Tender For Construction Of 2 Acrs (18X16) Including Toilet Facility At Middle School Dupathyar.; 1 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: all kinds of soils 2 Providing & Laying of stone soling (dully hand packed) including watering dressing and ramming with all carriages loading un-loading and stacking etc complete 3 Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level (1:4:8 coarse sand 40mm nominal size crushed stone agg.) Ind. Carriage 4 P/L in position specified grade of reinforced cement concrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stone agg. 20mm nominal size. Incl carriage 5 Reinforced cement conc. Work in beams, suspended floors roofs having slope upto 15 deg. Landing balconies, shelves, lintels upto floor 5 level excld. Centring, shuttering in 1:1.5:3 20mm stone agg. Nominal size. Carriage 6 Cast in situ Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:nominal size) 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm 7 Centring and shuttering including strutting, propping etc and removal of form workFoundations, footings, bases of columns etc. for mass 8 Walls any thickness including attached buttresses, plinth and string courses etc. 9 Suspended floors, roofs, landings, balconies and access platforms 10 Edges of slabs and breaks in floors and walls 11 P/L and placing high strength doformed steel including cost of binding wire Thermo-Mechanically Treated bars of grade Fe-500D 12 Supplying and filling in plinth with Boulders/GSB under floors including, watering, ramming, consolidating and dressing 13 Brick Work with FPS bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement: 6 coarse sand) 14 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and Death hold fast lugs or with dash fasteners shall be paid for separately) imported wood 15 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately).35mm thick imported wood. 16 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including fixing of 4mm thick float glass panes complete and excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately).35mm thick imported wood. 17 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer in-charge: imported wood 30mm.) 18 15mm cement plaster on rough side of single or half brick wall in1:6(1 cement: 6 fine sand mortar) 19 6 mm cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand)e 20 Providing and applying white cement based wall putty of avg.2mm of approved brand and manifuture 21 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer 22 Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 23 Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized 24 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on wood / steel works. 25 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement:4 coarse sand) including grout Size 500x500 26 providing and laying Polished Granite stone flooring in required sign and patterns, in linear as well as curvilinear portions of the ilding all complete as per the architectural drawings with 18mm drick stone slab over 20 mm (average) thick base of cement mortar (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with whiteeement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge, Polished Granite stone slab jet Black, Cherry Red, EliteBrown, Cat Eye or equivalent. 27 Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer in-Charge. Granite Work 28 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying priming coat of approved steel primer all complete. Including Imm thick MS Sheets for sofits and eves boarding. 29 Providing colour coated High Rib roofing including vertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (0.50mm thick) 30 Providing ridges or hips of width 60cm overall width colour coated steel. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.2.4.2 0.50 mm thick with zinc coating not less than 275 gram/m2 31 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1) cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size). 32 Providing and fixing of 50 mm dia stainless steel railing of 304 grade of hallow tube 1.6mm thich jindal/salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape buffing etc.complete and fixing Istainless steel balusters upto 900 mm height newel post 1050 not less than 1050 mm ss tubes 3 in one installed horizontally includind cuting welding grinding to required shape and size by required steel dash fasterners nuts bolts screws etc.. 33 Providing and fixing of bright finished brass hardware fittings 34 125 mm Handle 35 200 mm Handle 36 100x10mm Tower bolt 37 250x10mm Tower bolts 38 Stay hooks 39 L-Dop 18 with inbuilt Locking system 40 Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:9.103.2 Twin rubber stopper 41 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. 42 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (Table top) 43 Providing and fixing P.V.C. waste pipe for sink or wash basin 44 Providing & fixing Stainless Steel Jali (Grating) with or without hole for waste pipe for N. Trap. Weight not less than 70 gms. 45 Providing and fixing toilet paper holder C.P. brass 46 Providing and fixing PTMT towel ring trapezoidal shape 215 mm 47 Providing and fixing uplasticized PVC connection pipe with brass unions 30 cm length 15 mm N/B 48 Providing and fixing Health Faucet of approved make 49 Providing and fixing Angle Valve of approved make 50 Providing and fixing CP waste (Coupling) of approved make 51 Providing and fixing Wall mixer of approved make 52 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-inchares Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc 53 PN-16 pipe , 20 mm Od (SDR-7.4) 54 External work including trenching , refilling etc 55 PN-16 pipe , 25 mm Od (SDR-7.4) 56 PN-16 pipe , 32 mm Od (SDR-7.4) 57 Providing and fixing ball valve (PPR- 25 mm N/B) 58 Providing and fixing ball valve (PPR- 32 mm N/B) 59 Providing and placing on terrece (at all floor level ) Polyethylene water storage tank Isi :12701 marked with cover and locking system and making necessery holes for inlet outlet and overflow pipes but without fittings and the base support for the tank 60 Providing laying and fixing PVC pipes fitting-s in trenches in required gradient, including cost of all fixing accessories, trenching etc complete job as directed by Eic 61 75 mm Dia 62 100 mm Dia 63 150 mm Dia 64 Supply and fixing 150x100 size square mouth S.W. Gully Trap P type with C>I Grating , brick masonary /concrete chamber and water tight PVC cover frame 300x300 mm size inside 65 Dry rubble massonary with hard stone in foundation and plinth using quarry stone with bond stones includng all carriages 66 Electric part 67 Wiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC Insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch, modular plate and earthing the point with 1.5 sq. mm FRLS PVC Insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/Anchor/ Finolex/KEI/RR or equivalent make) Incl. cost of condult. 68 Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC Insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on one circuit). (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent) Incl. cost of condult 69 Supplying and fixing of suitable size Gl box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 6 pln 16/20/25 A modular socket outlet and 16/20/25A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schnelder or equivalent) 70 Supplying and fixing of sultable size Gl box with modular plate and modular cover in front on surface or in recess, Including providing and fixing of 2 no. 3 pin 5/6 A modular socket outlet and 2 no. 5/6A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or eq.) 71 Supplying and fixing of modular sockets/indicators/switches on existing modular plate and switch box, incl. connections, etc. as required. (Havells/SSK/Anchor/ABB/Schneider or eq.) 1.3 pin 5A-10A socket. 72 ii, indicator. 73 Point wiring for SA-10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS PVC insulated 660/1100volt grade flexible stranded. copper conductor wires in recessed or surface conduiting system and earthing the point with 1 x 2.5 sq. mm single core copper wire (loop earthing), (Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent) Incl. cost of conduit 74 Supply, installation, testing and commissioning of 10 Watt LED recessed/ 20 no. mounted (round or square) Down lighters having aluminum body, minimum 80lm/w, average life 50000 hours, LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India, Operating temperature -10°C to +45°C. The Job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a perlod of two years reckoned from the date of successful commissioning/ handing over of site to the Intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro). Commercial serles. 75 Supply, installation, testing and commissioning of 1 star 1200 mm sweep 04 no. celling fans of Havells / Crompton Greaves/BajaJ/ Usha (Sample to be got approved), Incl. cost of extension of Gl rod (If required) and making of necessary connections. 76 Supply and fixing of two module stepped electronic fan regulator on the existing modular plate switch box, Incl. connections but excluding modular plate etc. as reqd. 77 Supply, Installation, testing and commissioning of 200-250 mm sweep 01 no. shutter type exhaust fans, incl. cost of celling rose and making of space in walls/ windows as per site and necessary connections. (Havells/ Philips/ Crompton). 78 Supplying and fixing of modular blanking plates on existing modular plate and switch box, excluding modular plate as required. 79 Wiring for sub mains along with earth wire In FRLS PVC Insulated 660/1100 volt grade flexible stranded copper conductor wires In recessed or surface conduiting system, Incl. cost of condults(Havells/ Polycab/ Finolex/Anchor/KEI/RR or equivalent 80 2 x 2.5 sq.mm + 1x 2.5 sq. mm earth wire 81 Supply and fixing of 16 way Double door surface/ recess mounting, Horizontal type, 240 V, SPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer 82 Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 ΚA C curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. 83 Supply, installation, testing and commissioning of 32/40 A DP rating 240V, 10 KA C curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. 84 Supply, installation, testing and commissioning of 63 A DP rating 240V, 10 KA C curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. 85 Providing of chemical earthing as per IS standards by way of digging 8 feet 01 pit then embedding 2.5 mtr. Long Gl earthing electrode, 60 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2 dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound. 86 Supply, laying, connecting and commissioning of 25 sq. mm 2 core PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable, incl. cost of required al. thimbles duly crimped. 87 Supply, installation, testing and commissioning of 850 VA Power Inverter (Pure Sine Wave type) having generator compatible & provided and fitted with 1 no. 12V, 150 Ah, tall tubular batteries of Exide make and PVC trolley for resting/ housing of batteries. The job also includes terminal connections of batteries, input/output leads of required size and length, carriage and applicable taxes. Please Enable Macros to View BoQ information
