Tender For Laying Of Water Line In Pocket A And B At Madhuban Bapudham Scheme - Earth work in excavation into the trenches for water line in ordinary soil as clay, lome and sand including also reflling of the trenches all complete of the work. SI. No. 251 (a)/2022 including specials etc 2 Supplying, Carting, laying and Jointing PN-6 grade PE-100 IS 4984 : 2016 of following dia H.D.P.E Pipe all complete of the work. Approved rate(i) 110 mm dia (I.D) HDPE Pipe 3 Supplying, Carting, laying and Jointing PN-6 grade PE-100 IS 4984 : 2016 of following dia H.D.P.E Pipe all complete of the work. Approved rate(ii) 160 mm dia (I.D) HDPE Pipe 4 Supplying, Carting, laying and Jointing PN-6 grade PE-100 IS 4984 : 2016 of following dia H.D.P.E Pipe all complete of the work. Approved rate(iii) 200 mm dia (I.D) HDPE Pipe 5 Supplying, Carting, laying and Jointing of following dia K-7 Pipe all complete of the work (AIR) (i) 250 mm dia K-7 Pipe 18.72.4 DSR 2023 2880.70 x 0.735 x111/107 6 (ii) 300 mm dia K-7 Pipe 18.72.5 DSR 20233518.25 x 0.735 x111/107 7 (iii) 350 mm dia K-7 Pipe 18.72.6 DSR 20234186.50 x 0.735 x111/107 8 (iv) 400 mm dia K-7 Pipe 18.72.7 DSR 20235084.55 x 0.735 x111/107 9 Supplying, laying and Jointing of 20 mm dia CPVC Pipe DSR 2023- 18.9.2 274.30 x 0.735 x111/107 10 Making connection from HDPE 100 mm to 200 mm distribution branch with CPVC pipe of 20 mm dia including nipple and bracket all fittings extra DSR 2023- 18.13.1 911.90 x 0.735 x111/107 11 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : DSR 2021 18.59.2 @6993.60 x 0.735 x111/107 12 Providing and fixing C.I. sluice valves of following dia (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :100 mm dia SV DSR 2023 18.31.1.1 (4791.20 x 0.735 x111/107) 13 Providing and fixing C.I. sluice valves of following dia (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :150 mm dia SV DSR 2023 18.31.3.1 (6966.55 x 0.735 x111/107) 14 Providing and fixing C.I. sluice valves of following dia (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :200 mm dia SV DSR 2023 18.31.4.1 (13554.70 x 0.735 x111/107) 15 Providing and fixing C.I. sluice valves of following dia (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :250 mm dia SVDSR 2023 18.31.5.1 (19566.55 x 0.735 x111/107) 16 Providing and fixing C.I. sluice valves of following dia (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :300 mm dia SV DSR 2023 18.31.6.1(27059.30 x 0.735 x111/107) 17 Providing and fixing C.I. sluice valves of following dia (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :350 mm dia SV DSR 2023 18.31.6.1 (27059.30 x 0.735 x111/107) 18 Providing and fixing C.I. sluice valves of following dia (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :400 mm dia SV DSR 2023 18.31.6.1 (27059.30 x 0.735 x111/107) 19 Constructing masonry Chamber 60x60x1.0 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( ide) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard designation 7.5 : 18.33.1 With common burnt clay F.P.S.(non modular) bricks of5 DSR 2023(10862.40 x 0.735 x111/107) 20 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessa ry excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 DSR 2023 18.34.1 @ (18896.70 x 0.735 x111/107) 21 Supply and fixing of 80 mm dia piller type fire hydrentDSR 2023 18.31.1.1 - (4791.20 x 0.735 x111/107) 22 Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class): DSR 2023 18.25.1(6352.40 x 0.735 x111/107) 23 Cement Concrete with 1 : 2 : 4 cement, C-sand and 20 mm nominal size stone grit including supply of all material, labour, T&P etc as required for proper complition of the work SI No. 279 a SOR 2022 24 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : (300 mm to 400 mm dia) DSR 2023(1785.35 x 0.735 x111/107) 25 Supply and fixing of following dia C.I.D All complete the work (DSR) 2023100 mm dia C.I.D Joint18.30.2 -(332.00 x 0.735 x111/107) 26 Supply and fixing of following dia C.I.D All complete the work (DSR) 2023150 mm dia C.I.D Joint18.30.4 -(387.40 x 0.735 x111/107) 27 Supply and fixing of following dia C.I.D All complete the work (DSR) 2023200 mm dia C.I.D Joint 18.30.5 -(428.65 x 0.735 x111/107) 28 Supply and fixing of following dia C.I.D All complete the work (DSR) 2023250 mm dia C.I.D Joint 18.30.6 -(596.65 x 0.735 x111/107) 29 Supply and fixing of following dia C.I.D All complete the work (DSR) 2023300 mm diaC.I.D joint 18.30.7 -(599.50 x 0.735 x111/107) 30 Supply and fixing of following dia C.I.D All complete the work (DSR) 2023350 mm diaC.I.D Joint 18.30.8 - (762.90 x 0.735 x111/107) 31 Supply and fixing of following dia C.I.D All complete the work (DSR) 2023350 mm diaC.I.D Joint 18.30.9 -(1066.80 x 0.735 x111/107) 32 Providing and fixing C.I. scoure valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : DSR 2023 - 18.31.1.1 -(4791.20 x 0.735 x111/107)
