|
Repair of Electric Wiring and Rehabilitation of Forest Rest house Dow-Hill, Kurseong- Supply only the following 1.1 KV grade PVC insulated A/AI, Cable as below ([Finolex/Havells/RR/Polycab/EIC Approved] 4 core 16 sq mm 2 Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S& F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as neey, mending goods damages and painting 3 S&F compression type gland complete with brassgland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 16 sq mm. 4 Finishing of the ZLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. 4 core 16 sq mm. 5 Supplying and fixing sheet steel Main Switches on flat iron frame on wall of following ratings: 16/16 Amp 240 V DP with fuse on L & N. [Make: Havells] 6 Supplying and fixing Sheet steel Main Switches on angle iron frame on wall: 60/63 A, 415V TPN with fuse on L&N 7 Supplying and fixing double door Horizontal TPN MCB Distribution board with JP-42/43 protection concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 4 Way Enclosure (607715) with 1 No. FP 63 A Isolator; 12 Nos. (6-32)A SP MCB [Make: Legrand] 8 Supplying and fixing double door SPN MCB distribution board with IP-42/43 protection, concealed in wall after cutting the wall connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+8 way, Enclosure (607711) along with a) S&F 415V, 32 Amp DP MCB Isolator - 1 Nob) SP MCB 240V, 6Amp - 8 Nos [Make Legrand] 9 Distn. Wiring in 22/0.3 (1.5 sq mm) single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plated flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC.Average run 7 mtr. 10 Distn. Wiring in 22/0.3 (1.5 sq mm) single core stranded FR PVC insulated and unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages tooriginal finish.2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC10.1 On Board 11 Average run 6 mtr. 12 Cutting channel of 31 mm x 31 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wore fish wire incl. mending good damages to building works:13 mm dia 3 mm thick polythene pipe without earth continuity wire 13 Supplying and Drawing 1.1 KV single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making nccy, connection as required.12.01 - 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC. [for 16/20A Plug points] 14 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC, [HTPN DB to SPNDB 15 Supply & fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16S Modular type switch, without plug top on 4 Module GI Modular rype switch board with top cover plate flushed in wall incl. s&F switch board and cover plate and making necy. connection with PVC Cu wire and earth continuity wire etc. 16 Supply and Delivery of 4 feet, 240Vm 20 W integrated type single LED tube fitting [Make - Havells/Phillips] 17 Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceilling by screws etc. 18 Supply & Delivery of 220V, Single Phase, 50 Hz A.C. heavy duty exhaust fan of Sweep Size - 230 mm (9) & Wattage < 40 Watt with complete metal body. (Make- Usha/Orient) 19 Fixing only exhaust fan of 230mm diameter after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. Length of PVC insulated wire and making connection including S&F GI louver shutter on wall with necy. bolts & nuts (6 mmdia x 62 mm long) 20 Supply & Delivery of minimum 10-12 Watt LED Bulkhead light fittings complete with all accessories having die cast aluminium housing finished I premium white powder coating. [Make-Havells/Philips] 21 Fixing only bulk head ceiling fitting on wall / ceiling by screws etc. 22 Supply and fixing of Decorative Wall Mount Single Arm Light fitting incl S&F of 1 nos. CDL 12W b22/E-27 type LED Bulb including necy connections. (Make- PHILIPS 31425 MUZIRIS 1 HEAD WALL LIGHT PH1306 of as per the choice of EIC) 23 Supply & Delivery of 240V, 50W LED flood lights with optic lens and polycarbonate diffuser in white powder coated pressure die cast aluminium housing with IP 66 protection. [Make- Philips/Havells] 24 Fixing only Floodlight fittings on top of masonary structue by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm NS flat support/or by other means as required 25 Excavation of soil for installation of Eargh Electrode and filling & ramming. For Morrum Soil 26 Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. Long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. Long) to be filled with bitumen partly under the ground level and partly above ground level drivers to an average depth of 3.65 Mts. below the ground level as below By TATA-Medium GI pipe. 27 S/G earth busbar of galvanized (hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. 28 Connecting the equipments body to earth busbar including S&F 25 mm x 6 mm galvanise (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. 29 Add SGST @ 9% 30 Add CGST @ 9% 31 Labour cess @ 1% 32 Contigency @ 3%
|