Tender For Providing Led Street Light In Various Villages, (Balance Work), Greater Noida. - Supply And Fixing Of Led Street Light Fitting Having Die Cast Aluminium Body And Diffuser With Driver Set Suitable For 30Watt. To 40 Watt. Confirming To Ip 66 Prot, noida-Uttar Pradesh

Tender For Providing Led Street Light In Various Villages, (Balance Work), Greater Noida. - Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 30Watt. to 40 Watt. Confirming to IP 66 protection complete in all respect. (UPPWD-2018-1420) (Cat-AA) 4 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in air the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (UPPWD-2018-(501-507)) 5 16 sq. mm 4 core 6 S/F of 70x90mm Shackle insulator/100mmx 65mm pin insulator including G.I. Bolt/ spindle nuts etc. complete in all respects (UPPWD-2018-620) 7 Supply and fixing of 40 mm dia 1.5 m long G.I. Pipe B Class bracket with two numbers DClamp 50x6. flat iron on steel tubular pole/PCC Pole with bolts, Nuts etc. Complete in all respects as per direction of E-I/C. (GNIDA Rate approved-2024-38) 8 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc as required. (UPPWD-2018-716) 9 Supply & laying of Aluminium conductor XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks onsides and on top. On surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/l, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (UPPWD-2018-501-507) 10 3 1/2 X25 Sqmm 11 S/F of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the Engineer-in-charge. (UPPWD-2018-504) 12 16 Sqmm. 13 25 Sqmm. 14 Supply & erection of stay set at least 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 cm x 6.3 mm anchor plate, thimble stay clamps stay insulator, 19 mm x 600 double screw tightener, 7/4.00 mm G.I stay wire etc. in 1:3:6 cement concrete complete in all respect. As per (UPPWD-2018 63) 15 Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. As per (UPPWD-2018-634) 16 Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect. (G.I. wire should use as a support to bind overhead line with it at interval of 5 mtr.) As per (UPPWD-2018-628) 17 Supply & erection of steel tubular pole with 1/6 over all length of pole grouted with cement in 1:3:6 (1 cement: 3 course sand: 6 stone ballast) including plinth of 30 cm above the ground level plastering of plinth including excavation back filling etc. the rates includes all materials labour and T&P etc.complete in all respect as per direction of E-I/c (GNIDA approved rates-2024-27) 18 410 SP-17, 8.5 mtr. (Approx. wt 92 kg) 19 Supply and fixing of XLPE insulated copper un-armoured control cable 1100 V grade etc. complete in all respect as per direction of the Engineer in charge (GNIDA approved rates-2024-1) 20 3Cx2.5 Sqmm 21 Supply and burying of 40mm dia x 4.5 metres long G.I Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No 6 to 8SWG Gl wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top. alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. As per (UPPWD-2018-701) 22 HDPE Pipe 90 mm Dia (DSR-2018/2892) 23 Supply and fixing of heavy duty cadmium plated copper connector with end plate complete in all respect. As per (UPPWD-2018-1128) 24 Two way connector HKM 100 25 Four way connector HKM 100 26 Supply and fixing of M.S. box of size 480mm x 480mm x 200mm deep in sunk for housing BDB/TPN fabricated from 16 gauge M.S. Sheet and 13mm x 2.5mm flat iron etc. painted outside with red oxide primer and inside with synthetic enamel paint complete in all respect. As per (UPPWD-2018-1114A) 27 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. (UPPWD-2018-807 (f-ii)) 28 40 A ΤΡΝ 29 Labour Cess and GST will be paid extra as per govt. orders

INR 3970 /-

INR 2.19 Crore /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB