Tender For Supply And Installation Of Medical Equipment For Als & Bls Ambulances On Rate Contract Basis Syringe Pump 1. Must be user-friendly with simple menu driven operation. 2. Must have 12V DC operation and battery powered/AC mains ( 220-240V) RS232 serial link for remote monitoring and control of infusion. . Should have Color 3.2 or more inch TFT Color screen for distant viewing 3. Must have flow rate programmable from 0.1 to min. 1200 ml/hr. 4. Should accept standard disposable syringe ( 2- 60ml) 5. Automatic detection of syringe size and proper fixing. Must provide alarm for wrong loading of syringe. 6. Selectable occlusion pressure trigger level from 100mm hg to 1100mm hg to allow use over a range of applications. 7. Should have comprehensive alarm package including occlusion pressure, pre alarm and alarm, end of infusion alarm, low battery pre alarm and alarm, maintenance reminder alarm, near empty alarm, syringe disengaged alarm, etc. (with high sensitivity). 8. Battery backup o 6-8 hours or more when fully charged with provision to display residual battery life in hours and minutes. 9. History / memory for at least last few patients with alarm clock records. . Should be able to store up to 2000 Drug names. and should have Infusion Modes (ml/h, body weight, ramp, sequence, Micro, etc. 10. Comprehensive safety check, with dear alarm messages. 11. AC mains (100 - 240V) and battery powered RS 232 serial link for remote monitoring and control of Infusion. 12. Necessary reinforcement plates would be made available in the ambulance. Installation of the devices would be undertaken by the buyer under the supervision of the supplier’s representative. Should be US FDA / European CE (notified/BIS Certified)
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.