Tender For Certain B/R Repair In Rajesh Enclave Under Age B/R-Iv Of Ge (South) Meerut Cantt; 1 Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutters without taking off shutters from the fram complete all as specified and directed . 2 Taking down of shutter of any description exc. 1 Sqm & n.exc. 2 Sqm each complete all as specified and directed . 3 Supply & fix in repairs second class hardwood (SAL) as in plain solid straight chowkats or frames, wrought, rafter, purlins and like truss work etc framed together with glue pinned at joints, with single or double rebates or as in purlins, rafters etc complete all as specified and directed. 4 S&F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked, complete all as specified and directed. 5 M&L for gauged shutter shall be made out of angle iron 35x35x5mm, 25x25x5mm and 1.5mm thick as shown on drawing. The frame for shutter shall be of pressed steel and 10mm Square bars grill complete with fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture, including hinges, tower bolts, handles, sliding door bolts with locking arrengement and other fittings and fixtures and including two coats of synthetic enamel paint over a coat of red oxidecomplete all as specified and directed . by Engr-in -charge. 6 S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (including MS Hold Fast). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed. 7 S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. 8 S&F solid PVC Door frame of size 50mm x 47mm made out of 5mmPVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified. 9 Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II) complete all as specified and directed . 10 S&F Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified and directed. 11 S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified and directed. 12 S&F aluminium anodized handle of size 200 mm, ISI marked, complete all as specified and directed. 13 S&F aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed ISI marked complete all as specified and directed. 14 Supply and fixing of mild steel 300mm, ordinary rat tail rodpattern spring including roller and roller plate complete all as specified and directed 15 S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. 16 Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 17 Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed . 18 S&F in repair Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. 19 Hacking out old broken glass ( any thickness, size, quality or discription)from metal/wooden frames fixed with pin, beading or oil putty 20 S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading )in square n.exc 0.5 Sqm in each panes complete all as specified and directed . 21 S&F as in Figured glass, 3 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed. 22 M&L for in repair, 18/19mm thick WPC Solid board, interior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with SS screws to WPC frame work in cup boards, and kitchen cabinet rebated including 75 mm brass finished handles on each shutter and hydraulic hinges fixed with SS Screwscomplete all as specified and directed. 23 S&F in repair mortise lock including necessary arrangements for removal and fixing complete as as specified and directed 24 Supply & fix in repair 25mm dia Vista pattern of approved colour & finish fancy type curtain rod including brackets and fancy type end knobs, rings etc complete all as specified & directed. 25 S&F in repair Glass Corner Shelf fitted in wall with screws complete all as specified and directed 26 Material and labour for repairing of old wooden doors by repairing projecting/friction type hinges,handle, bolts etc as required and providing new as required complete all as specified and directed. 27 S&F Galvanized MS wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.14mm and including fixed with wooden beading for securing wire gauge with wire stappler complete all as specified and directed. 28 S&F as in repair galvanized MS wire cloth 0.45mm nominal dia of wire and average width of aperture 1.14mm and including fixed with tinned tacks, wooden beading, Metal frame for securing wire gauge with wire stappler complete all as specified and directed. 29 Supply and fixing as in repair fancy type looking mirror of size 600mmx450mm of selected quality mounted on 6mm thick ply / board fixed to wall with screw and rawl plugs, complete and approved by GE. 30 Demolition of Stone slabs and tiles of any description or thickness in floors, apronslaid and pointed in any mortor etc. 31 M&L for 14 to 16mm thick Udaipur Green Stone, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed. 32 Material & labour fornon skid coloured tiles of size600x600x8-10mm thick, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles complete all as specified & directed. 33 Material & labour fornon skid coloured tiles of size600x600x8-10mm thick, coloured, as in skirting set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 10mm thick rendering of CM (1:4) including Dismantling of old tiles complete all as specified & directed. 34 Material & labour for non-skid coloured ceramic tiles of size400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including dismantling of old tiles complete all as specified & directed. 35 Material & labour for glazed coloured ceramic tiles of size450x300x7-8mm thick,on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:6 including dismantling of old tiles complete all as specified & directed. 36 Material & labour For vitrified coloured tiles of size1200x600 xthickness not less than 8 mm, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles complete all as specified & directed. 37 Material & labour for vitrified coloured tiles of size1200 x 600 x thickness not less than 8 mm, coloured, as in skirting set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 10mm thick rendering of CM (1:4) including Dismantling of old tiles complete all as specified & directed. 38 M&L for PCC 1:3:6 type C1 , 50 mm thick (20 mm graded stone aggs) as in plinth protection including finished surfaces even and smooth without using extra cementcomplete all as specified and directed. 39 Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed. 40 Material and labour for 12 mm thick rendering in Cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. 41 M & L for rendering 10 mm thick in CM (1:3) as in ceiling /facia finished even and fair all as specified and directed. 42 Materials & labour for perparation of new wall surface and finishing the surfaces of wall with 1 mm thick putty and applyingtwo coat of Oil Bound distemper, any colour, complete all as specified & directed. 43 M&L for three coats of white washing on newceiling/chajja surfaces including preparation ofcomplete all as specified and directed. 44 M& L for Preparation of existing walls and applying one coat of oil bound distemper incl repair work like putty, plaster and preparation of required area with primer or extra coat of OBD to merge with existing area of OBD as per requrement on walls including Washing, rubbing down and stopping of distempered,painted surfaces on wallsall as specified and directed. 45 Material & labour for in preparation of old white wash surfaces and applying one coat of white wash on ceiling all as specified and directed by Engr-In-Charge.. 46 Supply & fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed. 47 Supply, fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed. 48 Material & Labourfor Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edgesand cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth complete all as specified and directed. 49 Taking up or down 15 mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed 50 Supplying and laying of CPVC pipes 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,including all fitttings complete all as specified. complete all as specified and directed 51 Supply & fixing in rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mmPVCball valve including dismantling existing water tanks complete all as specified & directed. 52 S&F as in repair 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed. 53 Supply & fix in repair wall mixer telephonic with crutch brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm borepipes with telephonic with crutch (Provision for hand shower) complete all as specified and directed. 54 S&F as in repairchromium plated Angle stop valve incl flange, any description, suitable for 15 mm bore pipe,complete all as specified. 55 S&F as in repair vitreous china wash downwater closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed. 56 Supply and fixingas in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc, set with concrete and making good to floor. complete all as specified. 57 Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed. 58 S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified. 59 Supply & fix in repairs chromium plated shower roses with swivel joints of 75mm sizecomplete all as specified & directed. 60 S&F in repair chromium plated Jet spray with suitable flexible pipe to EWC for 15mm bore with fittings, complete all as specified and directed. 61 S&F in repair chromium plated health foucet with 1.00 mtr flexible pipe for 15mm bore with fittings, complete all as specified and directed. 62 Supply & fix in repairs PVC connections of 450mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. 63 Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed. 64 S&F in reipair CP towel rail brass 20mm dia 600mm long CP finish complete all as specified & directed. 65 S&F in repairs for 20mm bore PTMT float valve with epoxy coated aluminium rod & high density plastic ballscrewed for iron pipe and fixed (minimum weight 140gms) complete all as specified and directed . 66 S&F in repairGun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified and directed . 67 S&F in repairGun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed . 68 Supply & fix in repairs steel C.P. grating 100/125 mm diawaste pipe hole fitted as required at site complete all as directed by Engineer-in-Charge. 69 S&F 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed. 70 S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered Hot or Cold ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed in repair complete all as specified and directed . 71 S&F in repair CP bibtap for sink, long shank, swan neck with swinging spout (Wall mounted model) complete all as specified and directed . 72 S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. 73 S&F in repair cast copper alloy spindle brassdisc 3/4 for CPwall mixer, WHB mixer and sink mixer pillar tap / bib taps / angle cock, etc suitable for MAP Accn or other Accn as per samle given from AGE B/R-IV complete all as specified and directed. 74 S&F in repair brass choromium plated extension nipple of size 25 to 50 mm for CP bib taps/angle cock etc complete all as specified and directed.
