Construction Of Processing Unit Shed 1169 Sq.M-2 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 3 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means 4 Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means 5 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cmthick including hand packing and compacting etc. complete. 6 Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per One Square Metre of surface area covering ten yearsguarantee on bond paper. 7 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 8 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 9 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 10 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 11 Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 12 Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. 13 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 14 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. 15 Filling in plinth and floors with approved excavated material in 15cm. to 20cm.Layers including watering and compacting etc. complete. 16 Providing and constructing masonry in Autoclaved Areaclaved ( Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size ( 625x240x225)mm in extra fine jointing mortar of fixoblock of in superstucture including,striking joints,racking out joints watering and scaffolding etc.complete 17 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffoldingand curing etc. complete. 18 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. 19 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc.complete. 20 Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. 21 Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat,scaffolding if necessary , and watering the surface for two days etc complete. 22 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. 23 Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) 24 Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm atweight1.070 Kilogram/One Running Metre.. Top and side track section 92 x31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre.Asperdetaileddrawingsandasdirectedby Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing innylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box 25 Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. 26 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) 27 Providing and fixing false ceiling of plain asbestos cement sheets 4 mm thick with teak wood beadings 45 x 12 mm with frame work of teak wood battens of size 70 x 60 mm at1.00 M center to center including scaffolding, if necessary, all iron work and painting (visible surfaces) to A.C. sheet and beading in two coats etc. complete. (excluding T.W. runner to be paid separately). 28 Providing & Fixing in position, Partition made from 12mm thick Gypsum from both sides on 50 x 50 mm Sal-wood frame of 600 x 600 c to c, having of 800 gsm synthetic wool 50 mm thick in between, including cost of required Cut-Outs & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete 29 PEB WORK 30 Providing and fabricating structural steelwork in rolled sections like joists,channels, angles, tees etc. as per detaileddesign and drawings or as directedincluding cutting, fabricating, hoisting,erecting, fixing in position makingriveted / bolted /welded connectionswithout connecting plates, braces etc.and including one coat of anticorrosivepaint and over it two coats of oilpainting of approved quality and shadeetc. complete. 31 Providing and fixing colour coatedZincalume ( R ) AZ150 ( min 150gms/sq.mt. total on each side ) profiledsheets for roofing. The feed material ismanufactured out of nominal 0.45 mmBase Metal Thickness ( BMT ) (0.5 mmTCT ), Hi-strength steel with min.550MPa yield strength, metallic hot dipcoated with Aluminium-Zinc alloy (55%aluminium 43.4% zinc 1.6% silicon)with COLORBOND ( R ) steel qualitysuper durable polyester paint coat ( withinorganic pigment). The paint shall havea total coating thickness of nominal 35um, comprising of nominal 25 umexterior coat on top surface and nominal10 um reverse coat on back surface.Profile sheet shall have nom. 950- 1050mm effective cover width and nominal25-30 mm deep ribs with subtle squarefluting in the five pan at nominal 180-250 mm center- to-center. The end ribshall be designed for anti-capillarygroove. and return leg. The feed materialshould have coil manufacturers productdetails marked a regular interval.Including fasteners with min. fastenedwith min25 um Zinc Tin alloy coted Hex Head, self -drilling screw etc. 32 ELECTRIC WORK 33 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 34 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 35 Making trench of suitable width anddepth in soft soil for laying provided LTcable up to and including 3.5 corecopper armoured 120 sq.mm completeas per specification no. CW-EXN-CTR 36 Supplying & erecting mains PVC unarmoured cable 1100Volt gradeISImark3core/2.5sqmmstranded/solidcopper completeerectedonwallwithdulypaintedG.I.Saddle@0.25m C/C and rigidly grouted in the wall with the help of plate screw 37 Supplying & erecting weatherproofpowder coated distribution board 4 waywith 2 x 6/10 Amp S. P. M. C. B. withindustrial two pin plug socket 10 A and3 pin plug top 10 A with top covernecessary connection etc complete withapproved make 38 Point wiring for light/bell/exhaust fan inPVC trunking (casingcapping) with 1.5sq.mm (2+1E) FRLSH grade copperwire, modular type switch, earthing andrequired accessories as per 39 Providing point wiring for street lightwith PVC unarmoured cable 1100Voltgrade ISI mark 3 core 1.5 sqmmstranded / solid copper erected on wallwith G. I. Saddle duly painted @ 0,25 mC/C rigidly grouted in the wall with thehelp of plated screw including 4” x 4”M. S. box 2 way with epoxy painting &inside 10 amp Nylon connector strip forstreet light connection and flexible cableof 2 mtrs. for street light. 40 Supply & erecting 10-12W,230V integral type LED Lamp suteble for B-22/E-27 base. 41 Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. 42 Supplying and erecting street light Wall bracket made from 40 mm. dia ‘ B CLASS G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB 43 Providing pipetype earthninh with 40mm dia. G.I pipe or 20 mm dia . G.I. rod complete with all materials as per specification no. EA-EP 44 Supplying, erecting & marking DPMCB6A to 32A, B- series (for lighting) inprovided distribution board as perspecification no. SW-SWR/MCB 45 Supply and errecting GI Sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending , drilling welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paints 46 Supplying and erecting triple pole andneutral distribution board (TPNDB)surface/ flush mounted suitable forSPMCB of 12 ways on iron / GI frame(horizontal busbar type) as perspecification no. SW-SWR/MCBDB 47 Supplying & erecting G.I. pipe ‘A’ class 75 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE 48 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 49 Supplying & erecting Siemens typebrass cable glands for 3 to 4 core 6 sq.mm. /2 to 4 core 10 sq. mm. for XLPEarmoured cable as per specification No.CB-GL 50 Supplying shokproof type hand lamp with lamp holder, bulb/ lamp 100 w guarded glass and 30 mtr .3 core PVC flexible cord with hand shield type3 pin 6 AMP.Plug top 51 ROYALTY 52 Sand 53 Other Minral 54 LAB TEST 55 Sand- Fineness Modulus,silt and clay content 56 Aggregate/Crush material a) Carrying out water absorption b)specific gravity c) Impact Valued) Crushing Value 57 Cement- Cement- Standerd Consistency,fineness, , Setting Time (Initial And Final), compressive strenght, soundness 58 Concrete M10 Grade- Concrete cube Compressive Strength (set of 3 cubes) 59 Concrete M20 Grade- Mix design M20 with all tests on besic materials 60 Concrete M20 Grade- Concrete cube Compressive Strength (set of 3 cubes) 61 TMT steel bars- Steel - Tensile strength,Yield stress, ultimate tensile stress,%elongation, weight per running meter,Bend/Rebendtest.(Set of 3 Bars) upto 16 mm (set of 3 bar) 62 Murum plasticity Index, fild density of copacted layer, proctor test 63 Bricks: Crushing Value, Absorption Value, Specific gravity 64 ESHS 65 ESHS Plan
