Tender For Road Safety Work For The Year 2024-25 Widening And Strengthening Work Of Miithanpur Sakra Ghat Road. - Providing and laying of Hot applied thermoplastic compound 2.5mm thick including reflectrorising glass beeds @ 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beeds as per IRC 35 the finished surface to be hard uniform and free from streaks and heats (Ch No 27) andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. 2 Retro-reflactrorised Traffic sign as per IRC67-2012 Providing and fixing of retro reflectroised cautaionary mandatory and informatory sign as per IRC 67-2012 made of High intensity grade sheeting vide clouse 801.3 friced over aluminium sheeting type IV 1.5 mm thick supported on miled steel angle irone post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-150 grade cemnent concreat 45cmx45cmx60cm below ground level as per approved drowing. the retro reflective sheeting tested for 3 yearsoutdor wethering test in indian conditions as per IRC 67:2012 & proof of the same in form of goverment report shall be uploaded while quoting tender.Morth 801 (8.4) iv) 80mmx60mm rectangular with deffinatitation plate(20cmx60cm) Sign Board andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. 3 ii) 60 cm equilateral tringle with diffinitation plate (20cm X 60cm) andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. 4 iii) 60 cm Circular with diffinitation plate (20cm x 60cm).andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. 5 iv) 80 mm x 60 mm rectangularwith diffinitation plate (20cm x 60cm) andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. 6 Road DelinatorProviding and fixing of standard as per IRC 79-2019 consisting ofminimum retro reflective unit exposed area of 330 square cm in white color, full cube corner micro prismatic non- metalic retro-reflective sheeting on each side conferming with IRC 67-2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 type IV table specification. The The Delenator shall be painted with powder coat of minimum 40 microns thickness on topof which retro reflective sheeting shall be pasted on both sides. The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground width not less than 100 mm and shall extend not more than 300 mm below the ground white being installed. The front and back facse of the delenator shaould be curved with a radius of not more than 200 mm and with dellaangle (or central angle of curve) layingn between 20 degree and 30degree, to increase the visivilty of the delenator for vehchicles moving in continous curve the delenator shall have grooves across the length to make the reflective sheets vandal-proof. Theretro reflective sheeting shall be tested for 3 yearoutdor wethering test in indian conditions as per IRC 67:2012 & proof of the same in form of goverment report shall be uploaded which quoting tender. if samehow tender pre qualification condition do not ask for goverment report then the report shall be submitted of engineer-in-charge before finalization of bill. The delenator is meant for application on gaps in median, trafic islands, dangerous bends, roundabouts, narrow bridges etc. or as per desired by site engineer. MoRTH -805(8.15) andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. 7 For Hazard markerboard Retro-reflactrorised Traffic sign as per IRC67-2012Providing and fixing of retro reflectroised cautaionary mandatory and informatory sign as per IRC 67-2012 made of High intensity grade sheeting vide clouse 801.3 friced over aluminium sheeting type IV 1.5 mm thick supported on miled steel angle irone post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-150 grade cemnent concreat 45cmx45cmx60cm below ground level as per approved drowing. the retro reflective sheeting tested for 3 yearsoutdor wethering test in indian conditions as per IRC 67:2012 & proof of the same in form of goverment report shall be uploaded while quoting tender.Morth 801 (8.4)xi) 45x90 cm two way Object Hazard verical postandincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. transportation,installation and incidentals all complete as per direction of the Engineer-in-Charge. 8 Reflective Raised Pavement Markers (Cat Eye/ Road Stud)Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitnte) or HIPS (High-Imoact Polystyrene) or Acrylonitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280. The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be mouled of methyl methacrylate conforming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro-reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submil a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer In addition a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers in case the markers are displaced, damaged get worn out or lose their reflectivity compared to stipulated standards the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. .LKO SOR Ch-26 item no.-5 andincluding all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T.
