Tender For Ward No. 47, Located In Front Of Company Bagh. Road Cross Hospital In Saharanpur Palace Construction Work For Operation. - Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceablematerial within 50 metres lead as per direction of Engineer-in-charge.In Cement Mortar 2 Dismantling steel work in built up sections in angles, tees, flats and channels including allgusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. 3 Removing and dismantling of old doors, windows andclerestory windows openings (steel or wooden including its wiremesh, glaed & panelled shuttersalongwithwith itschowkhats, architrave, holdfasts, harware etc. complete)and stacking the usable grills, woodenpieces at appropriate place. The quoted rates shall include the cost ofscaffolding , requisite tools & tackles for carrying these operations, protective nets for safety and disposal of debris/rubbish at the approved dumping locationsfor all lead & lift etc. all complete as directed by site incharge/ banks engineer.The mortice lock of Main wire-mesh door, MS grills shall be kept properly of fixing it again for re-use as directed. The MS grill &other items are to be kept in safe custody of contractor as directed 4 Providing and doing the full brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes including cost of scaffolding etc. in :Cement mortar 1:6 (1 cement : 6 coarse sand) 5 Providing and fixing factory made ofthree track WhiteUN-PLASTICIZED Poly Vinyl Chloride (uPVC) sliding Door/Windowof approved make/brand for fixed and sliding glazed/wire-meshed panels comprising of uPVC two/ threebox multi-chambered frame, sash and mullion (wheerver required) of extruded profiles duly reinforced with at least 1.5 mmthick G.I. section of required length and size ( 35 mm x 10 mm/ 28 mm x 16 mm ), uPVC glazing bead, EPDM gasket, Espagnolettes locking ,G.I. fastener 100 x 10 mm size etc. for fixing frame to finished wall and necessarystainless steel screw, PVC 2 pipe & its cap as outlet for AC pipings etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion of appropriate size ( wherever required for wire-mesh shutter) shall be welded/ screwed including drilling of holes for fixing hardware and drainage of water etc.After fixing with weather proof PU Form silicon sealant over backer rod (wherever required) of required size and approved quality, all complete as per approved drawings & direction of Engineer-in-Charge and as per details in Techncial Bid and drawings.The other details/ items under this work are as under :a) Frame section size - 108 mm x 49 mm/ 109 mm x 52 mm with outer wall thickness of 2.2mm (+ 0.3mm)b) Sliding window Shutter section size -41 mm x 85 mm/42mm x 80 mm with wall thickness of2.2mm (1- 0.3mm)c) Interlock of size 41 mm x 48 mm / 45 mm x 29 mm fixed with screws overlapping each other when the sliding shutters on parallel tracks of frame are in closed position.d) uPVC glazing beading of 18.5 mm x 18 mm with C or R type and outer EDPM weather seal gaket e) 08 mm clear toughened glassf) SS-304 grade wire mesh of black/approved shade with appropriate beading. The wire-mesh shutter will have mullion memberin centre for better support to mesh wherever required.g) provision for fixing the MS/AI.grill on frame with security screws etc.The quoted rate shall include the cost relating to scaffolding, necessary tool & tackles , safety nets and work at all floor levels etc.Approved make for all uPVC doors/windows - Finesta / Kommerling/ Rehau / Lingel/ Winsta/ Okotech/ Prominanceor equivalent ,For glass- Modiguard/Asahi India/Saint Gobain/Atul or equivalent For Sealant - Dow Corrning/ Sikka/ Pidilite / Fosroc / CICO/ GE- Silicon or equivalent 6 Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight notless than 12.50 kg/sqm) 7 Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Well Seasoned Sat wood 8 Providing and fixing ISI marked soild core flus door and 35 mm thick minimum 03 nos in all work complete 9 providing, making and fixing wire guage mesh shutter using approved in all work complete 10 Providing and fixing approved make 5 mm thick plainfloat glass forventilators above door on the chowkhat with necessary screws etc. at all levels all complete in the quoted rate, the cost of providing and fixing of of designer moulding of size around 3/4 x 3/4 Shall be included which is to be fixed along the inner periphery of the opening for fixing the glass pane. The payment will be made on the basis of size of opening in which glass has been fixed. 11 Providing and fixing aluminium sliding door bolts, ISImarked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250 mm x 16 mm 12 Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete125 mm 13 Providing and fixing aluminiumtower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws200x10 mm 14 Providing and fixing aluminiumtower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws150 x 10 mm 15 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber 16 Providingand fixing the approved make/brand 1 mm thick selected laminate of approved colour , shade , pattern and glued with approved phenol formaldehyde based adhesive or approved equivalentoverlaying on substrate/flush door/plywithout any gap/air bubbles pressed uniformlyto line level and plumb, item complete with all edge lipping with water based PU TW lipping mounted flush to surface as per detailed drawings and as directed by Architects /bank engineer with all accessories, fixing implements , men material and all lift & lead complete with all necessary masking with avg. min. 10mm wide masking tape before applying polish/paint to edge lipping and getting mock up approved by Enginner in charge/ Architect. Item to include protecting finished item by avg. 20 microns thk polythene sheet till handover of facility etc. all complete as directed.Approved make - Greenlam/ Formica/ Sunmica/Merino/KitIam/Century/Virgo / Archidply or equivalent 17 Providing and applying grit finish plaster work matching with existing exterior of block/building having thickness from12 mm to 19 mm with acement plaster of mix : 1:6 (1 cement: 6 fine sand) & chips with necessary scaffolding , tool & tackles etc. at all levels including the removing/dismantling the damaged plaster & its disposal at the designated place all complete as directed. The work of edge making ( along jamb, soffit, corners, sill etc.)etc. shall be part of this item.The area above 0.1 Sq M will be taken in measurement. 18 Providing and applying one coat of approvedbrand/make water thinnable cement primer of approved brand and manufacture on wall surface including scaffolding, all tool & tackles etc. all completeat all levels as directed. Approved brand/make for paint work - Asian/ Nerolac/Berger/ ICI Dulux or equivalent 19 Providing and applying white cement based putty ofaverage thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 20 Providing and applying the two or more coats ofapproved brand/make premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre on wall & ceiling etc.as well asincluding applying additional coats wherever required to achieve even shade and colour through roller brush etc. all complete at all levels as directed. 21 Supplying and applying one priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) with all alled work etc. all complete as directed. For painting of chowkhat frames of door etc., the co-eff. of CPWD specifications will be used and flush door area will be deducted. 22 Providing and applying two or more coats of paintingwith synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on wood work or MS work with all necessary allied activites etc. at all levels complete as directed. 23 Providing and fixing in position collapsible steel shutterswith vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 24 Providing and laying water proofing treatment on roofsof slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green.Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm andcoarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. Forthe purppose of measurement the entire treated surface will be measured. 25 Providing and fixing wash basin with C.I. brackets, 15mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CPBrass single hole basin mixer 26 Providing and fixing wash basin with C.I. brackets, 15mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. 27 P/F PVC waste pipe in all work complete 28 P/F mirror of superior glass in all work complete 29 Providing and fixing toilet pipe holder in all work complete 30 Providing and fixing 8 mm dia C.P. / S.S. Jet withflexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 31 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931a) 15 mm nominal bore 32 Providing and fixing single lever of approved brand: single lever exposed parts kit of hi-flow 3- waydivertor consisting of operating lever, wall flange (with seals) & button. 33 Providing and fixing SS soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealedfitting arrangements, weighing not less than 106 gms. 34 Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78mm and effective height of 88 mm, weighing not less than 190gms. 35 Providing and fixing Rain flow overhead shower with shower arm 150mm 36 P/F in position PVC flexible tube connection of approved make (to the approval of Engineer-in- Charge) Complete in all respect.a) PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut . 37 Providing and fixing SSlong body bib cock ofapproved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore : ESSCO CAT NO- 101107 38 Providing and fixing SS shortbody bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore : ESSCO CAT NO- APR-101-037 39 Providing and fixing SS brass shower rose with 15 or 20 mm inlet : 150 mm diameter 40 Providing and fixing SS concealed stop cock 41 Providing and fixing one C.P. Extension pieace of 15mm x 25mm with one or two 15 mm SS Hex nipple with c.p. flange inclusiveall accessories etc. complete in all respect as directed by architect and engineer incharge 42 Providingand fixing complete set of wallmounting/hungenglish commode with cover, a single piece slim cocealed cistern body ( Grohe/ Jaguar) with its installation kit s-typedrain pipe connection setand fixing rimless wall hung wc with pp soft close seatcover, hinges, gun metal anchor screws accessoriesset like size 370x510x360mm control plate opal ( ROOM TOILETS) JAQUAR CISTERN CAT NO- JCS-WHT-2400, Wall Hung WC- ESSCO with SOft seat cover - ECS-WHT-955 SPP- , Control Plate opal - Jaguar - JCP-CHR-152415 , ,PARRYWAREincluding cutting of walls and making them good all complete 43 Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 mspacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls. Approved make- Flowguard/ Astral/ Ashrivad/ AKG/Supreme/ Finolex or equivalent20 mm nominal dia Pipes 44 25 mm nominal dia Pipes 45 Providing and fixing PVC Floor traps conforming to I.S.I.Specification of approved firm/make of the self cleaning designincluding cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and fIoors,etc. minimum depth of water should be 150mm with a minimum seal 50mm.Complete in all respects as directed. Approved make/brand of UPVC- Prince/ Supreme/ Finolex / Ashirvad or equivalent ,110 x 90 mm with deep seal 46 Providing and laying point wiring forlight point/fanpoint/exhaust fan point/ call bell point (excluding switchsocket connectivity etc.) with 1.5 sq. mm FRLS ( flame retardant low smoke)PVC insulated copper conductor single core cable in surface/ recessed steel / PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cablewith requisite loop length at junction, switch board etc. as required including dismantling of oldand excluding two way switches. The neutral and earthing wire will be in loop from a particular switch board for point wiring. The interconnected wiring forswitch & socket, fan regulator etc. will not be included under point wiring . [ Group B as per CPWD]Approved make are Finolex/ RR Kabel/ Anchor/ Poly Cab or equivalentall complete as directed. 47 Providing and laying set of wires for circuit/loop wiring/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cablein surface/ recessed medium class PVC/ metal conduit enough length at junction and switch boards etc. as required all complete including dismantling/removing of old wires as directed including removing old one.Approved make - Finolex / Anchor/ Havell / RR Kabel/ Polycab or equivalent in specification. The interconnecting wiring for switch & socket is to be included in this item rate. For payment the linear length of pipe/conduit will bemeasured from the main DB to module box/switch board.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 48 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 49 Supplying, laying and fixing (with suitable clips , mortar etc.) of following sizes of medium class PVC conduit along with all required accessories ( like bend , junction box, cover, tee etc. ) in surface/recess including cutting the wall and making good the same in case of recessed conduit as required all complete as directed as well as dismantling/removing of old wherever required.The necessary connections withexisting iron pipes/fan hook/junction box etc. in ceiling has to be made. Also, the pipes have to be laid in floor, if required. Approved make - Finolex/ Ashirwad/ AKG/ Polyplast or equivalent. The payment will be made on the basis of length of pipe only.25mm 50 Supplyingandfixing following modular switch/socket on the existing modulur plate & switch boxincluding connections but excluding modulur plate etc as required.5/6 A switch 51 15/16 A switch 52 3 pin 5/6 A socket outlet 53 6 pin 15/16 A socket outlet 54 Supplying ,fixing, connecting with wire and testingthetwomodule stepped type electronic fan regulator on the existing modular plate switch boxbut excluding modular plate etc. as required all complete as directed and removing old. Approved make- Legrand (mylinc)/ L&T (Entice)/ Havells (Crab tree-Athena)/ Anchor-Roma or equivalent in specification 55 Supplying and fixing following size/ modules with GI boxas well as modular base/plate , cover plate & dummy cap for modular switches in surface/ recess etc. as required all complete as directed and removing old. Approved make MK (wraparound plus) / Siemens (Delta)/ Legrand (mylinc)/ L&T (Entice)/ Havells (Crab tree-Athena)/ Anchor-Roma or equivalent in specification1 or 2 Module (75 mmx75 mm) 56 3 Module ( 100 mm x 75 mm) 57 4 Module ( 125 mm x 75 mm) 58 6 Module ( 200 mm x 75 mm) 59 8 Module ( 125 mm x 125 mm) 60 12 Module ( 200 mm x 150 mm) 61 Providing and fixing the 6A Batten lamp Holder Fancy type240V (white colour) of approved make Anchor (MODEL NO. 39684)/ Bajaj/ Panasonic or equivalent all complete as directed and removing the old 62 Supply, Installation, Testing and Commissioning of1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 63 Supplying , installating, connecting with required wire,testing and commissioning ofexhaust fan to be done in bathroom & kitchen exhaust fanwith louvers on glazing of windows of approve make- Bajaj [Bahar Fresh 225 mm Air Fan (Mettalic Grey)] / Orient/ Havell/Crompton make or equivalentall complete on glass opening in the windows as directed.upto 450mm sweep 64 Providing and installing made ofbakellite/acrylicCeiling rose, 3 pin, 5 amps ISI marked and of BAJAJ/PHILIPS/WIPRO/ Anchor make or equivalent complete as directed. 65 Providing , connecting andinstallingLED Batten Tubelight20W of Jaquar Model no. LGLZ01X020XC/ Hazells/ Crompton/ Bajaj/Wipro/Panasonic or equivalent complete as directed and removing the old. 66 Supplying and fixing Single pole 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 67 Supplying & fixing following rating, doublepole, 240 V isolator in the existing MCB DB complete with connections testing and commissioning etc as required40 A 68 Other miscellaneous work 3% nd contingency 2% on total project 69 add 18% gst
