Tender For Road Safety Work For The Year 2024-25 Widening And Strengthening Work Of Mau Kather To Chandausi Via Fattehpur Samsoi Road (Odr) - Providing and laying of Hot applied thermoplastic compound 2.5mm thick including reflectrorising glass beeds @ 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beeds as per IRC 35 the finished surface to be hard uniform and free from streaks and heats (Ch No 27) andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. 2 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 2012 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment concete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The retro reflective sheting shall be tested for 3 year outdoor weathering test in Indian Conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender but excluding GST. (Size 60cm X 45 cm Rectangular with Diffinitation Palte) andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. 3 Road DelinatorProviding and fixing of standard as per IRC 79-2019 consisting ofminimum retro reflective unit exposed area of 330 square cm in white color, full cube corner micro prismatic non- metalic retro-reflective sheeting on each side conferming with IRC 67-2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 type IV table specification. The The Delenator shall be painted with powder coat of minimum 40 microns thickness on topof which retro reflective sheeting shall be pasted on both sides. The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground width not less than 100 mm and shall extend not more than 300 mm below the ground white being installed. The front and back facse of the delenator shaould be curved with a radius of not more than 200 mm and with dellaangle (or central angle of curve) layingn between 20 degree and 30degree, to increase the visivilty of the delenator for vehchicles moving in continous curve the delenator shall have grooves across the length to make the reflective sheets vandal-proof. Theretro reflective sheeting shall be tested for 3 yearoutdor wethering test in indian conditions as per IRC 67:2012 & proof of the same in form of goverment report shall be uploaded which quoting tender. if samehow tender pre qualification condition do not ask for goverment report then the report shall be submitted of engineer-in-charge before finalization of bill. The delenator is meant for application on gaps in median, trafic islands, dangerous bends, roundabouts, narrow bridges etc. or as per desired by site engineer. MoRTH -805(8.15) andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. 4 Providing and fixing of traffic sings - CHEVRON signs at curves retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T., transportation,installation and incidentals all complete as per direction of the Engineer-in-Charge. 5 For Hazard markerboard Retro-reflactrorised Traffic sign as per IRC67-2012Providing and fixing of retro reflectroised cautaionary mandatory and informatory sign as per IRC 67-2012 made of High intensity grade sheeting vide clouse 801.3 friced over aluminium sheeting type IV 1.5 mm thick supported on miled steel angle irone post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-150 grade cemnent concreat 45cmx45cmx60cm below ground level as per approved drowing. the retro reflective sheeting tested for 3 yearsoutdor wethering test in indian conditions as per IRC 67:2012 & proof of the same in form of goverment report shall be uploaded while quoting tender.Morth 801 (8.4)xi) 45x90 cm two way Object Hazard verical post andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T., transportation,installation and incidentals all complete as per direction of the Engineer-in-Charge. 6 Reflective Raised Pavement Markers (road Studs/Cat Eye)Supply and fixing of reflective raised pavment marker with its body durface made of tough ASA (Acylic styrene Acrylonitrite) or HIPS (Hi- impect Polystyrene) or acrylonitrile butadies styrenc (ABS) The marker shall supported a lod of 13335 kg tested in accordance with ASTMD 4280 and its reflective panels shall consist of numbers of lenses containing single or dual prismatic cubes of providing total internal reflection of the lights entring the lens face. retro refletive surface shall perferably be 35t 5 degree to base and area of each retor reflecting surface shall not be less than 13.0 sqcm road studs shall be legibly marker with name trade mark or other means of identification of the manufacturer. mimensions of road studs should not be less than 100 mm x 100 mm x10mm. RPM (With shank)as per ASTM andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. 7 Providing and erecting a W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. 8 Tree PlateS/F reflective tree plate having size 15x15 cm consisting type 11 sheeting over 1.5 m thick aluminium sheet including labour, material, T&P etc fort proper completion of the work SI No 20 IRC 67-2012 andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. 9 Supply, fixing & eraction of built up Cantilever Structure 6 m span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shail comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 0.90x0.90x1 50 m of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:3:6 cement coarse sand and 40 mm gauge stone ballast and RCC-M25 grade concrete including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2012 complete in all respect The Rates shall include cost of design fabrication, supply, transportation Local shifting Erection of Signage structure using crane, inclusive of all taxes etc. all T&P machine. material and labour required for proper completion of work as per direction of Engineer-in-charge SI No 4 , 802 andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. 10 Retro-ReflectiveSheeting type-XI with 4 mm thick ACM Single SideProviding & fixing of reflective signs with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC-67:2012 retro reflective sheeting with back frame MS angle of 35x35x5 mm. Legends, letters, numerals and borders etc should be as per MoRTH specification No-801 3.7 The sheeting shall have a pressure sensitive adhesive of the aggressive lack type requiring no heat solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting. Micro prismatic type IV Retro reflective sheeting confirming to ASTM D4956-09 shall be Pressure fixed. The Retro reflective sheeting shall be tested for a certificate of having the sheeting lested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Govemment Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge SI No 12, 801 andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T.
