|
Centralized Rate Contract For Two (02) Years Of Spares Of Sam Turbo Make Pumps Installed In Ash Handling Plant Of Dvc , Impeller With Screw & Hub Cap : Part No : -18 & 38, 58 : Material: - Nihard Type Iv (550 Bhn) / 24% Chromium Ci (550 Bhn) , Fasteners Set (Total Quantity Of Fasteners Applicable For One Bare Ba Overflow Transfer Pump, Model : Arl 200/410 ) : Part No : -Na : Material: - Ms / Hts , Lock Washer (P.End) : Part No : -63 : Material: - Is 1363 Ms , Piston Ring : Part No : -51 : Material: - Is 210 Fg 200 , Key (Coupling) : Part No : -32 : Material: - Bs 970 En 8 , Laybrinth (Drive End) : Part No : -24 C : Material: - Astm A 216 Gr Wcb , Couplingset [Od 280 Mm] : Part No : -Na : Material: - Is 210 Fg 200 , Base With Top Cover : Part No : -1 & 2 : Material: - Is 210 Fg 200 , Volute Casing : Part No : -17 : Material: - Nihard Type Iv (550 Bhn) / 24% Chromium Ci (550 Bhn) , Lock Nut (P.End) : Part No : -60 : Material: - Is 2062 C 15 , Grease Nipple : Part No : -48 : Material: - Steel , Lock Washer : Part No : -47 A : Material: - Is 1363 Ms , Check Nut : Part No : -47 : Material: - Astm A 216 Gr.Wcb , Key (Shaft Sleeve / Impeller) : Part No : -31 : Material: - Aisi 304 , Bracket Side Cover : Part No : -25 : Material: - Astm A 216 Gr Wcb , Laybrinth (Pump End) : Part No : -24 : Material: - Astm A 743 Cf8 , Shaft Sleeve : Part No : -12 : Material: - Aisi 410 (H) , Gland : Part No : -10 : Material: - Astm A 216 Gr.Wcb , Grease Retainer : Part No : -7 : Material: - Is 210 Fg 200 , Wear Plate (B.Side) : Part No : -16 : Material: - Nihard Type Iv (550 Bhn) / 24% Chromium Ci (550 Bhn) , Pump Shaft With Keys : Part No : -4 : Material: - Bs 970 En 8 , Lantern Ring : Part No : -13 : Material: - Aisi 410 , Gland Housing : Part No : -9 : Material: - Alloy Ci (290 - 320 Bhn) , End Cover : Part No : -5 : Material: - Is 210 Fg 200 , Ba Overflow Transfer Pump Complete Without Motor, Model-Arl 200/410, Earlier Pump Sl.No.-16804-16805, Head:20Mwc, Capacity: 320 Cubic Meter/Hr., Size:200X200. , O Ring Set (1 Set=8Nos.), For Ba Overflow Transfer Pp, Model Of Pump-Arl 200/410 , Shaft Sleeve: Part No : 53.6: Material : Aisi 410 , Impeller With Nut & Helicoil Insert: Part No : 24.2: Material : Is 318 Gr.I , Bearing Housing Lantern : Part No : 35.6: Material : Is 210 Fg 200 , Bearing Bed: Part No : 36.7: Material : Is 210 Fg 200 , Bearing Cap(Outer): Part No : 37.2: Material : Is 210 Fg 200 , Bearing Cap(Inner): Part No : 37.3: Material : Is 210 Fg 200 , Oil Seal Set (1Set = 2 Nos): Part No : 43.13 & 43.3: Material : Syn. Rubber , Impeller Nut With Helicoil Insert: Part No : 93.4 & 94.21: Material : Aisi-316 , Wear Ring (Casing): Part No : 51.4: Material : Is 318 Gr.Ii , Wear Ring (Casing Cover): Part No : 51.23: Material : Is 318 Gr.Ii , Key(Coupling): Part No : 95.2: Material : Bs 970 En8 , Circlip: Part No : 94.23: Material : Spring Steel , Grooved Nut & Lock Washer: Part No : 93.3 & 94.03: Material : Sae 1018/1020Is 513 Crca Sheet , Gland: Part No : 46.4: Material : Is 210 Fg 260 , Pressure Ring: Part No : 46.9: Material : Aisi 410 , Lantern Ring: Part No : 46.10: Material : Aisi 410 , Gland Packing Set (1Set = 4 Nos): Part No : 47.3: Material : Tiga , Fastners Set [Total Quantity Of Fastners Applicable For One Bare Ash Conditioner Water Pump, Model : Cpc 80/400 ]: Part No : Na: Material : Ss , Key(Impeller): Part No : 95.03: Material : Aisi-316 , Key (Sleeve): Part No : Na: Material : Aisi-316 , Gasket Set (1Set = 4 Nos): Part No : Na: Material : Caf-9/ Paper Oil Resist , Volute Casing: Part No : 11.4: Material : Is 210 Fg 260 , Pump Shaft With Keys: Part No : 22.3: Material : Bs 970 En8 , Disc (Impeller) : Part No:550 : Material:-Ansi-316 , Gland : Part No:452 : Material:-Astm A 743 Gr.Wcb , Lantern Ring : Part No:458 : Material:-Aisi 410 , Key (Impeller / Shaft) : Part No:940.01 : Material:-Aisi 316 , Lock Washer : Part No:931 : Material:-Sae 1018/1020 , Bearing Cover (N.D.E) : Part No:360.01 : Material:-Astm A 216 Gr Wcb , Bearing Cover (D.E) : Part No:360.02 : Material:-Astm A 216 Gr Wcb , Shaft Sleeve : Part No:524 : Material:-Aisi 410 , Support Foot : Part No:183 : Material:-Ms , Impeller Wear Ring : Part No:503.01 : Material:-Astm A 743 Ca40 , Casing Wear Ring : Part No:502.01 : Material:-Astm A 743 Ca40 , Gasket (Casing / C.Cover) : Part No:411.01 : Material:-Metallic Spiral Wounded , Hex Screw (Brg. Bkt / Brg. Cover) : Part No:901 B : Material:-High Tensile Steel , Key (Coupling) : Part No:940.02 : Material:-Bs 970 En8 , Constant Oil Leveler : Part No:65.23 : Material:-Aluminium & Plastic , Breather : Part No:673 : Material:-Bs 970 En8 , Screw Plug (Oil Drain) : Part No:903 : Material:-Steel , Screw Plug (Casingdrain) : Part No:916 : Material:-Aisi 316 , Lock Nut Hex Screw (Casing / C.Cover) : Part No:923 : Material:-Is 513 Crca Sheet , Casing Cover : Part No:161.01 : Material:-Astm A 743 Gr.Wcb , Stuffing Box Bush : Part No:456 : Material:-Ansi-316 , Volute Casing : Part No:102.01 : Material:-Astm A 743 Gr.Wcb , Impeller : Part No:230 : Material:-Astm A 743 Ca40 , Thrower : Part No:507 : Material:-Aisi 316 , Pump Shaft With Keys : Part No:211 : Material:-Bs 970 En8 , Oil Seal Set Part No:73.02 Forhp Water Pump , Coupling Set (Bc-6A) : Part No:Na : Material:-Is 210 Fg 200 , Bearing Bracket : Part No:330.01 : Material:-Astm A 216 Gr Wcb , Inner Casing: Part No: 17: Material: - Nihard Type Iv (550 Bhn) / Chromium Ci (550 Bhn) , Gland Packing Set (1 Set = 10 Nos): Part No: 56: Material: - Tiga , Motor Pulley(326-88-Sc3): Part No: Na: Material: - Is 210 Fg 200 , O Ring Set [1 Se = 14 Nos]: Part No: Na: Material: - Neo Rubber , Gasket Set [1 Set = 5 Nos]: Part No: Na: Material: - Caf 9 , Pump Shaft With Keys: Part No: 4: Material: - Bs 970 En 8 , Doom Nut & T. Bolt Set [1 Set Consists Of Doom Nut = 2 Nos T Bolt = 2 Nos]: Part : 33 & 34: Material:Bs 970 En 8 , Key (Coupling / Pulley): Part No: 32: Material: - Bs 970 En 8 , Wear Plate ( B.Side): Part No: 16: Material: - Nihard Type Iv (550 Bhn) / Chromium Ci (550 Bhn) , Key (Expeller): Part No: 31: Material: - Aisi 304 , Oil Seal Set (1 Set = 3 Nos): Part No: 51: Material: - Syn Rubber , Lock Nut: Part No: 47: Material: - Astm A 216 Gr.Wcb , Outer Casing Set (1 Set = 2 Nos): Part No: 15 & 20: Material: - Astm A 216 Gr.Wcb , Bearing Housing Set: Part No: 3: Material: - Is 210 Fg 200 , Lock Washer: Part No: 48: Material: - Ms , Bracket Side Cover: Part No: 25: Material: - Astm A 216 Gr.Wcb , Suction Side Cover: Part No: 21: Material: - Astm A 216 Gr.Wcb , Flange (Suction Cover): Part No: 70: Material: - Nihard Type Iv (550 Bhn) / Chromium Ci (550 Bhn) , Impeller With Nut: Part No: 18 & 38: Material: - Nihard Type Iv (550 Bhn) / Chromium Ci (550 Bhn) , Expeller: Part No: 14: Material: - Nihard Type Iv (550 Bhn) / Chromium Ci (550 Bhn) , Liquid Thrower: Part No: 11: Material: - Astm A 216 Gr.Wcb , Outer Bearing Cap: Part No: 5: Material: - Is 210 Fg 200 , Bearing Bed With Top Cover: Part No: 1 & 2: Material: - Is 210 Fg 200 , Shaft Sleeve: Part No: 12: Material: - Astm A 743 Cc 50 , Fasteners Set (Total Quantityof Fasteners Applicable For One Bare Ash Slurry Pump : Model : Ar 200/550 ): Part No: Na: Material: - Hts / Ms , Pump Pulley(696-88-Sc3): Part No: Na: Material: - Is 210 Fg 200 , Spring Set (1 Set = 3 Nos): Part No: 41: Material: - Steel , Coupling (Ph 218/180): Part No: - Na: Material: -Is 210 Fg 200 , O Ring Set (1Set = 5 Nos) : Part No: - Na: Material: -Neo - Rubber , Throttle Bush: Part No: - 46.8: Material: -Aisi 410 , Gland Packing Set (1 Set = 5 Rings): Part No: - 47.3: Material: -Tiga , Lantern Ring: Part No: - 46.10: Material: -Aisi 410 , Gasket Set (1Set = 4 Nos) : Part No: - Na: Material: -Superlite 5000 /Teflon , Shaft Sleeve: Part No: - 53.6: Material: -Aisi 410 , Key (Impeller): Part No: - 95.03: Material: -Aisi 316 , Bearing Bed: Part No: - 36.7: Material: -Is 210 Fg 200 , Gland [1 No = 2 Halves]: Part No: - 46.4: Material: -Alloy Ci , Volute Casing: Part No: - 11.4: Material: -Is 210 Fg 260 , Oil Seal Set [1 Set = 2 Nos]: Part No: - 43.3 & 43.13: Material: -Syn Rubber , Support Foot: Part No: - 19.5: Material: -Is 2062 E250 Gr.B , Dismantling Sleeve: Part No: - 53.2: Material: -Bs 970 En8 , Lock Washer: Part No: - 94.3: Material: -Is 513 Crca Sheet , Bearing Cap (Inner): Part No: - 37.3: Material: -Is 210 Fg 200 , Bearing Cap (Outer): Part No: - 37.2: Material: -Is 210 Fg 200 , Pump Shaft With Keys: Part No: - 22.3: Material: -Bs 970 En 8 , Impeller With Lock Screw & Lock Washer: Part No: - 24.2: Material: -Is 318 Gr. I , Casing Cover: Part No: - 17.3: Material: -Is 210 Fg 260 , Wear Plate: Part No: - 14.7: Material: -Is 318 Gr. I , Key (Coupling ): Part No: - 95.2: Material: -Bs 970 En8 , Oil Flinger: Part No: - 56.3: Material: -Is 226 C15 , Deflector: Part No: - 51.9: Material: -Aisi - 304 , Circlip: Part No: - 94.4: Material: -Spring Steel , Lock Nut: Part No: - 93.5: Material: -Sae 1018/1020 , Support Sleeve: Part No: - 53.7: Material: -Is 210 Fg 200 , Seal Water Pump Complete Without Motor , Model:Tps 100/500(5Vo), (Earlier Pump Sl.No.-26012,26013) , Gland Packing (1 Set = 4 Nos) : Part No: - 47.3 :Material : -Tiga , Lantern Ring : Part No: - 46.10 :Material : -Aisi 410 , Gland : Part No: - 46.4 :Material : -Is 210 Fg 260 , Vent : Part No: - 68.4 :Material : -Plastic , Oil Level Sight Glass : Part No: - 65.4 :Material : -Aluminium / Acry Glass , Bearing Cap (Inner & Outer) : Part No: - 37.2 :Material : -Is 210 Fg 200 , Bearing Bed : Part No: - 34.2 :Material : -Is 210 Fg 200 , Volute Casing : Part No: - 11.4 :Material : -Is 210 Fg 260 , Coupling (L226) : Part No: - Na :Material : -Is 210 Fg 200 , Gasket Set [1 Set = 4 Nos] : Part No: - Na :Material : -Caf / Teflon , Deflector : Part No: - 51.9 :Material : -Plastic , Key (Coupling) : Part No: - 95.2 :Material : -Bs 970 En8 , Key (Impeller) : Part No: - 95.03 :Material : -Aisi 316 , Shaft Sleeve : Part No: - 53.6 :Material : -Aisi 410 , Casing Cover : Part No: - 17.3 :Material : -Is 210 Fg 260 , Wear Ring (Casing Cover) : Part No: - 51.23 :Material : -Astm A 743 Ca40 (Ss) , Wear Ring (Casing) : Part No: - 51.4 :Material : -Astm A 743 Ca40 (Ss) , Oil Seal Set (1 Set = 2 Nos) : Part No: - 43.3, 43.13 :Material : -Syn. Rubber , Impeller With Hex Nut : Part No: - 24.2 :Material : -Astm A 743 Ca40 (Ss) , Pump Shaft With Keys : Part No: - 22.3 :Material : -Bs 970 En8 , Lp Seal Water Pump Complete Without Motor : Model: Wp 150/320 : Earlier Pump Serial No. 30612-30613 , Fasteners Set (Total Quantity Of Fasteners Applicable For One Lp Seal Water Pump, Model: Wp 150/320 ) : Part No: - Na :Material : -Ms , Wear Ring: Part No: -51.4: Material: - Astm A 743 Ca40 , Sealing Washer, Part No.42.13,42.14&42.17, Model:5 Md 80/205 , Flat Gasket, Part No.41.03&41.2, Model:5 Md 80/205 , Lock Washer, Part No. 94.2, Model:5 Md 80/205 , Complete Pump Assembly Of Economizer Water Pump, Model: 5 Md 80/205 , Couplingset (Od = 180 Mm): Part No: ---: Material: - Is 210 Fg 200 , Key (Coupling): Part No: -95.2: Material: - Bs 970 En 8 , Key (Impeller): Part No: -95.03: Material: - Bs 970 En 8 , Gland : Part No: -46.4: Material: - Is 210 Fg 260 , Balancing Disc: Part No: -61.3: Material: - Aisi 420 , Cylindrical Pin Set (1 Set = 5 Nos): Part No: -57.4: Material: - Aisi 316 , Sleeve (Suction Side): Part No: -55.4: Material: - Aisi 410 , Shaft Sleeve: Part No: -53.6: Material: - Aisi 410 , Spacer: Part No: -53.7: Material: - Aisi 410 , Gland Packing (1 Set = 10 Nos): Part No: -47.3: Material: - Tiga , Stuffing Box Housing : Part No: -46.3: Material: - Is 210 Fg 260 , Bearing Cap (Inner): Part No: -37.3: Material: - Is 210 Fg 200 , Bearing Housing: Part No: -36.2: Material: - Is 210 Fg 200 , Lantern Ring: Part No: -46.10: Material: - Bs 970 En 8 , Delivery Casing: Part No: -11.9: Material: - Is 210 Fg 260 , Pump Shaft With Keys: Part No: -22.3: Material: - Bs 970 En 8 , Stage Casing: Part No: -11.10: Material: - Is 210 Fg 260 , Fasteners Set [Total Quantity Of Fasteners Applicbale For One Bare Economiser Water Pump, Model :5 Md 80/205 ]: Part No: ---: Material: - Ms , Gasket Set (1 Set = 3 Nos): Part No: ---: Material: - Caf-9 , Key (Balancing Disc): Part No: -95.04: Material: - Bs 970 En 8 , Tie Bolt Set [1 Set = 8 Nos]: Part No: -91.7: Material: - Bs 970 En19 , Balancing Disc Seat: Part No: -61.4: Material: - Alloy Ci , Lock Nut & Lock Washer: Part No: -93.3 & 94.2: Material: - Sae 1018/1020 / Is 513 Crca Sheet , Shaft Sleeve: Part No: -53.43: Material: - Aisi 410 , O Ring Set (1 Set = 9 Nos): Part No: -42.4, 42.23, 42.24: Material: - Neoprene Rubber , Spacer: Part No: -53.5: Material: - Aisi 410 , Suction Casing : Part No: -11.8: Material: - Is 210 Fg 260 , Bearing Cap (Outer): Part No: -37.2: Material: - Is 210 Fg 200 , Lock Nut And Lock Washer,Part No.-93.3 & 94.2 , For Economizer Water Pump, Pump Model No.-5 Md 80/205 , Pump Shaft Part No. 22.3 , Impeller: Part No: -24.2: Material: - Astm A 743 Ca40 , Economiser Water Pump Complete Without Motor, Model: 5Md 80/205, (Earlier Pump Sl.No.-16806, 16807) , Gland Housing: Part No : 46.3: Material: -Is 210 Fg 200 , Coupling Set (Dia 220): Part No : Na: Material: -Is 210 Fg 200 , Key (Coupling): Part No : Na: Material: -Aisi 410 , Key (Impeller): Part No : Na: Material: -Aisi 316 , Bearing Housing (Bottom): Part No : 36.053: Material: -Is 210 Fg 200 , Lubrication Pipe Line: Part No : Na: Material: -Ms/ Aisi-304 , Bush Housing: Part No : 17.3: Material: -Alloy Ci (350 Bhn) , Volute Casing: Part No : 11.4: Material: -Alloy Ci (350 Bhn) , Shaft Sleeve (P. End): Part No : 53.5: Material: -Aisi 410 (H)(400 Bhn) , Delivery Pipe Assy: Part No : 72.052: Material: -Astm A 106 Gr.B , Oil Seal: Part No : 92.152: Material: -Syn Rubber , Laybrinth: Part No : 55.553: Material: -Alloy Ci , Single Shaft With Keys: Part No : 22.352: Material: -Aisi-410 , Lantern Ring: Part No : 46.1: Material: -Bs 970 En8 , Bearing Cap (Bottom): Part No : 37.053: Material: -Is 210 Fg 200 , Gland: Part No : 46.4: Material: -Is 210 Fg 200 , Gasket Set (1 Set = 7Nos): Part No : Na: Material: -Teflon / Superlite 5000 , Key (Sleeve): Part No : Na: Material: -Aisi 316 , O Ring : Part No : Na: Material: -Neo. Rubber , Bearing Housing (Top): Part No : 36.052: Material: -Is 210 Fg 200 , Impeller With Nut & Helicoil Insert: Part No : 24.2 & 93.4: Material: -Alloy Ci (350 Bhn) , Strainer: Part No : 63.03: Material: -Is 1239 Part I Heavy , Single Column Pipe: Part No : 72.352: Material: -Astm A 106 Gr.B , Gland Ring: Part No : 46.9: Material: -Is 318 Gr.Ii , Gland Packing (1Set = 5 Nos): Part No : 47.3: Material: -Ptfe , Bearing Cap (Top): Part No : 37.052: Material: -Is 210 Fg 200 , Lock Washer: Part No : 94.053: Material: -Is 2062 Ms , Lock Nut: Part No : 93.153: Material: -Bs 970 En8 , Gland, Part No.-46.4 , For Sump Drainage Pump Silo Area, Pump Model -Vo 50/260+Tch+N , Sump Drainage Pump : Model: Vg 50/260 +Tch+N : Earlier Pump Serial No. 26006-26009, Capacity:20 Meter Cube/Hr, Total Head: 20 Meter. , Fasteners Set (Total Quantity Of Fasteners Applicable For One Bare Sump Drainage Pump -Silo Area; Model : Vg 50/260 +Tch+N): Part No : Na: Material: -Hts , Oil Breather : Part No: - 26: Material: - Ms , Fasteners Set (Total Quantityof Fasteners Applicable For Ash Slurry Pump (Anti-Clockwise) Model: Ar 200/550) : Part No: - Na: Material: - Hts / Ms , Liquid Thrower: Part No: - 11: Material: - Astm A 216 Gr.Wcb , Key (Coupling) : Part No: - 32: Material: - Bs 970 En 8 , Key (Expeller) : Part No: - 31: Material: - Aisi 304 , Oil Seal Set [1 Set = 3 Nos] : Part No: - 51: Material: - Syn Rubber , Lock Washer : Part No: - 48: Material: - Ms , Lock Nut : Part No: - 47: Material: - Astm A 216 Gr.Wcb , Bracket Side Cover : Part No: - 25: Material: - Astm A 216 Gr.Wcb , Gland Ring : Part No: - 24: Material: - Astm A 216 Gr.Wcb , Bearing Housing Set : Part No: - 3: Material: - Is 210 Fg 200 , Split Gland: Part No: - 10: Material: - Astm A 216 Gr.Wcb , Wear Plate ( S.Side) : Part No: - 19: Material: - Astm A 532 Class Iii Type A Hichrome /Nihard Type Iv (550 Bhn) , Impeller With Nut : Part No: - 18 & 38: Material: - Astm A 532 Class Iii Type A Hichrome / Nihard Type Iv (550 Bhn) , Wear Plate ( B.Side) : Part No: - 16: Material: - Astm A 532 Class Iii Type A Hichrome /Nihard Type Iv (550 Bhn) , Suction Cover : Part No: - 21: Material: - Astm A 216 Gr.Wcb , Flange (Suction Cover) : Part No: - 70: Material: - Astm A 532 Class Iii Type A Hichrome /Nihard Type Iv (550 Bhn) , Inner Casing : Part No: - 17: Material: - Astm A 532 Class Iii Type A Hichrome /Nihard Type Iv (550 Bhn) , Expeller : Part No: - 14: Material: - Astm A 532 Class Iii Type A Hichrome / Nihard Type Iv (550 Bhn) , Bearing Bed With Top Cover : Part No: - 1 & 2: Material: - Is 210 Fg 200 , Gland Housing : Part No: - 9: Material: - Alloy Ci , Bearing Spacer : Part : 7: Material:Is 210 Fg 200 , Inner Bearing Cap : Part No:- 6 :Material: - Is 210 Fg 200 , Coupling Set ( Dia 330) : Part No: - Na: Material: - Is 210 Fg 200 , Shaft Sleeve: Part No : - 53.43: Material: - Ss 316 , Sam Turbo Make Centrifugal Pump ; Description Of Pump : Hp Seal Water Pump: Model: 8 Md 80/205D , Key (Coupling): Part No:- 95.2: Material: - Bs 970 En 8 , Coupling (Od = 180 Mm): Part No:- Na: Material: - Is 210 Fg 200 , Gasket Set (1 Set = 3 Nos): Part No:- Na: Material: - Caf 9 , Key (Impeller): Part No:- 95.03: Material: - Aisi 316 , Tie Bolt Set [1 Set = 8 Nos]: Part No:- 91.7: Material: - Bs 970 En19 , Bearing Cap (Outer): Part No : - 37.2: Material: - Is 210 Fg 200 , Key (Balancing Disc): Part No:- 95.04: Material: - Bs 970 En 8 , Balancing Disc Seat: Part No : - 61.4: Material: - Astm A 216 Gr. Wcb , Spacer: Part No : - 53.5: Material: - Aisi 410 , Lock Nut : Part No : - 93.3: Material: - Is 1363 Ms , Shaft Sleeve: Part No : - 53.6: Material: - Ss 316 , Wear Ring: Part No : - 51.4: Material: - Astm A 351 Cf8m , Gland [1 No = 2 Halves]: Part No : - 46.4: Material: - Astm A 216 Gr. Wcb , Lantern Ring: Part No : - 46.10: Material: - Aisi 410 , Felt Seal(1 Set = 3 Nos): Part No : - 43.23,43.4: Material: - Felt , Pump Shaft With Keys: Part No : - 22.3: Material: - Aisi 410 , Bearing Cap (Inner): Part No : - 37.3: Material: - Is 210 Fg 200 , Bearing Housing: Part No : - 36.2: Material: - Is 210 Fg 200 , Impeller: Part No : - 24.2: Material: - Astm A 351 Cf8m , Spacer: Part No : - 53.7: Material: - Aisi 410 , Stage Casing: Part No : - 11.10: Material: - Astm A 216 Gr. Wcb , Delivery Casing: Part No : - 11.9: Material: - Astm A 216 Gr. Wcb , Suction Casing : Part No : - 11.8: Material: - Astm A 216 Gr. Wcb , Balancing Disc: Part No : - 61.3: Material: - Aisi 420 , Cylindrical Pin Set [1 Set = 8 Nos]: Part No : - 57.4: Material: - Aisi 316 , Lock Washer: Part No : - 94.2: Material: - Is 1363 Ms , Sleeve (Suction Side): Part No : - 55.4: Material: - Ss 316 , Diffuser: Part No : - 18.3: Material: - Astm A 216 Gr. Wcb , Stuffing Box Housing : Part No : - 46.3: Material: - Astm A 216 Gr. Wcb , Wearing Rings For Hp Seal Water Pump(8Md80/205) , Hp Seal Water Pump(Without Motor), Model Of Pump: 8 Md 80/205 , Balancing Disc: Material: - Aisi 420 : Part No : 61.3 , Stage Casing; Part No.11.1 (Spares For Pump Model 7Md 100/250) , Pump Shaft; With Keys Part No.22.3 (Spares For Pump Model 7Md 100/250) , Throttle Bush; Part No- 55.23, Material-Is 210 Fg 200 Of Water Pumpmodel:-7Md 100/250 , Shaft Sleeve;Part No. 53.6, Spare Parts For Water Pump Type/Model No.:- 7 Md 100/250. , Wear Ring; Part No. 51.4( Spare Parts For Water Pump Of Stock Pile Ds System) Type/Model No.:- 7 Md 100/250.) , Fastener Set (Total Quantity Of Fastener Applicable For One Bare Pump Only) , Material-Ms, (Of Water Pump (Stock Pile Ds System) Model:-7Md 100/250) , Lantern Ring: Material: - Bs 970 En8 : Part No : 46.1 , Stuffing Box Housing; Part No.46.3 (Spares For Pump Model 7Md 100/250) , Impeller;Part No. 24.2, Spare Parts For Water Pump Type/Model No.:- 7 Md 100/250. , Bearing Housing; Part No. 36.2 (Spares For Pump Model 7Md 100/250) , Sleeve (Suction Side): Material: - Aisi 316 : Part No : 55.4 , Balancing Disc Seat, Part No-61.4, Material-Aisi 420, (Of Water Pump (Stock Pile Ds System) Model:-7Md 100/250) , Diffuser Set,(01 Set= 07Nos.), Part No-18.3, Material-Is 210 Fg 200, (Of Water Pump (Stock Pile Ds System) Model:-7Md 100/250) , Delivery Casing; Part No.11.9 (Spares For Pump Model 7Md 100/250) , Sleeve (Suc Side) Part No. 55.4, Spare Parts For Water Pump Type/Model No.:- 7 Md 100/250. , Sleeve (Del Side) Part No. 55.24, Spare Parts For Water Pump Type/Model No.:- 7 Md 100/250. , Shaft Sleeve;Part No. 53.43, Spare Parts For Water Pump Type/Model No.:- 7 Md 100/250. , Suction Casing; Part No.11.8 (Spares For Pump Model 7Md 100/250) , Felt Seal Set: Material: - Felt : Part No : 43.23,43.4 , Key (Impeller); Part No. 95.03, Spare Parts For Water Pump Type/Model No.:- 7 Md 100/250. , Gland [1 No=2 Halves] Part No. 46.4 For Water Pump Type/Model No.:- 7 Md 100/250.) , Sleeve (Delivery Side): Material: - Aisi 316 : Part No : 55.24 , Gland Packingpart No. 47.3(D. Spare Parts For Water Pump Of Stock Pile Ds System) Type/Model No.:- 7 Md 100/250.) , Coupling Set (Dia 220): Material: - Is 210 Fg 200 : Part No : -- , Fasteners Set[Total Quantity Of Fasteners Applicable For One Bare Pump]: Material: - Ss : Part No : -- , Key (Balancing Disc): Material: - Bs 970 En8 : Part No : 95.04 , Key (Impeller): Material: - Aisi 316 : Part No : 95.03 , Tie Bolt : Material: - Bs 970 En 19 : Part No : 91.7 , ORing Set (1Set = 13 Nos)[Rubber Cord Joint]: Material: - Neo -Rubber : Part No : 42.4, 42.23, 42.24 & 42.25 , Balancing Disc Seat: Material: - Astm A 216 Gr.Wcb : Part No : 61.4 , Spacer: Material: - Aisi 410 : Part No : 53.4 , Throttle Bush: Material: - Astm A 216 Gr.Wcb : Part No : 55.23 , Shaft Sleeve: Material: - Aisi 316 : Part No : 53.6 , Shaft Sleeve: Material: - Aisi 316 : Part No : 53.43 , Spacer: Material: - Aisi 410 : Part No : 53.7 , Spacer: Material: - Aisi 410 : Part No : 53.3 , Lock Nut & Lock Washer: Material: - Bs 970 En8 / Ms : Part No : -- , Cylinrical Pin Set: Material: - Aisi 316 : Part No : 57.4 , Key (Coupling): Material: - Bs 970 En8 : Part No : 95.2 , Bearing Cap (Inner): Material: - Is 210 Fg 200 : Part No : 37.3 , Gland [1 No=2 Halves]: Material: - Astm A 216 Gr.Wcb : Part No : 46.4 , Wearing Rings For Lp Seal Water Pump(7Md100/250) , Lp Seal Water Pump (Without Motor), Model Of Pump: 7 Md 100/250 Centrifugal Pump Pump Description: Lp Seal Water Pump , Bearing Cap (Inner); Part No.37.3 (Spares For Pump Model 7Md 100/250) , Bearing Cap (Outer); Part No.37.2 (Spares For Pump Model 7Md 100/250) , Gland [1 No = 2 Halves]: Part No: 452: Material: Astm A 216 Gr. Wcb , Coupling Set (L 2955): Part No: Na: Material: Is 210 Fg 200 , Impeller: Part No: 234: Material: Astm A 351 Cf8m , Key (Impeller): Part No: 940.01: Material: Aisi 410 , Sleeve Nut : Part No: 921: Material: Aisi-410 , Breather: Part No: 673: Material: Bs 970 En-8 , Oil Ring Set (1 Set = 2 Nos): Part No: 644: Material: Is 318 Gr.Ltb Ii , Spacer Sleeve: Part No: 524.01: Material: Aisi 410 , Fasteners [Total Quanity Of Fasteners Applicable For One Bare Pump]: Part No: Na: Material: Ss , Key (Coupling): Part No: 940.02: Material: Aisi 410 , Bearing Nut: Part No: 923: Material: Bs 970 En-8 , Oil Sleeve: Part No: 652: Material: Aisi 410 , Pump Shaft With Keys: Part No: 211: Material: Aisi 410 , Constant Level Oiler : Part No: 638: Material: Plastic , Bearing Spacer: Part No: 551: Material: Aisi 410 , Thrower : Part No: 507: Material: Bs 970 En-8 , Casing Wear Ring : Part No: 502: Material: Astm A 351 Cf8m , Bearing Cover Inner: Part No: 360.02: Material: Astm A 216 Gr. Wcb , Lantern Ring : Part No: 458: Material: Aisi 410 , Bearing End Cover: Part No: 361: Material: Astm A 216 Gr. Wcb , Bearing Cover Outer: Part No: 360.01: Material: Astm A 216 Gr. Wcb , Bearing Housing : Part No: 350: Material: Is 210 Fg 200 , Impeller For Hp Ash Water Pump(Zm Ii 530/02) , Wearing Ring For Hp Ash Water Pump(Zm Ii 530/02) , Shaftwith Keys: Part No: - 4 : Material : - Bs 970 En 24 , Pump Pulley (220-63-Sb3): Part No: - Na : Material : - Is 210 Fg 200 , Breather Plug: Part No: - 26 : Material : - Bs 970 En 8 , Key (Coupling): Part No: - 32 : Material : - Bs 970 En 8 , Outer Casing Set: Part No: - 15 & 20 : Material : - Is 210 Fg 260 , Motor Pulley (148-63-Sb3): Part No: - Na : Material : - Is 210 Fg 200 , O Ring Set (1 Set = 11 Nos) (Rubber Cord Joint): Part No: - Na : Material : - Neo. Rubber , Gasket Set (1 Set = 2 Nos): Part No: - Na : Material : - Caf 9 , Key (Sleeve): Part No: - 31 : Material : - Aisi - 304 , Lock Washer: Part No: - 48 : Material : - Is 1363 Ms , Lock Nut: Part No: - 47 : Material : - Bs 970 En 8 , Impeller With Nut & Bolt: Part No: - 18 & 30 : Material : - Ni-Hard Type Iv , Adopter (Coupling Side): Part No: - 5 : Material : - Is 210 Fg 200 , Flange (Suction Cover): Part No: - 70 : Material : - Is 210 Fg 200 , Wear Plate ( S.Side): Part : 19: Material:Astm A 532 Class Iii Type A Hichrome / Nihard Type Iv (550 Bhn) , Inner Casing : Part No: - 17 : Material : - Ni-Hard Type Iv , Gland Housing: Part No: - 9 : Material : - Alloy Ci , Laybrinth: Part No: 14: Material :Astm A 743 Ca15 , Lantern Ring : Part No: - 13 : Material : - Bs 970 En 8 , Shaft Sleeve: Part No: - 12 : Material : - Aisi 410 , Pressure Ring : Part No: - 10R : Material : - Bs 970 En 8 , Inner Bearing Cap: Part No: - 6 : Material : - Is 210 Fg 200 , Wear Plate (B Side): Part No: - 16 : Material : - Ni-Hard Type Iv , Inner Bearing Cap (Adopter): Part No: - 5A: Material : - Is 210 Fg 200 , Gland Packing (1 Set = 6 Nos): Part No: - 56 : Material : - Tiga , Gland (1No = 2 Halves): Part No: - 10 : Material : - Astm A 216 Gr.Wcb , Liquid Thrower: Part No: - 11 : Material : - Bs 970 En 8 , Emergency Lagoon Pump (Complete Without Motor), Model Of Pump: Ars 150/340 A , Make: M/S Sam Turbo , Fasteners Set (Total Quantity Of Fasteners Applicable For One Bare Pump): Part No: - Na : Material : - Ms / Hts , Bearing Bed : Part No: - 1 : Material : - Is 210 Fg 200 , Delivery Pipe Middle : Part No : - 72.052:Material : -Astm A 106 Gr.B , Drive Shaft For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Gland Housing For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Gland Packing Set (1Set = 3 Nos) For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Gland Ring For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Star Support For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Shaft Sleeve(P.End) For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Bush Bearing (Star) For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Pump Shaft With Keys : Part No : - 22.3:Material : -Aisi 316 , Bearing Housing For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Wear Plate For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Lubrication Pipe Line : Part No : - 71.752:Material : -Ms , Lubrication Pipe Line For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Delivery Pipe For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Lock Nut(Shaft) For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Volute Casing For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Bush Bearing (Pump) For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Drive Column Pipe For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Gland For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Delivery Bend For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Drive Shaft With Keys : Part No : - 22.352:Material : -Aisi 316 , Bearing Cap For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Bush Bearing (Star) : Part No : - 55.552:Material : -Cutless Rubber , Bush Housing For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Ratchet Pin Set (1 Set = 2 Nos) For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Pump Column Pipe For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Pump Shaft For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Impeller (Threaded Type) For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Ratchet Collar For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Bearing Collar For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Lock Nut (Brg. Collar) For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Lock Washer (Shaft) For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Gland Ring : Part No : - 46.9:Material : -Is 318 Gr Ii , Star Support : Part No : - 31.152:Material : -Is 210 Fg 200 , Bearing Bed For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Fasteners Set [Total Quantity Of Fasteners Applicable For One Bare Pump] : Part No : - Na:Material : -Ms / Ss 316 , Coupling Set (Od = 140Mm) : Part No : - Na:Material : -Is 210 Fg 200 , Gasket Set [1 Set = 10 Nos] : Part No : - Na:Material : -Superlite Extra , Key (Sleeve) : Part No : - Na:Material : -Aisi 316 , Key (Bearing Collar) : Part No : - Na:Material : -Aisi 316 , Grease Nipple : Part No : - Na:Material : -Steel , Wear Plate : Part No : - 14.7:Material : -Nihard Type Iv , Bush Housing : Part No : - 17.3:Material : -Alloy Ci (350 Bhn) , Shaft Sleeve(P.End) : Part No : - 53.5:Material : -Aisi-410 (H) , Vertical Drain Pump (Complete Without Motor) : Model: Vo 80/250+Ars , Gland Packing Set : Part No : - 47.3:Material : -Tiga , Line Column Pipe : Part No : - 72.353:Material : -Astm A 106 Gr.B , Lantern Ring For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Coupling Sleeve Set (1 Set Consists Of Coupling Sleeve - 1 No, Coupling Ring - 2 Nos, Coupling Nut - 2 Nos)For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Base Plate For Vertical Drain Sump Pump, Model: Vo 80/250+Ars , Delivery Bend, Part No. - 72.055, Is 210 Fg 200, Model -Vo 50/260 + Tch+N , Lock Washerfor Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Bearing Bed For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Coupling Sleeve Set (1 Set Consists Of Coupling Sleeve - 1 No, Coupling Ring - 2 Nos, Coupling Nut - 2 Nos) For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Volute Casing For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Pump Shaft For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Wear Plate For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Delivery Bend For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Gland For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Volute Casing, Part No. - 11.4, Alloy Ci (350 Bhn), Model -Vo 50/260 + Tch+N , Bearing Cap For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Coupling Set (Dia 140), Is 210 Fg 200, Model -Vo 50/260 + Tch+N , Lubrication Pipe Line For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Bush Bearing (Star) For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Pump Column Pipe For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Bush Bearing (Pump) For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Impeller (Threaded Type) For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Shaft Sleeve(P.End) For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Drive Column Pipe For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Ratchet Collar For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Delivery Pipe For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Shims, Part No. - 36.062, Is 2062 Ms, Model -Vo 50/260 + Tch+N , Base Plate, Part No. - 90.052, Is 2062 Ms, Model -Vo 50/260 + Tch+N , Lock Nut For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Star Support For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Gland Packingfor Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Gland Housing For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Circlip For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Lantern Ring For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Gland Ring For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Bearing Housing For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Gland , Part No. - 46.4, Is 210 Fg 200, Model -Vo 50/260 + Tch+N , Base Plate For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Bush Bearing (Pump), Part No. - 55.553, Cutless Rubber, Model -Vo 50/260 + Tch+N , Star Support, Part No. - 31.152, Is 210 Fg 200, Model -Vo 50/260 + Tch+N , Pump Column Pipe, Part No. - 72.354, Astm A 106 Gr. B, Model -Vo 50/260 + Tch+N , Circlip, Part No. - 94.055, Is 3075 1965, Model -Vo 50/260 + Tch+N , Coupling Sleeve Set [ 1 Set Consist Of Coupling Ring - 2 Nos., Coupling Nut - 2 Nos., Coupling Sleeve - 1 No.], Part No. - 87.053, 87.052, 87.452, Aisi 410, Model -Vo 50/260 + Tch+N , Impeller Nut, Part No. - 93.4, Aisi 316, Model -Vo 50/260 + Tch+N , Impeller, Part No. - 24.2, Alloy Ci (350 Bhn) , Model -Vo 50/260 + Tch+N , Bush Housing, Part No. - 17.3, Alloy Ci (350 Bhn) , Model -Vo 50/260 + Tch+N , Bare Pump Including Base Plate, Coupling, Column And Delivery Pipe Upto Sole Plate & Strainerwithout Motor, Model -Vo 50/260 + Tch+N , Gland Housing, Part No. - 46.3, Is 210 Fg 200, Model -Vo 50/260 + Tch+N , Lock Nut For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Bearing Collar For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Gland Packing , Part No. - 47.3, Ptfe, Model -Vo 50/260 + Tch+N , Bush Housing For Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Ratchet Pin Setfor Vertical Drain Sump Pump, Model: Vo 50/260 +Tch+N , Flange Suction Cover , Part No.70 Nihard Typeiv/Hichrome, Model- Ar 200/550 , Bracket Side Cover : Part No: - 25: Material : - Astm A 216 Gr.Wcb , Suction Cover : Part No: - 21: Material : - Astm A 216 Gr.Wcb , Impeller With Nut : Part No: - 18 & 38: Material : - Astm A 532 Class Iii Type A Hichrome / Nihard Type Iv (550 Bhn) , Inner Casing : Part No: - 17: Material : - Astm A 532 Class Iii Type A Hichrome / Nihard Type Iv (550 Bhn) , Wear Plate ( B.Side) : Part No: - 16: Material : - Astm A 532 Class Iii Type A Hichrome / Nihard Type Iv (550 Bhn) , Oil Level Indicator : Part No:- 54 :Material: - Glass With Brass Tube , Expeller : Part No: - 14: Material : - Astm A 532 Class Iii Type A Hichrome / Nihard Type Iv (550 Bhn) , Lantern Ring: Part : 13: Material:Astm A 743 Cf8m , Shaft Sleeve : Part No: - 12: Material : - Astm A 743 Ca15 , Liquid Thrower: Part No: - 11: Material : - Astm A 216 Gr.Wcb , Pump Shaft With Keys: Part : 4: Material:Bs 970 En 24 , Spring Set (1 Set = 3 Nos) : Part No:- 41 :Material: - Steel , Doom Nut & T. Bolt Set [1 Set Consists Of Doom Nut = 2 Nos T Bolt = 2 Nos] : Part No: - 33 & 34: Material : - Bs 970 En 8 , Key (Coupling) : Part No: - 32: Material : - Bs 970 En 8 , Key (Expeller) : Part No: - 31: Material : - Aisi 304 , Cover Bracket Side Sp. For Bottom Ash Slurry Pump Model Ar 150/500 For Ahp , Wearplate (S.Side), Part No. 19 , Model-Ar 150/500A , Sleeve Shaft- Sp. For Fly Ash Slurry Pump Model Ar-150/500A Part No- 12 , Glandhousing , Part No. 9 , Model-Ar 150/500A , Innerbearing Cap, Part No. 6 , Model-Ar 150/500A , Outerbearing Cap, Part No. 5 , Model-Ar 150/500A , Pump Shaft, Part No. 4 , Model-Ar 150/500A , Lock Nut, Part No. 47 , Model-Ar 150/500A , T Bolt (1 Set = 2 Nos), Part No. 34 , Model-Ar 150/500A , Doom Nut(1 Set=2 Nos), Part No. 33 , Model-Ar 150/500A , Coupling Key , Part No. 32 , Model-Ar 150/500A , Expeller Key, Part No. 31 , Model-Ar 150/500A , Casing Wear Ring, Part No-502, Model : Zm Ii 530/03 , Lantern Ring, Part No-458, Model : Zm Ii 530/03 , Gland, Part No-452, Model : Zm Ii 530/03 , Bearing End Cover (Inner), Part No-360.01, Model : Zm Ii 530/03 , Bearing End Cover (Outer), Part No-360.02, Model : Zm Ii 530/03 , Bearing End Cover, Part No-361.02, Model : Zm Ii 530/03 , Bearing Housing, Part No-350, Model : Zm Ii 530/03 , Impeller, Part No-234, Model : Zm Ii 530/03 , Pump Shaft, Part No-211, Model : Zm Ii 530/03 , Key (Impeller), Part No-940.01, Model : Zm Ii 530/03 , Bearing Lock Nut, Part No-923.02, Model : Zm Ii 530/03 , Sleeve Lock Nut, Part No-921, Model : Zm Ii 530/03 , Breather, Part No-673, Model : Zm Ii 530/03 , Oil Sleeve, Part No-652, Model : Zm Ii 530/03 , Shaft Sleeve, Part No-524, Model : Zm Ii 530/03 , Thrower, Part No-921, Model : Zm Ii 530/03 , Shaft Sleeve, Part No. 14, Model-8 Ad 11 , Shaft, Part No. 6, Model-8 Ad 11 , Complete Set Of Lp Water Pump, Model-8 Ad 11 , Adapter, Part No. 71, Model-8 Ad 11 , Bearing Cover, Part No. 35, Model-8 Ad 11 , Bearing Housing, Part No. 31, Model-8 Ad 11 , Lantern Ring, Part No. 29, Model-8 Ad 11 , Bearing Lock Nut, Part No. 22, Model-8 Ad 11 , Sleeve Nut, Part No. 20, Model-8 Ad 11 , Shaft Sleeve, Part No.53.6, Model-6 Md 80/205 , Shaft Sleeve, Part No.53.43, Model-6 Md 80/205 , Gland , Part No.46.4, Model-6 Md 80/205 , Stage Casing, Part No.11.1, Model-6 Md 80/205 , Delivery Casing, Part No.11.9, Model-6 Md 80/205 , Suction Casing , Part No.11.8, Model-6 Md 80/205 , Complete Assembly Of Hp Seal Water Pump, Model: 6 Md 80/205 , Balancing Disc Seat, Part No.61.4, Model-6 Md 80/205 , Balancing Disc, Part No.61.3, Model-6 Md 80/205 , Sleeve (Suction Side), Part No.55.4, Model-6 Md 80/205 , Bare Lp Seal Water Pump, Model-2 Md 125/305 V Only Without Accessories And Without Motor. , Balancing Disc Seat, Part No.61.4, Model-2 Md 125/305 V , Balancing Disc, Part No.61.3, Model-2 Md 125/305 V , Coupling Sleeve Set, Model-Vo 40/230 +Tch +N , Pump Shaft, Part No. 22.3, Model-Vo 40/230 +Tch +N , Drive Shaft , Part No. 22.352, Model-Vo 40/230 +Tch +N , Impeller, Part No. 24.2, Model-Vo 40/230 +Tch +N , Volute Casing , Part No. 11.4, Model-Vo 40/230 +Tch +N , Bare Ash Slurry Drain Pump Including Base Plate, Model-Vo 40/230 +Tch +N , Shaft Sleeve(P. End) , Part No. 53.5, Model-Vo 40/230 +Tch +N , Bush Bearing (Pump) , Part No. 55.553, Model-Vo 40/230 +Tch +N. , Bush Bearing, Part No. 55.552 , Model-Vo 40/230 +Tch +N , Bush Bearing (Star), Part No. - 55.552, Cutless Rubber, Model -Vo 50/260 + Tch+N , Pump Shaft, Part No. - 22.3, Aisi 410, Model -Vo 50/260 + Tch+N , Drive Shaft, Part No. - 22.352, Bs 970 En8, Model -Vo 50/260 + Tch+N , Bush Bearing (Star), Part No. 55.552) , Model-Vo 50/210 + Ars , Coupling Sleeve Set [ 1 Set Consist Of Coupling Ring - 2 Nos Coupling Nut - 2 Nos. Coupling Sleeve - 1 No.], Model-Vo 50/210 + Ars , Drive Shaft, Part No. 22.352, Model-Vo 50/210 + Ars , Gland Ring, Part No. 46.9, Model-Vo 50/210 + Ars , Lantern Ring, Part No. 46.10, Model-Vo 50/210 + Ars , Gland Housing, Part No. 46.3, Model-Vo 50/210 + Ars , Gland, Part No. 46.4, Model-Vo 50/210 + Ars , Bearing Housing, Part No. 36.052, Model-Vo 50/210 + Ars , Bearing Cap, Part No. 37.052, Model-Vo 50/210 + Ars , Bearing Collar, Part No. 53.952 , Model-Vo 50/210 + Ars , Ratchet Collar, Part No. 53.852 , Model-Vo 50/210 + Ars , Ratchet Pin, Part No. 53.752 , Model-Vo 50/210 + Ars , Lock Washer (Shaft), Part No. 94.053, Model-Vo 50/210 + Ars , Impeller , Part No. 24.2, Model-Vo 50/210 + Ars , Bare Drain Pump, Model-Vo 50/210 + Ars: Including Base Plate, Coupling, Column And Deliver Pipe,Star Support,Foundation Bolts,Strainer And Without Motor , Shaft Sleeve (Pump End) , Part No. 53.5, Model-Vo 50/210 + Ars , Strainer, Part No. 63.03, Model-Vo 50/210 + Ars , Bush Bearing (Pump), Part No. 55.553, Model-Vo 50/210 + Ars , Pump Seal Water Model:10Md-80/205 Sp For Ash Handing Plant , Impeller - Sp. For Seal-Water Pump Model: 10 Md/205 For Ahp 1Set-10Nos , Disc Seat Balancing-Sp. For Seal Water Pump Model 10Md/205 For Ahp , Disc Balancing-Sp. For Seal Water Pump Model 10Md/205 For Ahp , Spacer Part No 53.5-Sp. For Seal Water Pumpmodel:10Md/205 For Ahp , Casing Stage-Sp. For Seal Water Pump Model No.10Md/205 For Ahp , Shaft Pump Sp. For Seal Water Pump Model 10Md/205 For Ahp , Diffuser Pt.No.18.3 Model:10Md-80/205 Spares For Seal Water Pump Ahp , Key ( Balancing Disc) 95.04 Ms Sp For Sam Model 10Md/80/205 Seal Water Pump Ahp , Shaft Sleeve (L.H. Thread) Part No-53.6 Spare Forsam Make Seal Waterpump Type-10 Md 80/205 , Gland-Sp. For Seal Water Pumpmodel:10Md/205 , Shaft Sleeve (R.H. Thread) Part No-53.43 Spare Forsam Make Seal Waterpump Type-10 Md 80/205 , Spacer Pt.No.53.7 Model:10Md-80/205 Spares For Seal Water Pump Ahp , Casing Delivery -Spares For Seal Water Pump Model:10Md/205 For Ahp , Casing Suction-Spares For Seal Water Pump Model:10Md/205 For Ahp , Housing Staffing Box Sp. For Seal Water Pump Model 10Md/205 For Ahp , Ring Lantern -Spares For Waterpump Model:10Md/205 , Counter Flange-Sp. For Bottom Ash Slurry Pumpmodel:Ar-150/500 For Ahp , Cover Suction Sp. For Bottom Ash Slurry Pump Model No Ar 150/500 For Ahp Part No- 21 , End Plate, Part No. 29 , Model-Ar 150/500A , Flange (Suction Cover ), Part No. 70 , Model-Ar 150/500A , Casing Inner Sp. For Bottom Ash Slurry Pump Model Ar 150/500 For Ahp Part No- 17 , Impeller With Nut Sp. For Bottom Ash-Slurry Pump Model Ar150/500 For Ahp Part No- 18 & 38 , Liquid Thrower Pt No.11, -Spares For Bottom Ash Slurry Pump Model:Ar-150/500 -Ahp , Ring Lantern Spares For Bottom Ash Slurry Pump Model Ar -150/500 For A.H.P. Part No- 13 , Ring Gland Spares For Bottom Ash Slurry Pump Model Ar -150/500 -For A.H.P. Part No- 24 , Lock Nut Pt No.47,-Spares For Bottom Ash Slurry Pump Model:Ar-150/500,Ahp , Wear Plate(Bs) Sp. For Bottom Ash Slurry Pumpmodel:Ar-150/500 Part No- 16 , Wear Plate(Ss) Sp. For Bottom Ash Slurry Pump Model Ar 150/500 For Ahp Part No- 19 , Gland - Spares For Bottom Ash Slurry Pump, Model:Ar-150/500 -For Ahp Part No- 10 , Housing Gland -Spares For Bottom Ash Slurry Pump, Model:Ar150/500 Part No- 9 , Pully Ppump Small Pcd 510Mm Spares Fly Ash Slurry Pump Model Ar 150/500A , Lock Washer Pt No 48 Sp For Fly Ash Slurry Pump Model No Ar 150/500A , Flange Countersp. For Fly Ash Slurry Pumpmodel:Ar-150/500A , Bearinghousingset , Part No. 3 , Model-Ar 150/500A , Lock Washer Pt.No.48 ,Model:Ar150/500,Sam Make ,Spares For Bottom Ash Slurry Pump Ahp , Bracketside Cover , Part No. 25 , Model-Ar 150/500A , Casing Outer Set Top & Bottom Sp For Pump Model Ar 150/500A Fly Ash Surry Pump Ahp Part No- 20,15 , Cover Suction Sp. For Fly Ash Slurry Pump Model Ar-150/500A For Ahp Part No- 21 , Expeller , Part No. 14 , Model-Ar 150/500A , Impeller With Nut- Sp. For Fly Ash Slurry Pump Model No. Ar-150/500A For Ahp Part No- 18 & 38 , Thrower Liquidpt. No.11 Mat Astm 216 Crwcbsp. For Fly Ash Slurry Pump Model No Ar150/500A , Plate Wear(B.S.) Sp.For Fly Ash Slurry Pump Model:Ar-150/500A Part No- 16 , Pump Pulley For Bottom Ash Slurry Pump,Model-Ar150/500,O.D Dia-510Mm,I.D-90Mm,No Of Groves-04 Nos,Width-180Mm Spares For Ahp , Shaft Pump Sp. For Bottom Ash Slurry Pump Model Ar-150/500 For Ahp Part No- 4 , Sleeve Shaft -Spares For Bottom Ash Slurry Pump Model:Ar-150/500 -Ahp Part No-12 , Ring Pressure -Spares For Bottom Ash Slurry Pump Model:Ar-150/500 , Bearing Bed With Top Cover Pt No.1&2 Model:Ar150/500 -Spares For Bottom Ash Slurry Pump,Ahp , Drain Sump Pump Model: Vo-80/250+Arsa Sl No 4728 9437 9438 9439 , Bush Bearing(Star) Part No 20 Spare For Sam Make Drain Pump Model Vw 80/250+Ars For Ahp , Sleeve Coupling-Sp. For Drain Pump Model Vw80/250+ Ars For Ahp , Shaft Drive Pt No 16 Spares For Sam Make Drain Pump Model - Vw 80/250+Ars For Ahp , Housing Gland-Sp. For Drain Pump Model Vw 80/250+Ars For Ahp , Lock Nut Pt No 9 Sp For Sam Make Drain Pump Ahp , Collar Bearing -Sp. Fordrain Pump Model No.Vw-80/250+Ars , Ratchet Collar P.N: 4Aspare For Drain Pump Model Vw80/250+Ars , Housing Bush- Sp. For Drain Pump Model 6Vw 80/250+Ars For Ahp , Nut Lock Pt No.2Model:Vw-80/250+Ars ,Sam,Spares For Drain Pump Ahp , Impeller With Nut Spares For Drain Pump Model Vw80/250 + Ars For Ahp , Plate Wear(B.S.) Sp.For Drain Pump Model:Vw 80/250 Ars , Bush Bearing(P Side)- Sp. For Drain Pump Model Vw 80/250+Ars For Ahp , Shaft Pump - Sp. For Drain Pump Model Vw-80/250+Ars For Ahp , Sleeve Shaft- Sp. For Drain Pump Model Vw 80/250+Ars For Ahp , Star Support Pt No.21-Spares For Drain Sump Pump Model:Vw-80/250+Ars , Lock Washer Pt,No.-3,Model:Vw-80/250+Ars ,Sam,Spares For Drain Pump Ahp , Ratchet Pin Pt No.4, Model:Vw-80/250+Ars -Spares For Sam Make Drain Pump , Ahp , Adjusting Screw Pt No.7A, Model:Vw-80/250+Ars -Spares For Sam Make Drain Pump, Ahp , Gland Ring Set - Spares For Drain Pump Model:Vw 80/250+Ars For Ahp , Pipe Pump Column Sp.For Drain Pump Model:Vw 80/250+Ars , Bell Mouth(P.End)Sp. For Drain Pump Model Vw 80/250+Ars For Ahp , Casing Voloute Sp. For Drain Pump Model No.Vw-80/250+Ars , Ratchet Collar, Part No. 53.852 Of Sump Pump Model No. Vo 50/230+Tch+N , Bearing Housing, Part No. 36.052 Of Sump Pump Model No. Vo 50/230+Tch+N , Bush Bearing(Pump), Part No. 55.553, Sump Pump, Model No. Vo50/230+Tch+N , Volute Casing, Part No. 11.4 Of Sump Pump, Model No. Vo 50/230+Tch+N , Bush Housing, Part No. 17.3 Of Sump Pump, Model No. Vo 50/230+Tch+N , Base Plate, Part No. 90.052, Sump Pump, Model No. Vo 50/230+Tch+N , Drive Column Pipe, Part No. 72.352, Sump Pump, Model No. Vo 50/230+Tch+N , Gland Housing, Part No. 46.3 Of Sump Pump Model No. Vo 50/230+Tch+N , Gland Ring/46.9 -Spares For Sam Make Drain Pump, Model:Vo 50/230+Tch+N, Ahp , Shaft Drive/22.352 -Spares For Sam Make Drain Pump, Model:Vo 50/230+Tch+N, Ahp , Gland [1 No = 2 Halves], Part No. 46.4 Of Sump Pump Model No. Vo 50/230+Tch+N , Impeller Nut, Part No. 93.4, Sump Pump, Model No. Vo 50/230+Tch+N , Impeller, Part No. 24.2 Of Sump Pump, Model No. Vo 50/230+Tch+N , Lantern Ring, Part No. 46.10 Of Sump Pump Model No. Vo 50/230+Tch+N , Lock Washer (Shaft), Part No. 94.053 Of Sump Pump Model No. Vo 50/230+Tch+N , Lubrication Pipe Line, Part No. 71.752, Sump Pump, Model No. Vo 50/230+Tch+N , Nut Lock/93.152 Sp For Sam Make Drain Pump Model Vo 50/230+Tch+N Ahp Unit 4 , Nut Lock/93.153 Sp For Sam Model Vo 50/230+Tch+N Ahp Unit 4 , Pump Column Pipe, Part No. 72.354, Sump Pump, Model No. Vo 50/230+Tch+N , Key (Coupling) : Part No : - Na:Material : -Aisi 316 , Shaft Pump /22.3 Sp For Sam Make Drain Pump Model Vo 50/230+Tch+N+Ahp Unit 4 , Key (Bearing Collar): Part No : -Na: Material : Aisi 316 , Casing Volute Pt No.11.4 -Spares For Bottom Ash Overflow Transfer Pump, Model:Vo 80/340+Ars,Ahp , Impeller Pt No.24.2-Spares For Bottom Ash Overflow Transfer Pump, Model:Vo 80/340+Ars,Ahp , Nut Impeller Pt No.93.4 -Spares For Bottom Ash Overflow Transfer Pump, Model:Vo 80/340+Ars,Ahp , Nut Lock Pt No.93.153 -Spares For Bottom Ash Overflow Transfer Pump, Model:Vo 80/340+Ars,Ahp , Plate Wear Pt No.14.7 - Spares For Bottom Ash Overflow Transfer Pump, Model:Vo 80/340+Ars,Ahp , Pump Bottom Ash Over Flow Transfer Sump Pump Type:Vo 80/340+Ars, Size:100X80mm, 1450Rpm,15Kw Motor, Direct Drive , Make Sam Turbo Industries Ltd. -Spares For Ahp U#4 , Shaft Single Pt No.22.352 -Spares For Bottom Ash Overflow Transfer Pump, Model:Vo 80/340+Ars,Ahp , Shaft Sleeve (P. End) Pt No.53.5 -Spares For Bottom Ash Overflow Transfer Pump, Model:Vo 80/340+Ars,Ahp , Bush Bearing (Pump) Pt No.55.553- Spares For Bottom Ash Overflow Transfer Pump, Model:Vo 80/340+Ars , Shaft Sleeve (P End) Part No. 53.5, Sump Pump, Model No. Vo 50/230+Tch+N , Bush Housing Pt No.17.3 -Spares For Bottom Ash Overflow Transfer Pump, Model:Vo 80/340+Ars,Ahp , Washer Lock Pt No.94.053 -Spares For Bottom Ash Overflow Transfer Pump, Model:Vo 80/340+Ars,Ahp , Plate Wear (Suction Side ) 19 Nihard Type Iv Sam Sp Fly Ash Slurry Pump Model Ar 150 510A Ahp/Spare For Ash Slurry Pump Model For Unit # 4: Ar 150/510-Existing Pump Serial No. 15200,15199 & 14955-Wear Plate (S.Side)/19 -Material- Nihard Type Iv , Cover Suction Astm 216 Gr Wcb/21 Sp Sam Model No Ar 150/510A Ahp Unit 4 , Star Support, Part No. 31.152 Of Sump Pump Model No. Vo 50/230+Tch+N , Strainer, Part No. 63.03, Sump Pump, Model No. Vo 50/230+Tch+N , Ash Slurry Drain Pump, Type:Vo 50/230+Tch+N, Size:80X80, 1450Rpm, -Spares For Ahp U#4 , Bearing Bed, Part No. 35.152, Sump Pump, Model No. Vo 50/230+Tch+N , Bearing Collar, Part No. 53.952 Of Sump Pump Model No. Vo 50/230+Tch+N , Lock Washer (Shaft) - Spares For Vo 150/400+Tch+N , Bush Bearing (Pump) - Spares For Bottom Ash Overflow Transfer Pump (U#5&6) Model-Vo 150/400+Tch+N , Bush Bearing (Star)- Spares For Bottom Ash Overflow Transfer Pump (U#5&6) Model-Vo 150/400+Tch+N , Bush Housing - Spares For Bottom Ash Overflow Transfer Pump (U#5&6) Model-Vo 150/400+Tch+N , Coupling Sleeve Set - Spares For Vo 150/400+Tch+N , Drive Shaft - Spares For Vo 150/400+Tch+N , Gland Housing - Spares For Vo 150/400+Tch+N , Gland Ring - Spares For Vo 150/400+Tch+N , Impeller - Spares For Vo 150/400+Tch+N , Impeller Nut - Spares For Vo 150/400+Tch+N , Latern Ring - Spares For Vo 150/400+Tch+N , Pump Shaft - Spares For Vo 150/400+Tch+N , Lock Nut(Shaft) - Spares For Vo 150/400+Tch+N , Lock Nut (Brg Collar) - Spares For Vo 150/400+Tch+N , Lock Washer (Brg Caller) - Spares For Vo 150/400+Tch+N , Bottom Ash Overflow Transfer Pump Including Base Plate ,Coupling Foundation Bolts Column And Delivery Pipe Star Support &Strainer And Without Motor Pump Model-150/400+Tch+N , Lock Nut(Shaft) Spares For Vo 80/400+Tch+N , Lock Nut (Brg Collar) - Spares For Vo 80/400+Tch+N , Lock Washer (Shaft) Spares For Vo 80/400+Tch+N , Rachat Collar Spares For Vo 80/400+Tch+N , Strainer For Fly Drain Pump Mod-Vo 80/400+Tch+N , Shaft Sleeve (P.End) - Spares For Vo 80/400+Tch+N , Ratchet Collar - Spares For Vo 150/400+Tch+N , Single Shaft - Spares For Vo 80/400+Tch+N , Bearing Housing - Spares For Vo 80/400+Tch+N , Volute Casing - Spares For Vo 80/400+Tch+N , Brearing Collar - Spares For Vo 80/400+Tch+N , Bush Bearing (Pump) - Spares For Vo 80/400+Tch+N , Bush Housing - Spares For Vo 80/400+Tch+N , Coupling For Fly Ash Drain Pump, Mod. Vo-80/400 + Tch +N , Gland Housing - Spares For Vo 80/400+Tch+N , Impeller - Spares For Vo 80/400+Tch+N , Shaft Sleeve (P.End) - Spares For Vo 150/400+Tch+N , Impeller Nut - Spares For Vo 80/400+Tch+N , Latern Ring - Spares For Vo 80/400+Tch+N , Bare Pump For Pump Model V0 80/400 +Tch +N Including Base Plate,Coupling,Bolts,Column And Delivary Pipeupto Sole Plate And Strainer Without Motor... , Strainer For Ash Slurry Drain Pump Mod-100/260+Tch_N , Base Plate For Ash Slurry Drain Pump Mod-100/260+Tch+N , Lantern Ring - Spares For Vo 100/260 +Tch+N , Gland Housing Spares For Vo 100/260 +Tch+N , Impeller Nut - Spares For Vo 100/260 +Tch+N , Lock Washer (Shaft) - Spares For Vo 100/260 +Tch+N , Bearinghousing - Spares For Vo 100/260 +Tch+N , Star Support - Spares For Vo 150/400+Tch+N , Single Shaft - Spares For Vo 100/260 +Tch+N , Lock Nut(Shaft) - Spares For Vo 100/260 +Tch+N , Rachet Collar - Spares For Vo 100/260 +Tch+N , Volute Casing - Spares For Vo 100/260 +Tch+N , Bearing Collar - Spares For Vo 100/260 +Tch+N , Lock Nut (Brg Collar) - Spares For Vo 100/260 +Tch+N , Impeller - Spares For Vo 100/260 +Tch+N , Housing - Bush Pump Model Vo 100/260 , Ash Slurry Drain Pump, Model V0 100/260 +Tch +N Including Base Plate,Coupling,Bolts,Column And Delivary Pipe Upto Sole Plate And Strainer Without Motor.. , Eye Bolt For Ash Disposal Pump Mod. Ar 150/510 , Volute Casing - Spares For Vo 150/400+Tch+N , Key Coupling For Ash Slurry Disposal Pump,Mod-150/510 , Lock Nut For Ash Disposal Pump,Model-150/510 , Grease Nipple (1St=2 Nos)Ash Slurry Disposal Pump Model-150/510 , Dome Nut (Pt. No.33) Material: Bs970,En-8,For Spares For Ash Slurry Pump,Type:Ar 150/510,Cap:620 M3/Hr,Head:35 Mwc,Size:200 X 150,Speed:870 Rpm , Grease Retainerfor Ash Slurry Disposal Pump Mod-Ar 150/510 , Outer Casing Set. (1 Set Consists Of Outer Casing (Top)/20=1 No., Outer Casing (Bottom)/15=1 No., ) Material-Is 210 Fg 260 , Expeller Key /31 , Bearing Housing - Spares For Vo 150/400+Tch+N , Is 210 Fg 200, Pump Pulley O D:611 Mm I D:80Mm Width:140 Mm No.Of Grooves:5Nos, Spares For Ash Slurry Pump Model For U#5&6: Ar150/510 , Suction Cover /21 - Spares For Pump Ar 150/510 , Bracket Side Cover /25 - Spares For Pump Ar 150/510 , Expeller/14 - Spares For Pump Ar 150/510 , Shaft Sleeve /12 - Spares For Pump Ar 150/510 , Coupling Between Fluid Motor(Od- 280 Mm)For 150/510 , Coupling Between Gear Box And Fluid Gear Box Dia 220 - Spares For Ash Slurry Pump Model Ar 150/510 , Coupling Between Pump And Gear Box Dia 280 - Spares For Ash Slurry Pump Model Ar 150/510 , Rubber Gasket ( Suction Cover) (Pt.No. 59) Material: Neoprene Rubber (10T),For Spares For Ash Slurry Pump,Type:Ar 150/510,Cap:620 M3/Hr,Head:35 Mwc,Size:200 X 150,Speed:870 Rpm , Ring Lantern, Spares For Ash Slurry Pump. , Bearing Cap - Spares For Vo 150/400+Tch+N , Is 210 Fg 200, Motor Pulley Od:386Mm, I D:90Mm, Width:140Mm, No.Of Grooves:5 Nos, Spares For Ash Slurry Pump Model For U#5&6: Ar150/510 , Piston Ring Set /51 (1Set = 4Nos) - Spares For Pump Ar 150/510 , Flange (Suction Cover)/70 - Spares For Pump Ar 150/510 , Impeller With Nut /18 - Spares For Pump Ar 150/510 , Inner Casing /(Volute)/17 - Spares For Pump Ar 150/510 , Wear Plate (S.Side)/19 - Spares For Pump Ar 150/510 , Wear Plate (B.Side)/16 - Spares For Pump Ar 150/510 , Expeller Housing/9, Alloy Ci, Spares For Ash Slurry Pump Model For U#5&6: Ar150/510 , Split Gland /10 - Spares For Pump Ar 150/510 , Lay Brinth (De)/ 14 D - Spares For Pump Ar 150/510 , Bearing Collar - Spares For Vo 150/400+Tch+N , End Cover/5. Material Is 210 Fg 200 , Ratchet Pin Set (1 Set = 2 Nos): Part No : -53.752: Material : Aisi 410 , Strainer For Bottom Ash Overflow Transfer Pump Mod-Vo 150/400+Tch+N , Coupling Set (Od- 220 Mm)For 150/400 , Eye Bolt ( 1Set = 4 No.) For Bottom Ash Overflow Transfer Pump Mod No.- 150/400 + Tch + N , Gland Split (1 No=2 Halves)For Ash Slurry Disposal Pump Model-Ar 150/400 , Baotp Coupling Pin , Nut & Bush , Drive Column Pipe: Part No: 72.352: Material: -Is 1239 Part I Heavy , Pump Column Pipe: Part No : -72.354: Material : Is 1239 Part I Heavy , Drain Pump (Vacuum Pump House), Model- Vo 80/400 +Tch + N- Gland Ring, Material: Is 318 Gr 2, Part No:46.9 , Eye Bolt ( 1Set = 4 No.) For Ash Slurry Drain Pump Mod. No. - 100/260 + Tch + N , Gland Housingfor Ash Slurry Drain Pump 100/260 , Gland Ring For Ash Slurry Drain Pump Mod-Vo 100/260+Tch+N , Eye Bolt (1 Set = 4 No.) For Fly Ash Drain Pump Mod. No. - 80/400 + Tch + N , Lanternring For Ash Drain Pump Mod-Vo 80/400+Tch+N , Lock Washer (Brg Caller) - Spares For Vo 100/260 +Tch+N , Shaft Sleeve (P.End) - Spares For Vo 100/260 +Tch+N , Bush Bearing (Pump) For Ash Slurry Drain Pump Mod. No.- -100/260 + Tch + N , Bearing Cap - Spares For Vo 100/260 +Tch+N , Coupling Set (Od- 140 Mm)For 100/260 , Motor Pulley (Od-386 Mm,Groove-04 No.Spare For Ash Slurry 150/510 , Bracket Side Cover (Pt.No. 25), Astm A216 Grade Wcb, For Spares For Ash Slurry Pump,Type:Ar 150/510,Cap:620 M3/Hr,Head:35 Mwc,Size:200 X 150,Speed:870 Rpm , Complete Assembly Of Clarifier Sludge Pump, Make: Sam Turbo, Model:Ars 50/210, Capacity- 60 M3/Hr, Head- 12 M,Rpm- 1450 , Pump Shaft Of Clarifier Sludge Pump, Part No.- 4, Make: Sam Turbo, Model: Ars 50/210 , Adopter (Coupling Side) Of Clarifier Sludge Pump, Part No.- 5, Make: Sam Turbo, Model: Ars 50/210 , Inner Brg.Cap (Adopter) Of Clarifier Sludge Pump, Part No.- 5A, Make: Sam Turbo, Model: Ars 50/210 , Bearing Bed Of Clarifier Sludge Pump, Part No.- 1, Make: Sam Turbo, Model: Ars 50/210 , Inner Bearing Cap Of Clarifier Sludge Pump, Part No.- 6, Make: Sam Turbo, Model: Ars 50/210 , Liquid Thrower Of Clarifier Sludge Pump, Part No.- 11, Make: Sam Turbo, Model: Ars 50/210 , Gland Of Clarifier Sludge Pump, Part No.- 10, Make: Sam Turbo, Model: Ars 50/210 , Pressure Ring Of Clarifier Sludge Pump, Part No.- 10R, Make: Sam Turbo, Model: Ars 50/210 , Sleeve Of Clarifier Sludge Pump, Part No.- 12, Make: Sam Turbo, Model: Ars 50/210 , Gland Packing Of Clarifier Sludge Pump, Part No.- 56, Make: Sam Turbo, Model: Ars 50/210 , Lantern Ring Of Clarifier Sludge Pump, Part No.- 13, Make: Sam Turbo, Model: Ars 50/210 , Gland Housing Of Clarifier Sludge Pump, Part No.- 9, Make: Sam Turbo, Model: Ars 50/210 , Expeller Of Clarifier Sludge Pump, Part No.- 14, Make: Sam Turbo, Model: Ars 50/210 , Wear Plate (B.Side) Of Clarifier Sludge Pump, Part No.- 16, Make: Sam Turbo, Model: Ars 50/210 , Inner Casing Of Clarifier Sludge Pump, Part No.- 17, Make: Sam Turbo, Model: Ars 50/210 , Impeller With Impeller Nutof Clarifier Sludge Pump, Part No.- 18 & 38, Make: Sam Turbo, Model: Ars 50/210 , Suction Flange Of Clarifier Sludge Pump, Part No.- 22, Make: Sam Turbo, Model: Ars 50/210 , Wear Plate ( B.Side) : Part No:- 16 :Material: - Astm A 532 Class Iii Type A Hichrome / Nihard Type Iv (550 Bhn) , Delivery Flange Of Clarifier Sludge Pump, Part No.- 23, Make: Sam Turbo, Model: Ars 50/210 , Bracket Side Cover Of Clarifier Sludge Pump, Part No.- 25, Make: Sam Turbo, Model: Ars 50/210 , Clamp Of Clarifier Sludge Pump, Part No.- 61, Make: Sam Turbo, Model: Ars 50/210 , Lock Nut Of Clarifier Sludge Pump, Part No.- 47, Make: Sam Turbo, Model: Ars 50/210 , Lockwasher Of Clarifier Sludge Pump, Part No.- 48, Make: Sam Turbo, Model: Ars 50/210 , Key.(Coupling) Of Clarifier Sludge Pump, Part No.- 32, Make: Sam Turbo, Model: Ars 50/210 , Key (Sleeve) Of Clarifier Sludge Pump, Part No.- 31, Make: Sam Turbo, Model: Ars 50/210 , Breather Plug Of Clarifier Sludge Pump, Part No.- 26, Make: Sam Turbo, Model: Ars 50/210 , Pin And Bush Coupling (Dia180) Of Clarifier Sludge Pump, Make: Sam Turbo, Model: Ars 50/210 , Oil Drain Plug Of Clarifier Sludge Pump, Part No.- 55, Make: Sam Turbo, Model: Ars 50/210 , Outer Casing (Top) (Pt.No. 20 ), Outer Casing (Bottom) (Pt. No. 15)Material: Is210, Fg 260,For Spares For Ash Slurry Pump,Type:Ar 150/510,Cap:620 M3/Hr,Head:35 Mwc,Size:200 X 150,Speed:870 Rpm , Lantern Restrictor For Ash Slurry Disposal Pump Mod-Ar 150/510 , Pump Pulley(Od-651 Mm,Groove-04 No.)Spare For Ash Slurry 150/510 , End Coverfor Ash Slurry Pump, Mod.- 150/510 , Bearing Housing Mat Is210fg200 /Spare For Ash Slurry Pump Model For Unit # 4: Ar 150/510-Existing Pump Serial No. 15200,15199 & 14955-Bearing Housing/3-Material-Is 210 Fg 200 , Complete Pump Without Motor Model - Tch+N 25/230 , Bearing Housing For Over Head Filter Water Tank Filling Pump Mod. No.-50/300 , Sam Turbo Make, Model:Vo 50/300+Tch+N, Cap:35 M3/Hr, Head:26 Mwc/Mlc , Sludge Pump Without Motor & Acc Model No. 100+Tps+N
|