Framework Agreement For Supply Of Steel Plates And Sheets In Q3 Of Fy 2025-26 , Cr Coil 0.63X600 Is 513 Cr3 Dd Tdc:Rta:408:R04; 0.63 X 600 X Coil Form [T X W X L] [Mm] , Cr Coil 0.80X850 Is 513 Cr3 Dd Pos Tol Tdc:Rta:410:R00; 0.8 X 850 X Coil Form [T X W X L] [Mm] , Cr Coil 0.80X850 Is 513 Cr3 Dd Tdc:Rta:408:R04; 0.8 X 850 X Coil Form [T X W X L] [Mm] , Cr Coil 0.80X750 Is 513 Cr3 Dd Pos Tol Tdc:Rta:410:R00; 0.8 X 750 X Coil Form [T X W X L] [Mm] , Cr Coil 0.80X300 Is 513Cr3 Dd Pos Tol Tdc:Rta:410:R00; 0.8 X 300 X Coil Form [T X W X L] [Mm] , Cr Coil 0.80X300 Is 513 Cr3 Dd Tdc:Rta:408:R04; 0.8 X 300 X Coil Form [T X W X L] [Mm] , 1.6 Mm X 1250 Mm X 2500 Mm Crc Steel Sheets Annealed To Specification Aa 10115 Rev-09 (Is 513 Cr2 Kld); 1.6 X W=1250 X L=2500 [T X W X L] [Mm] , Hr Sheet 2 Mm Is 5986 Gr 205; 2 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Cr Sheet 2.0 Mm Is 513 Cr2 - Kld; 2 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Cr Sheet 2.0 Mm Is 513 Cr2 - Kld; 2 X 1250 X 2500 [T X W X L] [Mm] , Hr Sheet 2.5 Mm Is 5986 Gr 205; 2.5 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , 3.0 Mm X 1250 Mm X 2500 Mm Crc Steel Sheets Annealed To Specification Aa 10115 Rev-09 (Is 513 Cr2 Kld); 3 X W=1250 X L=2500 [T X W X L] [Mm] , Hr Sheet 3.15 Mm Is 5986 Gr 205; 3.15 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 3.15 Mm Is 1079 Gr.Hr1 Sk/K; 3.15 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheet 4.0Mm Is 5986 Gr 205; 4 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Pl 5 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 5 X 1500 = W = 1800 X L = 6300 [T X W X L] [Mm] , Cq Pl 5 Mm Is 3502; 5 X 900 = W = 1250 X L = 6300 [T X W X L] [Mm] , Pl 5 Mm Is2062 E250 Gr Br/K Tdc:386; 5 (T) X 1500 = W = 1800 (W) X (6300-12000) (L) [Mm]; 5 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 6 X 1500 = W = 1800 X L = 6300 [T X W X L] [Mm] , Cq Pl 6 Mm Is 3502; 6 X 900 = W = 1250 X L = 6300 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr Br/K ; Tdc:301 ; 6 (T) X 1500 = W = 1800 (W) X (6300-12000) (L) [Mm]; 6 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 6 (T) X 2000 (W) X (6300-12000) (L) Mm; 6 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 8 Mm Is 2062 E 250 Gr A/Br/Sk/K Tdc:301 Rev 12; 8 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 8 Mm Is2062 E350 Gr Br/K Tdc:301; 8 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 8 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 8 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 8 Mm Is 2062 E250br/K Tdc:6:386, Width 2000Mm, Length 12000Mm; 8 X 2000 X 12000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E350 Gr B0/K Tdc:386; 8 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 8 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 8 Mm Is 2062 E250br/K Tdc:6:386,; 8 X 2500 X 12000 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E 250 Gr A/Br/Sk/K Tdc:301 Rev 12; 10 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E250br/K Tdc 301 , Width 2000Mm, Length 12000 Mm; 10 X 2000 X 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc 301 + Ust As Per Astm A578 Level B, Width 3200 Mm, Length 8000 Mm; 10 X W = 3200 X L = 8000 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E 350 Gr Br/K Tdc 301 Rev 12; 10 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 10 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E 250 Gr Br/K Tdc:6:386 Rev 03; 10 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E250br/K Tdc:6:386, Width 2000Mm, Length 12000Mm; 10 X 2000 X 12000 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 10000Mm; 10 X 2500 X 10000 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E 350 Gr B0 Tdc:6:386 Rev 03; 10 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Plate 10Mm Is2062 E350b0 Tdc:6:386 Rev 03; 10 X 2500 X 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc:301; 10 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 10 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 10 (T) X 2000 (W) X (6300-12000) (L) Mm; 10 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Plt Bq 10 Mm (Sa516 Gr 70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403)+Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 10 X 2500 X (6300 = L = 10000); [T X W X L] [Mm]; 10 X 2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 12 Mm Is 2062 E 250 Gr A/Br/Sk/K Tdc:301 Rev 12; 12 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 12 Mm Is2062 E350 Gr Br/K Tdc:301; 12 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 12 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 12 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 12 Mm Is 2062 E 250 Gr Br/K Tdc:6:386 Rev 03; 12 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 12 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 12 X 2500 X 12000 [T X W X L] [Mm] , Pl 12 Mm Is 2062 E 350 Gr B0 Tdc:6:386 Rev 03; 12 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 12 (T) X 2000 (W) X (6300-12000) (L) Mm; 12 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 12Mm A516 Gr. 70; Tdc: Aa10403 Rev 01 + Supplementry Rquirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure- 1)+Bend Test (Sl. No. 5 Of Annexure-1) .; 12 X 3000 X 8000< L < 12000 [T X W X L] [Mm] , Pl 14 Mm Is2062 E250 Gr Br/K Tdc:301; 14 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 14 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Plt Bq 14 Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+ Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 14 X 2500 X (6300 = L = 7500) [T X W X L] [Mm]; 14 X 2500 X 6300 = L = 7500 [T X W X L] [Mm] , Pl 16 Mm Is2062 E350 Gr Br/K Tdc 301 Rev12 + Ust As Per Standard En 10160, Class S2/E2; 16 Mm (T) X 2500 Mm (W) X 6300 Mm (L); 16 X 2500 X 6300 [T X W X L] [Mm] , Pl 16 Mm Is2062 E350 Gr B0/K Tdc:301; 16 (T) X 2500 (W) X (6300-12000) (L); 16 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 16 Mm Is 2062 E 250 Gr Br/K Tdc:6:386 Rev 03; 16 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 16 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 16 X 2500 X 12000 [T X W X L] [Mm] , Pl 16 Mm Is 2062 E 350 Gr B0 Tdc:6:386 Rev 03; 16 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 16 (T) X 2500 (W) X (6300-12000) (L) Mm; 16 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 16 Mm Is 2062 E250 Gr Br_Tdc:6:386 Rev 03_ 16X 3400X (10000< L < 12000) ; L X B X H (Mm); 16 X 3400 X 10000 = L = 12000 [T X W X L] [Mm] , Pl 16 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 16 X 2500 X 5700 [T X W X L] [Mm]; 16 X 2500 X 5700 [T X W X L] [Mm] , Pl 16Mm A516 Gr. 70; Tdc: Aa10403 Rev 01 + Supplementry Rquirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1)+Bend Test (Sl. No. 5 Of Annexure-1) .; 16 X 3000 X 10000< L < 12000 [T X W X L] [Mm] , Pl 16 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 16 X 2500 X 6300 [T X W X L] [Mm] , Plt Bq 16 Mm (Sa516 Gr 70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 16 X 2000 X 10000 [T X W X L] [Mm; 16 X 2500 X 10000 [T X W X L] [Mm] , Pl 18 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 18 X 2500 X 6300 = L = 7500 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 20 X W= 2500 X 10000 = L = 12500 [T X W X L] [Mm] , Plate-20 Is2062 E250br Tdc:301 Rev 12; 20 X 2500 X 12650 [T X W X L] [Mm] , Pl 20 Mm Is 2062 E350br/K Tdc 301 Rev.12 With Supplementary Requirement: Charpy V-Notch Impact Test On Longitudinal & Transverse Specimen, Width 2500Mm, Length 12000Mm; 20 X 2500 X 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E350 Gr Br/K Tdc 301 Rev12 + Ust As Per Standard En 10160, Class S2/E2; 20 [T] X 2500 [W] X 6300 [L] Mm; 20 X 2500 X 6300 [T X W X L] [Mm] , Pl 20 Mm Is2062 E350 Gr B0/K Tdc:301; 20 (T) X 2500 (W) X (6300-12000) (L); 20 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 20 X 2000 = W = 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Plate 20.0 Mm Is2062 E250br; 20 X 2500 X 7325 [T X W X L] [Mm] Tdc:6:386 Rev 03 , Pl 20 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 20 X 2000 = W = 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 20 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 20 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 16 (T) X 2500 (W) X (6300-12000) (L) Mm; 20 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 20 X 2500 X 7100 [T X W X L] [Mm]; 20 X 2500 X 7100 [T X W X L] [Mm] , Pl 20 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 20 X 2500 X 6300 [T X W X L] [Mm] , Pl 25 Mm Is2062 E350 Gr Br/K Tdc:301; 25 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 25 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pi 25 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 25 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 25 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 25 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 25 (T) X 2500 (W) X (6300-12000) (L) Mm; 25 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl25 E250gr-Br/K Tdc:6:386; 25X3100x12000 ; T (Mm) X W (Mm) X L (Mm); 25 X 3100 X 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 25 X 3200 X 12800 [T X W X L] [Mm]; 25 X 3200 X 12800 [T X W X L] [Mm] , Pl 25 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 25 X 2500 X 6300 [T X W X L] [Mm] , Plt Bq 25 Mm (Sa516 Gr70) Tdc: Aa10403 +Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403)+ Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); 25 X 2500 X 13000 [T X W X L] [Mm]; 25 X 2500 X 13000 [T X W X L] [Mm] , Pi 28 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 28 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 28 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 28 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 28 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 28 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 30 Mm Is2062 E350 Gr Br/K Tdc 301 Rev12 + Ust As Per Standard En 10160, Class S2/E2, 30 T] X 2500 [W] X 6300 [L] Mm; 30 X 2500 X 6300 [T X W X L] [Mm] , Pi 30 Mm Is2062 E250 Gr Br Tdc:6:386 Rev 03; 30 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 30 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 4000 ; L= 6750;[Thickness, Length (L) & Width (W) Are In Mm]; 30 X 4000 X 6750 [T X W X L] [Mm] , Plate 30 Mm ; Sa515 Gr.70; Tdc: Aa10404-05 + Supplementary Requirements: Ut (S12); 30 X 2500 X 8000 = L = 10000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 32 X W= 2500 X 10000 = L = 12500 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 32 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pi 32 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 32 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 32 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pi 32 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 32 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 32 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 32 X 2500 X L= 6300 [T X W X L] [Mm] , Pl32 E250gr-Br/K Tdc:6:386; 32X3200x6500 ; T (Mm) X W (Mm) X L (Mm); 32 X 3200 X 6500 [T X W X L] [Mm] , Pl32 E250gr-Br/K Tdc:6:386; 32X2650x11100 ; T (Mm) X W (Mm) X L (Mm); 32 X 2650 X 11100 [T X W X L] [Mm] , Pl32 E250gr-Br/K Tdc:6:386; 32X2550x10000; T (Mm) X W (Mm) X L (Mm); 32 X 2550 X 10000 [T X W X L] [Mm] , Plate 35 Mm ; Sa515 Gr.70; Tdc: Aa10404-05 + Supplementary Requirements: Ut (S12); 35 X 2500 X 8000 = L = 10000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 36 X W= 2500 X 10000 = L = 12500 [T X W X L] [Mm] , Pi 36 Mm Is2062 E350 Gr Br/K Tdc 301 Rev 12; 36 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E350 Gr Br/K Tdc 301 Rev12 + Ust As Per Standard En 10160, Class S2/E2; 36 [T] X 2500 [W] X 6300 [L] Mm; 36 X 2500 X 6300 [T X W X L] [Mm] , Pl 36 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 36 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 36 X 4500 X 8500 [T X W X L] [Mm] , Pl 36 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 36 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl36 E250gr-Br/K Tdc:6:386; 36X3200x11000 ; T (Mm) X W (Mm) X L (Mm); 36 X 3200 X 11000 [T X W X L] [Mm] , Pl 36 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 36 X 2500 X 6300 [T X W X L] [Mm] , Pi 40 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 40 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 40 X W= 3800 X L= 5700 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 40 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 40 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 40 X 2500 X 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 40 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl40 E250gr-Br/K Tdc:6:386; 40X3200x11000 ; T (Mm) X W (Mm) X L (Mm); 40 X 3200 X 11000 [T X W X L] [Mm] , Pl 40 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2500 ; L= 8000-10000 ;[Thickness, Length (L) & Width (W) Are In Mm]; 40 X 2500 X 8000 = L = 10000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 45 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E250 Gr Br.K Tdc 301 Rev 12;45 X 2500 X 6300-12000; ( T X W X L) Mm; 45 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pi 45 Mm Is2062 E350 Gr Br/K Tdc 301 Rev 12; 45 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 45 Mm Is 2062 E350b0 Tdc:6:386, Width 2000 - 2500 Mm, Length 8000- 12000 Mm; 45 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 50 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 50 X W= 2500 X 10000 = L = 12500 [T X W X L] [Mm] , Pi 50 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 50 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 50 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 50 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 50 X 2500 X 12000 [T X W X L] [Mm] , Pi 50 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 50 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 50 X W= 2500 X L= 12000 [T X W X L] [Mm] , Pl 55 Mm Is2062 E350 Gr.B0 Tdc 386; 55 X 2500 X 12000 [T X W X L] [Mm] , Pl 56 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 56 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pi 56 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 56 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pi 60 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 60 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 63 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E350 Gr Br/K Tdc 301 Rev12 + Ust As Per Standard En 10160, Class S2/E2, 63 [T] X 2500 [W] X 6300 [L] Mm; 63 X 2500 X 6300 [T X W X L] [Mm] , Pl 63 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 63 X W= 2000 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 63 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 63 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 63 X 2500 X 12000 [T X W X L] [Mm] , Pi 63 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 63 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 63 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 3600 ; L= 7800;[Thickness, Length (L) & Width (W) Are In Mm]; 63 X 3600 X 7800 [T X W X L] [Mm] , Pl 70 Mm Is 2062 E 250 Gr A/Br/Sk/K; 70 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] Tdc:301 Rev 12 , Pl 70 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12 + Ust As Per Astm A435; 70 X 2800 X 5600 [T X W X L] [Mm]; 70 X 2800 X 5600 [T X W X L] [Mm] , Pi 80 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 80 X W= 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 80 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 80 X 2850 X 10700 [T X W X L] [Mm]; 80 X 2850 X 10700 [T X W X L] [Mm] , Plate 80 Mm ; Sa515 Gr.70;Tdc: Aa10404-05 + Supplementary Requirements: Ut (S12); 80 X 2500 X 8000 = L = 10000 [T X W X L] [Mm] , Pl 80 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 80 X 2500 X 6300 [T X W X L] [Mm] , Pl 90 Mm Is 2062 E 250 Gr A/Br/Sk/K; 90 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] Tdc:301 Rev 12 , Pl 90 Mm Is2062 E350 Gr Br/K (Impact Test Applicable At Room Temperature) Tdc:301 Rev.12 + Ultrasonic Testing As Per En 10160, Class S2/E2; 90 [T] X 2500 [W] X 5000 [L] Mm; 90 X 2500 X 5000 [T X W X L] [Mm] , Plate 90 Mm ; Sa515 Gr.70; Tdc: Aa10404-05 + Supplementary Requirements: Ut (S12); 90 X 2500 X 8000 = L = 10000 [T X W X L] [Mm] , Plt Bq 90Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 90 X 2500 X (6300 = L = 7000) [T X W X L] [Mm]; 90 X 2500 X 6300 = L = 7000 [T X W X L] [Mm] , Pl 100 Mm Is2062 E250 Gr Br/K; Tdc:301 Rev.12 + Ultrasonic Testing As Per En 10160, Class S2/E2; 100 [T] X 2500 [W] X 5000 [L] Mm; 100 X 2500 X 5000 [T X W X L] [Mm] , Pl 100 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 100 X 2500 X 6000 [T X W X L] [Mm]; 100 X 2500 X 6000 [T X W X L] [Mm] , Pl 100 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2200 ; L= 4800;[Thickness, Length (L) & Width (W) Are In Mm]; 100 X 2200 X 4800 [T X W X L] [Mm] , Pl 110 Mm Is 2062 E 250 Gr A/Br/Sk/K; 110 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 110 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 Of Annexure-1); 110 X 2000= W =2500 X 6000 = L = 8000 [T X W X L] [Mm] , Pl 110 Mm Sa515 Grade-70 Aa10404-05 + Supplementary Requirements: Impact Test At Room Temperature+Orientation Of The Test Specimen In Longitudinal Direction(S5); 110 X 1800= W = 2500 X 5000= L = 8000 [T X W X L] [Mm] , Pl 120 Mm Sa515 Grade-70 Aa10404-05 + Supplementary Requirements: Impact Test At Room Temperature+Orientation Of The Test Specimen In Longitudinal Direction(S5); 120 X 1500= L = 2500 X 5000= L = 8000 [T X W X L] [Mm] , Pl 140 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2000 ; L= 10500;[Thickness, Length (L) & Width (W) Are In Mm; 140 X 2000 X 10500 [T X W X L] [Mm] , Pl 140 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 140 X 1800-2500 X 5000 = L = 6300 [T X W X L] [Mm] , Pl 140 Mm Sa515 Grade-70 Aa10404-05 + Supplementary Requirements: Impact Test At Room Temperature+Orientation Of The Test Specimen In Longitudinal Direction(S5); 140 X 2000 X 6000 [T X W X L] [Mm] , Pi 160 Mm Is2062 E250 Gr Br Tdc 301 Rev 12;Astm A435; 160 X 2500 X 6000-12000 [T X W X L] [Mm] , Pi 160 Mm Is2062 E250 Gr Br Tdc 301 Rev 12 (Impact Test Applicable At Room Temperature); 160 [T] X 2500 [W] X [6100-7000] [L] Mm; 160 X 2500 X 6100 = L = 7000 [T X W X L] [Mm] , Pl 190 Mm Is2062 E350 Gr C Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Ut: Astm A435, 190 Mm 2250 Mm 6300 Mm T X W X L (Mm); 190 X 2250 X 6300 [T X W X L] [Mm] , Pi 190 Mm Is2062 E250 Gr Br Tdc 301 Rev 12 (Impact Test Applicable At Room Temperature); 190 [T] X 2270 [W] X [5000-7500] [L] Mm; 190 X 2270 X 5000 = L = 7500 [T X W X L] [Mm]
