Proposed repairs of Dr. APJ Abdul Kalam Manoranjan maidan Hariom Nagar, Damoji Patil Wadi, Mulund T ward-Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer -in charge Removing any type of flooring i.e.mosaic, cement marble, granites non-slippery, tandur, kotah, shahabad stone or Indian Pattern stone etc Demolishing stone rubble masonry manually/ by mechanical. meansincluding stacking of serviceable material and disposal of unserviceable material Dismantling steel work in built up sectiors in angles, tees, flats andchannels of rolling shutters, grills, gates, fencing, hoardings, including all gusset plates, bolts, nuts, cutting rivels, welding etc. including dismembering and starking within 50 metres lead Removing the paver blocks of any thickness, size & colour from carriage way or footpath & transporting the same to ward depot or any where in BMC limit. The paver blocks shall be stacked neatly at specified locations etc complete as specified and as directed by the Engineer Cutting down or removing stone or brick masonry work in lime mortar or in cement mortar including removal of debris. Excavation for foundations, substructures, basements, tanks, sumps,........complete sity conforming to relevant IS, stacking the selected material in measurable heaps fo the excavated quantity shall be worked out with the base rate (here Rs. 220 per Cu.M.) plus the rate of respective slab of the lift. For more details refer General Notes. Filling embankment and / or low lying ground with contractors murum in layers not exceeding 200mm including breaking of clods and dressing to the required lines, curves and section, watering, consolidating each layer in filled up area by rolling and compacting with vibro roller not less than 10 MT & using other compacting equipment as required to achieve Field C.B.R. not less than 4 in soaked condition etc. complete as directed by Engineer In charge. The rate includes necessary soil testing charges at laboratory & field as per relevant 1.5. codes, royalty, octroi and other taxes if any. (Note: 1) Borrow areas selected by CONTRACTOR shall be got approved from Engineer In Charge, before executing the work 2) The rate includes the royalty and other taxes if any.) SUPPLY AND STACKING OF RED HILL EARTH Levelling, watering and rolling to 95% Standard Proctor Density with a power roller weighing not less than 10 tonnes and preparing the ground to the required grade and camber as specified and as directed by the Engineer Providing & Laying dry stone Rubble Soling with average 230 mm size hard stone set in regular lines, handpacked and interstices thoroughly filled with small chips including filling in with good quality murum brought from outside, compacting with iron rammers, watering, sand spreading 12mm thk. layer of grit on top etc complete as directed by Engineer In Charge. Note: The rate includes the royalty and other taxes if anvi Providing & Laying 150 mm thick dry stone Rubble Soling with average 150 mm size hard stone set in regular lines, handpacked and interstices thoroughly filled with small chips including filling in...... etc complete as directed by Engineer In Charge. (Note: The rate includes the royalty and other taxes if any) Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design mix from Engineer-in-charge and fly ash conforming to grade 1 of 15 3812 (Part-1) only be used as part replacement of OPC as per IS 456 and uniform blending with cement is to be ensured in accordance with clauses 5.2 and 5.2.1 of 15: 456-2000 in the items of ready mixed concrete and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, including the cost of centering, shuttering and finishing, Including cost of curing, admixtures in recommended proportions as per 15 9103 to accelerate/ retard setting of concrete, improve workability without Impairing strength and durability as per direction of the Engineer in charge. All works upto plinth level M-20 grade plain cement Providing and laying in position ready muren plain cement concrete, using fly ash anc cement content as per approved design mix from Engineer-in-charge and fly ash conforming to grade 1 of 15 3812 (Part-1) only be used as part replacement of OPC as per 15 456 and uniform blending with cement is to be ensured in accordance with clauses 5.2 and 5.2.1 of 15: 456- 2000 in the items of ready mered concrete and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for piain censent concrete work, including Dumping of R.M.C. from transit mixer to site of laying and curing, including the cost of centering, shuttering and finishing, including cost of curing-All works upto plinth-M-15 grade plain cement concrete (cement Providing and laying 40 mm thick Indian Patented Stone flooring in cement mortar including providing joints and pronves as directed in patches or in Harger areas with proper curing.etr complete. Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design mix from Engineer-in-charge and fly ash conforming to grade 1 of IS 3812 (Part-1) only be used as part replacement of OPC as per I5 456 and uniform blending with cement is to be ensured in accordance with clauses 5.2 and 5.2.1 of 15: 456-2000 in the items of ready mixed concrete and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit miser to site of laying and curing, including the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per 15: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Providing and fixing of the precast TREE GUARD KERB of M-20 C.C. of height 230mm., width 100mm, Length 400mm., finished neatly, compacting, curing, formwork etc. including bedding of M-10 C.C.procured from M.C.G.M.approved R.M.C. plant, 10cm thick, filling of Jointing in C.M. 1:2 and panting the exposed surface with 3 coats of road marking paint, Grade I of approved colours and quality including single coat of approved brand primer including excavation in C.C. asphalt etc. as specified and as directed. Random rubbie masonry with hard stone in superstructure above plinth. level, including leveling up with cement concrete 1:6:12 (1 cement: 6 coarse sand 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement: 6 coarse sand Raking out joints in lime or cement mortar and preparing the surface forre-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead Providing raised and cut pointing to any kind of stone masonry work at all heights and locations in cement mertar 1:2, including raking of joints upto the depth of 20mm, finishing, curing, cleaning the surface etc. complete as directed by Engineer In Charge. Providing and applying first singie cont of approved primer and two coats Synthetic enamal paint Providing and applying first single coat of approved primer and two coats of waterproof cement paint of an approved make and colour as per manufacturers specifications to any surface, upto 10m height from ground level and at all locations as directed including preparing surfaces for painting by any approved means, scaffolding, cleaning Providing, fabricating and fixing M.S. grill work as per approved design and as per weight specified below to fencing/compound mades out of square / round bars, M.S. flats, angles, with necessary holdfast including painting with one coat of red oxide zinc chromate primer and two coats of approved synthetic enamel paint etc. complete as directed by Engineer In Charge Mild steel grill of weight 20 to 25 Kg/sq. m. Providing & Fixing 0.45m X 0.45m clear internal size of M.S. Galvanised hinged type grating and frame (weighing minimum 53 kg) with minimum 75 microns zinc coating by hot dipped galvanising the MS grating and frame as per 15 2629. (The contractor shall furnish the certificate of galvanising from the Galvaniser.) incuding testing inspection of material sample and finished product in presence of M.C.G.M. Engineers (3 nos.) at Manufacturers works, as per Standard Specification no SP-SWD-2 and as per drawing (Dwg No. MCGM/SWD/2013-08), etc complete as specified & as directed by Charpe Providing and Placing Brick bats in layers with staggered joints for required depth etc. complete in all respectand as directed by the engineer Providing, detailing, composite fabricating members like Trusses, Ngirder girders,bracings, supports, purlins, runners, and similar structural steel members fabricated using M.S. hollow tubular steel sections (circular A rectangular pipes), of TATA Structura Make or equivalent conforming to 1239 part 1 and 2 and of grade Fe 250 as per specifications and approves fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), Including transportion of the same to site, erection of structural steel members for all heights & at all levels, provisi of necessary erection boits, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations Ike preheating as per specifications, straightening, bending, cutting, driling, grinding, machinin If specified, welding, grinding, removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy redoxide zinc phosphate primer of 30 micron seach and two coats Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication Including touching up with spray painting after erection etc complete as Supplying, fabricating, transportation to site and Fixing Galvanized Chain Link Fencing of 10 gauge G.1. Mesh, sizes 50 x 50 mm diamond pattern, fixed 75 mm below inished ground level/coping, including providing and erecting ISA 50x50x6 angle posts 2.5m C/C with cross support at every 8th pole & at corners and 2 nos 6mm dia MS bars at top and bottom with necessary U hooks, nuts and bolts, washers, total height of fencing 2.0m above ground including embedding the angle post in concrete block of 0.45m x 0.45m x 0.6m of cement concrete M15 grade including necessary excavation, and cleaning, preparing the surface, applying one coat of red oxide zinc chromate primer and two coats of Synthetic Enamel paint of approved manufacture, brand, colour, shace etc. complete as directed by Engineer In Charge. (first coat of synthetic enamel paint after fabrication and second coat after Artificial Football field: Infill turf- Tencate-50mm: Providing and applying Artificial Football field: Infill turf- Tencate 50mm on the concrete/metal coba/IPS/asphalt surface including following specifications 1. Pile height :50 mm :150 2. Stitch rate 11000 3. DTEX 9450 4. Density 3 layered (PP, Fleece and net) 5. Backing 6. Coating Latex The item includes cost of material, cleaning the IPS/PCC surface before installation and installation with proper slopes. Preparation of IPS/PCC wi Designing, supply and installation PVC coated Fabric Ferrari 902 S for Tensioned Membrane Roofing on existing M. S. Structural Steel elements/new erection of the M. S. Structural Steel elements like pillars, trusses etc complete (payment for new structural elements and concrete will be paid مههعraممسنا مهم عد استم hu moninaer in chaconn Achitect Brick work with common burnt clay F.P.S. (non modular) bricks of class. designation 3.5 and above in superstructure above plinth level upto floor five level in all shapes and sizes in -Cement mortar 1:3 (1 cement: 3 coarse sand Providing and laying polished natural stone as specified below (Machine cut) of an approved quality and size for paving /flooring in plain and/or diamond /approved pattern including cement mortar bedding of 25 mm thick in 1:4 proportion, cement float, machine cutting, dressing, leveling, jointing, filling the joints with neat cement slurry or with required pigment, machines polishing at site, curing, finishing, etc complete as drected by Engineer In Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for dado including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar. in porportion 1:3, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the Joints with neat cement or pigment mixed with cement, polishing. finishing, curing etc complete as directed by Engineer In Charge. 18mm Providing and applying 15 mm pplying 15 mm thick external sand faced cement plaster upto 10m from ground level and at all locations in cement mortar 1:4 in two coats for masonry (except stone masonry) and concrete surfaces Including, racking out joints, hacking of concrete surface, providing bands, drip moulds, grooves etc. finishing, curing, scaffolding etc complete as Providing & fixing in the foothpath Interlocking concrete paver block 60mm thick Beganit ingrey/Black colour with Stonetexture on top surface of approved pattern/ shape and colourhaving average crushing strength not less than 40 N/mm² as per technical specification and IS CODE 15658:2006; manufactured in double layer Interlocking concrete paver blocks Beganit 12 to 15 mm thick and consist cubical shape Quartz stone. aggregate 8 mm sieve 100% passing and retain on 4.75 mm size sieve, silica sand The bottom layer should be 45 to 48 mm thick in grey cement having 12 mm sieve 100% passing aggregate as per technical specification, rested on average compacted thickness 25 mm well graded. sand cushioning uniformly compacted with proper capacity mechanical compactor with required level, grade and camber etc. complete as
