Tender For Renovation Of Type- Iii Residence Of Havlock Colony At Sarojani Naidu Marg, Lucknow - 12mm cement plaster in single coat in building finished even & smooth 1 cement: 4 coarse sand including all L/M, T&P etc including the Dismantling existing plaster, including disposal of refuse as directed by the Engineer-in-charge with in distance of 60m. 2 Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge 3 Class M-150 brick work in 1:6 cement coarse sand (of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 4 12mm cement plaster in single coat in building finished even & smooth 1 cement: 6 coarse sand including all L/M, T & P etc as directed by the Engineer-in-charge. 5 Centering and Shuttering for RCC work including rent of shuttering, material.labour and T&P required for proper complition of work for slab and wall etc. 6 Reinforcement work with Bending, binding, cutting and placing in position including cost of reinforcement, binding wire with all cost of labour, material and required T&P etc. complete. 7 Providing & laying plain cement concrete 1:1.5:3 with cement, coarse sand & 20 mm gauge stone grit including all materail, labour & T&P etc. 8 Scraping old white or colour wash including disposal of refuse as directed by Engineer-in-charge with in a distance of 60m. 9 Providing and applying white cement based putty of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 10 One priming coat & one coat oil distemper on new work including supply of all materials, labour and T & P etc required for proper completion of the work. 11 Finishing walls with Premium acrylic smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ applied @1.67 Ltr/10 sqm) over existing cement paint surface (apex Ultima, weather coat all guard) 12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area beyond 3 sq. metres 13 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 14 Providing and fixing ISI marked flush door shutters conforming to IS 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 15 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Second class teak wood. 16 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 17 Providing and fixing ISI marked oxidised M.S. Sliding door bolt with nuts and screws etc. Complete. For size 250x16mm 18 Providing and fixing ISI marked oxidised M.S. tower bolt black finish (Barrel type) with necessary screws etc. Complete. For size 250x10mm 19 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc, complete. 20 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. Complete. 21 Providing and fixing aluminium extruded section body tubblar type universal hydraulic door closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 36kg to 80 kg and door with from 701 mm to 1000 mm)., with double speed adjustment with necessary accessories and screws etc., complete. 22 Fly proof Stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide apreture with matching wood beading. 23 Providing and fixing Aluminium curtain rod 20 mm dia. 24 Providing and fixing Curtain rod bracket for 20 mm dia. 25 Painting or varnishing on iron work in small areas or new wood work with one coat of ready mixed paint & two coat of approved superior quality ready mixed paint of clear synthetic vamish including supply of all materials, labour and T&P etc required for proper completion of work. 26 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours, shads except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm Including pointing the joints with white cement and matching pigment etc., complete. 27 Providing and fising 1 qualiity ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, botile green, black or any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cment mortar 1:3 (1 cement 3 coarse sand) and jointing with grey cment slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 28 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick Cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete, size of tile 600x600mm 29 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skarting, riser of steps over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry@ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600mm 30 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kichen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) joints trated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc, complete at all levels. Granite of any colour and shade, area of slab over 0.5 sqm 31 Providing & laying plain cement concrete 1:4:8 with cement, coarse sand & 20 to 40 mm gauge stone ballast including all materail, labour & T&P etc. 32 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cemnt slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 mm thick (1 cement: 4 Coarse sand): 25 mm thick. 33 Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.l. Brackets and stainless stell plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 178 mm 34 Providing and fixing wash basin with Cl brackets, 15 mm CP brass pillar taps, 32 mm cp brass waste of standard paattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size 630x450 mm with a pair of 15 mm CP brass pillar taps 35 Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length 15 mm nominal bore. 36 Providing and fixing PVC waste pipe for sink or wash basin including PVC wast fittings complete Semi Rigid Pipe 32 mm dia/40 mm dia. 37 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(a) 15mm nominal bore. 38 Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931(a) 15mm nominal bore. 39 Providing and fixing C.P. Brass Towel Rail 820x20 mm together with pair of C.P. brass brackets to fit the towel rail. 40 Providing and Fixing C.P. Soap dish Jaguar, ESSCO, Cera, Hindware. 41 Providing and fixing PTMT grating of approved quality and colour 125 mm nominal dia with 25 mm waste hole 42 Providing & fixing C.P. brass Shower Rose with 15 or 20 mm inlet 100 mm diametert 43 Providing and fixing 600x450 mm beveled edge mirror of supperior glas (of approved qualtiy) complete with 6 mm thick hard board ground gixed to wooden cleats with C.P. brass screws and washers complete. 44 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 45 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 liter low level flushing cistem with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal dising complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: white vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. 46 Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-Charge. 47 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (Handle lever) of conforming to IS 7231 with all fittings and fixtures complete. 10 litre capacity-white 48 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pips & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same incuding testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia pipes 49 P/F concealed G.I. Pipes class B complete with fitting & clamps, including cutting and making good the surface of walls etc. complete. (Internal works) 15 mm dia 50 P/F concealed G.I. Pipes class B complete with fitting & clamps, including cutting and making good the surface of walls etc. complete. (Internal works) 25 mm dia 51 Providing and fixing soil, waste and vent pipes. Sand cast iron S&S pipe as per IS: 1729.100 mm dia 52 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement 1 fine sand) including testing of joints etc. complete. 150 mm diameter. 53 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 Ltrs 54 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes jaining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing It there after The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge. 55 Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under: Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D5147. The laying of membrane shall be got done. through the authorised applicator of the manufacturer of membrane: 56 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works including applying priming coat of approved steel primer, M.S. tubes 57 Constructing masonry Chamber 60x45x50 cm, inside in brick work in cement mortar 1:4 (1) cement 4 coarse sand) for fire hydrants, with C.l. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common bumt clay F.P.S. (non modular) bricks of class designation 7.5 58 ElectricalWiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable etc, as required. 59 Wiring for light/power plug with 2x4 Sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class conduit alongwith 1 No. 4 Sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 60 Wiring for circuit/submain wiring alongwith earth wire with 2x6 Sq mm + 1x6 Sq.mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 61 Supplying and fixing of 25mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 62 Supply and fixing following 3 module(100mmx75mm), GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 63 Supply and fixing following 4 module(125mmx75mm), GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 64 Supply and fixing following 6 module(125mmx75mm), Gl box alongwith modular base & cover plate for modular switches in recess etc. as required. 65 Supply and fixing following 12 module(125mmx75mm), Gl box alongwith modular base & cover plate for modular switches in recess etc, as required. 66 Supplying & Fixing 3 Pin, 5 Amp. Ceiling Rose on the existing junction box/Wooden block including connections etc. as required. 67 Supplying and fixing 6 way, double door, single pole and neutral, sheet steel, MCCB distribution board, 240V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as required. (But without MCB/RCCB/Isolator). 68 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. 69 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 KA, C curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. 70 Supplying and fixing following rating, 63A double pole, 240 V, isolator in the exisitng MCB DB Complete with connections, testing and commissioning etc. as required.
