Tender For Repair/ Maintenance Of Drain Fencing Footpath And Bdy Wall In Zone D Area Of Age B/R-Ii Under Ge (West) Lucknow; 1 M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc including demolition of Cement concrete (unreinforced) in ground floor and paving n exc 15cm thicknes below or above ground level complete all as specified and directed 2 M & L for60 mm coloured machine pressed rubber moulded precast concrete interlockingpaver block (ISI Mark)inclany shape and size having double glossy finishtop layer with in colour (Red/yellow) M-35 Grade grey cement and pigment including demolition of existing paver blocks complete all as specified and directed. 3 Labour only for coloured machine pressed rubber moulded precast concrete interlocking (red/yellow) paver block any shape and size including dismantling of tiles laid dry or laid dry and pointed complete all as specified and directed. 4 M & L Chequered cement concrete tiles coloured PU mould 30cmx30cmx20mm thick, jointed and pointed in neat cement slurry with grey cement and no pigment set on 15mm thick cement screed (1:6) slurry and pointed incl white or colour cement to match complete including demolition of existing tiles including bedding etc complete all as specified and directed 5 M & L for Sand filling under paver blocks/floors or in foundations including watering and consolidation complete all as specified and directed. 6 M & L for PCC 1:2:4, type B1 using 20 mm graded stone aggregate in coping/ bed of drains including demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thicknes below or above ground level complete all as specified and directed. 7 Dismantling of existing RCC/ Steel /Wooden posts or struts (wood, steel or R.C.C.) any section,concrete ,brick work ,masonry etc including taking out embedded portion and making good disturbed ground complete all speciified and directed 8 Dismantling wrought iron or mild steel work of any description complete all as specified and directed 9 Excavation in post holes not exceeding 0.50cum getting out in Hard/dense soil, returning,filling in layers not exceeding 25cm and making good surfaces complete all as specified and directed 10 M & Lfor PCC1 : 3 : 6 type C2 using 40 mm graded stone aggregate as in foundation filling for securing posts complete all as specified and directed 11 S & F, angle iron (Fe-310) as in posts, struts in fencing including cutting top to shape required, drilling holes, notching for wire etc complete all speciified and directed 12 Supply only galvanised chain link fencing, any size or type complete all as specified and directed 13 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire including dismantling complete all speciified and directed 14 Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 12cm long and dia complete all speciified and directed 15 S & F in repair, galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire complete all speciified and directed 16 Supply and fixing framed work such as grills, gratings etc for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete including dismantling of mild steel work of any description complete all as specified and directed 17 M&L for preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 18 M&L preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed 19 M&L for brick work with fly ashbricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 including demolition of old brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles complete all as specified and directed. 20 M&L for rendering/plaster by using readymix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar complete all as specified and directed 21 Repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and including taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish complete all as specified and directed 22 M & L for preparation of new surfaces of wall applying two coat of cement base paint complete all speciified and directed 23 M&L for applying one coats of cement based paint incl cleaning the old surface and removing the dust from the wall complete all as specified and directed 24 M&L for applying two coats of cement based paint incl cleaning the old surface and removing the dust from the wall complete all as specified and directed 25 S & F in repair 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed 26 M&L for providing precast RCC 1:2:4 type C-1 using 20mm graded mechanically crushed stone agg as in cover slab for man holes, drains, soak well etc and similar articles etc, set in CM 1:6 with plain faces including chamfered weathering throating etc incl necessary form work and including demolition of old reinforced concrete of any description in any postion not otherwise specifically provided far complete all as specified and directed. 27 Supply and fix mild steel deformed bars or TMT bars 10mm dia and overcut and over to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. 28 M & L for Plain Cement concrete Type C1 1:3:6 (20 mm graded stone aggregate) asin surface channels and drains including demolition of Cement concrete (unreinforced) in ground floor and paving n exc 15cm thicknesand below or above ground level complete all as specified and directed 29 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed
