Tender For Repairs To Certain Misc Wooden And Steel Furniture Items At Bso (N) Under Ge (N) Secunderabad.; 1 BOOK CASE: FD-237:Removing of old u/s top from book Case and S&F new top ofsize 1200 mmx 300mm made out of 18mm thickplywood BWR Grade , IS -303 complete as shown on drg,as specified and directed by Engineer-in-Charge. 2 All as per Item Sl No1.01 here in before but for Bottom ply of Book Case. complete as shown on drg,as specified and directed by Engineer-in-Charge. 3 Taking down old & u/s shutters frombook Case and S&F new shutters of size of 380mmx622mm made out of 18mm thick ply wood BWR grade with fixing of flat teak wood beadingall around the shutter complete as shown on drg,as specified and directed by Engineer-in-Charge. 4 Taking down old & u/supper shelf frombook Case and S&F new upper shelf of size 820mmx 205mm made out of 18mm thickplywood BWR Grade with teak wood beading alround the shelf ; top portion of shelfshall be covered with 1mm thick veneer sheet of approved shade complete as shown on drg,as specified and directed by Engineer-in-Charge. 5 Removing old unsv/ brokenhinges from shutterand S&F new piano type pino continuous hinges of size 20-25mm to both door shutter complete as shown on drg,as specified and directed by Engineer-in-Charge. 6 Removing old unsv/ brokenknobs fromdoor shutterand S&F newknobs as per sample approved by Engg-in-Charge/ GE complete as shown on drg,as specified and directed by Engineer-in-Charge. 7 Remove old unsv plywood back from Book case & S&F newback of6mm thickply woodBWR Grade of size 1200mmx 660mm complete as shown on drg,as specified and directed by Engineer-in-Charge. 8 Removingold & u/s legs and rail from Book case and S&F new legs of size 45mmx45mmx100mm and rails of size 40mmx25mm x860mmmade out of well seasond teakwood complete as shown on drg,as specified and directed by Engineer-in-Charge. 9 Removingold & u/srail from Book case and S&F new rails of size 40mmx25mm x860mmmade out of well seasond teakwood complete as shown on drg,as specified and directed by Engineer-in-Charge. 10 Removing of old u/s sides from Book Caseand S&F new sides of size 300mm x 660mm made out of 18mmplywood BWR Grade 11 Removing of all u/s beading from front portion of Book Case & S&F new 4mm thick19mm wideteak wood beadingto complete front portion of Book Case complete as shown on drg,as specified and directed by Engineer-in-Charge. 12 S&F 4mm vineer sheetof approved shadeto entirebottom, sides, shelves, door shutterof Book case complete as shown on drg,as specified and directed by Engineer-in-Charge. 13 M&L Preparation of wooden surfaces and applying 02 coats of French polish of approved shadeon wood surfaces of side board expose to view complete as shown on drg,as specified and directed by Engineer-in-Charge. Note: The Drg No FD-237 is applicable for item Nos. 1.01 to 1.13 14 Side Board Drg No FD- 241,371Removing of old u/s top from side board and S&F new top of size 1220mm x455mm made out of 18mm thick plywood BWR Grade complete as shown on drg,as specified and directed by Engineer-in-Charge. 15 All as per Item Sl No 2.01 here in before but for Bottom ply of side Board. complete as shown on drg,as specified and directed by Engineer-in-Charge. 16 Taking down old & u/s door shutters from side board and S&F new door shutters of size 635mmx417mm made out of 18mm thickplywood BWR Gradeincluding fixing of flat teakwood beadingall around the shutter complete as shown on drg,as specified and directed by Engineer-in-Charge. 17 Removing old unsv/ broken handle / knobs fromdoor shutterand S&F 100mm long SS handleas per sample approved by Engg-in-Charge/ GE complete as shown on drg,as specified and directed by Engineer-in-Charge. 18 Removing old unsv/ broken handle / knobs fromdrawers and S&F new knobs for drawers as per sample approved by Engg-in-Charge/ GE complete as shown on drg,as specified and directed by Engineer-in-Charge. 19 Removing old unsv plywood back from side board and S&F newback of6mm thickplywood BWR Grade of size1220mm x 635mm complete as shown on drg,as specified and directed by Engineer-in-Charge. 20 Removingold & u/s drawers from side board and S&F new drawers of existing shape,size made out of 6mm& 12mm thick plywood ISI marked BWR Grade complete as shown on drg,as specified and directed by Engineer-in-Charge. 21 Removing of old u/s sides from side board and S&F new sides of size 455mm x 635mm made out of 18mm thick plywood BWR Grade complete as shown on drg,as specified and directed by Engineer-in-Charge. 22 S&F 4mm vineer sheetof approved shadeto entirebottom, sides, shelves, door shutterof side board complete as shown on drg,as specified and directed by Engineer-in-Charge. 23 Removingold & u/s legs from side board and S&F new legs of existing shape,size made out of well seasond teakwood complete as shown on drg,as specified and directed by Engineer-in-Charge. 24 Removing old unsv/ brokenhinges from shutterand S&F new piano type continuous hinges of size 20-25mmas per sample approved by GE for both door shutter complete as shown on drg,as specified and directed by Engineer-in-Charge. 25 Removing of u/s locks from the door shutters of side board and S&F new lockssuitable for side board with duplicate keys complete as shown on drg,as specified and directed by Engineer-in-Charge. 26 Removing of all u/s beading from front portion of side board and S&F new 4mm thick, 18mm wide teak wood beading of semi round shape to complete front portion of side board complete as shown on drg,as specified and directed by Engineer-in-Charge. 27 M&L Preparation of wooden surfaces and applying 02 coats of French polish of approved shadeon wood surfaces of entire side board complete as shown on drg,as specified and directed by Engineer-in-Charge. Note: The Drg No FD-241 &FD-371 is applicable for item Nos. 2.01 to 2.14 28 CHARPOY GI NYLON NEWAR / PLY TOP (FD-220) Removal of old broken/ unsv plywood of charpoy GI pipe and S&F new 12 mm thickBWR grade ply of size 1980mmx900mm as per IS-303on cleats welded on rails. S&F 02 Nos new Flat iron strip for each charpoy of size 900mmx30mmx5mm thick as per sample approved duly welded to each charpoyon two long railstogather on appropriate position of charpoy with providing newnut & bolts with washer including providingEdges of Ply should be prepared with puttyfor moisture resistance. New Flat Iron strip shall be painted with synthetic enameled paint in black colour over a coat ofred oxided primer.Corners of plywood top should be rounded off properly before fixing on charpoy complete as shown on drg, as specified andand directed by Engineer - in -Charge. 29 S&F02 Nos cleats of iron angle of size 25mmx25mmx5mm, 50mm long as per sample approved on each long rails and 02 Nos cleats on each short rails duly running welding on approprite position as directed by Engr-in-Charge including drilling hole in each cleats duly painted with synthetic enameled paint black colour complete as shown on drg, as specified andand directed by Engineer - in -Charge. 30 Removal of old broken/unsv GI elbow three wayfrom existing frame of Charpoy GI pipe and S&Fnew elbow GI three way 32mm bore medium grade subject to approval of sample complete ISI markedcomplete as shown on drg, as specified andand directed by Engineer - in -Charge. 31 Removal of broken/ unsv check nuts from existing frame of charpoy GI pipe and S&F new check nuts GI 32mm bore medium grade ISI marked subject to approval of sample complete as shown on drg, as specified andand directed by Engineer - in -Charge. Note: The Drg No FD-220 is applicable for item Nos.3.01 to 3.04 32 Chair Revolving FD/E6/MAP/01 / TP: Removing unsv / damagedGas lift of chair and S&F new Gas lift 15 inch long with minimum adjustable rangearound 5 inches all as per sample as approved complete as shown on drg, as specified andand directed by Engineer - in -Charge. 33 Removing old unsv / broken pedestal assy and S&F new stainless steel pedestal assy with castor wheel as per sample approved as shown on drg, as specified andand directed by Engineer - in -Charge. 34 Removing old unsv foam cushion and tapestry cloth of seatof chair and S&F new seat made out of 40 Density foam cushion of 75 mm thick of Make: Kurn on/ sleepwel/ Duroflex upholstered with tapestry cloth of approved shade of Make : Bombay dying/ vivid collection/ D Decor duly stiched complete with fixing ofPVC lipping around the border of chair complete as shown on drg, as specified andand directed by Engineer - in -Charge. 35 Removing old unsv foam cushion and tapestry cloth of Backof chair and S&F new back made out of 40 Density foam cushion of 75 mm thick of Make: Kurn on/ sleepwel/ Duroflex upholstered with tapestry cloth of approved shade of Make : Bombay dying/ vivid collection/ D Decor duly stiched complete with fixing ofPVC lipping around the border of chair complete as shown on drg, as specified andand directed by Engineer - in -Charge. 36 Remove old unsv Arms of chair revolving and S&F newscrach proof wheather resistant PU Arms suitable for chairas per sample approved by Engg in Charge /GE.Note: The Drg NoFD/E6/MAP/01 / TP is applicable for item Nos.4.01 to 4.05
