Tender For Comprehensive Repair To Boundary Wall Compound Wall Under Aor Of Age Br Dett B Of Ge 862 Ews; 1 Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillers etc complete all as specified and directed. 2 M & L for Brick work with sub-class `B bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6complete all as specified and directed. 3 All as per Item No 2.00 here-in-before but except bricks.Note: Old bricks retrieved from Item No 1.00 above shall be reused. 4 M & L for providing plain cementconcrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required, complete all as specified and directed. 5 Demolition of RCC of any description and in any position not therwise specifically provided for, complete all as specified and directed. 6 Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m indepth; for foundation, etc. or for shafts, wells, cesspits, anholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed. 7 Demolition of cement concrete of any description and in ground floor/under the floors and paving complete all as specified and directed. 8 M&L for plain cement convrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in fondation, filling and mass concrete, complete all as specified and directed. 9 M & L for providing reinforced cement concrete RCC M-25 Design Mix (using 20 mm graded stone aggregate) as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like, complete all as specified and directed. 10 M & L for providing reinforced cement concrete RCC M-25 Design Mix (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed. 11 M & L for providing reinforced cement concrete RCC M-25 Design Mix (using 20 mm graded stone aggregate)as in Columns, pillars, piers, posts and struts complete all as specified and directed. 12 Returning & filling of the excavated earth including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils, complete all as specified and directed. 13 Removing excavated soils not exc 50 mand depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and directed. 14 Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete, complete all as specified and directed. 15 Formwork to sides ofsquare, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished surfaces of conrete flat complete all as specified and directed. 16 Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of conrete flatcomplete all as specified and directed. 17 M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. 18 All as per Item No 17.00 here-in-before, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.. 19 S & F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia with 2mm barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, complete all as specified and directed (each line wire to be measured). 20 S & F in repair concertina coil 1050mm dia, 56 loop, 2.5mm core wire heavy galvanished (wire-275 GSM & strip-200 GSM), tensile strengthof wire 1400-1500 N/Sqmm, wight 14.63 Kg/coil, stretchable length 12M including securing or tying at crossings with and provision of galvanised mild steel wire, staples ot steel pins etc, complete all as specified and directed. 21 Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. 22 Dismantling of post or struts (wood, steel or RCC) any section any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed. 23 Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/ loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm watering and removing surplus soil to a distance n exc 50 m and making good surface, complete all as specified and directed. 24 S & F angle iron posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling,boltingor riveting, etc, and grills and grating and for iron frame works similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. 25 M & Lfor preparation of new steel surfaces of any dedcription over 10 cm in with or girth,not otherwise describe and applying two coats of synthetic enamel paints over a coat of red oxide primer, complete all as specified and directed. 26 S & F for galvanised iron chain link fencing with 3.8mm to 4mm dia wire mesh size 100mm X 100mm (as per sample approved by GE) complete after dismantling of old unserviceable chainlink fencing of any type, complete all as specified and directed. 27 Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. 28 M & L for rendering 15mm thick in cement mortar 1:4 on stone walls or other than fair faces of brick walls fiinished even and smooth without using extra cement, complete all as specified and directed. 29 M & L for rendering 20mm thick in cement mortar 1:4 on stonesurfaces finished even and smooth without using extra cement, complete all as specified and directed. 30 M & L for preparation of new plastered wall surface including cornices etc and applying two coats of exterior emulsion all weather proof paint of Apex Ultima of ASIAN or equivelent make of any approved two or more colour pattern as approved by GE over and including a coat of primer, complete all as specified and directed. 31 M & L complete removal of existingtreatment of wall surfaces,preparation ofplastered or unplastered or untreated wall surfacesincluding cornices etc and applying two coats of exterior emulsion all weather proof paint of Apex Ultima of ASIAN or equivelent make of any approved two or more colour pattern as approved by GE over and including a coat of primer all as directed and as approved. 32 M & L precast RCC 1:2:4 type B1 as in landings, cover slab,chajjas etc.and similar articles with plain faces set in CM 1:6, complete all as specified and directed. 33 S & F of 2mm thick fibre reinforced polymer sheet having tensile strenght of 550 Mpa as in roof or wall cladding or view cutter of approved colourfixed with self tapping screws including dismantling of old sheet, complete all as specified and directed.
