Tender For Repair And Maintenance Of Misc Furniture Articles Of Otm Accn Under Ge (North) Meerut; 1 BED PLY TOP (Drg No FD-246 & 247)Removing of old unserviseable plywood top from Bed ply top and S&F new top of same size of 12mm thick ply wood (ISI marked), BWP (IS:710) grade of appropriate size with screws complete all as shown on drawing and as directed. 2 Removal of old unserviceable long rail from bed and S&F new long rail with rounded edges of size 1980 mm x 90mm x 35 mm of hard wood teak and fixing the same as shown on drawing including one coat of french polish after preparing the surface by sand paper complete all as specified and as directed by Engr-In-Charge/GE. 3 All as per srl item No. 1.01 here-in-before but short rail of size 60mm x 60mm of suitable length. 4 All as per srl item No. 1.01 here-in-before but stiffener of size 60mm x 60mm of suitable length. 5 Removing of old unserviceable ply wood from the existing head rest of Bed ply top and S & F new OSTF plywood 04mm thick ISI marked,BWP (IS:710) grade to both sides of head rest including 04mm thick teak wood beading all aroundas per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete. 6 All as per srl item No 1.04 here-in-before but foot rest. 7 Removing of old unserviceable head rest from bed ply top and S&F new head rest made out of Ist class hard wood including provision of 04 mm thickone side teak faced plywood and teak wood beading04 mm thick as per shape and size shown in drawing and fixed with nails duly french polished with both side MNF arrangement and fixing the same. 8 BIN LINEN MULTIPURPOSE (Drg No FD/E6/MAP/09)Removing of old unserviceable top from bin linen multipurpose and supply and fixing new top made out of 18 mm thickBWP (IS:710) plywood with both side lamination with colour / shade as approved by Engr-in-Charge / GE. 9 Removing of old and unserviceable door shutters of bin linen multipurpose S&F of new door shutters made of 18 mm thickBWP (IS:710) plywood with both side lamination as shown on drawing and as directed. 10 Removing of old unserviceable hingses and S&F of new hinges to bin linen multipurpose as per size and design shown on drg complete all as specified and directed. 11 Removing of old broken handles and S&F of new chromium plated steel handles to bin linen multipurpose as persample kept at BSO (Office) & as shown on drg and as directed. 12 Removing of old magnetic catcher and S&F of new magnetic catcher (EBCO/Godrej/Hettich) to bin linen multipurpose as per size and design shown on drg complete all as specified and directed by Engr-in-charge/GE. 13 CHAIR DINING (Drg No FD--203/228/279/1105)M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg,specified and as directed by the Engineer-in-Charge/GE. 14 All as per srl No 3 here-in-before butfront leg 15 All as per srl No 3 here-in-before but side rail 16 All as per srl No 3 here-in-before front/ back rail 17 All as per srl No 3 here-in-before but stiffner 18 All as per srl No 3 here-in-before but back strip 19 S & F new hard PVC shoe of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge/GE. 20 CHAIR DINING ORs (MAP) (FD/MAP-II/04)M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg,specified and as directed by the Engineer-in-Charge/GE. 21 All as per srl No 4.00 above butfront leg 22 All asper srl No 4.00 above but side rail 23 All asper srl No 4.00 above front/ back rail 24 All asper srl No 4.00 above but stiffner 25 All asper srl No 4.00 above but back strip 26 S & F new hard PVC shoe of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. 27 Removing of old unsv/ troneout PVC seats from chairs and providing holes all round on top of rails in equal distance for caning as per Drg No FD-279. 28 CHAIR EASY (Drg No 229)M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg,specified and as directed by the Engineer-in-Charge/GE. 29 All as per srl No 5.00 above but front leg 30 All as per srl No 5.00 above but side rail of seat frame 31 All as per srl No 5.00 above but front or back rail of seat frame 32 All as per srl No 5.00 above but side rail of back frame 33 All as per srl No 5.00 abovebut top or bottom rail of back frame 34 All as per srl No 5.00 above but replacement of arm rest 35 S & F new hard PVC shoe of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. 36 Recanning of wooden chair of different sizes with 2mm wide cane having 3mm wide plastic cane border in Godrej pattern all as shown on drawing. (Eg :- Chair Dining,Chair writing,Chair Easy CB etc.) 37 HAT STAND WITH MIRROR (Drg No FD-233)Removing old broken/unserviceable teak plywood from front frame of hat stand and S&F new 04mm thick OSTFBWP (IS:710) plywood as per shape and size shown in drawing including melamine polishing to match the other parts complete all as specified and directed by Engr-in-charge/GE. 38 Removing of old unserviceable aluminium/ brass pegs from hat stand and S&F new brass pegs of size 120x75mm (overall) to hat stand complete all as per drawing, as specified and as directed by Engr-in-charge/GE. 39 PEG TABLE (Drg No FD-277)Removing old unserviceable top from peg table and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed with 0.8mm thick laminates colour / shade as approved by GE.2mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed by Engr-in-charge/GE. 40 Removing ofold unserviceable leg from existingpeg table and S&F the same size newleg made out of Ist class hard wood teak to Peg table duly french polished all as shown on drawing and as directed by Engineer-in-Charge. 41 All as per srl item No 8.01 here-in-before but long top rail. 42 All as per srl item No 8.01 here-in-before but short/ bottom rail. 43 All as per srl item No 8.01) here-in-before but stiffener of Peg table. 44 SOFA SET 05 SEATER WITH CUSHION (Drg No FD-281 / FD/MAP-II/02)S&F foam cushion of size 22 x 21 of thickness 100mm and 40 density complete all as per drawing, as specified and as directed by Engr-in-Charge/GE. 45 Removal of tapestry cloth cover from existing foam cushion of seat/ back of Sofa set 05 seater and providing new cover of foam cushion of approved shade of rate not less than Rs. 450/- per meter duly stitched and fixing the same all as directed.The cover shall be removable duly provided with ZIP in such a way that ZIP is not visible (overlapped with cover fabric) as directed by Engr-in-charge (sample of tapestry cloth shall be approved by the GE). 46 TABLE DINING 6 PERSONS (Drg No FD/E6/MAP/03 ) Removing of old unserviceable top from table and supply and fixing new top made out of 18 mm thickBWP (IS:710) plywood duly post formed with 0.8mm thick laminates of colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and/ or directed by Engr-in-Charge/GE. 47 All as per srl item No 10.00 here-in-before but long rail for Table Dinging 6 Person made out of Ist class hard wood teak. 48 All as per srl item No 10.00 here-in-before but short rail made out of Ist class hard wood teak. 49 S& F new bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws. 50 TABLE 3’ x 3’ (900 x 900 x 760 mm) (Drg No FD-291) or similarRemoving of old unserviceable top from Table and supply and fixing new top made out of 18 mm thickBWP (IS:710) plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all , as specified and/ or directed by Engr-in-Charge/GE. 51 All as per srl item No 11.00 here-in-before but leg made out of 1st class hard wood. 52 All as per srl item No 11.00 here-in-before but rails made out of Ist class hard wood teak. 53 S&F bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws. 54 TEAPOY (Drg No FD-34/ 232/ 278/382)Removing of old unserviceable top from Table and supply and fixing new top made out of 18 mm thickBWP (IS:710) plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all, as specified and/ or directed by Engr-in-Charge/GE. 55 All as per srl item No12.00 here-in-before but leg made of 1st class hard wood. 56 All as per srl item No 12.00 here-in-before butlong rail made out of Ist class hard wood teak. 57 All as per srl item No 12.00 here-in-before butshort rail made out of Ist class hard wood teak. 58 All as per srl item No 12.00 here-in-before butstiffner made out of Ist class hard wood teak. 59 S&F hard PVC shoe/ ring with suitable screws for fixing. 60 TABLE 900 x 600 mm with / without drawer (Drg No) FD-223/ 224/ 283/ 284) Removing of old unserviceable top from Table and supply and fixing new top made out of 18 mm thickBWP (IS:710) plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all , as specified and/ or directed by Engr-in-Charge/GE. 61 All as per srl No 13.00 above but leg made out of 1st class hard wood 62 All as per srl No 13.00 above but replacement of long rail made out of Ist class hard wood teak. 63 All as per srl No 13.00 above but replacement of short rail made out of Ist class hard wood teak. 64 All as per srl No 13.00 above but replacement of drawer with fittings 65 All as per srl No 13.00 above but replacement of bottom centre stiffener 66 All as per srl No 13.00 above but replacement of bottom side stiffner. 67 S & F new hard PVC shoe of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge/GE. 68 TABLE DRESSING LADIES WITH MIRROR (Drg No FD-251/ FD/MAP-II/07) or similarRemoving of old unserviceable looking mirror from table dressing ladies and fixing new looking mirror of size 1200 x 450 x 5mm thick of modi-gurard duly fixed in and including frame of teak wood and polishing complete in all respect to fix on wall all as shown on drawing, as specified and as directed by Engr-in-Chief/GE. 69 Removing old broken/unserviceable knob from table dressing ladies and S&F new 40 mm size CP brass knob as per shape and size shown in drawing and as directed. 70 Removing old broken/unserviceable sliding glass from table dressing ladies and S&F new 05mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed. 71 Removing old broken/unserviceable legs from table dressing ladies and S&F new legs ofIst class hard wood teak as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed. 72 Removing old broken/unserviceable laminates from the top of table dressing ladies and S&F new 1.5 mm thick laminates of best quality fixed with fevicoal as per shape and size shown in drawing complete all as specified and directed. 73 Removing old broken/unserviceable laminates from the drawer of table dressing ladies and S&F new 1.5 mm thick laminates of best quality fixed with fevicoal as per shape and size shown in drawing complete all as specified and directed. 74 TABLE CENTRE (Drg No FD No -274)Removing of old unserviceable top from Table Centre and supply and fixing new top made out of 18 mm thickBWP (IS:710) plywood duly post formed with 0.8mm thick laminates of colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed by Engr-in-Charge/GE. 75 Replacement ofold unserviceable leg from existing table centre and S&F the same size newleg made out of Ist class hard wood teak to table centre duly french polished all as shown on drawing and as directed by Engineer-in-Charge. 76 All as per srl item No 15.01 above but long rail. 77 All as per srl item No 15.01 above but short rail. 78 All as per srl item No 15.01 above but stiffener of table centre. 79 Chair Dining Offrs (MAP) (Drg No FD/E6/MAP/04)M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg,specified and as directed by the Engineer-in-Charge/GE. 80 All as per srl No 16.00 above butfront leg 81 All as per srl No 16.00 above but side rail 82 All as per srl No 16.00 above front/ back rail 83 All as per srl No 16.00 above but stiffner 84 All as per srl No 16.00 above but back strip 85 M&L for removal of unsv seat of chair, S & F of new foam cushion 50mm thick 40 density for seat and duly covered with superior quality cloth, fixed with removable 12mmBWP (IS:710) grade ply wood as specified in drg and as directed and approved by Engr in charge/GE. 86 TABLE WRITING (Drg NoFD-33, FD-275)Removing of old unserviceable top from Table Writing and supply and fixing new top made out of 18 mm thickBWP (IS:710) plywood duly post formed with 0.8mm thick laminates of colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed by Engr-in-Charge/GE. 87 Replacement of Legs of to be made out of Ist class Teak wood well seasoned and fixed as per drg. 88 Replacement of Stiffener, to be made out of Ist class Teak wood well seasoned 89 Replacement of Door Shutters to be made out of18 mm thick plywood (BWP, IS:710) laminted both sides duly fixed with 2mm PVC edge-binding allround and CP Brass knobs and piano type hinges 4 mm thick with 4 lever 40 mm brass lock. 90 Replacement ofback of table writingwhich shall bemade out of 06 mm thickcommercial ply wood ISI marked 91 Replacement of Drawers of table writing to be made out of 18mm Plywood (BWP, IS:710) duly laminated both sidesand 2 mm thick edge-bindingto be fixed and provided one knob. 92 Replacement of Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 20mm long screw wood steel ISI marked. 93 BED HARD STEEL :- (Drg No FD - E6/MAP/08(R)Removing of old and unserviceable Plytop from Bed Hard and S&F of new 12mmthick plytop of suitable size, BWP IS:710 of approved quality with 10 Nos stainless steel half round nnuts & bolts all as shown on drawing and as directed. 94 Removing of old unserviceable head board from Bed Hard and S&F new head boardmade of18 mm thick Plywood BWP Grade both laminated with colour/ shade approved by GE/ Engr-in-Chrge. All as per size and design shown on drawing and as directed. 95 All as per Sr.item No. 18.01 above but foot board of Bed hard. 96 S&F in replacement hard rubber shoes at each corner of long rail of Bed hard steel all as shown on drg. 97 S&F in replacement hard rubber shoes at the top of leg of of Bed hard steel all as shown on drg. 98 S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel all as shown on drg. 99 Welding to broken joints of bed hardall as directed . 100 CHAIR VERANDAH :- (Drg No FD - 359 & 256) Cutting and removing of old cane from Chair verandah and preparation of surfaces by application of paint remover and grinding machine and applying two coats ofsynthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04 mm wide of approved quality in Godrej Pattern complete all as per drawing, as specified and as directed by Engr-in-Chief/GE. 101 M&L for Welding to broken joints of Chair verandahcomplete all as per drawing, as specified and as directed. 102 S&F in replacement PVC shoes to Chair Verandah complete all as per drawing, as specified and as directed. 103 CHAIR VERANDAH (MAP) :- (Drg No FD - MAP-II/06, MAP-II/15)Cutting and removing of old / unserviceable PVC Sheet from Chair verandah,preparation of surfaces by application of paint remover and grinding machine and applying two coats ofsynthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04 mm wide of approved quality in Godrej Pattern complete all as per drawing, as specified and as directed by Engr-in-Chief/GE. 104 M&L for Welding to broken joints of Chair verandahcomplete all as per drawing, as specified and as directed. 105 S&F in replacement PVC shoes to Chair Verandah complete all as per drawing, as specified and as directed. 106 CHAIR COMPUTER :- (Drg No FD - E/6/MAP/01)M&L for Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed on frame with screws and covered with 40mm thick U foam over shape and tapestry cloth. Fixing shall be all as per drawing and including all minor repairs and welding etc. complete all as specified and as directed by Engineer-in-Charge. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE)complete all as per drawing, as specified and as directed. 107 M&L for Removing of old/unserviceable tapestry cloth from seat and back of existing Chair Computer and S&F new tapestry cloth to seat and back of Chair Computer (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE) complete all as per drawing, as specified and as directed. 108 M&L for Replacement of unserviceable hydraulic system of Chair Executive for the adjustment of height complete all as per drawing, as specified and as directed. 109 M&L for Replacement of old, unserviceable/ broken wheel base of Chair Executivecomplete all as per drawing, as specified and as directed. 110 Removing old/unserviceable twin castor wheel from chair and S&F new twin wheel castorsas per existing shape and sizecomplete all as per drawing, as specified and as directed. 111 M&L for Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static basecomplete all as per drawing, as specified and as directed. 112 CHAIR WRITING :- (Drg No FD - E6/MAP/12) M&L for Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed to frame with screw and covered with 40mm thick U foam over shape and tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs with welding to steel frame etc (Note :- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter and as per sample approved by GE)complete all as per drawing, as specified and as directed. 113 M&L for Removing of old/ unserviceable tapestry cloth from seat and back of existing Chair Writing and S&F new tapestry cloth to seat and back of Chair Writing(Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE) complete all as per drawing, as specified and as directed. 114 M&L for Welding to broken joints of Chair writingcomplete all as per drawing as specified and as directed. 115 S&F in replacement hard PVC shoes to Chair writing.complete all as per drawing, as specified and as directed. 116 M&L for Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as per drawing, as specified and as directed. 117 TEAPOY VERANDAH :- (Drg No FD - 255)M&L for Removing of old unserviceable top from Teapoy Verandah and new top made out of 18 mm thick BWP plywood (IS:710) duly post formed, colour / shade as approved by GE.2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and as directed. 118 M&L for Replacement of unserviceable flat iron frame with FI 25 x 5 mm thick of required size as per drg. The fixing and finishing shall be done in accordance with drawing specificationscomplete all as per drawing, as specified and as directed. 119 M&L for Welding to broken joints of Teapoy verandahcomplete all as per drawing, as specified and as directed. 120 S&F in replacement PVC shoes to Teapoy verandahcomplete complete all as per drawing, as specified and as directed. 121 TEAPOY VERANDAH :- (Drg No FD - E6/MAP/17)Removing of old unserviceable top from Teapoy Verandah and S&F of new top made out of 18 mm thick BWP plywood (IS:710)duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and as directed. 122 M&L for Welding to broken joints of Teapoy verandahcomplete all as per drawing, as specified and as directed. 123 S&F in replacement PVC shoes to Teapoy verandahcomplete complete all as per drawing, as specified and as directed. 124 Removing of old/unserviceable jali from existing Teapoy Verandah and S&F new Jaliincluding two coat of synthetic enamel paint (black in colour)complete all as per drawing, as specified and as directed. 125 TABLE BED SIDE (OFFICERS) :- (Drg No FD - E6/MAP/15(R)Replacement of upper drawer made out of 18 mm thick BWP plywood with both side lamination & 2mm PVC edge-binding as per colour/ shade approved by GE/Engr-in-Charge. 126 Replacement of Lower drawer made out of 18 mm thick BWP plywood witrh both lamination with colour/ shade as approved by GE/Engr-in-Charge & soft close telescopic channel of best quality as approved by Engr-in-charge. 127 Removing of old unserviceable top from table bed side and supply and fixing the new top made out of 18 mm thick BWP grade plywood IS:710 with both side lamination with colour / shade as approved by GE/ Engr-in-Charge. 128 All as per srl item No. 25.02 above but side of table bed side. 129 Removing of old unserviceable back ply of table bed side and supply and fixing the newback ply of same size made out of 06mm thick plywood both side laminated all as shown on drawing and as directed by Engineer-in-Charge. 130 Removing of old/unserviceable handle from the table bed side and supply and fixing new CP steel handle 100mm long as per sample, shape and sizeas directed by Engr-in-charge/GE. 131 LOCKER BED SIDE STEEL :- (Drg FD - 257)Replacement of old unserviceable hasp and staple with new 100mm long MS chromium plated hasp and staple all as shown drgand as directed. 132 M&L for Replacement of old unserviceable bow handle with new 100mm long CP steel bow handlecomplete all as per drawing, as specified and as directed. 133 M&L for Replacement of unserviceable conduit pipe with new CP steel conduit pipe of suitable size of 20mm dia having wall thickness 1.25mm to locker steelcomplete all as per drawing, as specified and as directed. 134 M&L for Replacement of unserviceable socket with new aluminium socket/brackets suitable for MS 20mm dia conduit pipescomplete all as per drawing, as specified and as directed. 135 S&F Removing of old unserviceable foot rest from locker bed side steel andnew foot rest made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points and applying one coat of synthetic enamelolive green paint with spray machine over a coat of primer after preparation of surfacescomplete all as per drawing, as specified and as directed. 136 All as per item Sl No 26.00 above here-in -before but bottom sheet of locker bed side steelcomplete all as per drawing, as specified and as directed. 137 Removing of old unserviceable MS hinges of locker bed side steel and S&F new MS hinges 65 mm long with gas welding / reviting complete complete all as per drawing, as specified and as directed. 138 CHAIR REVOLVING LOW BACK (STEEL) :- (Drg No FD - TP)Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood covered with 75mm thick U foam and best quality of tapestry cloth. The back shall be 6mm thick plywood fixed on frame with screwes and covered with 40mm thick U foam over shape and best quality of tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs and welding etc complete all as specified and as directed by Engineer-in-Charge. Note :- The tapestry cloth of rate ranging between Rs. 250/- to Rs. 275/- per meter as per sample approved by GE. 139 Removing of old/unserviceable tapestry cloth from seat and back of existing Chair Revolving and S&F new tapestry cloth to seat and back of Chair Revolving complete all as specified and as directed by Engineer-in-Charge. Note:- The tapestry cloth of rate shall not be less than Rs. 175/- per meter as per sample approved by GE. 140 Replacement of unserviceable hydrulic system of Chair revolving for the adjustment of height all as directed by the Engineer-in-Charge/GE. 141 Replacement of old ,unserviceable/broken wheel base of Chair revolvingall as directed by the Engineer-in-Charge/GE. 142 Removing old/unservicavle twin castor wheel from chair and S & F new twin wheel castorsas per shape and sizecomplete all as specified and directed by Engr-in-Charge/GE. 143 Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base all as directed by Engr-in-Charge/GE. 144 CHAIR SCHOOL WITH HAND BOARD :- (Drg No FD - E6/MAP/05)Removing old/unserviceable one piece PVC seat & back from chair school with hand board and S & F new one piece PVC seat and back of best quality as per shape and size shown in drawingcomplete all as per drawing, as specified and as directed by Engr-in-Chief/GE. 145 Removing old/unserviceable hand board top from chair school with hand board and S&F new top of 18mm ply wood (BWP IS:710) of colour / shade as approved by GE/Engr-in-Charge with PVC edging and screw to 25 mm hollow steel pipe inserted in 20 mm complete all as per drawing, as specified and as directed. 146 M&L for Welding to broken joints of Chair school with hand board complete all as per drawing, as specified and as directed. 147 S&F in replacement PVC shoes to Chair school with hand boardcomplete complete all as per drawing, as specified and as directed. 148 CHARPOY WITH HARD TOP :- (Drg No FD - MAP-II/01)Removing of old and unserviceable Plytop from Charpoy with hard top and S&F of new 12 mm thick BWP plywood of suitable size, ISI marked, BWR phenol bonded plywood with unpolished edging of approved quality all as directed by Engr-in-Charge/GE. 149 S&F in replacement hard rubber shoes at the bottom of Charpoy with hard top all as showncomplete all as per drawing, as specified and as directed. 150 TABLE COMPUTER Removing of old unserviceable top from Table Computer and supply and fixing new top made out of 18 mm thickBWP (IS:710) plywood duly post formed with 0.8mm thick laminates of colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all, as specified and/ or directed by Engr-in-Charge/GE. 151 Removing of old unserviceable bottom from Table computer and supply and fixing the new bottom of same size made out of18 mm thickBWP (IS:710) plywood with both side lamination with allround PVC edging all as shown on drawing and as directed. 152 All as per Srl item No 30.00 here-in-before but vertical board on side of Table computer. 153 All as per Srl item No 30.00 here-in-before but keyboard tray of Table computer. 154 All as per Srl item No 30.00 here-in-before but drawer of Table computer. 155 All as per Srl item No 30.00 here-in-before but pull out mouse tray of Table. 156 Removing of old unserviceable telescopic channel of key board and supply and fixing new soft-close steel telscopic channel to Table computer as directed by Engineer-in-Charge. 157 All as per Srl item No 30.00 here-in-before but telescopic channelfor drawer of Table computer as directed by Engineer-in-Charge. 158 All as per Srl item No30.00 here-in-before buttelescopic channelfor pull out mouse tray of Table computercomplete all as per drawing, as specified and as directed. 159 S&F new Nylon buffers to Table computercomplete all as per drawing, as specified and as directed. 160 S&F new knobs to Table computercomplete all as per drawing, as specified and as directed. 161 PolishingM & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of Polyurathane polish of approved make with high glossy finish after applying putty/ filler/ sealer complete all as specified and as directed by Engr-in-Chief/GE. 162 Table Dining 06 Person (Drg No FD-273 / FD/E6/MAP/03) 163 Table Dining 08 Person (Drg No FD-273 / FD/E6/MAP/03) 164 Table Dining 1200 x900 (JCOs/OR) complete all as specified and as directed(Drg No FD/E6/MAP/03) 165 Peg Table complete all as specified and as directed(Drg No FD-277) 166 Table 3 x 3 (900 x 600 x 760 mm) complete all as specified and as directed(Drg No FD-291) 167 Table 900 x 600 mm with / without drawer complete allas specified and as directed.(Drg No FD-223/ 224/ 283/ 284) 168 Table Centre complete allas specified and as directed(Drg No FD-274) 169 Table dressing Ladies with mirror complete allas specified and as directed(Drg NoFD-251/ FD/MAP-II/07) 170 Table Writing complete all as specified and as directed (Drg No FD - 275) 171 Chair Dining FD & MAP (ORs) complete allas specified and as directed (Drg No FD - 279 / FD/MAP-II/04) 172 Side Board complete allas specified and as directed(Drg No FD-241) 173 Sofa Set 05 seater with cushion complete allas specified and as directed (Drg No :FD-281) 174 Chair Dining Offrs (MAP) complete allas specified and as directed (Drg NoFD/E6/MAP/04) 175 Bed Ply Top complete all as specified and as directed(Drg No FD-246 & 247) 176 Bin Linen Multipurpose complete all as specified and as directed(Drg NoFD/E6/MAP/09) 177 Hat Stand with Mirror complete allas specified and as directed (Drg No FD-362) 178 Teapoy complete all as specified and as directed(Drg No FD-278) 179 Chair Dining, FD - 279 / FD/MAP-II/04 complete all as specified and as directed (Drg No FD-17(M)/201/ 229/ 281) 180 PAINTING :-M&L for removing existing paint by application of paint remover / grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint (Dual tone) in such a manner that body of Almirah/Locker shall be in one colour & door shutter shall be another colour. Make/colour/ shade as approved byGE/Engr-in-charge by spray painting after denting and filling with putty and preparation of surface thoroughlyto the following steel furniture items (internally & externally complete)as specified and as directed by Engr-in-Charge/GE. 181 Almirah large steel (Drg No : FD-1031) 182 All as per Srl item No 32.00 here-in-before but Almirah large steel 1/2H,1/2S (Drg No: FD/E6/MAP/18) complete all as specified and as directed by Engr-in-Charge/GE. 183 All as per Srl item No 32.00 here-in-before but Almirah medium steel(Drg No :- FD-1032) 184 All as per Srl item No 32.00 here-in-before but Bed hard steel (MAP) (Drg No: FD/E6/ MAP/ 18(R) complete all as specified and as directed. 185 All as per Srl item No 32.00 here-in-before butCharpoy IP folding with hard top (Drg No : FD-388(R) complete all as specified and as directed. 186 All as per Srl item No 32.00 here-in-before butCharpoy IP Hard Top (MAP)(Drg No : (FD/MAP/II/01) complete all as specified and as directed. 187 All as per Srl item No 32.00 here-in-before but Chair Writing (MAP)(Drg No : (FD/E6/MAP/12) complete all as specified and as directed. 188 All as per Srl item No 32.00 here-in-before butLadder for loft (steel) Drg No : (FD-238) complete all as specified and as directed. 189 All as per Srl item No 32.00 here-in-before but Rack shoe steel (Drg No: (FD/E6/MAP/02(R) complete all as specified and as directed. 190 All as per Srl item No 32.00 here-in-before but Teapoy Verandah (Drg No : (FD-255) complete all as specified and as directed. 191 All as per Srl item No 32.00 here-in-before but Teapoy Verandah (MAP) (Drg No: (FD/E6/MAP/17) complete all as specified and as directed. 192 All as per Srl item No 32.00 here-in-before but Chair School with Hand Board (Drg No: (FD/E6/MAP/05) complete all as specified and as directed. 193 All as per Srl item No 32.00 here-in-before but Table Bedside (Steel)(Drg No : (FD/E6/MAP/15(R)complete all as specified and as directed. 194 All as per Srl item No 32.00 here-in-before but Table Office Officers Steel(Drg No: FD-1003) complete all as specified and as directed. 195 All as per Srl item No 32.00 here-in-before but Table Office Clerk Steel (Drg No : FD-1004) complete all as specified and as directed. 196 All as per Srl item No 32.00 here-in-before butLocker Bed Side Steel(Drg No: FD-257) complete all as specified and as directed.
