Construction Of Warehouse 1080 Mt And Processing Shed 128 Sq Mt- 1 Civil work 2 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum,including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means 3 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading asdirected, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift upto 1.50 m) By Manual Means 4 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means 5 Excavation for foundation in Hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps with in a distance of 50 metres from the building area including dewatering and backfilling with available earth/ murum,watering, ramming, etc.complete. (Liftupto 1.5m) By Mechanical Means 6 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete 7 Filling in plinth and floors with available material approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 8 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cmincluding watering and compaction etc. complete 9 Providing and laying Cast in situ/Ready Mix cement concrete1:4:8in M-10 oftrap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 10 ProvidingandlayinginsitucementconcreteM20withtremix treatment for 100mm thickness for flooring with groovecutting of 4 mm wide and 20 mm deep with necessaryre filling with bitumen etc. complete. 11 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement andstructural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 12 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI 13 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal forR.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grad 14 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 15 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etcComplete. 16 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 17 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complet 18 Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positionsincluding scaffolding and curing etc. complete 19 Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25- 30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter- to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 600 mm girth (Surface Width). 20 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc.complete. 21 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35x35x5mm angle section fitted with sliding bolts and handles for bothsides ,deep M.S. channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fast arrangements, M.S.Bracketplate 300x300x3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc.complete.(I.S.62481979)(With mechanical gear) 22 Providing and applying plastic emulsion paint of approved quality,colour and shade to new surface in threecoatsincludingscaffolding,preparingthesurface. (excluding primer coat) etc. complete 23 Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparingthesurface.(excludingtheprimercoat)etc. complete. 24 Providing and fixing steel ventilator fully glazed partly fixed a sper detailed drawing without hot dipzinccoating including fabricating glazing with plain/obscured glass panes 5mm thick and approved type and quality and iron oxidized fixture sand fastening oil paint 2 coats etc. complete. 25 Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec.One Number: As directed by Engineer- in-charge 26 Providing sills and Door window frame of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neatcementslurry,curing,mouldingedges,polishing,cleaning complete. b) Granite 27 Turbo Ventilater 28 Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess withP.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc.complete. 29 Electrical Work 30 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 31 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm.copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 32 Making trench of suitable width and depth in soft soil for laying provided LT cable up to and including 3.5 core copper armoured 120 sq.mm complete as per specification no. CW-EXN-CTR 33 Supplying & erecting mains PVC unarmoured cable 1100Volt grade ISI mark 3 core / 2.5 sqmm stranded / solid copper complete erected on wall with duly painted G. I. Saddle @ 0.25 m C/C & rigidly grouted in the wall with the help of plated screws. 34 Supplying & erecting weatherproof powder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C. B. with industrial two pin plug socket 10 A and 3 pin plug top 10 A with top cover necessary connection etc complete with approved make 35 Point wiring for light/bell/exhaust fan in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire,modular type switch, earthing and required accessories as per 36 Providing point wiring for street light with PVC unarmoured cable 1100Volt grade ISI mark 3 core 1.5 sqmm stranded / solid copper erected on wall with G. I. Saddle duly painted @ 0,25 m C/C rigidly grouted in the wall with the help of plated screw including 4” x 4” M. S. box 2 way with epoxy painting & inside 10 amp Nylon connector strip for street light connection and flexible cable of 2 mtrs. for street light 37 Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base. 38 Supplying and erecting integrated LED street light fitting 40 to 50 W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 39 Supplying and erecting street light Wall bracket made from 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB 40 Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no.EA-EP 41 Supplying, erecting & marking DPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no.SW-SWR/MCB 42 Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending,drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. 43 Supplying and erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted suitable for SPMCB of 12 ways on iron / GI frame (horizontal busbar type) as per specification no.SW-SWR/MCBDB 44 Supplying & erecting G.I. pipe ‘A’ class 75 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE 45 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 46 Supplying & erecting Siemens type brass cable glands for 3 to 4 core 6 sq. mm. /2 to 4core 10 sq. mm. for XLPE armoured cable as per specification No. CB-GL 47 Supplying shockproof type hand lamp with lamp holder, bulb/ lamp 100 W guarded glass and 30 mtr. 3 core PVC flexible cord with hand shield type 3 pin 6 Amp. Plug top. 48 Point wiring for independent plug in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW 49 Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. 50 Supplying and erecting double pole metal clad switch with HC type fuse and neutral link 240V, 32A on iron / GI frame as per specification no. SW-SWR/MDP 51 Road Work 52 Excavation for road way in softrock , including dressing section to the required grade, camber and side slope sand conveying the excavated materials with alll iftsup to alead of 50m. and spreading or stacking as directed 53 Watering and compacting of embankment formed of material sobtained from the road cutting within a lead of 50m,notless than 97% of standard Proct or density after laying them in layers of 20 cm. to 30 cm. with vibratory roller. 54 Providing earth work in embankment with approved material sobtained from other sources upto lead of 50m.including alllifts,laying in layers of 20cm.to30cm.thickness breakingc lods,dressing to the required lines, curves, grades & section,watering and compaction with vibratory roller withV-Satattachmentto achieve not less than97%of standard proctor density etc. complete ( Material obtained from Other sources) 55 Compacting the hard murum side width sincluding laying in layers on each side with vibratory roller including artificial watering etc. complete. 56 Cement Treated Crushed Rock or combination as per clause 403.2 and table 400.4 in Subbase /Base-- Providing, laying and spreading Material on aprepared sub grade ,adding the designed quantity of cement to the spread Material, mi xinginplacewithrotavator,grading with the motor grader and compacting with the road roller at OMC to achieve the desire duncon fined compressive strength and to form a layer of sub- base/base course. 57 Providing and constructing 75mm.thick Modified Penetration Macadam (MPM) road surface in cluding all materials ,preparing the existing road surface ,spreading 40mm.stone metal layers 100 % crus her broken metal with conical crusher plan Threating an dspraying the bitumen of specified grade @ 2 Kg/sq m, spreading 12 mm. size chips compacting with three wheel static roller having weight 8 to10 MT.to achieve the desired degree of co mpaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates) 58 Providing and laying of Type-B premix seal coat with HMP of appropriate crushed stone chipping 6.70mm size and penetration bitumen of specified grade@0.68Kg/ Sqm.,preparing existing road surface including mixing in suitable Batch Mix plant and rolling by static roller having weight 8to10MT.etc.complete.(VG-30 bulk bitumen rates are considered to arrive at rates) 59 Surface Dressing Providing and laying surface dress in gas wearing course in single coat using crushed stone aggregates of specified size on allayer of bituminous binder laid on prepared surface and rolling with 8-10 tonne smooth wheeled steel roller. --d)6mm nominal chipping size(bitumen7.50kg/10Sq.M--Bitumen of specified grade(VG-30 bulk bitumen rates are considered to arrive at rates) 60 Royalty 61 Other Minarels 62 Sand 63 Lab testing 64 Sand -Fineness Modulous,Silt And Clay Content 65 Cement Concrete M-20 Grademix design M-20 With all Tests on basic materials 66 Cement Concrete M-20 Grade- M-20 Concetet Cube Compressive Strength 67 TMT Steel-Tensile test, Yield Stress, Ultimate Tensile Test, % elongation Test, Bend Rebend Test , Wt per Rmt Test 68 Murrum- Plasticity Index, Field Density Of Compacted Layer , Proctor Test, 69 Aggregate/crush material-metal-WaterAbsorption,Specific garvity,Impact value,Crushing value 70 Bricks-Bricks-Water Absorption,Specificgarvity,Crushing value 71 Cement-Compressive Strength, Soundness, fineness, Standard consistency, Setting Time Initial And Final 72 Cement concrete M-10 grade-Compressive Strength 73 ESHS 74 ESHS Plan
