Tender For Additional / Alternator To Bldg No 1/3 Ncc Officers Mess Of Hq Ncc Dte (Tnp And An) Under Ge Chennai; 1 Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. 2 M&L for flyash brick work with old size bricks straight or curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and directed. 3 M & L for Brickwork with fly ash bricks ,straight or curved in any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and directed. 4 Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed. 5 M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. 6 M & L for Preparation of new plastered surfaces of wall and applying plaster of paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification complete all as specified and directed. 7 M & L for 15 mm thick renderingon fair faces of brick work or concrete surfaces of wallsetc 10 mm thick im CM 1:6 and 5 mm thick inCM 1:4mixed with water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. note : WPC WILL BE MEASURED AND PAID SEPERATELY 8 Supply only Liquid water proofing compoud 9 Dubbing out average 15mm thick on irregular face of walls in patches in CM (1:4) complete all as specified and directed. 10 M&L for rendering 5 mm thick using CM (1:3) on ceiling surfaces in patchesfinished the surfaces even and smooth without using extra cement complete all as specified and as directed. 11 M & L for preparation of old decorated plastered surfaces of ceilingand applying two coats of white wash all as specified and as directed. 12 M&L for preparation of newly plasteredsurfaces on ceiling and applying threecoat of white wash all as specified and directed. 13 M&L forPreparing the newsurfacethoroughly by cleaning,of roof slabtill the mother slab is exposed and washing down with clean water to remove all dirt etc. The slab should be recoated with slurry of Dr. Fixit Pidicrete URP or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STPand cement in 1:1 proportion. After drying,Dilute 2 parts of Dr. Fixit Primeseal or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP with 1 one part of water. This dilution shall cover 7 to 8 sq.mt. Allow it to dry for6 to 8 hrs.Apply the first coat of Dr. Fixit Newcoat or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP without any dilution at the rate of 2 sq mt per litre and allow it to dry before taking up the second and third coats, the rate of application being the same. and open woven glass fibre mesh of 2.5 mm x 2.5 mm must be sandwiched between the first and second coat. While the 1st coat is still wet, place the fibre mesh on it. After the coat dries, start applying the 2nd coat of Dr. Fixit Newcoat or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP . 14 M & L for Complete removal of existing treatment & applying twoor more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of new plastered surfaces of walls complete all as specified and as directed.Make: APEX ofAsian or equivalent of Shalimar / Nerolac/ Berger. 15 Material and labour for applying twoor more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of new plastered surfaces of walls complete all as specified and as directed.Make: APEX ofAsian or equivalent of Shalimar / Nerolac/ Berger. 16 M & L for complete removal of existing treatment on wall surfaces and washing, rubbing down and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1 to 1.5 mm thick plaster of paris on old surfaces of wallcomplete all as specified and as directed. 17 M & L for applying two coat of synthetic enamel paint over a coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 Cm girth or widthcomplete all as specified and as directed. 18 M & L for applying one coat of synthetic enamelled paintincluding preparation of old treated wood surfaces of any description not otherwise described over 10 Cm girth or width all as specified and as directed. 19 M & L for Applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surfacebased materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and directed. 20 Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. 21 S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 22 S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding towel, fixed with self tapping screws complete all as specified and directed. 23 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 24 M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming toFe 410 - W (Grade E-250 Quality -B ) complete all as specified and directed. 25 Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge. 26 Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each all as specified and as directed by the Engineer-in-Charge. 27 Taking down shutters of any description exc. 1 sqm but not exc. 2 sqm each including builders hardwarecomplete all as specified and as directed. 28 Taking down door shutters of any description exc 1 Sqm and n.exc 2 Sqm and refixing in the same opening after laying floor tiles and making necessary alterations to the size of shutters to suit with the door opening to the required height all as specified and as directed. 29 M&L for Second class Hard wood, plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted complete all as specified and as directed. 30 Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, includingcover fillets complete all as specified and directed. 31 M & L for galvanised powder coated snap grid framework of size 605 x 605mm for false ceiling all as specified including vinyl laminated MPL gypsum panels ( GYPTECH) 9mm thick of size 60 x 60 cm fixing withstaples on snap grid by means of GI wires not less than 4mmdia hooks and raw plug etc centre of make. GYPTECH /ARMSTRONG or equivalent complete all as specified and directed. 32 S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. 33 S&F figured glass 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane (any thickness, size, quality or description ) to wooden/aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadsall as specified 34 S&F Sheet glass 5.5mm thick, plain ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane fixing to aluminium frame work (any thickness, size, quality or description ) from Aluminium section fixed with beads/glazing clipscomplete all as specified and directed. 35 S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metredcut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification complete all as specified and directed. 36 S&F Factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing and all as directed. 37 S&F 2nd class hard wood panelled shutters 35mm thick, plain framed (any no of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS :1003(Part-I), kiln seasoned and chemically treated and fitted to chowkats complete all as specified and as directed. 38 M&L for35mm thick 2nd class hard wood Glazed and skeleton door/window shutters open rebated and prepared to receive glass, gauze, etc. withsash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed. 39 S&F5mm thickPVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. 40 S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel framesfixed in repairs, complete all as specified and as directed. 41 M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintle hinges; largehasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps,plate washers & similar small articles conforming to Fe290-0 Gde E-165 complete all as specified and as directed. 42 M&L for preparing surfaces of wood and wood based materials treating ends of posts, back of chowkats etc with tar or coal tar black paint area tarred exc 0.1sqm but n.exc 0.5sqm each complete all as specified and as directed. 43 M&L treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, back of chowkats, etc.,area n exc 0.1 sq. m each etc with tar or coal tar black paintcomplete all as specified and directed. 44 S&F stainless steel 100 mm butt hinges medium weightISI marked complete all as specified & directed. 45 S&F Aluminium anodisedbarrel tower bolts of extrudedsection 150mm long all as specified. 46 S&F Aluminium anodisedbarrel tower bolts of extrudedsection 200mm long all as specified. 47 S&F Extruded aluminium alloy handles, fabricated type,anodised 150 mm size complete all as specified and directed. 48 S& F aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed. 49 S&Fmild steel 300 mm , ordinary rat rail rod pattern springs including roller and roller plate completeall as specified and as directed. 50 S & F in repairs Aluminium (Die cast ) body door closer hydraulically regulated, designation No.2 universal type, suitable for door shutters up to 701mm to 850 mmin width and of weightbetween 36 to 60 kg complete all as specified and directed. 51 S& F140 mm over all length of cover plates floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed. 52 S&F Ball catches with 8mm dia steel ball and brass body and skirting plate including letting in and fixed overall length of cover plate 150mmcomplete all as specified and as directed. 53 M & L in repairs 20mm dia mild steel CP curtain rodswith brackets, stop rollers etc all as specified 54 S & F Stainless steel plate rack of size 24X36X10 inch fixed on wall with stainless screw with wooden plugs near the kitchen sink including all accessories and making good the disturbed wall tiles/concrete surface all as specified and directed. 55 Supply and fix in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. 56 M& Lin repairs mortice lock vertical type brass size 100 mm4 leverswith stainless steelhandleset suitable for right or left, inside or outside opening doors complete all as specified and directed. 57 S&F aluminium anodised powder coated (Minimum thickness of powder coating 50 micron) frame for doors/windows/ ventilator/partition, glazing clips with one or more rebates including joining cleats fot fixing complete all as directed by Engr-in-Charge. 58 S&F Anodised aluminium door shutterspowder coating of any colour (Thickness of powder coating not less than 50 micron), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified 59 S & Faluminium powder coated sliding window 3 trackusing aluminium section weighing not less than 0.900 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including aluminium anodised snap beads, screws andfixed along with same sectionin three rolling sliding shutters two for fully glazed with 4mm thick tinted glass fixed with glazing clips, and one for aluminium wire mesh shutters) etc(The rate is inclusive of all fixings of builders hard ware such as wirmesh, hinges, bow handles, locking arrangements etc complete all as specified and as directed. 60 S&F aluminium anodised powder coated (minimum thickness of powder coating 50 micron) window security grills DG 104 with frame 6mm thick 75 mm aperture fixed with joining cleats etc complete all as specified and as directed. 61 S&F for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc10 kg each brackets, conforming to Fe.290.Gde-E-165complete all as specified and as directed. 62 S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. 63 M&L for Prelaminated particle board 18/19 mm thick exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws as in cupboard shutter and shelves etc. In repairs including Ist class hard wood bedding all around the shutter and paints with synthetic enamel paint to beadingcomplete all as specified and as directed. 64 S & F12 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to aluminium/ timber frame work complete all as specified and as directed. 65 M&L for 6mm thick external teak wood lipping over 18/19mm thick particle board fixed with nails complete all as specified and as directed. 66 S&F in repairs continuous (piano) hinges mild steel, bright finish or electro galvanised width of flaps (When open) in mm 30mm complete all as specified and as directed. 67 Supply and Fixin repair Locks, drawer, cupboard shutters grade I, size 75 mmBrass4 levers complete all as specified and directed. 68 Dismantling floor hearth or wall tiling including cement mortar bedding(but not backing) and rubbish off the premises complete all as specified and as directed. 69 M & L for non skidcoloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed. 70 M &LNon -skidcoloured ceramic tiles7 mm to 8 mm (Square/rectangular) area of eachtilesexceeding 0.11 sqm but not exceeding0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including15 mm thick screed bed in CM 1:4 complete all as specified and as directed. 71 All as per item No. 70 above but on skirting/dado including backing coat of 10 mm thick in CM 1:4 complete all as specified and as directed. 72 M & L for ceramic mosaic exterior wall tiles of 10mm thick in multi colour and area not exceeding 0.18Sqm as approved by GE, fixed in vertical surfaces in patches such as in dado/ walls set and jointed in neat cement slurry and pointed in white or coloured cement to match tile over and including a backing coat in Cement Mortar 1:4, 10mm thick complete all as specified and as directed. 73 M & L for glazed ceramic colouredtiles in vertical surface 300x250x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 10mm thick in CM 1:4 for receiving wall tiles on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed. 74 M&L for Vitrified Ceramic light coloured tiles in Patches of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. 75 Ditto all as item No. 74 above but on vertical surfaces such as skirting, dados and risers to step etc.but providing 10mm rendering on wall in CM 1:3 complete all as specified and as directed. 76 Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15mm dia complete all as specified and as directed. 77 Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm dia complete all as specified and as directed. 78 Taking up or down steel tubing and connections including cleaning for refixing or removal to store 25mm dia complete all as specified and as directed. 79 Supply & Laying of CPVC PipesSDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings all as specified for following pipes :- (a)20mm outer dia bore 80 (b)25mm outer dia bore 81 (c)32mm outer dia bore 82 S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs including dismantling of existing tank of any descriptionand removing to store and S&F 25 mm ball PTMT Ball valve high pressure with epoxy coated aluminum rod and polyethylene high density floatscrewed for iron pipe complete all as specified and directed. 83 M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 20mm dia bore pipes complete all as specified and as directed. 84 M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 25mm dia bore pipes complete all as specified and as directed. 85 S&F in repairs toilet paper holder with flat recessed type matt chromium plated of make that shall match with existing fitting i.e, jaquar complete all as specifiedand as directed. 86 S & F in repairs 15mm Bib taps cast copper alloy,fancy type, chromium platedwith crutch or butterfly handle, screwed for iron pipe or for brass ferrulecomplete all as specified and directed. 87 S&F in repairs fortwo waybib tap 15 mm bore chromium plated with crutch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union of make Jaquar or its techno commercial equivalent in other makes complete all as specified and directed. 88 S&F in repairs fortwo waybib tap 15 mm bore chromium plated with crutch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union of make Prayag or its techno commercial equivalent in other makes complete all as specified and directed. 89 S&F in repairs 15mm dia pillar taps fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed. 90 S&F 15mm dia concealed Brass Angle stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unionand fixed in repairs of make Prayag Cat No 6510 complete all as specified and directed. 91 S&Fin repairs 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed. 92 S&F in repair Sink made out of stainless steel 1mm thick with drainage board for kitchen and laboratory with plugs washers and wastes, including beading in cement mortar to dwarf of including fixing canti lever brackets and connecting union to pipe overall size 915mmx460mm bowl size for 410mmx330mmx160mm including 40mm size CP waste coupling and PVC waste pipe complete all as specified and as directed. 93 S & F in repairs 15 mm dia bore pillar tap long neck with aerator fancy type cast copper alloy with crutch handle screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe or for brass ferrule etc completeall as specifiedand as directed. 94 S&F in repairs for 15 mm bore sink cock with swinging spout wall mounted model with wall flange of make that shall match with existing fitting i.e, jaquar complete all as specifiedand as directed. 95 S&Fin repairsWall mixer 3-in-1 system with provision for both telephone shower and over head showerand of make that shall match with existing fitting i.e, jaquar complete all as specifiedand as directed. 96 Supply and fix in repair PVC connections 15 mm size with two brass nuts of length 450 mmcomplete all as specified and as directed 97 S&F in repairs health faucet (hand shower with 1 M flexible tube with wall hook, chromium platedof make that shall match with existing fitting i.e, jaquar complete all as specifiedand as directed. 98 S&F in repairs health faucet (hand shower with 1 M flexible tube with wall hook, chromium platedof make that shall match with existing fitting i.e, prayag complete all as specifiedand as directed. 99 S&F in repairs vitreous china wash down water closet pan, dual flush system cascade dual flush selected colour with built in cistern floor mounted type with Por S trap and matching seat cover including all fittings complete all as specifiedand as directed. 100 S&F in repairs Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe & waste pipe) but including connections to flushing pipe and outgoing pipescomplete all as specifiedand as directed. 101 S&F in repairs 125mm Chromium plated brass shower roses with or without swivel joints,including fixing to steel pipe or union complete all as specified and as directed. 102 S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe, etc.and connected to water closet as per manufacturers instruction and asdirected by the Engineer in charge 103 S & Fin repairs Vitreous china wash down water closet (pedestalpattern ) white (ETWC) and fixed including Plastic seat cover, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete all as specified 104 S&F in repairs vitreous china wash basin of oval type including counter top granite platform , waste coupling, waste pipe and brackets etccomplete all as specifiedand as directed. 105 Supply and Fix in repair looking mirror 600mm x 450mm bevelled edgeon selected quality mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers and framed with aluminium channel all round etc., complete all as specified and as directed. 106 S&F in repair 20mm dia Tubular towel rail 600mm long between flanges D type brass chromium plated, fixed to wall with brass screws and wooden/plastic cleats complete all as specified anddirected. 107 S&F in repairs soap dish, matt finished chromium plated (MCH/Colour CP)of make that shall match with existing fitting i.e., jaquar complete all as specified and directed . 108 S&F in repairCabinet Mirror PTMT 400 x 500 mm with sided shelves fancy type of superior quality Cat No.554 Make : Prayag complete all as specified and directed. 109 S&F for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. Fe-410- W(Gde- E-250) quality- B(cut to ordinary lengths i.e. Within 20mm of the length indicated)complete all as specified and as directed. 110 S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gm) including taking down old one complete all as specified anddirected. 111 S & F PVC (SWR) pipes 110mmsingle socketed, in any length with rubber ringjoints laid in trenches or in floors complete including dismantling existing pipes along with fittingsall as specified anddirected. 112 S & F PVC (SWR) pipes 110mmsingle socketed, in any length with rubber ringjoints fixed to walls complete including dismantling existing pipes along with fittingsall as specified anddirected. 113 S & F PVC (SWR) pipes 75mmsingle socketed, in any length with rubber ringjoints fixed to walls / floors complete including dismantling existing pipes along with fittings all as specified anddirected. 114 S & F PVC (SWR) bends 110 mm bore any radius with oval access door complete all as specified anddirected. 115 S & F PVC (SWR) bends 75 mm bore any radius with oval access door complete all as specified anddirected. 116 S & F PVC (SWR) Junction (Single T) 75 mm borewith oval access door complete all as specified anddirected. 117 S & F (SWR) branch Single (single Y) equal or unequal for 110 mm bore pipe with oval access door complete all as specified and as directed. 118 S & F (SWR)vent cowl suitable for 110 mm bore pipecomplete all as specified and as directed. 119 M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cementcomplete all as specified and as directed. 120 Cutting holes into or through brick walls but in brick walls superficial area n.exc 150sqcm built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete. and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1complete all as specified and as directed. 121 Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed 122 M & L for 75 mm thick,plain cement concrete1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc, finishingsurface even and smooth without using extra cement complete all as specified and directed. 123 Demolition of stone slabs and tiles of any description or thickness in floors, aprons, kitchen shelfs etc( laid, bedded and pointed inany mortar) complete all as specified and as directed. 124 M&L for granite slab (of any type) 18 to 20mm thick machine cut, laid over and including 20mm thick cement screed in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone as in platforms/cooking tops including cutting and polishing etc., complete all as specified and as directed, 125 M & L for 25 mm thick,plain cement concrete1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in sub base finishingsurface even and smooth without using extra cement complete all as specified and directed. 126 Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided forcomplete all as specified and as directed. 127 M&L for Precast cover slab 1:2:4, type B1 (using 20mm graded aggregate) inlandings, cover slabs (for manholes etc.,) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4, for manholes etccomplete all as specified and as directed. Note: Reinforcement will be measured and paid seperately. 128 M/L 10mm dia and over TMT bars as in reinforecment cut to length bent to shape required including cranking hooking ends and binding with mild steel wire( annealed) not less than 0.9 mm dia (or) securing with clips all as specified and as directed 129 Taking down carefully copper/aluminium point wiringlight, fan, socket or powercomplete with fittings such as switches, ceiling roses,regulators sockets etcand making good disturbed surfaces of walls, floors to match with the existing surfacecomplete all as specified and as directed. 130 Taking down carefully by unservicable fittings of different size and capacitycomplete and making good disturbed surfaces of walls, floors to match with the existing surfacecomplete all as specified 131 M&L for point wiring of size 1.5 sqmmwith PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn through new non metallic rigid PVC conduit including accessories,concealed in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switches,sockets, fan regulators etc., including provision of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly complete for :- (a)one light point controlled by one switch 132 (b) one fan point controlled by one switch 133 (c ) one 3 pin socket outlet 5 amps on the same board controlled by one switch. 134 (d) one 3 pin socket outlet 5 amps on independent board controlled by one switch. 135 (e ) one bell/buzzer point controlled by one bell push 136 All as per item No 131 above for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed. 137 All as per item No 131 above for one 3 pin socket outlet ,15 amps control by one switch independent board with cable 4.0 sqmm size complete all as specified and directed. 138 M&L for point wiring of size 1.5 sqmm (two run) with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn throughnon metallic rigid Existing PVC conduit ,in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switches,sockets, fan regulators etc., including provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly completefor :- (a) one light point controlled by one switch 139 (b)one fan point controlled by one switch 140 (c )one 3 pin socket outlet 5 amps on the same board controlled by one switch. 141 (d) one 3 pin socket outlet 5 amps on independent board controlled by one switch. 142 All as per item No 134 above but for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed. 143 S & F for modular cover plate with frame 3 module complete all as specified and directed by Engr-in-Charge 144 S & F for modular cover plate with frame 4 module complete all as specified and directed by Engr-in-Charge 145 S & F for modular cover plate with frame 6 module complete all as specified and directed by Engr-in-Charge 146 S&F modular switches suitable fortype AC 240V, 6 amps 1 modulecomplete all as specified and directed by Engr-in-Charge 147 S&F modular socketssuitable fortype AC 240V, 6 amps 2 modulecomplete all as specified and directed by Engr-in-Charge 148 S&F modular switches suitable fortype AC 240V, 16 amps 1 modulecomplete all as specified and directed by Engr-in-Charge 149 S&F modular power sockets suitable fortype AC 240V, 16 amps 2 module complete all as specified and directed by Engr-in-Charge 150 S&F modularfan regulator suitable fortype AC 240V, 2 modulecomplete all as specified and directed by Engr-in-Charge 151 S&F modular bell switchsuitable fortype AC 240V, 16 amps complete all as specified and directed by Engr-in-Charge 152 S&F call bell of multi music type A/C 230 voltscomplete all as specified and directed. 153 S&F ceiling rose , polycarbonate, isolated bodywith 2 to 3 terminalscomplete all as specified and directed by Engr-in Charge 154 Taking down ceiling fan and exhaust fans of any size and any description including connected accessories and deposited in AGE E/M store complete all as specified and directed. 155 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator( 2 Modular) and accessories, 230 V, 1200mm sweep, Five star rated with brushless direct current motor, complete all as specified and directed 156 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m, 5 star complete all as specified and directed 157 S&F lamp holder insulated body with back plate for batten fittings/angle holdercomplete all as specified and as directed 158 S&F ofLED bulb 9 w highsuitable for lamp holder including taking down carefully unserviceable fittings and making good disturbed surfaces of walls, floors to match with the existing surfacecomplete all as specifiedand as directed.Make :Havells Cat No. LED PLUS 9W B22 CDL 2STAR LAMP or techno commercial equivalent in Philips /Bajaj 159 S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, completeall as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj. 160 S & F 10 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSBS10WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj. 161 S & F 10 Watts COOL LIGHT environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaries comprising of high brightness LEDs, incl taking down unserviceable fittings of any size and capacitycomplete and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed.Make Havells Cat No. HEXAFT10WLED857SSYMBOPC or techno commercial equivalent in Philips /Bajaj. 162 S & F 36 Watts 2x2 ceiling COOL LIGHT a versatile 2X2 recess mounted luminaires which suits various ceiling types with option to add mounting kits for POP ceiling & suspension clamp for pendant mounting from true ceiling, complete all as specified and as directed by the Engr-in-Charge. Make Havells Cat No. VENUSNEO2X2PLR36WLED865G2 or equivalent to Philips/Bajaj. 163 Taking down sub main wiringany type and any size complete after taking proper disconneting of electric supply properly andmaking surface goodcomplete all as specifided and directed 164 S&F sub main wiringcomplete with two runs of 6 sqmmPVC insulatedunsheathed single core multistrand copper conductorcable of 1100 volts grade drawnthrough new non metalic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceilingwith one run of 6 sqmm PVC insulatedunsheathed copperconductorcable as earth continuity conductor all as specified and directed by Engr-in-Charge.Note:- Two runs of PVCinsulatedcable 6 sqmm+ one run 6 sqmmof earth wire and one run of conduit including accessories shall be measured as one length. 165 S&F MCB distribution board made ofCRCA sheet, powder coatedpaint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volt 6 way MCB DB, TPN with 200 Amp rated bus bar conforming to IP 38 protectionincluding taking down old ones complete all as specified and directed. 166 S&F MCB distribution board made ofCRCA sheet, powder coatedpaint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volt 12 way MCB DB, SPN with 200 Amp rated bus bar conforming to IP 38 protectionincluding taking down old ones complete all as specified and directed. 167 S&F MCB of rating 415 Volts, TPN 100 Ampscompleteall as specified and directed by Engr-in Charge including taking downcomplete after taking proper disconnecting of electric supply properly andmaking good surfacecomplete all as specified and directed. 168 S&F MCB of rating 240 Volts, SPN 63 Ampsincluding taking downcomplete after taking proper disconnecting of electric supply properly andmaking good surfacecomplete all as specified and directed. 169 S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts including taking downcomplete after taking proper disconnecting of electric supply properly andmaking good surfacecomplete all as specified and directed.
