|
| 1 | Schedule \"A\" Part – I to Schedule \"A\" Part – XIII:NOTE: Schedule \"A\" Part – I to Part – XIII are pre-priced by MES. Bidders shall insert their Lump sum amount in Green coloured field under Column - 6 only |
| 2 | Lump sum price worked out by the contractor for \"Buildings & Structures\",as listed in Schedule \"A\" Part – I |
| 3 | Lump sum price worked out by the contractor for \"EARTH WORK AND SITE CLEARANCE\",as listed in Schedule \"A\" Part – II |
| 4 | Lump sum price worked out by the contractor for \"INTERNAL WATER SUPPLY\",as listed in Schedule \"A\" Part – III |
| 5 | Lump sum price worked out by the contractor for \"INTERNAL ELECTRIC SUPPLY, ENERGY METER, AVIATION LIGHT & HOT WATER SUPPLY\",as listed in Schedule \"A\" Part – IV |
| 6 | Lump sum price worked out by the contractor for \"EXTERNAL WATER SUPPLY & SEWAGE TREATED WATER SUPPLY\", as listed in Schedule \"A\" Part – V |
| 7 | Lump sum price worked out by the contractor for \"EXTERNAL ELECTRIC SUPPLY, LIFT & DG SET\", as listed in Schedule \"A\" Part – VI |
| 8 | Lump sum price worked out by the contractor for \"SEWAGE DISPOSAL\",as listed in Schedule \"A\" Part – VII |
| 9 | Lump sum price worked out by the contractor for \"AREA DRAINAGE\", as listed in Schedule \"A\" Part – VIII |
| 10 | Lump sum price worked out by the contractor for \"ROAD, PATH & CULVERT\",as listed in Schedule \"A\" Part – IX |
| 11 | Lump sum price worked out by the contractor for \"FIRE FIGHTING, FIRE DETECTION AND FIRE ALARM SYSTEM\",as listed in Schedule \"A\" Part – X |
| 12 | Lump sum price worked out by the contractor for \"TV & TELE SOCKET\",as listed in Schedule \"A\" Part – XI |
| 13 | Lump sum price worked out by the contractor for \"LIGHTNING PROTECTION\",as listed in Schedule \"A\" Part – XII |
| 14 | Lump sum price worked out by the contractor for \"PILE FOUNDATION\",as listed in Schedule \"A\" Part – XIII |
| 15 | Schedule \"A\" Part - XIV: [Miscellaneous Items] [Internal Water Supply; Internal Electric Supply &Aviation light; External Water Supply & Sewage treated water supply; External Electric Supply, Lift & DG set; Sewage Disposal; Road, Path & Culvert; Fire fighting, fire detection & fire alarm system; TV & Tele socket; STP; Pile foundation] |
| 16 | M&L for street light bracket made of GI pipe medium grade 32mm bore dia, appx 1.50 m long bent to shape suitable for fixing street light fixed to pole with 2 Nos of MS FI brackets with nuts and bolts complete including painting with two coats of aluminium paint over a coat of zinc chrome primer all as specified and as directed |
| 17 | S&F LED bulb 9/10 Watt with not less than 770 Lumen output complete all as directed. |
| 18 | S&F Modular white cover plate with frame 8 Module |
| 19 | S&F Bib taps, Two-way, 15mm bore, cast copper alloy, fancy type, chromium plated with crutch handle, long body with wall flange, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed. |
| 20 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PMMA strip lens reflector fixed with and including MS stud of suitable size as per manufacturer\"s instructions. |
| 21 | M&L for Concrete bed to 600mm bore RCC drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6, type C2 complete all as specified. |
| 22 | M&L for Boring for Bored cast -in-situ piles 600mm dia in any strata except hard rock using DMC method (Direct mud circulation) and getting out and disposal of spoil to a place out side MD land complete all as specified and as directed. |
| 23 | Carrying out initial load testing on 600mm dia piles of following testall as per IS complete all as specified and as directed including necessary anchoring and support piles of suitable load/size to be casted as required: |
| 24 | A) Compression test (Vertical load test) |
| 25 | B) Pull out test |
| 26 | C) Lateral test |
| 27 | Carrying out routine load testing on 600mm dia piles of following testall as per IS complete all as specified and as directed: |
| 28 | A) Compression test (Vertical load test) |
| 29 | B) Pull out test |
| 30 | C) Lateral test |
| 31 | Carrying out non destructive pile integrity testing on 600mm dia piles all as per IS complete all as specified and as directed. |
| 32 | Supply and install Expulsion type fuse unit (DO fuse) 11 KV, anti climbing device & danger notice plate |
| 33 | Supply, installation, testing & commissioning of HT 11 KV, 3 phase, 50 Hz totally enclosed metal clad switchgear Indoor type complete with Vacuum circuit breaker having rupturing capacity 250 MVA, overload and earth fault protection, ammeter, voltmeter and of rating up to 400 Amp complete with the following specifications:(i) 11 kV, 400 Amp, 26.3 KA/3-sec, Draw-Out Vacuum Circuit Breaker as per IEC-62271-100. Vacuum Circuit Breaker having 03 Nos. vacuum bottles of same make as of circuit breaker and panel, motorized spring charging mechanism (230V AC) with integral spring charging handle for manual charging, associated push-buttons, anti-pumping feature, and associated Shunt Trip/Close Coils (24V DC).(ii) Current Transformers 11 kV, 100-50/5A, Core 1: Class 5P10, 5VA, Core 2: Class 0.5, 5VA - Set of 03Nos. |
| 34 | (iii) Main Protection Relay shall be numerical IED Relay conforming to IEC 60255, having 04 CT Inputs with microprocessor based protection scheme for tripping the breaker on various faults like (a) over-current or earth-fault in any of the three phases, (b) circuit-breaker-failure alarm, (c) inter panel tripping/blocking signals via GOOSE based peer-to-peer communication on IEC61850 protocol. (d) Integrated arc flash protection with current and light sensingThe relay shall be communicable on IEC 61850 GOOSE platform over RJ-45/USB/FO port, and fully integrated with the feeder, internally capturing feeder statuses incl. various status, Line-Current, Breaker On/Off/Spring charged, Trip Circuit Failure (from TCS relay), Local-Remote etc. and display locally on a built-in back-lit LCD screen with mimic as a Single-Line-Diagram with current measurements and suitably labeled status LEDs.Relay setting should be possible through inbuilt software or through additional software supplied with life time software support by the relay manufacturer. |
| 35 | (iv) Metering Equipment including:-(a) 01 x Digital Voltmeter (Acc. Cl. 0.5), 01 x Digital Ammeter (Acc. Cl. 0.5), (b) 01 no. Multi-Function-Meter (Acc. Cl. 0.5) shall be provided with LCD display for measuring current, voltage, power, power-factor and energy parameters, Total Harmonic Distortion and Max. Demand Indication, same shall be communicable on ModBus via RS485 port.(v) LED Indications - (a) Breaker ON/OFF/TRIP/Spring-Charged, (b) Trip Circuit Healthy(vi) 08-Window Announciator with Hooter to indicate following alarms :- (a) OC Trip, (b) EF Trip(c) Trip Circuit Failure, (d) Inter-Tripping Fault, (e) The Announciator will be complete with required Acknowledge/Test buttons as required(f) All Multi-function-meters shall be connected in a ModBus loop terminating in to 01 No. ModBus-to-TCP/IP converter to be provided for sending data to SCADA console via networking switch. |
| 36 | (vii) Control Equipment including: (a) 01 x TNC Switch, (b) 01 x Emergency Trip Push Button, (c) 01 x Local/Remote Switch, (d) MCBs for AC/DC isolation(e) Heater Switch with Thermostat - 01no.(f) 3-pin socket with ON/OFF switch - 01no.(g) LED Lamp with ON/OFF switch - 01no.(viii) Flush mounted Auxiliary Protection Relays incl. (a) Trip Circuit Supervision Relay, (b) Master trip Relay,(ix) Suitable Disconnecting Link type terminal arrangement shall be provided for interfacing PS-Class CTs installed in the panel with existing VCB panel relay situated in the 11 KV CRP for achieving the required protection. |
| 37 | M&L for supply, fabrication, installation, connection, commissioning and testing of Indoor type LT panel board (Manufactured by CPRI Approved panel manufacturer) made out of 2.00 mm thick sheet metal floor mounted 3 ph 4 wire, 415V properly insulatedaluminium bus bar 1200 Amps 04 Nos dust and vermin proof front open with locking arrangementincluding suitable ISMC 75 as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified comprising of Digital voltmeter, ammeter suitable ratio CT’s phase indicator selectorswitch danger board plate completely painted withtwo coats of synthetic enameled paint over a coat of red oxide primer, fixing in position by provision of platform suitable size with brick work including addition / alternation required for fixing and connections of coming/outgoing cables & including glands, lugs & thimblessuitable for fixing incoming and outgoing all as specified and directed by Engineer-in-Charge. |
| 38 | a) LED/Neon indicator bulb in RYB Colour. b) Digital Voltmeter 0-500 volts, and Digital Ammeter 0-800 Amps of suitable size - 01 Set c) 3 phase over current and Earth fault relay range with RS 485 Incoming:-d) ACB 4 Pole, 415 V, Manual Draw-out type with Microprocessor release of capacity 800 Amps with breaking capacity 50 KA- 01 NosOutGoing:- e) MCCB 4 Pole, 415 V, Microprocessor release type, 630 A with breaking capacity 36 KA - 01 Nosf) MCCB 4 Pole, 415 V, Microprocessor release type, 200 A with breaking capacity 36 KA - 02 Nosg) MCCB 4 Pole, 415 V, Thermal Magnetic release type, 160 A with breaking capacity 36 KA - 04 Nos |
| 39 | M&L for supply, fabrication, installation, connection, commissioning and testing of Indoor type LT panel board (Manufactured by CPRI Approved panel manufacturer) made out of 2.00 mm thick sheet metalfloor mounted 3 ph 4 wire, 415V properly insulatedaluminium bus bar 300 Amps 04 Nos dust and vermin proof front open with locking arrangementincluding suitable ISMC 75 as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified comprising of Digital voltmeter, ammeter, suitable ratio CTs, phase indicator, selectorswitch, danger notice plate completely painted withtwo coats of synthetic enameled paint over a coat of red oxide primer, fixing in position by provision of platform of suitable size with brick work including addition / alternation required for fixing and connections of incoming/outgoing cables & including glands, lugs & thimblessuitable for fixing incoming and outgoing all as specified and directed by Engineer-in-Charge with and including following accessories: |
| 40 | a) LED/Neon indicator bulb in RYB Colour. b) Digital Voltmeter 0-500 volts, and Digital Ammeter 0-500 Amps of suitable size - 01 Set c) 3 phase over current and Earth fault relay range with RS 485-01 No Incoming:-d) MCCB 4 Pole, 415 V, Micro-processor release type, 200 A with breaking capacity 36 KA - 01 NosOutgoing:- e) MCCB 4 Pole, 415 V, Thermal Magnetic release type, 100 A with breaking capacity 25 KA - 04 Nosf) MCCB 4 Pole, 415 V, Thermal Magnetic release type, 63 A with breaking capacity 25 KA - 01 Nosg) MCB 4 Pole, 415 V, 20 A, C curve with breaking capacity 25 KA - 02 Nos h) MCB 2 Pole, 415 V, 16 A, C curve with breaking capacity 16 KA - 01 Nos |
| 41 | M&L for supply, fabrication, installation, connection, commissioning and testing of Outdoor type LT panel board (Manufactured by CPRI Approved panel manufacturer) made out of 3.15 mm thick sheet metal cubical feeder pillar box KIOSK type floor mounted 3 ph 4 wire, 415V properly insulatedaluminium bus bar 200 Amps 04 Nos dust and vermin proof front open with locking arrangementincluding suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice plate all as specified comprising of Digital voltmeter, ammeter suitable ratio CTs, phase indicator, selectorswitch, danger board plate completely painted withtwo coats of synthetic enameled paint over a coat of red oxide primer, fixing in position by provision of platform suitable size with brick work including fixing of glazed tiles over exposed surface and addition / alternation required for fixing and connections of coming/outgoing cables & including glands, lugs & thimblessuitable for fixing incoming and outgoing all as specified and directed by Engineer-in-Charge. |
| 42 | a) LED/Neon indicator bulb in RYB Colour, Make : L&T - 1 Set.b) Digital Voltmeter 0-500 volts, and Digital Ammeter 0-500 Amps of suitable size - 01 Set c) 3 phase over current and Earth fault relay range with RS 485 - 01 No Incoming:-d) MCCB 4 Pole, 415 V, Thermal Magnetic release type, 100A with breaking capacity 25 KA - 01 NoOutgoing:- e) MCCB 4 Pole, 415 V, Thermal Magnetic release type, 32 A with breaking capacity 25 KA - 01 Nof) MCCB 4 Pole, 415 V, Thermal Magnetic release type, 25 A with breaking capacity 25 KA - 01 Nog) MCB SPN, 415 V, 10 A with breaking capacity 25 KA - 01 No |
| 43 | M&L for supply, fabrication, installation, connection, commissioning and testing of Indoor type LT panel board (Manufactured by CPRI Approved panel manufacturer) made out of 2 mm thick sheet metal cubical feeder pillar box floor mounted 3 ph 4 wire, 415V properly insulatedaluminium bus bar 200 Amps 04 Nos dust and vermin proof front open with locking arrangementincluding suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified comprising of Digital voltmeter, ammeter suitable ratio CT’s phase indicator selectorswitch danger board plate completely painted withtwo coats of synthetic enameled paint over a coat of red oxide primer, fixing in position by provision of platform suitable size with brick work including fixing of glazed tiles over exposed surface and addition / alternation required for fixing and connections of coming/outgoing cables & including glands, lugs & thimblessuitable for fixing incoming and outgoing all as specified and directed by Engineer-in-Charge. |
| 44 | a) LED/Neon indicator bulb in RYB Colour,- 1 Set.b) Digital Voltmeter 0-500 volts, and Digital Ammeter 0-500 Amps of suitable size - 01 Set c) 3 phase over current and Earth fault relay range with RS 485 Incoming :- (d) MCCB 4 Pole, 415 V, Thermal Magnetic release type, 63 A with breaking capacity 25 KA - 01 NoOutgoing:- (e) MCCB 4 Pole, 415 V, Thermal Magnetic release type, 32 A with breaking capacity 25 KA - 02 Nos(f) MCB 4 Pole, 415 V, 20 A, C curve with breaking capacity 25 KA - 02 Nos,(g) MCB SPN, 415 V, 10 A with breaking capacity 25 KA - 01 No, (h) Fully automatic, Star delta starter for 3Ph, 415V, 17.5 HP Centrifugal pump set with over current and under voltage/single phasing protection- 2Nos. (i) Motor Protection circuit breaker for protection of motor of capacity 25 A, 3 Phase 415 Voltfrom Short circuit, Over current, Over load, Phase lose etc. |
| 45 | Supply and fix Sandwich bus bar trunking with Aluminium bus bars 630A, 50KA breaking capacity , IP 54 protection, class F insulation, epoxy painted 1.6mm GS housing, Uniblock joints between sections & end caps at the top end, Systems 415 V, 3 Phase, 4 Wireall as specified and as directed. |
| 46 | S&F Bus Bar Terminal Box, 3 Phase and Neutral [TPN], 415 Volts, with MCCB of 250 Amps Capacity with cable gland complete all as specified and as directed and of specification as below:[a] Conductor Material - Aluminium[b] Bus Duct Construction - Sandwich Type[c] Bus Duct Rating - 250 Amps[d] Rated Operation Voltage [UE] - 415 / 690 Volts and maximum up to 1000 Volts.[e] Rated Insulation Voltage [UE] - 1100 Volts[f] Degree of Protection - IP54 / IP 55 for Indoor and IP 65 / IP 66 for Outdoor |
| 47 | S&F Plug-in Box for tapping of 3 Phase supply in each floor and equipped with MCCB, 100 Amps, TPN, 25 KA, 415 Volts complete all as specified and as directed. |
| 48 | S&F Cable junction box of size (130x180x77 mm), IP 66, halogen free and weather proof for outdoor installation of street lights, complete with terminals suitable for cable size 25 sq.mm 4 core complete including supply & fixing of M.S flat iron clamps of suitable size all as specified and as directed by Engineer-in-Charge. (Make : Hensel Cat No. DK 1010 G or equivalent in Sintex/Legrand/ Schneider) |
| 49 | S&F street light timer panel 40 Amps, 3 Pole, 230 Volts, Digital Time Switch, 24 Hours, with MCB 40 Amps, TP, Out door type, weather and vermin proof made out of CRCA Sheet duly powder coated with locking arrangement comprising of One Number Timer Switch, 24 Hours Operation, Accuracy: Quartz Time Base ±1 per day suitable for street light operation and duly fixed on pole with clamps / grouting on ground complete all as directed.Make: Indo Asian, Cat No. TL040DBO or equivalent in Havells/ Schneider / L&T |
| 50 | Supply and laying in trenches DWC HDPE flexible pipe of 200mm internal dia Class SN-4 with rubber ring joints conforming to IS 16098 (Part-2) along with connected accessories like couplers, bends, end caps etc. for sewage application all as specified and as directed. |
| 51 | Supply and laying in trenches DWC HDPE flexible pipe of 150mm internal dia Class SN-4 with rubber ring joints conforming to IS 16098 (Part-2) along with connected accessories like couplers, bends, end caps etc. for sewage application all as specified and as directed. |
| 52 | Sewage Treatment Plant of capacity 70 KLD: Design (hydraulically, structurally & aesthetically) engineering, procurement, construction, testing and commissioning of Sewage Treatment Plant based on Moving Bed Bio Reactor Technology (MBBR) with tertiary treatment having capacity of70 KLDlocated at CGRAas shown in the site plan. It comprises of Inlet chamber, fine bar screen chamber, oil and grease chamber, Air grid, Sewage pump, Air blower, equalization tank, anoxic chamber, anoxic pump, MBBR Tanks, Lamellar settling tank, sludge pump, Chlorine contact cum feeder tank, chlorine dosing system, feed pumps, multi-grade filter, activated carbon filter, sludge drying beds, treated water tank, clear water pumps, cables, pipe, earthing, testing equipment, foundation for all E/M equipment, pump house associated piping works with required valves, gates, drains, pathways, electrical control panels with interconnecting cables including spare parts required to keep STPs functional till defect liability period of 2 years of operation etc. complete as turnkey job including hydraulic testing with all involved civil, electrical, digital, mechanical works. The maintenance of the plant shall be the responsibility of the contractor during defect liability period (DLP)Make: ION EXCHANGE INDIA LTD./ THERMAX LTD.,/ M/S OPTIMUS ENVIIROPRO PVT LTD or any other OEM APPROVED BY E-in-C\"s BRANCH. |
| 53 | Notes1: -(a) Complete scheme shall be designed by the contractor based on Design parameters i.e. Raw sewage characteristics and treated sewage characteristics after tertiary treatment. The scheme shall be prepared by the contractor andvetted by IITs/NITs. /Govt. University for further approval from the accepting officer. The detailed design shall commence only after approval of the scheme.(b) The structural drawings shall be developed based on the final approved scheme duly vetted by IITs/NITs. The final approved scheme and drawings duly signed by the contractor’s authorized representative shall be submitted to the accepting officer for approval in six A1 hard copies and softcopy (CD).(c)The items mentioned above are indicative only. Any items required over and above for completion and efficient functioning of the plant are deemed to be included in the rate quoted by the contractor.(d) The treated water shall be tested quarterly up to DLP by the contractor from NABL accredited Lab and the test should conform to the parameters of treated water within limits as mentioned in Particular Specification. Nothing extra shall be payable for the same.(e) All the finalized drawings shall form part of the tender and all clauses for design of RCC structural elements mentioned in the tender shall be applicable thereto. |
| 54 | (f) Preparation and submission of architectural drawings and structural drawing & design by using design software like STAAD/ETABS with load chart for entire structural components, viz. walls, columns, beams, slabs, staircases, tanks etc., along with structural drawings and complete design folder containing structural analysis and design calculations duly vetted by any IIT/NIT.(g) For design purpose, expected life of building to be considered as minimum 50 years. The design shall be sound, economical and as per best engineering practices suitable for the region. Design shall be compliant of provisions of all relevant IS codes and statutory rules of Govt of India/concerned state Govt.(h)Design and detailing shall be as per requirements applicable to the Mandapam area in respect of seismic forces as per IS code 1893, wind forces as per IS code 875 part 3, dead loads as per IS code 875 part 1, live loads as per IS code 875 part 2. (i) Structural design of foundation shall be based on a detailed soil investigation to be carried out by the contractor. The structural designer should analyze the soil investigation report completely and merely depending on the recommendation part. If any inconsistent data is found part of the soil investigation report, clarifications shall be obtained from GE (I)(CG) Chennai under intimation to E2 (Des) section of HQ CE (CG) Visakhapatnam.(j) Structural design of RCC structure shall be as per IS 456, IS 1893 & IS 13920 and detailing shall be as per IS 456, SP 34 and IS 13920.(k) For detailing and design ‘severe’ environmental exposure conditions and 2 hrs. fire rating shall be considered. (l) Contractor shall consider existing invert levels for design of STP in consultation with GE. |
| 55 | TESTING: Testing and commissioning of STP will include testing of all electro-mechanical equipments, treated effluent parametersfor treatment of the sewage, etc starting from collection chamber to outlet of tertiary treatment plant. (i) The plant shall be run continuously for minimum 72 hours. Testwill be carried out in the presence of GE and Engineer-in-Charge, Contractor/rep of contractor and Rep of OEM. Contractor shall deploy adequate technical staff to operate the plant continuously for 72 hours and he shall be liable to carry out all the maintenance / rectification required during this period . (ii) The contractor shall afford all facilities and make all necessary arrangements for these tests at his own cost. All arrangements including various instruments required to facilitate testing shall be arranged by contractor.(iii) If the test results are not acceptable, all repairs and replacement and extra work of removal and relaying or refixing shall be carried out by the contractor at his own expense and the STP plant will be retested, until test results indicate compliance with the prescribed requirement. (iv) The installation shall be taken over by MES after the plant has been successfully commissioned and tested . |
| 56 | (v) Quarterly test report of the treated effluent will be submitted by the contractor during the period of DLP.TEST EQUIPMENT: The contractor will submit the following test equipments (minimum) deemed to be included in the contract.pH Meter Digital- 01 NosTDS Meter Digital Tester-01 Nos Chlorine Testing Kits-03 Nos (vi) any other equipments required for testing shall also be provided by the contractor, no extra cost will be paid on this regard.NOTES2:- (i) Defect liability period of Two year.(Repair / replacement/spares of various plant components, including labour for such work covered under performance Guarantee)(ii) The items given above are indicative only. Any items required over and above items, for complete and efficient functioning of the plant is deemed to be included in the rates quoted by the tenderer. (iv) Rates of all civil work including foundation of machinery etc deemed to be included in the work.(v)All works shall be carried out by skilled technicians of relevant trade under supervision of rep of OEM.(vi) The routing of cables/pipes/drains etc , shall have proper protection. The workmanship, finish, general appearance & layout of the plant shall be technically correct and aesthetic; all as directed by Engineer in Charge.(vii) Tenderer’s offered rate shall be deemed to include training and operation for 1 month after completion of the plant. |
| 57 | Supplying, installing, testing & commissioning of Silent engine generating set of capacity 100 kVA with acoustic enclosure as per new CPCB-IV+ norms of emission control, 415 volts,3 phase 0.8 power factor 50 Hz, 1500 RPM self excited self regulated brushless AC generator including acoustic enclosure suitable for ambient condition and conforming to condition under IS 4722, BS 5514/ 2613 /5000 with suitable AMF Panel as per manufacturer\"s recommendationscomplete all as specified and directed withthe following :-(A) Alternator :-Standard design alternator rated at 100 kVA net output at site after considering de-rating as per site conditions at 0.8 (lag) power factor AC,3 phase, 4 wire, 415 volts, 50 Hz, 1500 RPM, self excited self regulated screen protected drip proof IP 23 enclosure brushless design with winding in pole faces, insulating class \"H\" and voltage regulation of+/- 1% at rated voltage from no load to full load. The alternator shall be conforming to BS 2613/5000 and shall be imposition to generate supply with frequency regulation with in +/- 1% tolerance. The alternator will be suitable for tropical climate and shall generally conform to BS - 2613/5000/ IS – 4722. The Alternator shall be:-(i) Insulation class - \"H‘(ii) Temperature rise Class - \"H‘ (iii) Excitation : Self Excited (iv) Regulation performance: The voltage is kept constant with +/- 1%, manual voltage adjustment within +/- 5% (v) Frequency regulation +/- 1%. |
| 58 | (B) Diesel Engine: - Adequate capacity of Diesel engine on manufacturers technical details air/ water cooled to drive independently above alternator and after considering de-rating as per site conditions after generating and reducing power consumed by accessories directly coupled through flexible coupling multi cylinder multi stroke direct injection, cold starting 1500 RPM, as per relevant ISI/BS - 5514 with an overload capacity of 10% for half an hour in 12 hours continuous running complete with standard accessories all as specified and required for safe handling and operation salient features of accessories shall be as under :- i) Fly wheel with housing ii) Cooling system :- Moulded radiator with fan & belts iii) Cooling Water pump : - Centrifugal type belt driveniv) Exhaust System :-As per OEM Tech Specs. Exhaust gas turbo charger type. Exhaust manifold Silencer : Residual type Bellows v) Fuel System :- Fuel injection system with fuel injectors, fuel injection solenoid switch controlled by electronic governor for 1% speed /frequency regulation, Fuel filters,Fuel hoses. vi) Lub oil System :(a) Lubricating oil filter(b) Lubricating oil pump vii) Air Intake System :(a) Air intake Manifold - Air cleaner dry typeviii) Governor :- Electronic Governor ix) Starting System :- Electric Self starter with maintenance free battery including battery charging alternator |
| 59 | x) Batteries :- Batteries of maintenance free of capacity as recommended by the manufacturer complete with copper conductor multi stranded leads of suitable length fromself starter to the battery terminals complete with initial charge and initial fill of electrolyte all as specified and Starter gear ring Start and stop push button, Ignition key / Switch Handling and operation : Salient features of accessories shall be as under: Radiator with blower fanCorrosion inhibitor coolant, Paper element filters for fuel, lub oil and by pass, Electronic governor controlled direct fuel injection system Fly wheel housing and fly wheel xi) Coupling arrangement: - Flexible coupling, fly wheel to suit flexible coupling xii) Accessories :- AVM Pads built in enclosure and for entire unit on platform.xiii) Base Frame : - Should be provided as OEM normsxiv) Fuel Tank :-As per OEM tech Spec. |
| 60 | (C) GENERATOR CONTROL PANEL:- The standard microprocessor based control panel shall befabricated made out of CRCAsheet and powder coated in side and out side and shall displayas follows:-(i)Voltage of all Three phases,(ii)Currentof all Three phases, (iii)Frequency, (iv)Bus bar Chamber with aluminumbus bar of cap 500 Amps- 04 Nos, (v) C.T. 100/5 Amps - 03 Nos. (vi)MCCB TPN, of appropriate capacity- 01 No and the digital panel should display Engine temperature, Coolant Temperature, Hour run, Oil pressure, RPM, Battery Volt etc as per standard.(D) Acoustic Enclosure:-Manufactured by OEM suitable for 100 kVA DG Set(i) NAL approved as per CPCB-IV+ (ii) It Should be as per latest rules and regulations of Ministry of Environment and Forest and Pollution control board (iii) The generating setbatteries and control panel should be inside the enclosure. (iv) Fuel tank should be integral part and inside the enclosure. (v) Construction Details/specification are as follows:a) Outer body :- As per OEM Tech Spec b) Doors :- As per OEM Tech Specc) Sound Insulation :- As per OEM Norms vi) The acoustic enclosure should be composite in construction and fully assembled integral unit (vii) The batteries should be placed inside the enclosure beside the DG Set on a suitable insulatedplatform viii) The DG Set should be provided with external Emergency stop push button. ix) The enclosure should be suitably illuminated by LED Lamp fittings. x) The noise level should be 75 dba at 1m under free field conditions. xi) The acoustic enclosure parts shall be of powder coated after pre treatment process. The powder coating shade should be Gen set Green. The base frame should be painted with epoxy based black shade. Note : Foundation should be provided as per OEM recommendation and 300 mm platform beyond all side of DG set and the cost for the same is inclusive in quoted rate. |
| 61 | Supply and fix solid state electronic type aviation obstruction light fitting comprising 300 Nos LEDs with cast aluminium polycarbonate red colour, with control switch and connecting& testing complete on top of Buildings all as directed. |
| 62 | Design, supply, install, testing and commissioning of electrically operated 08 passengers Lift (544 Kg) in the existing lift well, speed 1.5 metre/sec, lift with single speed motor (Gearless machine) of 415 volts, 3 phase, 50 Hz AC supply conformingto IS-14665, suitable to serve Stilt + 9 upper floors i.e. with 10 stops and 10 landings with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening sliding stainless steel door with moon rock finish of 16 gauge with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system with batteries, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door), complete all as specified and directed. |
| 63 | (a) TECHNICAL SPECIFICATIONS(i) Type & Capacity: electrically operated Passenger elevator for 08 persons (544Kg).(ii) Type of drive: Variable voltage and variable frequency drive with microprocessorbased controller + 5 mm landing accuracy with speed encoder.(iii) Speed: 1.5 meter per second.(iv) Travel: Suitable for passenger travel to serve G+9, (opening on same side).(v) Existing well size: 1900 mm x 2600 mm deep (over plaster) (approx) without anyprojected beam/column.(vi) Power supply: 03 Phase, 415 V, 50Hz (should withstand variation of + 5%).(vii) Inner size: Shall be as per relevant IS specifications.(viii) Car enclosure: Stainless steel panel body of 16 gauge with moon rock finish, Car frame floor integrity to be ensured. SS false ceiling (hairline finish) and stainless steel handrail of standard dia and size with hair line finish and splinter proof mirror of 4mm thickness in front half of the lift car. |
| 64 | (ix) Flooring: Polished granite flooring.(x) Electric light: LED Light fitting (Min 04 Nos).(xi) Fan: Fresh Air fan 380mm sweep – 01 No.(xii) Car entrance: Automatic, centre opening, sliding doors.(xiii) Clear opening: Not less than 900mm x 2000mm high.(xiv) Operation door: Automatic operation with stainless steel frame front opening landing door of toughened glass not less than 12 mm thick.(xv) Control: Simplex full collective with and without attendant.(xvi) Indicators: Hall position indicators for car & landing direction and position indicatorwith stainless steel fixtures at all floors.(xvii) Main drive and control shall be latest, high efficient and low power consumption. |
| 65 | (b) STANDARD FEATURES(i) Anti nuisance car call protection.(ii) Automatic car return device (home landing).(iii) Independent service (for duplex only).(iv) Overloading device with tripping system including warning indicator both audio and visual types.(v) Nudging buzzer if door is held open for more than 30 sec..(vi) Emergency fireman’s service.(vii) Audible car call button.(viii) Emergency car light unit.(ix) High performance contact free infrared curtain door protection.(x) Door time adjustable from (0-30 Sec).(xi) Emergency alarm button.(xii) Extra door time of lobby & parking.(xiii) Door open close button.(xiv) Manual rescue operation.(xv) Belt inspection device.(xvi) Suitable phase reverse relay shall be provided to the controller to protect lift against phase reversal, phase failure and low voltage. (xvii) Set of three limit switches at the bottom and top most position of lift hoist ways as specified in IS.(xviii) Indoor communication to be connected with nearest security post. |
| 66 | (c) ADDITIONAL FEATURES(i) Automatic rescue device.: During power failure and manual operation suitable provision shall be provided to run the lift with full load to the nearest floor (ii) Floor announcement system: Each floor shall be provided with announcement system. |
| 67 | (D) HUMAN INTERFACE DEVICE (HID)(i) Hall button with micro stroke push buttons combined with 16-segment digital LEDdisplay position indicator.(ii) Full height car operating panel with micro stroke call push buttons (located on sidepanel) .(iii) Door open/Door closed on car operating panel.(iv) 2-way intercommunication system.(v) Monochrome LED digital position indicator display.(vi) Battery operated alarm bell & emergency light.(vii) Fireman’s switch at main lobby.(viii) Manual rescue operation.(ix) Call register indicator in all landings.(x) Attendant operation system in car panel. |
| 68 | Design, supply, install, testing and commissioning of electrically operated 08 passengers Lift (544 Kg) in the existing lift well, speed 1.5 metre/sec, lift with single speed motor (Gearless machine) of 415 volts, 3 phase, 50 Hz AC supply conformingto IS-14665, suitable to serve Stilt + 7 upper floors i.e. with 8 stops and 8 landings with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening sliding stainless steel door with moon rock finish of 16 gauge with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system with batteries, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door), complete all as specified and directed. |
| 69 | (a) TECHNICAL SPECIFICATIONS(i) Type & Capacity: electrically operated Passenger elevator for 08 persons (544Kg).(ii) Type of drive: Variable voltage and variable frequency drive with microprocessorbased controller + 5 mm landing accuracy with speed encoder.(iii) Speed: 1.5 meter per second.(iv) Travel: Suitable for passenger travel to serve G+7, (opening on same side).(v) Existing well size: 1900 mm x 2600 mm deep (over plaster) (approx) without anyprojected beam/column.(vi) Power supply: 03 Phase, 415 V, 50Hz (should withstand variation of + 5%).(vii) Inner size: Shall be as per relevant IS specifications.(viii) Car enclosure: Stainless steel panel body of 16 gauge with moon rock finish, Car frame floor integrity to be ensured. SS false ceiling (hairline finish) and stainless steel handrail of standard dia and size with hair line finish and splinter proof mirror of 4mm thickness in front half of the lift car. |
| 70 | (ix) Flooring: Polished granite flooring.(x) Electric light: LED Light fitting (Min 04 Nos).(xi) Fan: Fresh Air fan 380mm sweep – 01 No.(xii) Car entrance: Automatic, centre opening, sliding doors.(xiii) Clear opening: Not less than 900mm x 2000mm high.(xiv) Operation door: Automatic operation with stainless steel frame front opening landing door of toughened glass not less than 12 mm thick.(xv) Control: Simplex full collective with and without attendant.(xvi) Indicators: Hall position indicators for car & landing direction and position indicatorwith stainless steel fixtures at all floors.(xvii) Main drive and control shall be latest, high efficient and low power consumption. |
| 71 | (b) STANDARD FEATURES(i) Anti nuisance car call protection.(ii) Automatic car return device (home landing).(iii) Independent service (for duplex only).(iv) Overloading device with tripping system including warning indicator both audio and visual types.(v) Nudging buzzer if door is held open for more than 30 sec..(vi) Emergency fireman’s service.(vii) Audible car call button.(viii) Emergency car light unit.(ix) High performance contact free infrared curtain door protection.(x) Door time adjustable from (0-30 Sec).(xi) Emergency alarm button.(xii) Extra door time of lobby & parking.(xiii) Door open close button.(xiv) Manual rescue operation.(xv) Belt inspection device.(xvi) Suitable phase reverse relay shall be provided to the controller to protect lift against phase reversal, phase failure and low voltage. (xvii) Set of three limit switches at the bottom and top most position of lift hoist ways as specified in IS.(xviii) Indoor communication to be connected with nearest security post. |
| 72 | (c) ADDITIONAL FEATURES(i) Automatic rescue device.: During power failure and manual operation suitable provision shall be provided to run the lift with full load to the nearest floor (ii) Floor announcement system: Each floor shall be provided with announcement system. |
| 73 | (D) HUMAN INTERFACE DEVICE (HID)(i) Hall button with micro stroke push buttons combined with 16-segment digital LEDdisplay position indicator.(ii) Full height car operating panel with micro stroke call push buttons (located on sidepanel) .(iii) Door open/Door closed on car operating panel.(iv) 2-way intercommunication system.(v) Monochrome LED digital position indicator display.(vi) Battery operated alarm bell & emergency light.(vii) Fireman’s switch at main lobby.(viii) Manual rescue operation.(ix) Call register indicator in all landings.(x) Attendant operation system in car panel. |
| 74 | Design, supply, install, testing and commissioning of electrically operated 13 passengers Lift (884 Kg) in the existing lift well, speed 1.5 metre/sec, lift with single speed motor (Gearless machine) of 415 volts, 3 phase, 50 Hz AC supply conformingto IS-14665, suitable to serve Stilt + 9 upper floors i.e. with 10 stops and 10 landings with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening sliding stainless steel door with moon rock finish of 16 gauge with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system with batteries, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door), complete all as specified and directed. |
| 75 | (a) TECHNICAL SPECIFICATIONS(i) Type & Capacity: electrically operated Passenger elevator for 13 persons (884Kg).(ii) Type of drive: Variable voltage and variable frequency drive with microprocessorbased controller + 5 mm landing accuracy with speed encoder.(iii) Speed: 1.5 meter per second.(iv) Travel: Suitable for passenger travel to serve G+9, (opening on same side).(v) Existing well size: 2100 mm x 2600 mm deep (over plaster) (approx) without anyprojected beam/column.(vi) Power supply: 03 Phase, 415 V, 50Hz (should withstand variation of + 5%).(vii) Inner size: Shall be as per relevant IS specifications.(viii) Car enclosure: Stainless steel panel body of 16 gauge with moon rock finish, Car frame floor integrity to be ensured. SS false ceiling (hairline finish) and stainless steel handrail of standard dia and size with hair line finish and splinter proof mirror of 4mm thickness in front half of the lift car. |
| 76 | (ix) Flooring: Polished granite flooring.(x) Electric light: LED Light fitting (Min 04 Nos).(xi) Fan: Fresh Air fan 380mm sweep – 01 No.(xii) Car entrance: Automatic, centre opening, sliding doors.(xiii) Clear opening: Not less than 900mm x 2000mm high.(xiv) Operation door: Automatic operation with stainless steel frame front opening landing door of toughened glass not less than 12 mm thick.(xv) Control: Simplex full collective with and without attendant.(xvi) Indicators: Hall position indicators for car & landing direction and position indicatorwith stainless steel fixtures at all floors.(xvii) Main drive and control shall be latest, high efficient and low power consumption. |
| 77 | (b) STANDARD FEATURES(i) Anti nuisance car call protection.(ii) Automatic car return device (home landing).(iii) Independent service (for duplex only).(iv) Overloading device with tripping system including warning indicator both audio and visual types.(v) Nudging buzzer if door is held open for more than 30 sec..(vi) Emergency fireman’s service.(vii) Audible car call button.(viii) Emergency car light unit.(ix) High performance contact free infrared curtain door protection.(x) Door time adjustable from (0-30 Sec).(xi) Emergency alarm button.(xii) Extra door time of lobby & parking.(xiii) Door open close button.(xiv) Manual rescue operation.(xv) Belt inspection device.(xvi) Suitable phase reverse relay shall be provided to the controller to protect lift against phase reversal, phase failure and low voltage. (xvii) Set of three limit switches at the bottom and top most position of lift hoist ways as specified in IS.(xviii) Indoor communication to be connected with nearest security post. |
| 78 | (c) ADDITIONAL FEATURES(i) Automatic rescue device.: During power failure and manual operation suitable provision shall be provided to run the lift with full load to the nearest floor (ii) Floor announcement system: Each floor shall be provided with announcement system. |
| 79 | (D) HUMAN INTERFACE DEVICE (HID)(i) Hall button with micro stroke push buttons combined with 16-segment digital LEDdisplay position indicator.(ii) Full height car operating panel with micro stroke call push buttons (located on sidepanel) .(iii) Door open/Door closed on car operating panel.(iv) 2-way intercommunication system.(v) Monochrome LED digital position indicator display.(vi) Battery operated alarm bell & emergency light.(vii) Fireman’s switch at main lobby.(viii) Manual rescue operation.(ix) Call register indicator in all landings.(x) Attendant operation system in car panel. |
| 80 | Design, supply, install, testing and commissioning of electrically operated 13 passengers Lift (884 Kg) in the existing lift well, speed 1.5 metre/sec, lift with single speed motor (Gearless machine) of 415 volts, 3 phase, 50 Hz AC supply conformingto IS-14665, suitable to serve Stilt + 7 upper floors i.e. with 8 stops and 8 landings with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening sliding stainless steel door with moon rock finish of 16 gauge with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system with batteries, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door), complete all as specified and directed. |
| 81 | (a) TECHNICAL SPECIFICATIONS(i) Type & Capacity: electrically operated Passenger elevator for 13 persons (884Kg).(ii) Type of drive: Variable voltage and variable frequency drive with microprocessorbased controller + 5 mm landing accuracy with speed encoder.(iii) Speed: 1.5 meter per second.(iv) Travel: Suitable for passenger travel to serve G+7, (opening on same side).(v) Existing well size: 2100 mm x 2600 mm deep (over plaster) (approx) without anyprojected beam/column.(vi) Power supply: 03 Phase, 415 V, 50Hz (should withstand variation of + 5%).(vii) Inner size: Shall be as per relevant IS specifications.(viii) Car enclosure: Stainless steel panel body of 16 gauge with moon rock finish, Car frame floor integrity to be ensured. SS false ceiling (hairline finish) and stainless steel handrail of standard dia and size with hair line finish and splinter proof mirror of 4mm thickness in front half of the lift car. |
| 82 | (ix) Flooring: Polished granite flooring.(x) Electric light: LED Light fitting (Min 04 Nos).(xi) Fan: Fresh Air fan 380mm sweep – 01 No.(xii) Car entrance: Automatic, centre opening, sliding doors.(xiii) Clear opening: Not less than 900mm x 2000mm high.(xiv) Operation door: Automatic operation with stainless steel frame front opening landing door of toughened glass not less than 12 mm thick.(xv) Control: Simplex full collective with and without attendant.(xvi) Indicators: Hall position indicators for car & landing direction and position indicatorwith stainless steel fixtures at all floors.(xvii) Main drive and control shall be latest, high efficient and low power consumption. |
| 83 | (b) STANDARD FEATURES(i) Anti nuisance car call protection.(ii) Automatic car return device (home landing).(iii) Independent service (for duplex only).(iv) Overloading device with tripping system including warning indicator both audio and visual types.(v) Nudging buzzer if door is held open for more than 30 sec..(vi) Emergency fireman’s service.(vii) Audible car call button.(viii) Emergency car light unit.(ix) High performance contact free infrared curtain door protection.(x) Door time adjustable from (0-30 Sec).(xi) Emergency alarm button.(xii) Extra door time of lobby & parking.(xiii) Door open close button.(xiv) Manual rescue operation.(xv) Belt inspection device.(xvi) Suitable phase reverse relay shall be provided to the controller to protect lift against phase reversal, phase failure and low voltage. (xvii) Set of three limit switches at the bottom and top most position of lift hoist ways as specified in IS.(xviii) Indoor communication to be connected with nearest security post. |
| 84 | (c) ADDITIONAL FEATURES(i) Automatic rescue device.: During power failure and manual operation suitable provision shall be provided to run the lift with full load to the nearest floor (ii) Floor announcement system: Each floor shall be provided with announcement system. |
| 85 | (D) HUMAN INTERFACE DEVICE (HID)(i) Hall button with micro stroke push buttons combined with 16-segment digital LEDdisplay position indicator.(ii) Full height car operating panel with micro stroke call push buttons (located on sidepanel) .(iii) Door open/Door closed on car operating panel.(iv) 2-way intercommunication system.(v) Monochrome LED digital position indicator display.(vi) Battery operated alarm bell & emergency light.(vii) Fireman’s switch at main lobby.(viii) Manual rescue operation.(ix) Call register indicator in all landings.(x) Attendant operation system in car panel. |
| 86 | Supply and fix Centrifugal pump set Mono-block suitable for 415 V, 3 phase of 15 HP capacity with head not less 60 Mtr complete including suitable mild steel base frame duly painted with anti corrosive enamel paint complete all as specified and as directed pls. |
| 87 | Supply and fix Centrifugal pump set Mono-block suitable for 415 V, 3 phase of 7.5 HP capacity with head not less 15 Mtr complete including suitable mild steel base frame duly painted with anti corrosive enamel paint complete all as specified and as directed pls. |
| 88 | Supply & Fix Fully automatic star delta starter for 3 Ph, 415 V, 7.5 HP Centrifugal pump set with over current and under voltage/single phasing protection complete all as directed. |
| 89 | M&L for wall mounted meter box enclosure made of 2 mm thick CRCA sheet along with RAL coated painting, with provision of 2 Nos of compartments for DOL starters including proper doors with locking system with hinges and proper holes for in & out connection of the starters complete all as specified and as directed by Engg in Charge. |
| 90 | S&F sheet steel powder coated distribution board Vertical type TPN 4 ways, 415 volts, with 200 Amps rated copper bus bar, neutral link, earth bar, IP 43 protection and double door, suitable for mounting 4 pole MCCB up to 160 Amps as incomer and MCBs as out going complete fixed flush to the wall surface with and including 01 x MCCB TPN 40 Amps 16 KA and 2 x MCB TP 32 Amps 10 KA all as specified and as directed.[Note: Rate quoted shall include for MCCB & MCBs] |
| 91 | M&L for PN 1.6 rated 100mm NB cast iron foot valve for suction lift confirming to IS 4038 with stainless steel wire mesh, bolts, nuts & washers etc flanged end connections complete all as specified and directed by the Engineer-in-charge. |
| 92 | S&F gun metal globe or gate valve of 80mm bore conforming to IS 9338, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 93 | Supply, installation, testing & commissioning chemical dosing system with necessary fixing arrangement to waterline complete of the following specifications:1. Receptacle for power-free-automatic water sanitizer/ conditioning treatment station with proportional dosing arrangement with following attachments:-(a) Water inlet valve(b) Overflow valve (Rubber guard included)(c) Outlet valve for standalone gravity flow(d) Outlet valve for automated flow(e) Drain valve(f) Level controller(g) Level gauge(h) Detachable grouting bas with rubber buffer(j) Custom cover synchronous fixing arrangement(k) Material of construction : Non-metallic thermoplastic(l) Maximum Temperature : 45°C(m) Capacity : 100 litres (n) Shape : Cylindrical(p) Compatibility : Stequa 411 AE Refill/Prefill-Total refill |
| 94 | 2. Custom cover for power-free automatic water sanitizer / conditioning treatment station with proportional dosing arrangement with following attachments:(a) Refill Cavity Lids (13)(b) In-built Level Switch & Processor(c) ½\" Processor Outlet & Processor Inlet connections(d) Flexible Connecting Duct(e) Material of construction: Non-metallic(f) Maximum Temperature: 45°C(g) Shape: Circular(h) Compatibility: Stequa 411 AE Refill / Prefil - Total refill Note: Necessary cutting/fabrication work deemed to be included in the quoted rate.Make: Stequa Dosing System, Model ADS – Pro of M/s Declibac or equivalent inPotter & Watts/ Brio Zing. |
| 95 | Material and labour for construction of valve chambers of internal size 450x450x600 mm depth including excavation and earthwork. PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate, 150 mm thick & 150 mm wide offsets around over 100 mm thick hardcore, 200 mm thick PCC block masonry walls built in CM 1:4, 100 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/dense soil 6 mm thick MS sheet cover fixed on 25 mm X 25 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed. |
| 96 | Supply & fix centrifugal water pump single phase of capacity 1HP with all fittings complete all as specified and directed |
| 97 | S&F DOL starter suitable for 1HP single phase motor complete all as specified and as directed. |
| 98 | Drilling and tapping cast iron water mains (in position) for branch connections ofinternal dia 25mm |
| 99 | S&F pressed steel terminal boxes 100x100mm and 60mm deep for TV/ tele socket etc with 3mm thick plastic laminated sheet cover complete all as directed. |
| 100 | M&L for telephone cables with high density polyethylene insulated, solid annealed high conductivity bare copper with dia 0.5mm, paired, polyester taped and sheathed with high oxygen index fire retardant PVC compound, generally conforming to ITD specifications G/WIR-06/02 May 94 of 1- Pair drawn through PVC conduit and connecting and testing complete.Note: PVC conduit shall be measured and paid separately |
| 101 | M&L for TV Co-axial cable of RG59 Electrolytic Grade solid annealed Copper conductor, Jelly filled, Aluminium foiled and Aluminium wire Braided drawn through PVC conduit and connecting and testing complete. Note: PVC conduit shall be measured and paid separately |
| 102 | Supply & fixing telephone Jack RJ-11 1 module for Telephone and intercom connection |
| 103 | Supply & fixing modular television socket 1 module forTV connection |
| 104 | Supply & fixing rosette junction box |
| 105 | S&F Lan/CCTV socket including PVC sunken box 6 UTP Information socket -category 6-UTP - 1 module |
| 106 | M & L for PN 1.6 rated 200 mm NB polypropylene vortex inhibitor suction lift, conforming to BS 4504 with stainless wire mesh, bolts, nuts and washers, etc. complete all as specified and directed by the engineer-in-charge. |
| 107 | S & F 6 kg capacity dry chemical powder (ABC) type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket / floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed by the engineer-in-charge. |
| 108 | S & F of 4.5 kg light-weight squeeze grip CO2 type fire extinguisher, conforming to IS 15683: 2006, with CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel with wheel type valve, discharge nozzle, bend & horn, wall mounting bracket / floor trolley mounting accessories along with suitable signage complete all as specified and directed by the engineer-in-charge. |
| 109 | S&F fire extinguisher, mechanical foam type, ISI marked, foam (AFFF) type9 Ltr capacity fitted with forged brass squeezer lever discharge valveconforming to IS: 15683:2006 complete with initial refill consisting of ISI marked CO₂ gas cartridge of 60 gms capacity conforming to IS 4947 and ISI marked AFFF conforming to IS 4989suitable for operating between +50°C, fire rating class 3A & 34B all as specified and as directed. |
| 110 | M&L for Fire Stand for hanging 2 Nos. Fire buckets made out of mild steel angle iron duly painted with synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed. |
| 111 | S & F Galvanized mild steel Fire bucket (Filled with dry sand) conforming to IS 2546: 1974 round bottom type enamel painted, white inside & Red out side and Letter \"FIRE\" in black out side and handle with mounting bracket complete as specified and directed by the engineer-in-charge. |
| 112 | Supply and fix CS Air Vent Valves with single air outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in GI Water supply mains of size 100 mm dia complete all as specified and as directed. |
| 113 | M&L for PN 1.6 rated 200mm NB cast iron foot valve for suction lift confirming to IS 4038 with stainless steel wire mesh, bolts, nuts & washers etc flanged end connections complete all as specified and directed by the Engineer-in-charge. |
| 114 | M&L for low smoke zero halogen (LS0H) fire survival control cable of size 2 core 2.5sq.mm with circuit integrity, confirming to BS 7846 and rated for 600V, having plain annealed stranded copper conductor with fire resistant mica tapes covered by an extruded layer of cross linked polyethylene extruded layer of thermoplastic low smoke zero halogen (LS0H) compound, single layer of galvanized steel wires and thermoplastic LS0H compound sheet suitable for operating temperature range 40°C to +90°C and minimum bending radius being 12 times the overall cable diameter, including laying, clamping, termination and ferruling complete all as specified and directed by the Engineer-in-charge. |
| 115 | All as above but cable of size 3 core 2.5sq.mm |
| 116 | All as above but cable of size 12 core 2.5sq.mm |
| 117 | M&L for 1.1 KV grade copper conductor, XLPE insulated armoured cable of size 3 core 35sq.mm, conforming to IS 7098-1:1988, having stranded copper compact shaped conductors as per CI.2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanized steel strip/wire and PVC type ST-2 outer sheath confirming to IS 5831: 1984 including necessary clamping/ dressing with cable ties and termination complete all as specified and directed by Engineer-in-Charge. |
| 118 | All as above but cable of size 3 core 6 sq.mm |
| 119 | S&F signages of different sizes made out of 3 mm thick opaque PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board, in 12.5 mm block letters in red and white background, properly spaced to provide good legibility,squarely attached to the wall or partition in such a way that the top of the sign is not above 2 m from the finished floor level, fixed with mirror fasteners as specified and directed by the Engineer-in-Charge. |
| 120 | Material and labour for construction of valve chambers of internal size 900x900x1200 mm depth including excavation and earthwork. PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate, 150 mm thick & 150 mm wide offsets around over 100 mm thick hardcore, 200 mm thick PCC block masonry walls built in CM 1:4, 100 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/dense soil 6 mm thick MS sheet cover fixed on 25 mm X 25 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed. |
| 121 | Schedule \"A\" Part - XV: Manning & Operation and Comprehensive maintenance of lifts |
| 122 | Outsourcing of services for operation of the following Electrically operated Lifts installed in 3 buildings by deploying 2 operators (Semi skilled) in general shift of 8 hours per day+ 01 rescue operator (Semi skilled) during night shift of 08 hours complete during 1st year of Defect Liability Period:(i) 01 lift of 8 passenger (544 kg) capacity & 01 lift of 13 passenger (884 kg) capacity in one buildings consisting Stilt + 9 upper floors (Total 2 lifts)(ii) 01 lift of 8 passenger (544 kg) capacity & 01 lift of 13 passenger (884 kg) capacity each in one buildings consisting Stilt + 7 upper floors (Total 2 lifts)(iii) 01 lift of 8 passenger (544 kg) capacity & 01 lift of 13 passenger (884 kg) capacity each in one buildings consisting Stilt + 7 upper floors (Total 2 lifts) |
| 123 | All as per Item No. 78 herein before but during 2nd year of Defect Liability Period. |
| 124 | All as per Item No. 78 herein before but during 1st year after expiry of Defect Liability Period. |
| 125 | All as per Item No. 78 herein before but during 2nd year after expiry of Defect Liability Period. |
| 126 | All as per Item No. 78 herein before but during 3rd year after expiry of Defect Liability Period. |
| 127 | Comprehensive maintenance including periodical maintenance of electrically operated passengerslifts catered under Item No. 40.00 to 43.00herein before,during 1st year after Defect Liability Period as per OEM recommendation, repairs/ rectification of defects including renewal/ replacement of all defective partsthrough respective OEM of the lifts complete all as specified and as directed.(Total No of Lifts- 06 Nos) |
| 128 | All as per Item No. 83 herein before but during 2nd year after expiry of Defect Liability Period. |
| 129 | All as per Item No. 83 herein before but during 3rd year after expiry of Defect Liability Period. |
| 130 | Schedule \"A\" Part - XVI: Manning & Operation of STP |
| 131 | Outsourcing of services for operation of 70 KLD capacity STP catered under Item No. 37 herein before, by deploying one skilled operator in each shift with two shifts of 8 hours each per day complete during 1st year of Defect Liability Period complete including dozing of consumable chemicals/items, monitoring of all mechanical & electrical equipment, analyzing the treated water sample once in a month all as directed. |
| 132 | All as per Item No. 86 herein before but during 2nd year of Defect Liability Period. |
| 133 | Supply only Sodium hypochloride solution |