar taps, fancy type,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixedto pipe complete all as specified and directed. 108 S&F Vitreous China wash basin, white, flat back, size 550x400excluding taps, waste, chain and plug andporcelainstopper but including brackets complete all as specified and directed. 109 S& F basin/ sink mixer with 450mm braided connection pipecomplete all as specified and directed by Engr-in-Charge.Make :Jaguar/CERA/Prayag or equivalent 110 S&F 32 mm dia waste coupling of PTMT half or full thread suitable for kitchen sink or wash hand basin (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. 111 S&F Grating doom 100 mm dia with waste hole of PTMT (minimum weight 40 grms) complete all as specified and directed. 112 S&F 32 mm dia waste pipe suitable for wash hand basin and sink complete all as specified and directed. 113 S&Fbrass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge. 114 S&F 5mm thick glass mirror with double coat for protection and longevity, grounded edges for safety and silver plating on the back for better reflection of size 700x500mm, complete all as specified and directed. 115 S&F PVC medium grease trap in size 1150 x 939 x 500 RLUGTP0500GB, complete all as specified and directed. 116 S&F 25mm dia stainless steel curtain rod approved pattern / colour / design of including decorative end caps/dome,etc. complete all as specified and directed. 117 S&F in repairs150 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in walls or floors complete all as specified and directed 118 M&L for cement concrete bed to drain pipe 150 mm dia in cement concrete 1:3:6 type C2 including packing under the haunching on sides all as directed and specified 119 M&L of cement concrete type B 1:2:4 20mm graded aggregate as in surface channels, benching inside manholes complete all as specified and directed 120 S&F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement and making good the surfaces all as directed and specified 121 S&F 75 mm PVC (SWR) multi floor trapwith grating including jointing with solventand making good the surfaces all as directed and specified 122 S & F 110 mm borePVC (SWR) vent cowl,complete all as specified. 123 S & F 110 mm bore PVC(SWR) bends of any radius etc, complete all as specified and directed . 124 S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal etc, complete all as specified and directed . 125 S & F75 mm bore PVC(SWR) bends of any radius etc, complete all as specified and directed . 126 S & F 75 mm bore PVC (SWR) junction single,(Single T) equal or unequal etc, complete all as specified and directed . 127 Cutting into existing manholes for removing existing branch drain, making good to walling and rendering, cutting out branch channel, and making good benchings of 150mm bore pipe. 128 Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 typeB-l smooth finished, and reforming benching as required of 150mm bore pipe 129 Supplying and installing framed steel kitchen cabinet carcases of size 560mm depth and 700 mm height using 1.2mm thick galvanized steel folded frames and horizontal stiffeners with zero spangles confirming to ASTM A 653 and body panels with 0.6mm thick galvanized folded sheet with zero spangle confirming to ASTM A653, fixed with Fishers and steel screws. All Inside body parts are withRoyal Ivory colour with necessary slots for fixing shelves at required levels. The carcass to be supported with 100MM adjustable hard PVC legs to line and level and covered with poly vinyl chloride skirting panels of 100MM width in brushed Aluminium finish, clipped with riged PVC clips to the legs. All steel surfaces are finished with epoxy poly ester powder coating with dry film thickness of 40-60 microns of Royal Ivory colour for300MM 130 All as per above but for400MM 131 All as per above but for450 MM 132 All as per above but for600 MM 133 All as per above but for 800 MM 134 All as per above but for 900 MM 135 All as per above but for 1000 MM 136 All as per above but for1000 MM Corner Unit 137 Supplying and installing framed steel kitchen cabinet carcases of size 560mm depth and 2000 mm height using 1.2mm thick galvanized steel folded frames and horizontal stiffeners with zero spangles confirming to ASTM A 653 and body panels with 0.6mm thick galvanized folded sheet with zero spangle confirming to ASTM A653, fixed with Fishers and steel screws. All Inside body parts are withRoyal Ivory colour with necessary slots for fixing shelves at required levels. The carcass to be supported with 100MM adjustable hard PVC legs to line and level and covered with poly vinyl chloride skirting panels of 100MM width in brushed Aluminium finish, clipped with riged PVC clips to the legs. All steel surfaces are finished with epoxy poly ester powder coating with dry film thickness of 40-60 microns of Royal Ivory colour for 450 MM 138 All as per above but for 600 MM 139 Supplying and installing shelves made with 0.6mm thick galvanized steel folded sheet with zero spangle confirming to ASTM A653 supported on four numbers steel shelvessupporter (560 mm Depth) for400 MM 140 All as per above but for 450 MM 141 All as per above but for600 MM 142 All as per above but for800 MM 143 All as per above but for 900 MM 144 All as per above but for 1000 MM 145 Supplying and installing kitchen carcass shutters using 0.6mm thick galvanised steel folded sheet with 700 mm Height and in post form look .All steel surfaces are finished with epoxy poly ester powder coating with dry film thickness of 40-60 microns of approved colours. All shutters are fixed with screw type zinc alloy die caste handles of 128MM pitch with satin finished and screwed with standard full thread steel screws. Shutters are fixed to steel frames using multipurpose high quality steel hinges manufactured by Hettich for 300 MM 146 All as per above but for 400 MM 147 All as per above but for450 MM 148 All as per above but for 500 MM 149 All as per above but for 600 MM 150 Supplying and installing kitchen carcass shutters using 0.6mm thick galvanised steel folded sheet with 600 mm Height and in post form look .All steel surfaces are finished with epoxy poly ester powder coating with dry film thickness of 40-60 microns of approved colours. All shutters are fixed with screw type zinc alloy die caste handles of 128MM pitch with satin finished and screwed with standard full thread steel screws. Shutters are fixed to steel frames using multipurpose high quality steel hinges manufactured by Hettich for 300 MM size 151 All as per item above but400 MM 152 All as per item above but 450 MM 153 Providing and fixing wire basket accessories with stainless steel 304 grade wires coated with nickel chromium plating with 8% nickel plating and high precision Godrej made set of steel ball slides 530MM long full extension fixed with steel screws. Front panels of all wire baskets with steel shutters with screw type zinc alloy die caste handles of 128MM pitch with satin finished and screwed with standard full thread steel screws. In set of three units, top drawer with fiber rack over steel drawer forSET OF 1 - 300 MM 154 All as per above item but forSET OF 2 - 600 MM 155 All as per above item but forSET OF 3 - 600 MM 156 All as per above item but forSET OF 2 - 900 MM 157 Providing and fixing Swivel Pantry with stainless steel 304 grade wires coated with nickel chromium plating with 8% nickel plating. Shutter with screw type zinc alloy die caste handles of 128MM pitch with satin finished and screwed with standard full thread steel screws SET OF 1 - 450 MM Width & 1900 MM Height 158 Dismantling boarding including fittings, if any, any description fixed in any position with nails complete all as specified and directed. 159 M & L 18/19mm thick Marine plywood, prelaminatedon both sides with decorative choice laminations, fixed with screws to timber frame work as incupboards, ward drops, kitchen covered cabinetetc including pvc decorative lipping around the plywood, complete all as specified and directed. 160 M&L for 2nd class hard wood plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 but not exc 25 sqcm complete all as specified and directed. 161 S&F stainless steel auto close hinges suitable for war drops, shutters etc 162 S&F 150mm brass handles for cupboards/ ward drop shutters, complete all as specified and directed. 163 S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. 164 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc all as directed. 165 M&L for point wiring complete with 1.5 Sqmmsingle core FRLSHPVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through and including non metallic rigid PVC conduit and accessoriesconcealed in walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 1.22 mmthick modular metal flush box and suitable modular white cover plate with frame etc and making good the disturbed surface & panting as per existing colour all as specified and directed One light /bell / fan/exhaust fan point controlled by one switch/bell push 166 All as per above but for One switch socket outlet 5 Amps on same board 167 All as per above but for One switch socket outlet 5 Amps on independent board 168 All as per above but with copper conductor cable FRLSH 2.5 sqmm for one 3 pin socket outlet, 16 Amps concealed in wall/ ceiling and including provision of 2.5 sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board 169 M&L for sub main wiringwith 2 Runs 4 Sq mm for phase and neutraland 1 runs of4 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSHgrade copper conductor cable single core multistranded ISI marked drawn through existing surface/PVC Conduct and accessories and concealed in walls / ceilingall as specified and making good the disturbed surface and painting as per existing colour. 170 M&L for sub main wiringwith 2 Runs 6 Sq mm for phase and neutraland 1 runs of6 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSHgrade copper conductor cable single core multistranded ISI marked drawn through existing surface/PVC Conduct and accessories and concealed in walls / ceilingall as specified and and making good the disturbed surface and painting as per existing colour . 171 M&L for sub main wiringwith 2 Runs 10 Sq mm for phase and neutraland 1 runs of10 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSHgrade copper conductor cable single core multistranded ISI marked drawn through existing surface/PVCconduit all as specified and making good the disturbed surface and painting as per existing colour . 172 Supply and fixModular switch 1 way 6A 1 module 173 Supply and fixModular socket 6A2/3 pin combined 2 module 174 Supply and fixModular switch 1way16 A 1 module 175 Supply and fixModular socket 6A /16A2/3 pin combined 3module 176 Supply and fix Modular regulator , 120 w - 2 module 177 S&F in replacement of UNSV tube light fitting of 36/40 W with surface mounting steel LED Batten tube light 20 watt,4 feet long,3000k/6500k,PF greater than 0.9 with lumen efficiency greater than 100 lumen/wattcomplete with accessories internally , pre-wired connecting up with twin core flexible copper conductor cable of suitable size. Make CG/Wipro/Havells 178 S&F in replacement of UNSV tube light fitting of 1 X 11W/2X9 W with surface mountingsteel LED Batten tube light 9/10watt,2 feet long,3000k/6500k,PF greater than 0.9 with lumen efficiency greater than 100 lumen/wattcomplete with accessories internally , pre-wired connecting up with twin core flexible copper conductor cable of suitable size. Make CG/Wipro/Havells. 179 S&F in repair of Ceiling rose, surface bakelite, 65x50mm, two to three terminals AC,230 V complete all as specified and as directed 180 S&F in repair ofMCB Protected socket with sheet steel enclosure with MCB SP of capacity 20 Amp complete all as specified and directed.Make : Havells/Crompton/Wipro 181 Taking down unserviceable MCB distribution board, S & F Vertical TPN 4 way of any size and capacity double door with suitable busbar including space for fixing of MCCB 125 Amp disconnecting from mains and making good the disturbed surfaces all as directed. 182 Taking down unserviceable MCB distribution board, S & F SPN 4 way of any size and capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces all as directed. 183 Taking down unserviceable MCB distribution board, S & F SPN 12 way of any size and capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces all as directed. 184 Taking down unserviceable MCB distribution board, S & F TPN4 way of any size and capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces all as directed. 185 Supply and fix in replacement ofMCB 230V,50Hz, C curve AC with rapturing capacity 10kA of the following capacities all as specified and as directed forSP 5 To 32 Amp 186 All as per above but for RCCB 40 amps sensitivity 100mA 187 All as per above but for SPN 32 AMP 188 Supply and fix in repair of415V 10KA C curve miniature circuit breaker (MCB) TPN 63A and current carrying capacity in the DB complete with connection testing and commissioning 189 Supply and fix in repair of MCCB 4 Pole440 volts AC 50 HZ 125 Amps 25KA, adjustable thermal magnetic release 190 M&L for cutting & removing the burnt winding of ceiling fan of 1200 mm sweep and cleaning the slot, rewinding with super enamelled copper wire of suitable size ,varnishing heating and insulating and painting and reassembling the spares complete all as specified. 191 M&L for cutting & removing the burnt winding of Exhaust fan of 300/450mm sweep and cleaning the slot, rewinding with super enamelled copper wire of suitable size ,varnishing heating and insulating and paintingand reassembling the spares complete all as specified. 192 Earth continuity conductor or main Earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit or pipe or fixed to a poles or any other indicated situation for loop Earthing etc.as required 4 mm dia GI or steel wire complete all as specified and as directed . 193 Disconnecting and taking down the unserviceable Earthing and M & L for Earthing complete with GI earth plate 60x60cm.x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate to a depth not less than 1.5m below ground level, connected to and including GI wire 4mm dia with GI protection pipe 15mm dia light grade connected upto DBs by means of bolts, nuts, check nuts and washers made of copper, galvanizediron pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC 1:2:4 cover slab 50mm thick with re-inforcement of 8 mm TMT bars @ 100mm c/c both directions and PCC chamber with PCC 1:3:6 type C2 including excavation and earth work, disposal of surplus soil to a distance not exceeding 50m, charcoal, lugs, common salt complete all as specified and as shown on plate No.3 of SSR Part-I 194 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) 195 S&F LED 18W square/round type fitting of make :Havells LHEBHEP51W018 orCrompton/Phillips 196 S&F LED 9W square/round type fitting of make :Havells LHEBHEP51Z1W009 or Crompton/Phillips 197 S &F Decorative wall light fixture gold finish with cognac hammered glass diffuser with 12 Wwarm white LED FILAMENT Lamp E27 base all as specified 198 S&F Exhaust fan, steel body AC single phase 230 V of size 300mm sweep with blades and frame and louvers incl cutting suitable size hole as specified and directed. 199 M&L for cutting of hole on existing wall suitable size for fixing 300mm sweep exhaust fan and making good the disturbed surface incl plastering ,painting as per the existing colour all as specified and directed 200 Supply and fixing of round shape 6 watt White/Warm White 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light . Make Gold model Cat No :GL9C0307109 201 Supply and FixWall fan 400 mm sweep 230 volts single phase suitable for wall mounting including fitting accessories all as specified. Make Havells/Bajaj/Crompton 202 Supply and install testing, commissioning of Split AC with inverter type, Variable speed compressor which adjusts power depending on heat load, convertible / adjustable with 4 cooling modes through remote control to operate in different tonnages for different cooling needs, comprising of indoor unit with dust Filter, Anti-bacterial Filter & outdoor unit with Copper Condenser Coil, single phase 230V, 50Hz complete with cordless remote control unit of high EER rated BLDC compressor, including inter connection cable of suitable size, necessary fixing arrangement complete unit shall be placed at suitable position and height inside the room and outdoor unit at suitable place outside the room on plinth height / on wall or roof as suitable and including voltage stabilizer of suitable capacity, metallic bracket with fixing bolts for outdoor unit, insulated copper piping etc., Refrigerant R410-A/R32 of capacity 1.5 TR (copper type) 5 star rated complete all as specified and directed. Note: 1 Year Comprehensive Warranty on the Product and 10 Years on Compressor 203 Supply and install testing, commissioning of water cooler with water purifier ofcapacity 40/80 ltr SS 304 tank, water flow rate 200ltr/hrs, Hot, Cold, Normalwater, heater capacity 1000wattsEnergy efficient (Maximum starrating available in market) single door, 240 volts AC including suitable capacity of voltage stabilizer. Make : Godrej/ Samsung/Water doctor or equivalent 204 S&F Galaktic Smart LED Strip 15W 3m with LED Driver.MakeHavells LHEHCNP1ND1W015 or equivalent in Crompton/Phillips/Luker/Bajaj/Wipro/Shakti. 205 Supply and fix of 18W Fuoco Magnetic Lens Type track light. Make Luker LMTLN18 or Equivalent in Surya/Havells/Wipro 206 Supply and fix of Magnetic concealed track channel(Black).Make Luker LMTCHRC1MBK or Equivalent in Surya/Havells/Wipro
