Tender For 3. Repairs To Percolation Tank At Amondi Dudhane Odha Tal Ambegaon Dist Pune. - Cleaning grass and removal of rubbish up to a distance of 50 meters outside the periphery of the area as directed. 2 Dismantling stone masonry in cement mortor including stacking the material as directed with 15 m lead and 1.50 m lift etc complete 3 Excavation in all kinds of soil & Soft murum including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. complete with leads as below and all lifts as directed. 4 Excavation in hard murum including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drains/catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road /embankment including cost of all materials,machinery, labour, dressing bed and sides to required level and profile etc., complete with leads as below and all lifts as directed. 5 Excavation in soft rock without blasting including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road including cost of all materials, machinery, labour, dressing bed & sides to required level and profile etc.complete with leads as below and all lifts as directed. 6 Excavation in hard rock of all toughness by breaker including boulders above 0.6 m dia.(0.113Cum) minimizing damage to side slopes of excavationand placing the excavated rock neatly in approved dump area including cost of all materials, machinery, labour, leveling bed etc., complete with lead up to 15 m and all lifts as directed. 7 Drilling 32 mm diameter grout holes in concrete / rock by percussion drilling using jack hammer as directed to specified depth for consolidation / contact grouting including cost of all materials, machinery, labour, cleaning holes, ventilation, lightening, drainage and all other ancillary operations etc complete Consider 100 m drilling for analysis 8 Providing and layingTor steel reinforcement for RCC work such as slab, piercaps,gaurdstones etc. including cutting,hookinglaying in position etc. with all leads and lifts 9 Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss /quartzite / graded metal for PCC with or without surface reinforcement/ RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer with shuttering and scaffolding,placing, compacting, curing with an initial lead of 1km and all lifts etc. complete as directed. 10 Providing and fixing canal information board of 1.2x0.75 m prepared on 16 gauge M.S.sheet with angle iron frame of size 35x35x3 mm with cross bracing of size 25x25x3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border/letters/numeral /arrows coated with non-peal able crystal clear protective transparent coat retaining 100 % reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixingin ground with cement concrete in M-15 block of size 60x60x75 cm as directed. 11 Testing Charges for Fine Aggregate 12 Testing Charges for Coarse Aggregate 13 Testing Charges forcement 14 Testing Charges forSteel 15 Testing Charges forConcrete
|