Tender For Day To Day Maintenance Works In Md/Otm Accommodation In Zone F And G Area Under Age B/R (N) No Ii Of Ge (N) Secunderabad.; 1 Supply and fixing in repair PVC lid for poly water storage tanks of capacity 500/1000 litres including PVC hinges and PVC locking both complete all as specified. 2 Cleaning and removing all scale and dirt, etc., from tanks and mouth of circulating pipe etc. includingrefixing in position after cleaning exc. 500 & n. exc. 100 litres capacity of tank complete all as specified. 3 Supply and fixing in repairs 20 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified . (Minimum weight 210gms) 4 Supply and fixing in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified . (Minimum weight 142gms) 5 Labour only for opening of air locks in toilets /baths and kitchen water pipe line but excluding fittings complete all as specified. 6 Supply and fixing in repairs brass spindel of 15mm size/ type andin any position complete all as specified. 7 Supply & Fix rotational moulded polyethylenewater storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm diaball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore brass stop cock, high pressure with crutch or butterfly handle etc complete including dismantling existing water tank all as specified and directed. 8 Supply & Fix rotational moulded polyethylenewater storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm diaball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore brass stop cock, high pressure with crutch or butterfly handle etc complete including dismantling existing water tank all as specified and directed. 9 S & F 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying infloors complete all as specified and directed 10 S & F 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying infloors complete all as specified and directed 11 Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixingcomplete all as specified and directed 12 Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixingcomplete all as specified and directed 13 M&L cutting chases pinning in brick work for concealed water tubing etc. and making good to facings where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified. 14 S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including P-trap (PVC) 100 mm dia., connection to flushing pipe, anti-syphonage pipe complete including making good to floor all as specified.Cera/Prayag/Johnson Pedder. 15 S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) white including trap, connection to drain (outgoing pipe) and to flushing pipe, anti-syphonage pipe, including PVC jet for Pedestal pattern pan including 450/600mm long PVC connection including PTMTnuts and plastic water closet seat of white in colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified.Cera/Prayag/Johnson Pedder. 16 Supply and fix in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia complete all as specified and as directed by Engineer-in-Charge.Make: Cat Part No: Co466(SP) model Aquarius of Parryware or equivalent model in CERA/ HINDWARE as approved by GE. 17 S&F in repair vitreous china wash hand basin white of bowl size 550mm x 440mm including waste coupling and PVC waste pipe 32mm dia,pillar tap cast copper alloy with capstan heads chromium plated fancy type for 15 mm bore pipe, including M S brackets complete all as specified. Cera/Prayag/Johnson Pedder. 18 S&F in repair Vitreous china Urinal, Half stall type, white withwaste pipe and CP brass spreader complete including providing andfixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement;flush pipe, grating and union for discharge pipe including Cp Urinal spreader for fixing with 15 mm dia pipe complete all as specified. Cera/Prayag/Johnson Pedder. 19 M&L in repair600X450 mm bevelled edge mirror of selected quality glass , mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers . 20 S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified.Cera/Prayag/Johnson Pedder. 21 S&F PVC connection 15mm bore size with two nuts and washers of PTMT, of length 450mm all as specified. 22 S&F PVC connection 15mm bore size with two nuts and washers of PTMT of length 600mm all as specified. 23 S&F in reapir Cabinet mirror plastic bodyfor toilet of size 400x500mm with 4mm thick looking mirror complete all as specified.equivalent of make as per Appx A as approved by GE. 24 S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm x 203 mm, bowl size 405mm x 354mm x 203mm all as specified 25 S&F in repair Sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes cappling, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size405mm x 460mmx 203mm, bowl size 405mm x 354mm x 203mm all as specified 26 S&F in replacement stainless steel plate rack of size 609mm X 762 X 254 mm all as specified 27 Supply and fix in repair for glass shelf 450mm X 150mm X 8 mm thick with chromium plated railing fixed with and including chromium plated brackets complete all as specified and as directed. 28 Supply and fix in repair for corner glass shelf of size 200mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed. 29 Supply and fix in repairs vitreous china wash down rimless wall hung WC inbuilt jet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 355X555X370mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. FLS-WHT-5953JPPSM or of equivalent make as per Appx A as approved by GE 30 S&F in repairs stainless steel peg set of five pegs, fixed/welded/soldered on stainless steel base plate of size 300mmx30mmx2.5 mm and fixed with stainless steel screws, rowel plugs as per the sample approved by the Engineer-in-charge complete all as specified and directed. 31 Supply and fix in repairs for hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. 1 metre long flexible tube & wall hook, Cat No. ALD-CHR-593Nof make Jaquar or of equivalent make as per Appx A as approved by GE complete all as specified and as directed. 32 S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx A as approved by GE 33 S & F in repair Brass Chromium plated towel rail all as specified and directed. Make: Johnson Delta series Cat part No: T1350Cor of equivalent make as per Appx A as approved by GE 34 S&F in repair Brass Chromium plated towel ring all as specified and directed. Make:Johnson Delta series Cat part No: T1351Cor of equivalent make as per Appx A as approved by GE 35 S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrulecomplete all as specified. Make: JohnsonVIVA series Cat part No: T4806 or of equivalent make as per Appx A as approved by GE 36 S&F in repairs Pillartaps Swan Neck quarter turn suitable for 15mm bore pipe fancy type brass CP screwed for iron pipe or brass ferrulecomplete all as specified. Make: JohnsonMagna series Cat part No: T2804C or of equivalent make as per Appx A as approved by GE. 37 S&F in repairs Pillartap quarter turn suitable for 15mm bore pipe fancy type brass CP screwed for iron pipe or brass ferrulecomplete all as specified. Make: JohnsonVIVA series Cat part No: T4801C or of equivalent make as per Appx A as approved by GE. 38 S&F in repirs wall mixer brass chromium plated quarter turn 2 in 1 with bend pipe with provision for over head shower withbend pipe on upper side connecting legs and wall Flangessuitable for fixing with GI pipes 15mm dia complete all as specified and as directed.Make: JohnsonVIVA series Cat part No: T4821C or of equivalent make as per Appx A as approved by GE. 39 S&F in repirs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flangessuitable for fixing with GI pipes 15mm dia complete all as specified and as directed.Make: Jaquar Cat Part No FUS- 29273UPR FUSION SERIES or of equivalent make as per Appx A as approved by GE. 40 S&F in repairs cast copper alloy chromium plated fancy type central hole basin mixer with popup waste system with 450 mm long braided hoses capstan head for high pressure suitable for 15mm bore pipe complete and all as specified. Cat Part NoQQT-7169B of Jaquar 41 S&F in repairs angle cock with flange chromium plated cast copper alloy screwed down complete all as specified. Make: Johnson Eco Cat part No: T3910C or of equivalent make as per Appx A as approved by GE. 42 S&F in repairs Two Way (2 in 1) bib taps with wall flange quarter turn suitable for 15mm bore pipe fancy type brass CP, screwed for iron pipe or brass ferrule complete all as specified. Make: JohnsonVIVA series Cat part No: T4808C or of equivalent make as per Appx A as approved by GE. 43 S&F in repair cast copper alloy CPshower armsquare 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Make : JohnsonCat part No: S0001C1 or of equivalent make as per Appx A as approved by GE. 44 S&F in repair brass chromium plated shower rose 115mm sizesquare (without arm) with swivel joints including fixing with arm/ pipe all as specified. Make: JohnsonCat part No: S0006C or of equivalent make as per Appx A as approved by GE. 45 S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent as approved by the GE. 46 Supply and fixing in repairs bib tap standard of PTMT any colour 15 mm bore minimum weight 90 gram ISI Marked. 47 Supply and fixing in repairs stopcock standard of PTMT any colour 15 mm bore minimum weight 90 gram ISI Marked. 48 S&F in repair15 mm bore Stop valves/gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed all as specified . 49 S&F in repair20 mm bore Stop valve/ gate valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed all as specified . 50 Supply and fixing in repairs 32 mm bore PVC flexible pipe for wash hand basin complete all as specified . 51 Supply and fixing in repairs 40 mm bore PVC flexible pipe for sink complete all as specified . 52 S&F in repairs waste fittings, brass,chromium plated for glazed ware sink/basin etc, size 32mm with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 53 S&F in repairs waste fittings, brass,chromium plated for glazed ware sink/basin etc, size 40mm with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 54 S&F in replacement 100mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4, all as specified. 55 S&F in replacement 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4, all as specified. 56 S&F in repair grating round 75 mmsize of CP with/without hole all as specified. 57 S&F in repair grating round 100mm size of CP with/without hole all as specified. 58 Taking down shutters of any description area exc1 Sqm but not exc 2 Sqm and refixing in same opening including easying adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc.complete all as specified. (Renewal of builders hardwareif specially ordered shall be measured and paid for separately) 59 Taking down shutters of any description area exc1.5 Sqm but not exc 4 Sqm and refixing in same opening including easying adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc.complete all as specified. (Renewal of builders hardwareif specially ordered shall be measured and paid for separately) 60 M&L fo repair of Steel gate of any size , any shape and any position. Taking down steel gate and repair holdfast, uplifting of steel gate, welding to required member, repair/greasing to roller,repair and repositioning ofBase Rail ,make in true position to revolve, including one coat of synthetic enamal paint complete all as specified and directed by Engr- in - Charge. 61 Supply and fixing 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass from wooden/steel frames complete all as specified. 62 All as per item No 62 above but figured glass complete all as specified. 63 Removing existingglass from window panes in which oil putty and MS pins are damaged and making goodby providing oil putty and MS Pins including cleaning the glass panes andfixing backin position Completeall as specified . 64 Supply and fixing aluminium door seal up to 1200mm length best quality 65 Supply and fixing in repairs 150mm size mild steel, ordinary rat tail rod pattern spring (helical door spring) with roller and roller plates including welding to angle iron plate or chokhats as required and as specified. 66 Supply and fixing in repair 0.56mm thick plain aluminium sheeting to doors, straight flashings with aluminium screws complete all as specified. 67 S &F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.4mm & fixed with alluminium wire staples all as specified & directed. 68 S&F in repair Stainless steel butt hinges 100mm complete all as specified and directed.NOTE :- All screws shall be self tapping chrome plated and length ofscrew not less 38 mmcomplete all as directed and specified. 69 S&F in repair Stainless steel sliding door bolts, plate type,bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long( selected quality as approved ) complete all as directed and specified. 70 S&F in repair Stainless steel Tower Bolt of 200 mm long ( selected quality as approved )fixed with Self Tapping screws complete all as directed and specified. 71 S&F in repair Stainless steel Handle of 150 mm long ( selected quality as approved ) fixed with Self Tapping screws complete all as directed and specified. 72 S&F in repair brass Handle cost type polished of 150 mm long ( selected quality as approved ) fixed with Self Tapping screws complete all as directed and specified. 73 S&F in repair floor door stopper of brass type polishedand tongue 135 mm anodised with hard drawn steel spring fixed in floorcomplete all as directed and specified. 74 S&F in repair floor door stopper of Stainless steel body and tongue 135 mm anodised with hard drawn steel spring fixed in floorcomplete all as directed and specified. 75 S&F in repair Drapery curtain rod of stainless steel 25mm dia complete with stainless steel brackets and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified. 76 M&L for repair to Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminiumsnap beading ,re-setting floor/hydraulic spring etc all as specified . 77 S&F in repairs, double action floor spring hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified complete including taking down aluminium door shutter and refixing 78 S&F in repair Dead lock, vertical type 4 lever size 65 mmmild steel body with duplicate keys including key hole with fixing bracket complete. 79 S&F in repair mild steel body lock, vertical type, for cup board 65mm size Grade-I, 4 levers with duplicate keys including key hole with fixing bracket complete 80 S&F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kgISI Marked complete. 81 S&F 5.00mm thick glass fixed with rubber packing aluminiumsnap beading and metal pins in skelton shutters of doors and windows including solar control film 25 micron reflective type stick to glass panes as per manufactures instructions including hacking out old broken glass from frames complete all as specified. 82 Demolition of Brickwork or stone/ boulder masonry, built incement mortar includingall quoins, arches, pillars,etc,complete all as specified. 83 Material and labour for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)complete all as specified and as directed. 84 All as above item No 82 here in But except bricks. 85 M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cementwith two coats of exterior emulsion weather proof paint over a coat of primer on new surface all as specified. 86 M&L for 15mm thick cement plaster in CM 1:6 on bricks or concrete surfaces finishing the surfaces even and fair and provision of sagol finish with two coats of oil bound distemper of any tint over a coat of alkali resistant primer all as specified. 87 Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair and provision of sagol finish including taking down existing plaster with two coats of oil bound distemper of any tint over a coat of alkali resistant primer all as specified and directed. 88 M&L for 15mm thick cement plaster in CM 1:4 on bricks work or concrete surfaces finishing the surfaces even and smooth without using extra cementwith two coats of exterior emulsionweather proof paint paint over a coat of primer including taking down existing plaster all as specified. 89 M&L for dubbing out average 10mm thick on irregular face of wallscement plaster 1:6 complete all as directed by Engr in Charge 90 M& L for demolition of Concrete in ground floors and pavings n exc 15 cm thicknesscomplete all as directed by Engr in Charge 91 M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, 75mm thick and finished even and smooth without using extra cement, complete all as specified. 92 M&L for 40mm thick Cement concrete 1:2:4 type B-2 (using 20mm graded stone aggregate) as in Floor,finished even and smooth without using extra cement complete all as specified.. 93 Supply only glass dividing strips 3mm thick, 38mm wide and inserted in position to conform to design complete all as specified & directed. 94 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises 95 M&Lnon-skid coloured ceramictiles7 to 8mm thick (square/rectangular) area of each tile exceeding exc. 0.06 sqm but not exc. 0.11 sqm as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4complete all as specified. 96 M&L colouredVitrified Double Charged tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36sqm as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4complete all as specified. 97 M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete all as specified. 98 M & L for Dismantling of Stone slabs and tiles of any description or thickness infloors, aprons etccomplete all as specified and as directed 99 Material and labour for 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite including demolition of existing stone of any description complete all as specified and as directed. 100 Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed. 101 Material and labour for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturers instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by usingconstruction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and repairing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturers instructions and as directed by Engr-in-Charge. Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved. 102 Material and labour for cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and as directed. Make: STP, Asian paint, Berger paint, Pidilite, Fosrock 103 S&F in repair Stainless steel Hasp and staple, safety type of 100 mm long including bolt to hinge plate and fixed with Self Tapping screws all as specifed 104 S&F in repair, 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished 105 S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including dismantling board complete all as specified and directed. Make: Action tesa, Century, Kitply 106 S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixedas approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply 107 S & F Continuous (piano) hinges, stainless steel,Width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed. 108 S&F Stainless steel Handle of 75 mm size (modular selected quality of design as approved) fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge 109 Removing of vegetation / plantation on the wall/ roof/any position, of up to double storey building including necessary scaffolding upto 15m height and roots, girth n.exc 10cm each and making good of surface byapplying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete.(Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately) 110 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.complete all as spd 111 S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors. 112 S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors. 113 S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls. 114 S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls. 115 S&F in repairs 50mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls. 116 Supply and fix in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed. 117 Supply and fix in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed. 118 Supply and fix in repair for PVC (SWR) bends any radius of 50mm bore complete all as specified and as directed. 119 Supply and fix in repair for PVC (SWR) branch piece, single Y, equal or unequal for 110mm bore pipe complete all as specified and as directed. 120 Supply and fix in repair for PVC (SWR) branch piece, single Y, equal or unequal for 75mm bore pipe complete all as specified and as directed. 121 S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified.. 122 S&F in repairfor PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified.. 123 M & L 20mm thick kota stone topping with 4 to 7 mm size marble aggregate including grinding and polishing in floors for treating the surface with beeswax polish 124 Supply and fix in repairsplastic water closet seat white closed pattern with flat bottom and coverand mild steel chromium plated hinging device for pedestalpattern WC/ semi pedestal and pattern WC (anglo India type) complete all as specified and as directed. 125 M&Lmm thickPCC (1:4:8) type D2 using 40mm graded aggregatein sub base including dismantling of existing floor 126 M & L second class plain fillets square rectangular or trangular exc 3 & n exc6 sqcmin section clean swan secured with nail 127 Running weldings in repairs thickness of metal n exc 6 mm 128 Ditto but thickness o metal exc 6 but n exc 9 mm 129 Welding in repairs n. exc 2.5cm in length thickness of metal n exc 6 mm 130 Welding in repairs n. exc 2.5cm in length thickness of metalexc 6 mm but n exc 9 mm 131 Ditto, exc 2.5cm but n exc 5 cm in length thickness of metal n exc 6 mm 132 M/L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work 133 Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as directed. 134 M & L for providing & fixing false ceilingwith fully perforated 12mm thick micro tegular edged or 10mm thick square edged false ceiling at all heights with GRG (Glass Fibre reinforced gypsum) false ceiling tiles of size 595 x595 mm approved texture design and patterns having moisture content less than 2% , humidity resistance of 99% , NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (Part 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T Runners of size 14x32mm of length 3000mmcross T of size 15x32 mm of length 1200mm and secondary intermediate cross T of size 12 x32 mm of length 600mm to form grid module of size 600 x600mm ,suspended frm ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm)i.e. 50mm long , 8mm outer diameter M-6 dash fasteners , 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partitionwith the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications including dismantling all as specified and directed by Engineer in charge 135 Supply and fix in repair for fibre glass reinforced translucent plain sheeting 2.00 mm thick fixed with coach screw and washer in gate, wall etc. complete all as specified and as directed. 136 S & F in repairs Magneticand connected plate to shutters and frame complete all as specified and directed.
